I don't get iis option in the Add/Remove windows components window

Similar Questions

• my computer is connected to a new projector with a DVI and HDMI cable, and return the currency I installed correctly but I don't get a picture on the projector

  I connected my computer to a new projector with a DVI and HDMI cable, and return the currency I installed correctly but I don't get a picture of the projector, need HELP.

  Hi Bill,

  Thanks for asking this question to Microsoft Community.

  I will definitely help you to set up the projector, but before starting, I would ask you some troubleshooting questions.

  What version of the Windows operating system is installed on the computer? Do you get any error messages? Have you done a recent software or changes to the material on the computer?

  Here is a link that provides information on connecting to a projector. Go through it and check if it helps.

  Hope this information is useful and provide us with more information for further assistance. We will be happy to help you.

• Printer installation tries to install e-printer on a netbook... don't get a message on the spooler service. What is the spooler service?

  Try to install e-printer on a netbook... don't get a message on the spooler service.  What is the spooler service?

  Hi Pat,

  Spooler service manages print jobs by saving in a queue and submit them to the printer in order specified instead of sending them directly (which can cause the printer back up if too is sent at a time depending on how printing is setup and the printer works).

  Try the simple fix to see if it works.  Go to start / Control Panel / Administrative Tools / Services and place you on print spooler and double-click it.  Click the Dependencies tab, go to all the services listed there and confirm that they are automatic and started.  If this is not the case, change it to automatic, and then restart them.  Once finished, return to the print spooler and set it to automatic and start it.  Click OK and close out Services and control panel and restart.  When you come back, come back to Services and check that the print spooler again told automatic and started.  If this isn't the case, after back and let's check other things.  If so, proceed to the installation of the printer, and this particular problem should no longer be a problem.

  I hope this helps.

  Good luck!

• When I download adobe after affects cc 2015 after approximately 87 percent done I get error and stop the download how to fix this?

  When I download adobe after affects cc 2015 after approximately 87 percent done I get error and stop the download how to fix this?

  Hi Giovannil27088677,

  If you're still having trouble installing it, please refer to the following thread Photoshop CC install hangs at 48%

• Why I don't get a response from the Dept. serial number already contacted them twice with ZERO response. I have included my product code and proof of my job as requested but nowt back! ??

  Why I don't get a response from the Dept. serial number already contacted them twice with ZERO response. I have included my product code and proof of my job as requested but nowt is back!

  Kingussie81 that I saw the account that you used to post on this public forum and your Creative Suite 5.5 Design Premium education serial number is registered under your account at http://www.adobe.com/.  For more information on how to locate your serial number registered please see quickly find your serial number.

  If you need to download a new copy installation files, they are available to Download CS5.5 products.

• How can I register a message of success to a drag and drop interaction - I don't see this option in the Actions on the possibilities of success and it cannot know?

  How can I register a message of success to a drag and drop interaction - I don't see this option in the Actions on the possibilities of success and it cannot know?

  Hide you this way:

  

• This summer, I bought a computer with Vista. Will I get a refund for the upgrade to Windows 7?

  This summer, I bought a computer with Vista.  Will I get a refund for the upgrade to Windows 7?

  See: Frequently asked questions - Upgrade Options
  http://www.Microsoft.com/Australia/Windows/buy/offers/upgrade-FAQ.aspx TaurArian [MVP] 2005-2010 - Update Services

• Whenever I try to open the Add/Remove Programs folder I get an exception and cannot access it?

  Windows XP, SP3, IE8... Since Saturday, whenever I try to access the Add Remove Programs, I have ' exception occurred at the "C\WINDOWS\systerm32\shell21.dll,Control_RunDLLappwiz.cpl", and I can't access it to add or delete anything... (I recently reformatted the computer) abput 3 weeks ago) and everything was going well so far... using System Restore to a point where I knew it was patch work it? (this would be my last!) ... or running the scandisk on start up option can fix this?... any help would be appreciated... of course don't want to have to reformat again!... someone else asked me that maybe one of the "updates" I put in recently may have caused?

  Lynxstch,

  Hello and thank you for visiting the Microsoft answers community.

  I've included some knowledge base articles that may help you:

  Incorrectly, Add/Remove Programs tool displays installed programs

  XP system restore

  I have also included a 3 part of the article, but does not guarantee to this topic:

  http://www.LIUtilities.com/products/wintaskspro/dlllibrary/wizcpl/

  I also suggest creating backup before starting to make changes.

  Good luck and I hope this helps.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to remove a program that is not in the Add/Remove list of

  I deleted an add/remove program of & thought later that I had removed that badly.  . I restored it from the trash, but it is not in the Add/Remove list.

  Through 'search' I found but don't know where it is.in my files was my original action of removing correct & now I want to remove again but cannot find a way to get it uninstalled.    Hope you can help thank you Gormaur

  You can use Revo Uninstaller to remove an installed program are not not in the control panel.

  Revo Uninstaller - follow the link and download the free version:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  I deleted an add/remove program of & thought later that I had removed that badly.  . I restored it from the Recycle Bin

  When you uninstall a program via Add/Remove Programs, it will not in the trash.

• Error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer.

  Original title: trying to download

  WinXP SP3, Security Scan run and d/ld: error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer. What to do now would be much appreciated.

  Also have a related problem about MS Maliciouws software removal tool. For download, but read in the KB that: in XP, the vacuum cleaner will remove the malware, but doing so may trigger the File Protection Win with damages to my operating system.  the tool will attempt to repair the damage, but to rehabilitate prior to infection, that I need to insert the CD of Win. As my computer came with Windows preinstalled, I do not have a disk and will not take the risk of damage, that I can't fix. Do I not download or not... ? Another solution... ?  I also fear that this tool could settle into the routine Win Update and need guidance on the prevention of this facility, if possible, or what to do if it cannot be prevented.

  It can have nothing to do with any of the foregoing. " I'm relaying only because it occurred during the same mission of update: had msg of error that Win Firewall has not been set as a default, which reset, but found this hidden file when searching for the Protection of the customer: "Win 32/Hackdef' - it was a config with the extension ini file and was deleted by Scan."

  Thanks a lot for any assistance.

  scate 39

  Hello

  ·         You have Microsoft Security Essentials on your computer?

  If you have windows installed on your computer security essentials, then you will not be able to install Windows defender. Windows Security Essentials has antispyware component installed.

  You get the error because you have installed MS Security Essentials, which has its own function to antimalware. You don't need or want to install Windows Defender, too. Leave MS Security Essentials installed and do not turn it off.

  See also:

  You can turn on or turn on the firewall in Windows XP, please see the link below:

  http://support.Microsoft.com/kb/283673

• Generic icon in the Add/Remove Programs list

  Hello to you all, useful forum fans!

  I have a nice custom icon that I built in my specs of the executable version, but when I use an installer to install my program, the icon in the Add/Remove Programs list is the software generic one (with the box open and CD).  How can I get my custom icon to use in the list as well?  I'm using LabVIEW 8.5.1 (and wishing my company should pay for 2010! ).

  Thanks for your help,

  -Joe

  
  

• I can't add a component from the Add Remove program window as says could not initialize winxp

  I can't add a component from the Add Remove program window as says could not initialize winxp

  My victory is xp professional ver 2002 service pack 3

  It's usually easy to fix, but if you removed all the dll and inf files, you can have a bunch of other problems that you have not yet discovered.

  If you mean when you try to use Add/Remove Windows components you see a message like this:

  Install was not able to load the master file.
  The application could not be initialized.

  This happens because this file is missing:

  c:\windows\inf\sysoc.inf

  There is no copy backup of this file on your system and run the System File Checker will not replace the missing file (sorry, that Microsoft committed Support Engineer 'experts').

  You will need to get a real copy of your XP bootable installation CD or from a reliable source.

  There's a copy on my SkyDrive, you can download - here's how:

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, put a copy of the file in this folder (assuming that Windows is installed on your C drive):

  c:\Windows\Inf

  Here is the link to my SkyDrive and you can get the file you need here:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file named sysoc when the name of the file should really be called sysoc.inf (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You must then copy and paste the downloaded folder appropriate on your system.

• Miss me the windows system32 rundll32.exe. I can't access the Add/Remove in the control panel.

  original title: missing file

  Miss me the windows system32 rundll32.exe. I can't access the Add/Remove in the control panel.

  I tried to start - run with my c/d operating system

  I checked for viruses

  I purchase software to remove etc and REG files.

  Now that the devil do?

  Thank you

  If this

  I tried to start - run with my c/d operating system

  means that you have tried to use sfc/scannow from start > run, your experience is not surprising.  This 'solution' is often suggested by people who don't really understand what this command does.  It does not help to restore a missing rundll32.exe file.

  For what is

  I checked for viruses

  What is the name and version of your anti-virus application?  When (approximately) their subscription expires? What other antimalware applications installed?  What other antimalware applications you used recently to scan your computer?

  If you have not yet used the "software to remove the REG files and etc." return for refund or throw it out.  "Registry cleaners", 'tuners', etc. are not useful.  If you used to "clean" the registry, use its "undo" feature (if it has one) to restore the registry.  Longtime MS MVP PA Bear:

  TIP: If you still think again your registry database must be cleaned, repaired, amplified, to the point, healed, twisted, fixed, enlarged, "swept" or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

  What probably happened is that your antivirus application deleted or quarantined in your file rundll32.exe thinking he was infected.  He could have, but probably not.  In any case, read the post that begins, "That 'solution' is not on my list." in the following thread: http://answers.microsoft.com/en-us/windows/forum/windows_xp-performance/systemrundllexe-not-found/6e30aff2-a88e-4d86-a654-753d54f632d1 you can also read the rest of the posts in this thread.

  Note that c:\windows\system32\dllcache is a hidden folder, but you who type in the address bar of Windows Explorer (or copy and paste), the folder should open anyway.

  Assuming you manage to restore rundll32.exe, download, install, update and run full scans (not at the same time) with each of the following free tools.

  MalwareBytes AntiMalware
  SUPERAntiSpyware

• I can't delete some programs of HP printer by using the Add/Remove

  Add/Remove programs.

  I have some HP printer programs that I can't remove by using the Add/Remove in the control panel. Any suggestions please.

  Hi NeilOsborne,

  1. what happens when you try to remove the program in Add/Remove program?

  2. do you get an error message?

  Follow the steps in the article.

  How to manually remove programs from the add tool / remove programs

  http://support.Microsoft.com/kb/314481

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

  Error message when removing program with Add/Remove programs

  http://support.Microsoft.com/kb/141697

• How can add you a program that was not listed in the Add/Remove Programs list?

  I tried to remove a program from your laptop using Add/Remove software. He said the software appear to no longer be installed and asked me if I wanted to remove it from the list. I said yes and then discovered that the program is still there, but on another logical partition. How can I get this program show up on top of the Add/Remove software list?

  Reinstall it.