I don't hear Roland 501 Piano during playback when recorded in Logic Pro.

Similar Questions

• Audition 2.0 freezes during playback and recording

  Hello

  Audition 2.0 has started to freeze for a moment during playback if you change a file.  It happens almost every time I touched the game after the removal of a segment of the file.  It also occasionally freezes during recording, but nowhere near as often as when editing.  This problem has appeared recently.

  Audition 2.0

  Windows 10 home

  AMD Phenom 2.70 GHz

  16.0 GB

  64 bit

  Any suggestions?

  Thank you.

  Jay Newell wrote:

  As I was playing around with it tonight, I noticed the problem only happens when I'm working on the @44 recorded files. 1 K and not on record @48 files K (these are the rates only 2 I save to).  Offers no clue?

  Oh, yes--but you might not like it.

  If it happens to a sample rate it is quite possible that the operating system (not hearing) is resampling, and it takes awhile to turn on. You probably need to do is set the native speed for your audio device on the same as the file that you are playing at the hearing. And if you need to change that at some point, you need to change the default values of the audio device again more... which is a pain.

  The absolute best solution for this is to use an external audio device, which can bypass it completely.

• Black screen during playback when using scale effect movement

  I worked on a project where using the motion effect scale with keyframes on a clip has worked fine until today.

  Now, every time I read the sequence and reach the clip with the animation of the scale, its completely black.

  I tried to make all by pressing Enter, and the chronology becomes green on top. It is always black. If I disable the motion effect in the effect controls tab, the video source appears fine.

  I tried to disable hardware acceleration of mercury, cleared the cache the preview, but it doesn't seem to help.

  Now, any type of motion effect is rendered.

  With the help of PP CC 2014.2

  By clicking the reset button next to the title of Motion fx effect in the menu effect options brought things to a sensitive State. Don't know what I did wrong to get into this lock.

• Delay during playback when switching between sequences (media pending)

  Hello guys,.
  I am increasingly frustrated with first CC lately.

  I am so under CC on a desktop PC. Basic elements: Asus X - 79 Deluxe, Intel i7 4930 K, 32 GB ram, Geforce Titan.

  OS (Win 8.1) and CC are running on an SSD. Images is on internal 7200 RPM HHDs.

  All other software (for most Davinci and Red movies) work perfectly, fast, no crash what-so-ever. So I thought that the system worked very well. But the first is a nightmare and I'm trying to figure out where she can come.

  Some problems appeared recently on the latest version, and I have not in the past.

  First of all, I faced a huge problem when opening simply clips in the project window in the Source drive. I was usually a 30 seconds 'Media pending' every time. When you work with files 1000 +, it was simply impossible to work. Oddly enough, I found a trick: when the first clip of the opening, I have this question pending Media, but (this is where it gets funny), if I do not play the clip, just stay on the first image and opened a second immediately, then the second he wouldn't issue pending media. As long as I stayed on frame 1 of each clip, I could open the following without any problem. Then, once I browse these "open first" clip, they would play fine, without delay. But once again, if I went a little further and opened a new clip (not was previously opened), I have to go through 30 seconds of waiting media again. F * boring. But, I just had to open all the clips before you start editing, and then it would work.

  But now, I have a very similar problem when I edit more on. Especially if I have several sequences, whenever I have switch from one sequence to another, it would take several seconds before the video (on the drive program) would appear. Most of the time, the player stays black, but a few times, I got the screen media on hold again.

  Then, once these data are transmitted, the reading is in every sense. The most common problem is that the video playback, but if I press the stop, the stop of the cursor on the timeline (the UI reacts to what I do), but the video continues to play... and I can press stop like a maniac, he stops playing like 20 seconds later... The user interface reacts again, I can navigate the menus etc... but just video continues to play. I have to wait a few seconds before you can start working again.

  I tried a lot of things: change the images on another disk, updating video drivers. I suspect that it is related to a relatively new cause of the function, that I never had these problems on previous creations (the 2014.2 of the pre version). But now, I just missed the deadline of a client today because the program has been so slow. You can imagine that I feel a little stressed.
  Let me know if you've been through things like this before, or if you had an idea where it may come, I would greatly appreciate your help!

  Thank you very much!

  Cédric

  Hey guys, I just come to take stock of my situation in case it might help other people.
  I have found little to chance, but I started using CC to create my offline instead of RedCine-X files. It is not a perfect solution, because they has some options that I used in RCX I did not cc.
  But basically, what I did is:

  -import all original R3D files in first. If I try to import them directly into Media Encoder, it breaks down for some reason any. But in the first it works, you must go to your folder of images and looking for file 001.R3D (cause when the files are too big/long RED them divided in XXXX001. R3D, XXXX002. R3D and first few duplicates in deadlines, as well as the 001.R3D are useful)

  - then in the project window, I select all and export, which sends to the Media Encoder without crashing

  -a from there, I create exactly the same format that I used to do in RCX, so DNxHD 36 in a containing MXF.

  and for some reason any, once I have import in first CC, these files do not have the problems that the MXFs had when they came to RCX: no delay, no current media * etc...
  so for now it works...

• Piano MIDI pedals on logic pro problems

  the pedals of my piano yamaha arius, the right and the middle ones, produce a sound when connected to logic pro X. I can't pass that off, and it drives me crazy because I can not play with pedals, which sounds terrible depends on music. The right pedal produce a E and the middle one a d. and it its really strong. I need a way to configure them to work as they are supposed to! Thank you

  Post edited by: totentanzfool

  This looks like to me MIDI controller messages being modified in MIDI Note messages. (These message numbers of control pedal, 64-127 and 66-127, correspond to these notes, and the value down to a pedal is 127, which, for a note, would be the largest value for sound intensity). Unfortunately, this can have several causes. A simple thing to try is:

  

  But don't think it will work in your case, as I suspect that the messages are sent by your Yamaha like this, so you will have to consult its manual and maybe its forums to find out what parameters to change. I guess that the Yamaha has a direct USB connection and not a separate MIDI interface?

  In any case, to check that the messages are sent by your Yamaha, download this free app:
  https://www.Snoize.com/MIDIMonitor/

  Here is an example when I type my pedal support:

  

• Logic pro 10.2.1 update - Roland A49 controller has stopped working

  I've noticed since the Logic Pro update to the latest version this morning (10.2.1) that my MIDI keyboard/controller Roland A49 unresponsive.  Whenever I run the Logic Pro application I get this message

  Create MIDI keyboard assignments

  Please select "MIDI CH 1' on your keyboard of series of Roland."

  But despite the tent everything, including resetting my A49, reinstall the drivers, logic will not respond to the keyboard. The keyboard seems to work properly but in Garageband, it seems to be related only to Logic Pro.

  Anyone else have a similar problem with the Roland A49 or similar USB keyboard/controller?   Is there a solution?

  Thanks in advance,

  Simon

  I finally found a solution to this, it might be useful for others who have problems with their controller keyboards.

  http://www.logicprohelp.com/forum/viewtopic.php?f=1&t=122225

  Concerning

  Simon

• I just got an iPhone SE. But when I make a phone call, that I don't hear so good. The volume is all

  I just got an iPhone SE. But when I make a phone call, that I don't hear so good. The volume is. How can I fix

  Did you remove the plastic that covers the face off the iPhone when you buy?

• Unable to hear sound during playback of music Web site Sampler

  Hello

  I am unable to hear any sound when trying to listen to samples of music on Amazon (for example) and also to other sites. I activated the firewall to all players of the internet, which is launch and start playing, but there is no sound.

  The volume is definitely on the speakers and I tried Windows Media Player and it plays radio and other music on my pc perfectly well. So I'm not sure about why I don't hear samples of music from websites now (I did in the past).

  An example of a link that has sample music is http://www.amazon.ca/Madeleine-Peyroux-Careless-Love/dp/B0002NRRAG

  Please can you let me know your opinion about this issue.

  Thank you

  Hello

  Have you checked whether the volume control of the sound wave and audio devices has been updated with higher level?
  This control is responsible for the volume of the music files.

• I don't hear anything

  Hey I've been trying to solve this problem since a week, with no luck.

  I don't hear anything in Skype, when I log in or when I give the word, but my friends can hear me well.

  I tried to reinstall Skype several times, whenever he says, "there was a problem downloading the Skype click to call the plugin" so I found a guide of how the installed correctly, but now it still does not work, I still can't hear.

  I have no idea what to do and im looking forward to get help here cordially [removed for privacy]

  

  In Skype, open Tools-> Options-> Audio settings. What device you selected here as your speakers? There is more than one option available in the select box? Can you hear any sound when you press the test next to the selection box?

• Skype, they see me but don't hear me

  Original title: Skype,.

  When I sign up for Skype, I have here and see them. They see me but don't hear me

  Hello

  1 Windows operating system you are using?

  2 has there been any changes made on the computer before the show?

  3. the problem only occurs with Skype?

  I also suggest you to check the levels of volume and push in the device properties in recording devices

  a. go to Start and click on Control Panel.

  b. click on her, then a new window will open.

  (c) in the new window click on the recording tab and right-click in the window and click Show disabled devices.

  d now check if the Microphone is listed there and right-click on it and choose Properties.

  e. after checking the levels of volume and thrust, check if the next volume bar microphone will move when you speak or type.

  If the problem is not resolved, please provide more information to help you best.

• Update blackBerry Smartphones - now, I don't hear anything

  I downloaded and installed the upgrade on my phone today. Everything seemed fine until I tried to make a phone call. There is no noise at all when I call someone, I can't hear them and they don't hear me. Also when I try to play mp3 files, they do not either.

  What should I do? I just want to make a phone call and I can not...

  johnnyz wrote:

  I took the battery three times and he repeats this to me.

  With the power on, you have removed the battery?

  Why try to plug headphones actually, use it, unplug it and see if it works?

• Microsoft Lifecam 5000. Whenever I'm recording video with her, during playback, I hear clicking on and a beep sound when the camera focuses

  Hello, I have problems with my Microsoft Lifecam 5000. Whenever I'm recording video with her, during playback, I hear clicking on and a beep sound when the camera is focusing. If I put it to my ear, the sound is low but I can still here it when it focuses.

  Hello

  Thanks for posting in the Microsoft Community Forum.

  I understand from your description, that you get beep when the camera is focusing.

  To better understand the question, please answer the following questions:

  1. have you made changes on the computer before this problem?
  2. is it works much earlier?

  Come back with more information to help you better.

  I suggest you to download and install the latest drivers for Microsoft Lifecam 5000 from the link provided:

  http://www.Microsoft.com/hardware/en-us/d/LifeCam-VX-5000

  You can even try recording by reducing the volume on the computer to the minimum level (mute) just to check if beep occurs.

  http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computer

  For more information, see the link below:

  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/webcam/LifeCam-Setup

  Hope the above information is helpful. If you have any question back to us, we are happy to help you.

  Thank you.

• Fade out - I don't hear it

  I am a beginner. This sounds like a basic question, but for the life of me I can't understand this. I added a Visual fade a clip in a multitrack session, using the Waveform Editor. I see the fade out. I don't hear it. My apologies if this is obvious, I'm having a lot of trouble with that, especially in troubleshooting. Surprised I can't just chatter, considering that I pay monthly for it.

  John, I'm hearing, I'm sorry. It turns out that the fade is there, it was just subtle, so I don't notice it. My apologies, the bland and the other audio settings, take some getting used to and I find than deletion, I'm not happy with is a challenge to understand how - I am a novice. I appreciate your response!

• I don't hear my selections...?

  I used to be able to use the cursor or lasso tool to select parts of the spectral frequency display and reading only these selections. I hear isn't only the selections during playback. Instead, I hear the complete waveform for the duration of my selections. Has what arrangement changed?

  I use Adobe Audition CS6 on a 27 "iMac (mid 2011) with the most recent update of OS X Lion mountains (10.8.4), 3.4 GHz Intel Quad-Core i7 (hyperclocked) with 4 x 4 GB 1333 MHz DDR3 RAM, AMD Radeon HD 6970 M 2048 MB Graphics, 2560 x 1440"

  Preferences > spectral views and put a tick in the box 'Read only selected frequencies at a spectral frequency selection'

• C50D-A-13W (PSCGWE) satellite crashes during playback of video files

  Hello

  my laptop stops during playback of flash (like youtube or facebook videos) files, and then there is a blue screen with a sad face and the following text: "(atikmdag.sys) system_thread_exception_not_handled.
  my system is windows 8.1 and I already reinstalled the display driver (I used this one: http://www.toshiba.de/innovation/dow...jsp?service=DE)

  There is no virus or maleware on the laptop.

  Thanks for the help!

  atikmdag.sys is part of the ATI graphics card driver...

  I think that the problem is caused by the graphics card... probably the ATI driver is the reason why the BSOD appears...

  The laptop was not equipped with a dedicated GPU, but the graphics card part of the Kabini A4-5000 AMD processor AMD Radeon HD 8330 done graphics card

  Perhaps you could uninstall this driver and install a new update...