I downloaded the last Adobe Flash - it is said to be successful but will not work. What he says "Manage plugins but the plugin says it is enabled, but it will not work." I have tried disabling and then enabling - without success.

Similar Questions

• no internet until I disable and then enable network connection

  From time to time when I start the pc I have no access to the internet, I don't have on any other pc will work fine. I have to disable and then enable the network connection, but sometimes this does not work either, so I check and uncheck Protocol internet version 6 then it works. How can I solve this?
  I am running windows 7 ultimate

  Hello

  Check the support site for the manufacturer of the computer and make sure that you use the latest drivers.

  If the support site has a newer version of the drivers and installed current ask drivers the most up-to-date drivers use this method.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.

• internal card reader must be disabled and then enabled in before Device Manager it will not work properly.

  Whenever I start my computer, my internal card reader must be disabled and then enabled in before Device Manager it will not work properly. I put an SD card in there and auto does not work. I check my computer and it shows that it is there, but when I double click on it to open it I get a message saying: Please insert the SD card. When I go to Device Manager and disable and enable fine orks. I tried different cards, but it makes no difference.
  I installed a different card reader, but another did the same thing. This leads me to think it's a matter of Windows.
  I tried to do a repair install, but it ends and said that the upgrade has failed?
  Anyone have any ideas on how to solve this problem.

  I am running Windows 7 Pro 64-bit. It is a Renesas controller and I use the 2.1.28.0 with firmware driver 4015.

  I'm not sure but I may have found the problem. I see where a guy here was having a similar problem and it was caused by Acronis. I recently installed Acronis 2012. I have been lucky to uninstall, but I will update this post when I do.  He was also running windows 7-64 bit on a motherboard ASUS!

  Acronis was the problem.  I uninstalled Acronis and now my card reader works as it should.  Strange!

• Corrupted downloads: I can't open files sent as attachments unless I have save first, and then too often content is damaged and unusable

  I can't open files sent as attachments unless I have save first, and then too often content is damaged and unusable. Example: application forms, data and field boxes merge so I can't read or fill them. Often these are doc files, but not always. Tried to download the same files on my work computer that I can do without any problem, so I know that the file is ok, but when I get to my computer at home they have corrupted. Any solutions would be welcome. Thanks, Kate

  Use this tutorial which is to solve 'unable to open attachments directly from Windows Mail or Windows Live Mail doc. "

  http://www.Winhelponline.com/blog/unable-to-open-doc-attachments-Windows-mail-or-WLM/

  After that, you can open it without having to record?
  If so, is he still scrambled after that you open.

  t-4-2

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• I am trying to open raw photos and it does not work I have 6 suites and photos taken on a Canon EOS Rebel SL1 creative

  I am trying to open raw photos and it does not work I have 6 suites and photos taken on a Canon EOS Rebel SL1 creative

  Hi irod,.

  Greetings.

  • Latest version of camera raw for CS 6 is 9.1
  • Check now if your camera is to 9.1 or higher
    • Devices supported by Adobe Camera Raw
  • If requires 9.2 or later, then you should switch to PS CC or use the dng converter
  • But if it is support less 9.1 then use this link to install camera aw 9.1 and then try to open pictures
    • Plugin Raw camera setup
  • If still you have questions then please paste a screenshot of the issue in more detail.

  Concerning

  Rohit

• I sent by email informing you that my computer crashed last month and now I'm ready to download the creative cloud again.  Please help me on this.  I have not used the program while paying for him.  hoping for your immediate answer on what to do. Peut

  I sent by email informing you that my computer crashed last month and now I'm ready to download the creative cloud again.  Please help me on this.  I have not used the program while paying for him.  hoping for your immediate answer on what to do. Can I download the free trial version and apply my account on it and fix it on your side?  Kindly get back to me as soon as possible because I need it for my school work and tasks.  Thank you.

  Uninstall anything cc which can be installed. »

  Restart your computer.

  clean a http://www.adobe.com/support/contact/cscleanertool.html

  Restart your computer

  install the cc desktop application, use of the desktop application cloud creative to manage your applications and services

• Cannot successfully comQosants my computer with Windows updates. I have tried disabling Norton anti-virus and firewall.

  Cannot successfully comQosants my computer with Windows updates. I have tried disabling Norton anti-virus and firewall.

  Jim Eckland

  Jim,
  In addition to the information requested, try these troubleshooting of beginning steps and let us know the results from them.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations of KB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why the screensaver stop working after a few minutes and then go to the black screen permanently?

  I use Vista Home Premium with Explorer 8. My screensaver always works for about 5 minutes and then stops and goes to a black screen. Still black screen and my screen saver active ever again until I have move my cursor to display the page I was on. The screen saver does not available parameters except to set the number of minutes, I want to start. I ran antivirus, anti-spyware-malware etc the gamet, but anything is wrong with the screen saver. I am blocked and never had this problem before. Anyone know what is happening, what is the cause and how to fix this?

  If you changed your diet plan or changed some settings for your course, it can happen.

  (1) go in the bottom right of your screen and click on the battery icon and click more power options (assuming that you have a laptop. If you don't go to the control panel (Classic view) and go into power options)

  (2) on your package (indicated by a blue dot next to it), click on change plan settings and navigate screen however turn it off for a long time, you want it to be before he turns off the screen.

  I do not recommend messing around with drivers, because when I did, it messed up my screen and ended up back where I was before she has nothing (sorry James). of couse I messed up a little and the only real problem was the catylist control center has disappeared, and when I tried to fix this, I came across problems (it looked like a safe mode without the mode without failure of words on the corners)

• where can I find my document saved that I worked from an e-mail, and then saved using backup on the Word icon?

  where can I find my document saved that I worked from an e-mail, and then saved using backup on the Word icon?

  Here are two things to try:
   
  The file is saved in the Temporary Internet Files folder. To locate the path, open the attachment to new then, and now Alt, press F, and to open the Save as window. In the save window slot, right-click on another file in the list, and then click Properties. On the general tab, copy the full path to the location. Then, open a Windows Explorer window and paste the path copied into the address field. This is where the edited file was saved.
   
  Since Christmas

  Copy this line:

  Search-MS:DisplayName=temp%20Files&crumb=ext%3AZZZ*&crumb=location:shell:cache%5CContent.IE5

  Now press Windows-E, Ctrl-Alt-D-V

  ZZZ change to the extension of the file you edited, and then press enter.

  This should show all the recently saved files in temporary Internet files with this extension. Good luck!

  PS Si the file is, please copy in your documents folder before anything else. Open the copy to work.

• XP, Firefox 5.0, Adobe Flash 23.0.0.207, Facebook. Video will not play. Plugin-container failure maybe? Recently started. Worked.

  Windows XP sp2. Firefox 5.0 (last), Adobe Flash Player 23.0.0.207 (later). I completely deleted and reinstalled Firefox and Flash Player since the problem began. I still have the problem.

  On Facebook, I am able to play the videos. He was working. I've had this problem before and was able to fix by updating to Flash Player, but that has not worked this time. It seems that this plugin-container is trying to start, but failing. There is no error message.

  Can anyone help? Best regards, Fred

  Facebook videos can use HTML5 player instead of Flash Player Plugin.

  An easy way to see if you can play HTML5 video in Firefox is to go to https://www.youtube.com/html5/ , as should be all blue checkmarks.

  Since you have the old EOL WinXP and not Vista or later, you may not be able to play HTML5 without workarounds.

  With workaround solutions, you will be able to. http://www.MSFN.org/Board/topic/175591-Enable-MP4-H264-AAC-HTML5-Video-in-Firefox-on-Windows-XP-without-Flash/

• Whenever I try to install Photoshop, the progress bar is 84% and then quits without completing the installation.  What can I do?

  Whenever I try to install Photoshop, the progress bar is 84% and then quits without completing the installation.  What can I do?

  Please see the download and installation of the below help documents:

  Download cloud creative to troubleshoot and install questions

  Adobe Creative Cloud Desktop App could not be installed error

  Download error, installation or update of Cloud Creative applications

  The problems with the installation logs

  You can also try to download from here:

  Direct download links of Adobe CC 2015 : designer Cloud 2015 release

  Guinot

• My HP Pavilion Entertainment PC will not communicate with my printer HP 309g. Suffice to say that they are connected to WIFI. I have tried wireless and connected.

  My HP Pavilion Entertainment PC will not communicate with my printer HP 309g.  Suffice to say that they are connected to WIFI.  I have tried wireless and connected.

  GR

  Since they are both HP products you the best solution is to talk to them...

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• When I download a movie I can watch it, but there is no sound. I tried different and same thing picture no sound. Help, please.

  the picture is there but not sound

  When I download a movie I can watch it, but there is no sound.  I tried different and same thing picture no sound. Help, please.

  Thank you

  miklee

  No guarantee... but installing an AC3 Filter can be
  worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  AC3 Filter
  http://AC3Filter.NET/wiki/projects/AC3Filter/releases (scroll down and try - AC3Filter 1.63 full b)

  More...

   
  What is the format of the film? If it is .avi, you can
  you need to install the Xvid codec.

  This can be checked by using the free software GSpot:

  GSpot Super quick start
  http://www.headbands.com/GSpot/v26x/Quick_Start.html
  (click to the left of the text: GSpot zip file)

  You don't have to install it... just unzip the file and
  GSpot.exe left click to launch.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  XviD Codec
  http://www.xvidmovies.com/codec/

  XviD FAQ
  http://www.xvidmovies.com/FAQ/

  Good luck...

• is it possible to set up a dual boot, so I don't have to stop, and then pass the SATA cables that I boot to change?

  Original title: Dual boot

  My XPpro on a former player, was upward. then, I got another new drive, installed Win7Ultimate.  Well, I got the OLD disk works with XP on it.  But, some of these apps DO WORK not on Win7.  so, at least for now, I have two drives installed on the same computer.  is it possible to set up a dual boot, so I don't have to stop, and then pass the SATA cables that I boot to change?   Operating systems already are on 2 different disks.

  Hello

  How to set up a Dual Boot Installation with Windows 7 and XP
  http://www.SevenForums.com/tutorials/8057-dual-boot-installation-Windows-7-XP.html

  Definitive dual-booting guide: Windows 7, Linux, Vista and XP step-by-step
  http://apcmag.com/the_definitive_dualbooting_guide_linux_vista_and_xp_stepbystep.htm

  Dual Boot computer preinstalled Windows 7 with XP
  http://www.howtogeek.com/HOWTO/8790/dual-boot-your-pre-installed-Windows-7-computer-with-XP/

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">