I downloaded the new software recently and now my Epsom printer does not work

iMac late 2009. Processor 3.06 GHz

Hi, I downloaded the new software recently and now my Epsom printer does not work and my Wi - Fi on the computer keeps dropping out.

I spoke with Epsom and they recommended to remove the drivers and reinstall them. Now, I can not install the ad pilots Wi - Fi does not work correctly. The research on this forum I see there have been many problems with the new version of the software. Can someone help me?

< re-titled by host >

Try a reboot.

Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

Isolate a problem by using a different user account

If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

Safe mode - on El Capitan

Start Mode without failure-El Capitan.

Tags: Mac OS & System Software

Similar Questions

  • I downloaded the new version today and now I cannot edit and it seems that my plan is returned to the base

    I downloaded the new version today and now I cannot edit and it seems that my plan is returned to the base

    you have installed something today from adobe, and now you cannot change something?

    If Yes and Yes, that have you installed and you want to change?

  • I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate.

    I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate how can I solve this
    I have an acer

    Diagnostic report (1.9.0027.0):
    -----------------------------------------
    Validation of Windows data-->
    Validation status: invalid license
    Validation code: 50
    Validation caching Code online: n/a, hr = 0xc004f012
    Windows product key: *-* - XY9X3 - JDXYP-6CJ97
    The Windows Product Key hash: xFQJU8srKsovk6p1Lk1yW93in4E =
    Windows product ID: 89583-OEM-7332157-00211
    Windows product ID type: 2
    Windows license Type: OEM SLP
    The Windows OS version: 6.0.6002.2.00010300.2.0.003
    ID: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF} (1)
    Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Product name: Windows Vista (TM) Home Premium
    Architecture: 0 x 00000009
    Build lab: 6002.vistasp2_gdr.110617 - 0336
    TTS error:
    Validation of diagnosis:
    Resolution state: n/a

    Given Vista WgaER-->
    ThreatID (s): n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002

    Windows XP Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002
    OGAExec.exe signed by: n/a, hr = 0 x 80070002
    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->
    Office status: 109 n/a
    OGA Version: N/a, 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->

    Other data-->
    Office details: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF}1.9.0027.06.0.6002.2.00010300.2.0.003x 64*-*-*-*-6CJ9789583-OEM-7332157-002112S-1-5-21-923204104-223683984-168055983Acer Extensa 5630 Phoenix Technologies LTD.V1.30 20090319000000.000000 + 00070333507018400FA04090409US Mountain Standard Time(GMT-07:00)03ACRSYSACRPRDCT109

    Content Spsys.log: 0 x 80070002

    License data-->
    The software licensing service version: 6.0.6002.18005
    Name: Windows Vista, HomePremium edition
    Description: operating system Windows - Vista, channel OEM_SLP
    Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
    ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 89583-00146-321-500211-02-1033-6002.0000-0042012
    Installation ID: 004511331255365043724851364501374781338933223323713385
    Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
    The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
    Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
    Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
    Partial product key: 6CJ97
    License status: Notification
    Notification reason: 0xC004F063.

    Windows Activation Technologies-->
    N/A

    --> HWID data
    Current HWID of Hash: OgAAAAEAAgABAAIAAwACAAAAAwABAAEAeqjWy6pVxGJ6f0DXhgfkNoBBsJzy9ErM1F/eG4QdrFYqhQ is

    Activation 1.0 data OEM-->
    N/A

    Activation 2.0 data OEM-->
    BIOS valid for OA 2.0: Yes
    Windows marker version: 0 x 20000
    OEMID and OEMTableID consistent: Yes
    BIOS information:
    ACPI Table name OEMID value OEMTableID value
    APIC APIC PTLTD
    FACP INTEL CRESTLNE
    HPET INTEL CRESTLNE
    START PTLTD $SBFTBL$
    MCFG INTEL CRESTLNE
    SLIC ACRSYS ACRPRDCT
    ASF!            OEMID OEMTBL
    SSDT BrtRef DD01BRT
    SSDT BrtRef DD01BRT

    Ah! -in this case, it is not necessary.

    I see from my records that a similar case has been solved by uninstalling and reinstalling the update WAT - KB971033

    Open the Windows Update - click the link view updates installed on the left of the page

    in the list, find the WAT update KB971033, and then uninstall it.

    Then restart and reinstall the update from here - http://support.microsoft.com/kb/971033

    redemarrer restart again, then try to change your product key to the one on the sticker - what is happening this time?

  • I already have an annual subscription to the export of Adobe and Adobe track, but it does not work on my new computer (Windows 10). Help, please.

    I already have an annual subscription to the export of Adobe and Adobe track, but it does not work on my new computer (Windows 10). Help, please.

    Look under Tools.

  • I upgrades the operating system of my mac to OSX 10.9.4 and now my Dreamweaver CS5 does not work, it just that closes unexpectedly.  Help, please.

    I upgrades the operating system of my mac to OSX 10.9.4 and now my Dreamweaver CS5 does not work, it just that closes unexpectedly.  Help, please.

    It turns out that my video card is the cause. I removed the accidents stopped and he

  • Satellite 5000 with Windows XP, Service Pack 1 is installed and now my sound card does not work

    Everyone knows this problem.

    I have a 5000 Satellite with Windows XP. I installed SP1 and now my sound card does not work.

    Any ideas out there?

    Does anyone have this problem?

    I reinstalled the Yamaha drive a couple of times and always the same: no sound?

    I bought this unit in Holland and it was great until the problem of Service Pack. I heard that Comcom was a dealer right here. Maybe I'll have to make to them, if I can't help here?

  • Installed Windows7 update KB2419640 and now Windows Live Mail does not work

    I installed the Windows 7 KB2419640 update and now Windows Live mail will not work.  He won't answer.  I removed the update correctly as well as other installed 1/13.  I then installed each update individually.  This has allowed to identify where the question belongs.

    Can you help me?

    I installed the Windows 7 KB2419640 update and now Windows Live mail will not work.  He won't answer.  I removed the update correctly as well as other installed 1/13.  I then installed each update individually.  This has allowed to identify where the question belongs.

    Can you help me?

    This happened to me also. Automatticly updates installed on 1-13 and caused a problem Windows Live. I restored the computer to a time before the update, but today, (1-14) he be reinstalled automatically again. Same problems up to a removal of updates. KO 2419640 & KB2454826. Not sure how to cut automatic updates and it will probably happen again.

  • My computer crashed at Mid-setting level and now my activation key does not work

    I was upgrading from Windows 8 for Windows 8 Pro and my computer is off (power cable disconnected accidentally pass my office).  After it restarts, I went to continue the upgrade, but now my activation key does not work!

    What should I do?

    Hello

    Thanks for the reply.

    (1) how many times have you tried to activate the same key?

    (2) where you bought the product key from?

    See the link below:

    How to contact a Microsoft Product Activation Center by phone

    http://support.Microsoft.com/kb/950929/en-us

    Let us know if that helps.

  • recenly put a password on my router wpa settings now my wireless printer does not work

    Hi I recenly put a password on my router wpa settings now my wireless printer does not...

    Hello

    1. what operating system is installed on the computer?

    2. don't you get error message when the wireless printer is malfunctioning?

    3. who is the manufacturer of the router and the printer?

    Check the links below as a reference.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

    http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

    Hope this information helps.

  • downloaded the new update 10 and now the 'notes' farm as soon as it opens

    This morning I downloaded the new update and now when I try to open the "notes" application, it closes as soon as I open it.  How can I solve this problem.  Thank you

    Hi xostats,

    I understand that after updating to iOS 10, you cannot open the Notes without the app crashing immediately. I know it's important to have all your apps working properly, so I'm happy to help you.

    First of all, connect to iCloud.com and make sure your notes are always present.

    If they are, we will proceed to the activation/deactivation of your Notes and turn it back on. To make this opening settings > iCloud. Here, turn off the Notes and questioned, you can remove them from your iPhone, because they are in iCloud. A time off, go ahead and turn it back on, and then test your Notes application.

    If you continue to have problems, then check the troubleshooting provided here:
    If an application you have installed unexpectedly closes, unresponsive, or will not open - Apple Support

    Thank you for using communities Support from Apple. See you soon!

  • I upgraded to ois9.3.3 and now my voice command does not work

    Yesterday, I did the upgrade of the ois 9.3.3 and since my voice command will not work.  I searched the internet for advice on how to fix but nothing that they suggest work.  How can I get rid of this upgrade and go back to what I had which works or solve this problem.  I need voice control for I can be hands-free while driving.

    Have you tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo come back? You won't lose data by doing this, but he cn cure some problems after installing new software or applications.

    Have you tried to downgrade from iOS?

  • my built in webcam used to work, but I think that one of my kids deleted something and now my web cam does not work what do I do

    my built in webcam does not work.i one of my kids deleted some how and now it does not work what do I do

    Hello

    Try doing a system restore. Go to the SEARCH bar and type system restore.
    Once the System Restore screen, select a restore point (it must be before the problem occurred), launch it. Check.
    You can also update the drivers of your computer (the webcam driver). If you do not know how to locate, you can use RadarSync to find out-of-date drivers.
    David
  • Qosmio G10 with the new graphics card and pcb - CD update tools do not work

    Hello world

    I hope you can help me. Before a few weeks, I received my Toshiba Qosmio G10 return of aid, because the laptop no longer works. So I get it back with a new graphics card and a new PCB. With my laptop I have a CD called the update tool CD and a sheet of instructions, where it says to start with this tool CD-Rom update after you have installed the Windows with the reovery CD.

    So I did, but when I know the update tool CD to put in and I start with it, the computer installs something, but after a short then it is a message that it is a different model and that I have to put a button to close Notepad. So I did it, but Windows does not start.

    Why is it so? I had done everything that has been said on the instruction sheet.

    Please help me

    Hello

    It will be interesting to find more information on this CD-Rom tool update. Are there tags Toshiba? Can you please write what is described here?

  • I move my file and now my slide show does not work? I think that something is wrong with the links here:

    < title > A sample HTML5 < /title > two-column layout

    < name meta = "description" content = "don't forget to add a 1-2 sentences describing here." >

    < name meta = "keywords" content = "don't forget to add 20 to 30 keywords important here." >

    < name meta = "viewport" content = "initial scale = 1.0, width = device-width" / > "

    < link href = "css/reset.css" rel = "stylesheet" type = "text/css" > "

    < link href = "css/style.css" rel = "stylesheet" type = "text/css" > "

    < link href = "css/slicknav.css" rel = "stylesheet" type = "text/css" / > "

    < link rel = "stylesheet" href = "css/nivo - slider.css" type = "text/css" / >

    "< link rel ="stylesheet"href="themes/default/default.css "type =" text/css"/ >

    < style type = "text/css" >

    {#apDiv1}

    position: absolute;

    left: 18px;

    top: 504px;

    Width: 909px;

    height: 96px;

    z-index: 1;

    background-color: #FFCC33;

    }

    < / style >

    " < script src =" http://cdnjs.cloudflare.com/AJAX/libs/Modernizr/2.6.2/Modernizr.min.js "> < / script > .

    " < script src =" http://AJAX.googleapis.com/AJAX/libs/jQuery/1/jQuery.min.js "> < / script > .

    "< script src="js/jquery.slicknav.min.js "> < / script >

    "< script src="js/jquery.nivo.slider.pack.js "type =" text/javascript"> < / script >

    < script type = "text/javascript" >

    {$(window) .load (function ()}

    $('#slider').nivoSlider ({}

    effect: 'fade ',.

    manualAdvance: true

    });

    });

    < /script >

    You have correctly identified the problem. To resolve this problem, you must set the links according to the new location of the files compared to the moved document.

  • I downloaded the installer of Firefox (Firefox Setup.exe), but it does not work.

    I had problems with Flash on Firefox so I decided to uninstall and reinstall Firefox.

    However, having downloaded the installer, when I try to run Firefox Setup.exe after extraction, he asks me if I want to run as the current user or change users (the current user is an administrator) and under the option I select, when I click on Ok, the box disappears and nothing else happens.

    I tried to download the installer again, but it's the same thing and I also tried to install an older version of Firefox, but exactly the same thing happens... I really hope someone can help! Thank you.

    Hello

    Also try a right click on the installer and run it as an administrator.

    Installation

Maybe you are looking for