I dropped my laptop and now the screen is yellow tint

Similar Questions

• My daughter dropped her ipad and now the screen is yellow - help!

  My daughter has recently dropped its ipad and now the screen is yellow - help!

  Screen most likely is damaged or it has hardware problem.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  If it does not help take your device at the Apple Store for further diagnosis. Good luck.

• I have mistakenly left dropped my laptop and now the screen is showing black streeks, what can I do

  I mistakenly let down my laptop and there now black streeks two big places that become long and more.  Help, please

  Hello MOTHERANGEL,

  What you describe (especially the part about the bigger) resembles the screen LCD has been damaged. Black spots appear when the liquid crystal begins to spread out of cracks, over time the task will grow and grow.

  If you have some HP ADP (protection against accidental damage), you should contact HP for repair / replacement. Otherwise, you will need to repair the screen or get it repaired.

• I recently accidentally dropped my laptop and now whenever I try to turn it on, it gets frozen on the screen with the logo of "starting windows."

  * Original title: start Windows 7

  I recently accidentally dropped my laptop and now whenever I try to turn it on, it gets frozen on the screen with the logo of "starting windows." When it disappears, the screen just goes black and nothing else happens. Logins appear not at all. I also tried to run in safe mode and safe mode with networking mode, but it has not loaded yet even to the windows splash screen. I ran Startup Repair 3 times now and he has not yet fixed my problem. I was wondering if it might have been damaged in the fall.

  Probably yes it is damaged in the case otherwise he would start.

• My Air iPad screen has locked and now the screen is black can not disable either help

  HHelp my iPad locked up Air, tried to turn it off but nothing happened and now the screen is black, what should I do?

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

• Random buttons and now the screen is tense! Help!

  Help, please!  One of my friends thought he was being funny keys at random, multiple at once, when I told him not to do so.  He pushed the buttons especially on the right side and part of the middle.  I don't know if it was a specific button or a little push at the same time that caused my screen to go wide.  Now, the screen looks stretched.  There is nothing in the settings, I found that it will change back and I don't know exactly what buttons were pushed to get there.  I really need help.  I'm horrible with computers and nothing on the web has been able to help me, YET!  I hope that someone out there knows the answer or is willing to help me understand.

  Wednesday, January 21, 2015 23:12:23 + 0000, DesperateForComputerHelp wrote:

  Help, please!  One of my friends thought he was being funny keys at random, multiple at once, when I told him not to do so.  He pushed the buttons especially on the right side and part of the middle.  I don't know if it was a specific button or a little push at the same time that caused my screen to go wide.  Now, the screen looks stretched.  There is nothing in the settings, I found that it will change back and I don't know exactly what buttons were pushed to get there.  I really need help.  I'm horrible with computers and nothing on the web has been able to help me, YET!  I hope that someone out there knows the answer or is willing to help me understand.

  Right-click on the desktop and choose screen resolution. Choose it
  the default for your screen, as resolution its documentation says you.

  And don't let ever your 'friend' near your computer again.

• I pushed buttons and now the screen one tinted sepia?

  original title: I pushed buttons and now it's all one tinted sepia?

  Hi, I was at my computer, typing, and I was trying to hold down the left button. I tried to type a letter near the shift on this side bar and I pushed buttons, and then it turned a sepia tint. I don't know what I pushed, I could have pushed the CTRL ALT FN or the WINDOWS KEY, but I'm not sure. I can't get the color back, but the computer works fine. Thank you.

  I would just add,

  No doubt, you can access your graphics card,

  Right-click on your desktop and select properties of the graph,

  Most of the sections have Restore / restore the default values listed.

  I would color enhancement would be a good place to start.

  

• I dropped my laptop and now windows starts too slowly or not at all, except in safe mode.

  Hi people out there

  I dropped my phone a few days ago and now Windows, when started normally, goes ridiculously slow and then stops before he installed the sidebar.

  It still works in safe mode with networking and the other.  Then one of my friends suggested I just get my vista disk and re-install/repair windows.  However, I am currently in Poland, and my drive is in Scotland.  Is there a way I can solve these problems with my windows?  Can I borrow a disc from a friend?  I am really attached to money at the moment then, really, to take it to a store is very much a last resort.

  Can anyone offer some (very basic please) advice on what to do?

  Thank you

  Cardno85

  You can also have problems of material thanks to a fall!

  See if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite L750 - BIOS check error and now the screen is blank

  Good yesterday my laptop was working fine and was recommended to an update of the BIOS so I downloaded and tried while he was hooked up to update the BIOS, at half way through she says check error and nothing else, I therefore closed the BIOS window thing and close the cover I did not stop the computer.

  Today, I opened the lid and just fan continues to operate and the CPU light flashing but nothing else. What should I do? I tried the F12 and F2 method, nothing happens the screen does not come on, I will try to use an external monitor later in the day, but I don't think that is the problem.

  Thanks in advance even if I'm not all green if it's a BIOS problem. The laptop is less than 6 months old.

  Hey,.

  > I'll try to use an external monitor later today, but I don't think that's the problem.
  I put also don't think the monitor is the problem if it happened since the BIOS update.

  > if this is a BIOS problem
  With other words, turned something went wrong during the update of the BIOS and now it s a BIOS problem. Updating the BIOS is always a little risky If you do the update only if it of really necessary. Don t update the BIOS if you see there is a new version, but everything is ok. Never touch a running system ;)

  In any case, now you need an ASP to get rid of this aid. Guys have to reflash the ROM module professional tools:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT/

  > The laptop is less than 6 months old
  It makes no difference if the noebook is 6 months or 6 years ;)

• I splilled li oquid liquid on my laptop, and now the text jumps to different places where the sentence and out Dyslexic...

  I Ispilled iced tea on my laptop keyboard area and now when I type, the letters jump to different areas of my text, I know its bc it wet spill of iced tea, but s antything here I CA makes type much more mormaelp, it is stil prblematic you can see.lly. o to fix it completely? The longest period of time that passes seems better.  As you can see... it's a perfect example of how my text and typing mess... and it's better that there is

  Someone knows how to fix this problem, so I can type normallt? I would be very grateful. for any advice. Thank you very much. BTW, it's a laptop from samsung. Not very old, I bought in May 2011

  Thank you, I'd be greafful for any help

  Try to leave the laptop open and off (not near a direct heat source) to allow any residual moisture to evaporate. If you had sugar in tea residue can be larger and more sticky and can make them less likely to return to normal without further intervention.

  If after a few days, it is still faulty, I suggest you get the keyboard professionally repaired/replaced.

• Z10 blackBerry dropped my Z10 and now the camera does not

  So, Yes, I dropped my new phone on the ground this morning. Everything has been ok since then except that I just went to take a picture and the screen shows just black for the main camera. When I touch the screen, he's trying to capture, but then gives me a capture failure message. There is no sign of damage on the outside, so something must have broken inside the unit. The front camera still works. Does anyone know if this would be a very costly, if not impossible? Should I just let it go?

  the rear camera is a separate component that can be replaced, ebay has them for $ 30

  video on take part

  http://www.bing.com/videos/search?q=Z10+disassemble&qpvt=Z10+disassemble&form=VDRE#view=detail&mid=7...

• my mother was dusting his keyboard while the computer was on and now the screen is turned 90 degrees sideways and doesn't know how to say back to normal. Any suggestions?

  She does not know the combo of keys that it to get the screen to turn 90 degrees.  How do correct us the orientation of the screen?

  This phenomenon of rotation screen sometimes inadvertently some keystrokes (the cat walked on my keyboard).  In your case, MOM dusted off the keyboard.

  See if you press on the keys Ctrl-Alt top/arrow down, arrow rotates screen 90 degrees at a time.

  If this does not work, we will need to know your system brand and model and see if we can look at the rotating screen for you shortcut keys.

• I recently did a full restore on my windows xp laptop and now the updates of windows do not work

  I'm totally frustrated.  I thought I was doing pretty good when I totally restore my computer as long as the plant.  but, to my surprise, I can't seem to get the updates of windows to work... Help

  Hi RoxanneQ, is required to use Windows to SP3 level out.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28
  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure
  http://support.Microsoft.com/kb/875364

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  Ref: http://taurarian.mvps.org/WU_XP/0x80240036_0x8024400A.html

• installed usb arc touch mouse on award-winning asus laptop and now the touchpad don't work, even with the mouse not connected... Help!

  I go into the properties of the mouse and it has no options for the touchpad... watch it is there, but the mouse touch arc seems to have mastered it.

  Hello

  I understand that you are facing problems with the touchpad on the computer. I understand the inconvenience.

  Let us perform the steps of troubleshooting mentioned in the following article and check if it helps.

  Mouse, touchpad and keyboard with Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Note: Update the drivers for the touchpad from the manufacturer's Web site.

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• screen went crazy rearranged all my desktop icons and now I have a yellow tint to my screen

  previously had problems with my computer acting like he wants to go to a screensaver after 20 minutes, I had put in place for lights or not.when he was wrong I couldn't back out it would freeze up on top of me.

  Hello

  Do a system restore to before that the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  http://www.computer-answers.info/maintenance/Vista/How_to_Use_System_Restore.php

  See you soon.