I feel like LV is laughing at me while I'm trying to resolve project conflicts...

I tried to look in other messages on issues while trying to resolve the conflicts, but I don't think that the cause of my problem is the same...

Here's the story-

I am reorganizing my project files on the disk and then rebuild and straighten the conflicts of this movement vi and other files on the disc project will (I've done it before without any problems... at least I am sure that I am preeettty)

in any case, after moving some files around LV is the vi that have been moved, but not all of them - so I right click on one of the vi by the proj that it can't find and select "resolve conflicts" to use the dialog box...

dialog box appears and I am totally ready to start to resolve some conflicts...

It lists each vi by name and shows the old path (where it does not find the vi) and the path where he is currently in charge of...  I select the path it is currently responsible to and click on "use the selected item.  The conflict disappears... and I feel like a real fixer conflict... until the same conflict appears immediately to the top where it was less than a second later...  I can sit here and keep clicking Next, but it keeps popping up immediately...

the hell I'm doing wrong?

Thanks for any info

-pat

Rather than move the files using the operating system and then 'find' files, use the display of files in the Project Explorer, right-click on the files to move, and then select "move the disk.

This will move the file and update the project at the same time.

Tags: NI Software

Similar Questions

  • 'Burned' fingers index to use MacBook Pro trackpad: my both hands, index fingers. which are based on the computer next to the trackpad or are used on the trackboard are painful, feel like they were burnt, and I can barely move them.  Yes, I did

    My both hands, index fingers. which are based on the computer next to the trackpad or are used on the trackboard are painful, feel like they were burnt, and I can barely move them.  I do not have this problem before, I bought my new Mac - specifications below: it hurts and I don't have a problem with my windows, iPad or Samsung Galaxy equipment operating systems computers.

    It feels like radiation leaking through the computer case.  Is the radiation involved in the chips?

    MacBook Pro

    Model identifier: MacBookPro11, 4

    Processor name: Intel Core i7

    Processor speed: 2.2 GHz

    Number of processors: 1

    Total number of Cores: 4

    (By heart) L2 Cache: 256 KB

    L3 Cache: 6 MB

    Memory: 16 GB

    Boot ROM version: MBP114.0172.B06

    Version of the SCM (System): 2.29f24

    Are you use while plugged in, I feel a buzzing in my 13-inch rMBP (12.1)

  • I have a macbook pro 13 early 2015. Now I can here a clicking sound when I move the lanes on the side mac. Feels like some hardware is loose inside. But my mac works well as well. I left about 80 days of warranty. I'd give to repair? suggestion pls

    I have a macbook pro 13 early 2015. Now I can here a clicking sound when I move the lanes on the side mac. Feels like some hardware is loose inside. But my mac works well as well. I left about 80 days of warranty. I'd give to repair? Someone had this problem? Suggestions please...

    nidgp wrote:

    I left about 80 days of warranty. I'd give to repair?

    Absolutely, examined her!  There is some kind of hardware problem.

    Ciao.

  • Is there a way I can change text entry in Apple TV like it's pathetic. The former arrangement was much better and we now have to scroll back to the text input as identification of email in every app feels like the stone age technology.

    Input test Apple tv interface is so pathetic and primitive and feels like the stone age. Its the most boring I've had in any interface computer or "smart." Is there a way to enter (say spell out) e-mail ID that cannot be recognized by voice, and that voice recognition is better compared to google.

    Use the remote app. Or wait for the future update which allows for voice text input, Bluetooth, keyboards etc.  You can always send feedback to Apple http://www.apple.com/feedback/

  • Easier nonlinear never - made feel like I'm going crazy

    Hey everybody,

    I used the non-linear curve of Levenberg-Marquardt mounting screws before with great success.  I've used a few times to adapt to complex functions with many free parameters and functions have always shone until I've created my design vi, limits and conjecture of initial setting well.  Now, I try to adapt the simplest function never and I am bombing badly.

    I have exactly 1 (ONE!) setting I'm trying to adapt.  The function that he spends is dead simple.  But how it works makes me crazy:

    1. no matter what I choose as my initial setting, I still get exactly the same result on the table "better adjust the parameters", even if by choosing different values manually, I can clearly a better fit and the residual variations

    2 no matter what, he always runs exactly 6 iterations.  This happens even if I set the tolerance of the extremely small termination, or even if I set my maximum iterations less 6 Nb!
    3. my best value will be 1e14-1e17 I think.  I was wondering if the reversal in orders of magnitude has been causing crashing the algorithm (maybe because he didn't pass the initial value enough even see a difference for the first couple of iterations or something), so I tried also to redo my function as two parameters: one being the coefficient of a number in scientific notation (with the limits between 1 and 10) and the other being the exponent (with the limits between 1 and 20).  I then treated these two parameters in the model turn them back into a single number and use THIS number in the function, but it still bombed just as badly.  I restored the example I posted to the parameter single original fit.

    I'm just completely baffled.  I admit that it is the first time that I tried to use these screws to adapt to a single free parameter.  These screws are designed only to maintain multiple parameters?  If so, why not a not my experience that I described in (3) above works or at least do something?  Also the turnaround in values causes me trouble?  I feel like I fit stuff with huge fluctuations of values before.

    The fact that I always get exactly 6 iterations, is what really makes me feel the nuts.  How is she even learning to 6 if I set the maximum number of iterations to less than that?

    I searched the forum for the last two hours looking for something like this.  Honestly, I could not find anything.  Sorry if it's a crazy stupid question that has been answered before.

    Help much appreciated!  Thank you!

    "1. no matter what I choose as my initial setting, I still get exactly the same result on the table"better adjust the parameters", even if by choosing manually different values, I can clearly a better fit and the residual changes."
    I tried to manually change the setting and found that the smallest obtained residue if the parameter has become closer to 0. In fact, I saw no change in the residue for the 37 lower parameter values or if, because of the scale of the problem. What is a better fit for you?

    The fact that I always get exactly 6 iterations, is what really makes me feel the nuts.
    Feature County includes the function for digital calculations derived partial calls, and we do not verify the number of function for termination until after the partial derivatives are calculated. By default for digital derived is central difference.

    Partial derivatives are very small in the scale of this problem.  Looks like the stepsize at each iteration is only one or two orders of magnitude above machine epsilon. Due to the relative change very low residue induced by small step size, Lev - Mar may report that it is in convergence. Strongly recommend that the scale of the problem, but this may be a moot point because a manual search for the setting seems to show that the setting tends to 0.

    -Jim

  • can you help me, l feel like creative cloud of English, but he implemented Türkis, what can l?

    can you help me, l feel like creative cloud of English, but he implemented Türkis, what can l?

    Hello Altan,

    See Change the language setting for Adobe Creative Cloud applications

    It could be useful!

    Rayyan

  • I received my annual renewal notice is imminent. However, it does not say how much I pay. How can I make a decision to continue without this knowledge? Feels like a scam?

    I received my annual renewal notice is imminent. However, it does not say how much I pay. How can I make a decision to continue without this knowledge? Feels like a scam?

    As far as I know, prices have not changed, so it's what you paid the first year.

  • Why my pictures won't download like a face on my Apple Watch?  I tried to force touch and I don't have the face of the picture under the dials.

    Why my pictures won't download like a face on my Apple Watch?  I tried to force touch and I don't have the face of the picture under the dials.

    Using Watch OS 2.1?  (Check in the app shows on your iPhone under general > software update).  If this isn't the case, update your software Apple Watch (and your iPhone if necessary software).

    You should see that face when you scroll the faces to watch.

  • The drafting of emails is small (like this) how do I expand while it remains high (the default value)?

    How to enlarge type size ansd save as default (e-mail)

    The drafting of emails is small (like this) how do I expand while it remains high (the default value)?

    I use gmail.  Browser is Firefox.

    Is not a Microsoft program, I did some work for you leg.
    http://lmgtfy.com/?q=http%3A%2f%2Femail.about.com%2Fod%2Fgmailtips%2Fqt%2Fet_font_size.htm&l=1

  • I was once known as Apple girl, but now I feel like a crab Apple stuck in a ditch! Can you get out me

    Yes, I am known as 'Daughter of Apple* ' in my small town. Everyone laughing that I'm an Apple product collector because of the many products that I have and always ready to buy from someone old phone/pad/Mac ect.  Everyone knows who come to if they want to sell their items, have questions or need assistance. Now, the so-called Apple girl is transformed into an "Apple tree" fell from the shot of the tree drifted grass on a hill and stuck in a ditch!  Day after day, trying to figure out how to get out of that ditch all day every day is the same, I do it every day trying to figure out the mystery of my iPhone 6 bought 16 GB brings in new and used less than 2 1/2 months he became all black! Of course my first assumption was that he had to settle of course is that I did. I went to make a phone call and power on a c a few hours later, and when it all began the mystery that is still not resolved and when the daughter of Apple of cities eventually MIA because, like the crabapple she is stuck somewhere and I will give up trying to figure out what to do!  There was no damage to the waters or any other damage. It is protected and a matter of proof of life from the day of purchase. I chatted online with Apple support, also spoke on the phone with Apple support. Online and telephone support from Apple were very patient and great to work with, as they tried to help me. Unfortunately, it comes to sending in Apple or make a trip of six hours round trip to the nearest place that has an Apple expert who can look at. I've never had an iPhone Act in manner and I am very confused.  I have a few iPhones that are down and works perfectly well, but it was used less than 2 1/2 months and won't do anything. I have tried the factory reset hang on to iTunes and nothing. When I put it on charge the red light at the top is not even the light until it is as if the phone doesn't even have a battery inside.  At point of customer service, said he was locked up due to the Apple ID, but already knew it wasn't the issue because who wouldn't keep the red lighting light when plugged in to charge. Is there someone who has experienced anything like this or any reason why this would happen? Any help would be greatly appreciated and help this Apple out of the pit, in which she is stuck!

    < email published by host >

    Perhaps can you explain your problem without the history of flowery back? It makes your technical support issue very had to follow. Did you drop your phone in a ditch?

    What have you tried to do? What happened when you tried? Have what troubleshooting steps you taken?

  • Feel like giving numeric values to checkboxes in figures

    I have columns of check boxes. I want to add each check box in a column and weight. Then each box in column 1 counts as 1 each 2 column counts for 2, etc. I see that the box is True, but I can't figure out how to write something like 'Add if true, 1' I am very new to the numbers, come to make simple spreadsheets. Also I was wondering is there a way perhaps to simply convert the value of the cell if the box is checked, so that rather than a full boolean (1,2,...) Any ideas would be greatly appreciated.

    Is it an iPad? If not, what Forum would you ask guests to move to?

  • 850 - 009na M1Z34EA #ABU: CPU fan for the 850-009na feel like Phoenix does not turn down after the power - on self test unless the BIOS is entered

    Hello

    I have posted responses to other posts on this topic, but thought I'd start a new thread to gather my conclusions. I'm sorry for a trial

    This PC is virtually brand new (only a few weeks now) and otherwise perform exceptionally.

    Basically, if the machine is disconnected from the power grid (i.e. the power is off at the plug or the power cord removed), when the machine is supplied then the CPU fan turns over 2000 rpm and stays there. All the other PC that I do this too, but the fan will slow down after turning upward. I know that this is done as part of the POST to check that the fan is running.

    If I go into any installation of seed, start-up or BIOS for example (i.e. by pressing ESC or F10 etc.), the fan will slow down immediately up to 700 rpm. It will stay like that until the next time the machine is started against the cold. If I shut down the PC - watch or stop - but do not cut the power supply, then the next time the machine is started, the fan is still about 700 rpm. It is not to turn up to 2 k + RPM when lit.

    As soon as I unplug, then the next time the PC boots, it will turn to the top and I have to repeat steps - off, boot, enter the BIOS, exit and continue. It is something to do with the cold start.

    Note that I don't have to do anything in the start menu - I for example go to the BIOS settings, exit without saving the changes, and the fan will still slow. It's going in the boot sector that slows down the fan.

    When the PC started out-of-the-box, I opted for the upgrade to Windows 10 during installation. I have read in various places that people had experienced after the upgrade, so I reset the machine to factory settings (Win 8.1) and have not upgraded, but the problem persisted. However convinces me that Windows 10 has been removed completely, as when I went to restore the backup image (i.e. dating back to what I had before the factory reset) there are references to 10 Windows (for example, it says 'Continue to Windows 10' as well as various food options). I do not understand UEFI so I don't know if that was involved.

    I tried to change the power plan options "Processor power management-> cooling system strategy" on the liabilities side, but no joy there.

    I think that the fan and sensors work, based on the findings below. These readings of temp and fan are taken from AIDA64

    After starting cold (current was cut, without entering the BIOS), machine runs dry without load

    Exactly the same thing--starting in cold, but go in the BIOS, do nothing and continue. Once again, no load

    This is after power off and resarting, but to let the PC network

    After the above, I used Prime95 to put the CPU support (use of 95-100%), and after an hour, the readings are:

    Note that even so, the fan was not particularly strong, but it's at 2222 rpm as in the first reading.

    If I play at 4K (the whole point of the PC ) the CPU so far got very warm, the GPU is but his fan turns up as planned.

    In conclusion, it seems that the POST has a problem because it does not slow down the fan after the test.

    I can live with let the machine always plugged into the sector (for example, most of the time) and I guess that's what most people do, but I would like to know what the problem is (for example if it's really something 10 Windows, or a bug in the BIOS/UEFI)

    Thank you very much!

    John

    Explain you a lot of people who maybe have returned their system immediately because of this? Others might judge normal sound. Not irritable average is not coming here to complain. Others might judge her so little. They simply don't like. You will never convince me that is not a BIOS problem. As the problem resolves itself when you enter manually each time. It can be reproduced every time.

  • Envy Touchsmart K204TX: Envy K203TX recovery disks can be used to retrieve a K204TX feel like?

    Hi, the first thing I did when I got my Envy cell phone, K203TX, was to create a set of recovery disks.

    Then I discovered that the laptop has several questions.

    HP sent me a technician on-site, and technology, said these problems were caused by a material defective number (display board, motherboard and the case has a defective battery lock). It helped me to return the laptop as DOA.

    The problem is, HP store couldn't make me K203TX one another, I paid like $150 and upgraded to a fancy K204 TX.

    I have now the 204TX and this laptop has no problem at all, it's as good as it can get.

    My drive recovery K203TX of envy is always with me.

    Question > can I use these discs to recover my K204TX disaster? Or I'll throw these drives and create a new set of recovery disc for this computer?

    @johnwinchester

    The 203 was 15.6 "diagonal FHD (1920 x 1080) WLED glare-backlight

    http://support.HP.com/us-en/document/c04529223

    The 204 a 15.6 "diagonal FHD WLED-backlit touch screen (1920 x 1080)

    http://support.HP.com/us-en/document/c04529254

    I would like to put the old discs but do a new series of the new laptop as he has touchscreen.

    REO

  • Vista freezes and boots when he feels like it!

    Hello

    I had the same problem for months and I am close to baldness. It's like dealing with a tempremental child!

    My computer details are:-

    I had this barely used on EBAY.

    Acer Aspire M1640

    Windows Vista Edition home premium (OEM)

    Version 6.0 Service pack 2.

    Intel Pentium (r) dual CPU E2180 @ 2.00GHz

    NVIDIA Geforce 7050 / Nvidia nForce 620i

    2.00 GB OF RAM

    32-bit operating system.

    After turning off the PC normally then restart, sometimes it crashes to the scroll to green charge bar which means I have to turn off the PC via the power switch. It can happen maybe 7 times in a row after having supported on enter the (Windows cannot start it will take to repair screen etc etc) whenever it freezes on the Green scroll bar.

    Try first to other times that we hours of trying for 3 days normally, then it will be all a system restore.

    The journal is always a hard drive error. 1 origin, something may have changed in the system config which may have caused the error.

    I tried

    1 memory not stick both no chance.

    I changed the battery MB.

    Take the hard drive in and out.

    Almost all the little tips and tricks that people mentioned anywhere on the internet, when people have similar problems.

    May not be the material such that it is practically new, I don't have much of _ on this, I like to keep it clean and running safely as I can.

    This is why it makes no sense.

    I installed the updates for a while, then stopped just in case it was that it was operating so I started again the updates.

    I am at a loss to what it could be.

    I had to use an old reliable banger with XP computer on for now, but it's really noisy!

    My Vista pc Finally, strangely, after the 3rd day of the test lights, I'm afraid to turn it off as his heart sinking when this Green bloody bar stops and I have another hours 5 or more than try.

    Help, please!

    See you soon

    Since you get a hard drive error, I think and test the hard drive. It does not matter if you think the material is new; in fact if the material is going to fail, it will usually make fast enough or go for years. Feeding by omitting also causes the symptoms you describe.

    http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

    MS - MVP - Elephant Boy computers - don't panic!

  • Feel like 110 - question of OSX WiFi SCAN configuration

    I added the printer via WPS on the WIRELESS network.

    I added the printer on the page "printers & Scan' on 'System Preferences' then click on the 'IP' icon and enter 192.168.1.4, and all is well. Printer doesn't work.

    I went to the Web page the printer and configured the IP address to be static. The same as before.

    Everything works fine now.

    BUT the question is:

    How can I add the Scan from the printer part now?

    Thank you

    Hello

    Under Printers Scanners &, click on the Plus sign button and you should immediately see the printer listed as like Hello.

    If the printer is not listed as Hello, which can occur because of a configuration of the router or limitation, any support from router Hello (aka. Multicast) and some provided with such support disabled by its default configuration.

    Please specify your model and brand of router, so I can try to guide you further.

    Shlomi

Maybe you are looking for

  • strange qnx.ui.listClasses.DropDown TypeError

    Hello.I need help, because I came across an error that I can't make any sense of.On the SDK 1.1.1 my project works very well. But I've recently updated the SDK 2.0 and there is the error.It comes to stacktrace: TypeError: Error #1034: Type Coercion f

  • force GBA v.5 to join the domain with a certain domain controller

    Hello world I try to join a CBS c. 5.3 to the domain.  My acs in A location, I can join without problem using my account. When I try to join the ACS in location B to the same domain with the same account, it does not work. I looked for the ad client

  • Exports Speedgrade support 10bits display?

    Hellojust to wonder if Speedgrade is equipped with 10-bit output via a professional video as an AMD over-pants W8100card.I ask because I have a new job with a beautiful z27x HP Dreamcolor display 10bits and above W8100.First have a display problem 10

  • E - M5 Mark II: why LR6 can't work with the full 4:3 raw image for photos taken with a different aspect ratio?

    When you import raw, Olympus E - M1 or E - M10 images taken in different proportions to the native 4:3 sensor MFT format, LR will display the chosen as culture overlay to the full image captured by the sensor. This is very useful because in post proc

  • Photoshop scripts like a api?

    Hey there!I'm looking for a way to turn a script in photoshop in a web service? I want to be able to hit api endpoint with an image and have it return the image after a bunch of predefined actions.Is it possible to do, or is there another product fro