I fell for the "eventvwr" scam and gave the appellant to control remotely from my computer.

Similar Questions

• Hi someone help please I am signing the apple tv correctly and it says the password for itunes that is incorrect. However, I am now connected from my computer and it is OK

  Hi someone help please I am signing the apple tv correctly and it says the password for itunes that is incorrect. However, I am now connected from my computer and it is OK

  Have you tried to reboot your router, correct your location settings, you use audit stage 2.

• Please help I'm looking for the dowload 10.10 update my dads computer and I can not find it! Does anyone know where could it have?

  Please help I'm looking for the dowload 10.10 update my dads computer and I can not find it! Does anyone know where could it have?

  10.10 is no longer available unless you had previously downloaded. In this case, it would be in the purchase of the Mac App Store section. Its not available for direct plus download.

  You can directly update 10.11 El Capitan.

• Resources in preparation for the review of control of B2B?

  Nobody knows all the right resources to help prepare for the review of control of B2B? I finished the course a few months ago, but have not circumvented for the exam and I'm trying to freshen up on the material.

  Hi Andy,.

  The study recommended resources will include your guides to the student, classroom exercises, and lecture notes that may have taken. Good luck to the review of 2016! PS This review should be available before the end of January.

• I'm unable to uninstall Windows Media Player 11, because it seems that the hidden folder $NtUninstallwmp11$ and its content have been accidentally deleted from my computer.

  I'm unable to uninstall Windows Media Player 11, because it seems that the hidden folder $NtUninstallwmp11$ and its content have been accidentally deleted from my computer by another software. I want to go back to the previous version of Windows Media Player (WMP10). Please let me know how to uninstall WMP11 or back to WMP10.

  Please note that the process mentioned in this MS article did not.
  http://support.Microsoft.com/kb/934372
  Thanks in advance.
  original title: impossible to uninstall WMP11

  Hello

  Try to restore the system to the date and time when the computer was working fine.

  Click on the link below.

  http://support.Microsoft.com/kb/306084

  If you are still experiencing a problem, I suggest you try to post in the link mentioned below.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

• Control budget F150 The GL has failed for the mode of control of funds

  Dear all

  What is the solution for these funds is not the code.

  Thank you

  F150 is synonymous with

  Budgetary control GL failed for the mode of control of funds

  You should check if you have enough funds in the GL.

  Thank you

  Gene

• Recently, I'm subscribed to Acrobat XI after the test expired, but when I went to turn it on I was asked for the serial number. I don't have the order number on the invoice. How can I get the serial number for the trial software that is on my computer?

  Recently, I'm subscribed to Acrobat XI after the test expired, but when I went to turn it on I was asked for the serial number. I don't have the order number on the invoice. How can I get the serial number for the trial software that is on my computer?

  Hi Kenneth,

  Subscription does not have any serial number. Please use your Adobe ID to update the licensed software.

  Kind regards

  Rave

• Color problems: the red color has disappeared from my computer

  Original title: color problems

  The red color has disappeared from my computer. The moniter is ok.

  Hello
   
  You did it changes on your machine before the problem?
   
  It could be a hardware failure.
   
  Things that can be loaded are listed below:
  
  broken monitor cable has...
  b. defective monitor.
  c. faulty graphics card.
   
  You can consider measurements:
   
  Step 1:
   
  Double check that monitor cable is firmly attached. Try the Wiggles, see if the color returns.
  Step 2:
  
  Test another monitor on the PC (Personal Computer), and/or the monitor on another PC.
  Step 3:
  
  You may have a bad cable, or the monitor may be defective.
   
  Step 4:
   
  Right-click on the desktop and select Properties. Go to the tab settings, and report on what choice was filed under 'Color quality' and what is the other choice in the drop-down list?
   
  If there is no choice of color quality better than what you have, you may not use the correct driver for your video card or monitor.
   
  Uninstall and reinstall the drivers for video card and see if the red color appears.
   
  Follow the steps in the link to uninstall and reinstall the video card drivers.
  http://www.Microsoft.com/windowsxp/using/Setup/support/driver.mspx
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• How to transfer to the new Photoshop Elements 10 from old computer laptop

  How to transfer to the new Photoshop Elements 10 from old computer laptop?

  You must be installed the same way you did on the old machine.

  If you save an instance of the license, then please disable during the uninstallation.

  Or if you have already used your case 'two' installation, then you must need to turn off the machine then of

  uninstall of so it will release the instance for a new installation.

• How to import bookmarks Firefox to a hard drive in another PC Firefox browser? The hard drive containing the bookmark has been deleted from a computer whose mother is dead, but the hard drive can be recognized outside on the new computer.

  How to import bookmarks Firefox to a hard drive in another PC Firefox browser? The hard drive containing the bookmark has been deleted from a computer whose mother is dead, but the hard drive can be recognized outside on the new computer.

  See this support article:
  
  http://support.Mozilla.com/en-us/KB/recovering+important+data+from+an+old+profile

• Mixer volume for the speaker shows controls a device called a name is not not available and generates internet audio randome at startup.

  No visual source audio stream, does appear, that sounds like a TV to the scan mode.  I can turn off the audio controls, but it restarts everytime I turn on the computer.  I can't find anything at the start that I can identify as the culprit.  Also, it stops if I disconnect from the internet.  I have a FIOS internet DSL and a wireless router.  This just started happening a few days ago.  System Restore does not resolve it.

  Hi William,.

  1 do you have the new Windows updates recently?

  2. were there any changes (hardware or software) to the computer before the show?

  The problem can occur if the sound card drivers are not updated. It can also occur if there is malware present on the computer.

  Method 1: Update sound drivers and check if it helps.

  Update a hardware driver that is not working properly(Windows 7)

  Method 2: use the Microsoft Safety Scanner in full scan mode and to remove all the threats that is not detected by it and see if the problem persists.

  Microsoft safety scanner

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.

  Please make a backup of all the data to an external hard drive before performing a scan because it might cause data loss.

  Note: do see you this device in the Device Manager, in the affirmative, then right-click on it and uninstall it and see if it works.

  Answer please if you have any questions.

• IPCC Express, option for the appellants out of the queue and leave a message.

  We are running 4.0 (5) IPCC Express improved. I need to configure our current ICD script so that when the appellants are held in the queue, they can press 0, out of the queue and leave a voice message. The ICD script we use is an exact copy of the script icd.aef by default on the system, it has just been copied and renamed. My question is, what are the steps I need to use the script to enable this feature?

  Two options. Option 1: Use the IPCC completely to save messages and manage messages as you seem to did so. Option 2: Transfer the caller to your voicemail number pilot and use your voice mail system to record the message.

  Steps to Option 1:

  1 early on in the script, use the step to read the Contact information call to capture the called number and save it as a variable.

  2. use the step to get a string to allow the caller to press 0 to leave a message. On the Filter tab, allow only the key 0 be hurry.

  3. in the leg successful step to get a string of digits, add the following steps.

  a. contact Dequeue step.

  b. reading quick step that contains a prompt that asks the caller to record a message after the tone.

  c. step recording, which records the message saved in a Variable of type "Invite".

  d. use the Terminate step to end communication with the appellant (you can add a quick step before that game if you want to tell the caller that the message has been saved).

  e. at this point, you can either use writing document step to record voice messages in a folder on the server of the IPCC, or you can use a series of other steps to place a call to the queue and play the message the following agent that meets, or you can attach it to an email and send it it make the address email of your choice (or a combination).

  I have this HUGE warning. I had several problems with what I've been able to overcome, but it requires a bit of diligence.

  -L' registration step requires a termination character (# or *). If the caller hangs just straight up, the script returns an exception and drop dead. You can manage the 'contactinactiveexception' using a step on the Exception and have it go to a label that you can put it as the first step under the leg successful registration step. In this way, if the user hangs up, the script handles the exception by going directly to the successful step. You can clear the exception just after that.

  -You will also want to handle this exception before Terminate step. If the caller hangs up and you try to put an end to this contact when he is no longer active, the script will always die, and the remaining steps will not run.

  We use the option to place a call in the queue. In itself, this requires a lot of thinking to make sure that the script is not die when an exception occurs. I ended up putting some exceptions in place where if there is a problem and that the recorded message never makes it to an agent, a log file is stored on the server as well as messages stored in a .wav file. Then, an email is sent to the contractor with these attachments also.

  Thus, it is as effective as make you it. Try to keep things simple at first, and then build on that to improve the experience of the appellants.

  Steps for Option 2:

  1. use the step to get a string to allow the caller to press 0 to leave a message. On the Filter tab, allow only the key 0 be hurry.

  2. in the leg successful step to get a string of digits, add the following steps.

  a. contact Dequeue step.

  b. call no redirection to the number voicemail pilot.

  I have not used this option, so I can't say with certainty how Callmanager will handle this call. The voicemail system will need to see the call as transmitted from a number that has a voice mail on the system account. If this does not work, you can use a dummy CTI Port with a fake extension that is configured to transfer to voicemail, then the voicemail box must be associated with the wrong extension. If you use Cisco Unity, you will also be able to use a routing rule to force the IPCC calls to a particular mailbox. Call the Viewer from the unity tools depot allows you to see the way in which the appeal is made to the unit.

  I hope that helps you and that it is not too verbose.

• Transfer photos and contact information for the razr of motorola (V3) to my computer using the usb connection

  I need instructions step by step to transfer my info and contacts, photo, and waiting for a cell phone motorola razr V3 I dropped and now the screen is white. I am on an acer inspire laptop which uses windows 7.

  I need instructions step by step to transfer my info and contacts, photo, and waiting for a cell phone motorola razr V3 I dropped and now the screen is white. I am on an acer inspire laptop which uses windows 7.

  Hi Trey

  If the phone is damaged, it is something you will need to contact the Motorola Support for the information you are looking for. Here is the link.  Motorola support
  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• How can I change the email account by default for the Windows parental control account?

  wrong address on behalf of Windows parental control

  My old e-mail address was cancelled through my former employer, and it is the email address I used for my email of security for the family.  Now that it is closed, I can't log in or make changes to my account for family safety.  How can I change the email address?

  Hello

  Please uninstall and reinstall parental controls on your computer. This will remove the information about your previous e-mail account that is on your computer.

  Please follow the steps described in this article on how to uninstall Windows Live Essentials:

  How to uninstall Windows Live Essentials

  After that, reinstall Windows Live Essentials. Please refer to this article for the download link:

  Windows Live Essentials 2011

  Thank you!

• VPN is not talk for the subnet behind a remote router

  Hi all

  I was hitting my head on the wall for a few days everything that is wrong with my configuration ASA...

  That's what I got:

  AnyConnect vpn (10.10.70.0/24)-online tunnel => ASA5505 performer v9.1.2 (10.10.20.1)-online (10.10.20.2) router (10.10.50.1) 1841-online my environment tour (10.10.50.0/24)

  VPN is allowed to authenticate, get an address, ping 10.10.20.0/24 but unable to pass traffic (ping, ftp, etc.) 10.10.50.0 network at all.

  Using EIGRP between ASA and 1841, tried static set time 'network' then 'redisturbute' and the ' redisturbute static route-map ", still no luck.

  Found several docs, tried, doesn't seem to help...

  https://supportforums.Cisco.com/thread/2206416

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00809d07de.shtml

  Help, please...

  Attach the configs for the ASA and router

  Thank you in advance!

  Keith S.

  Hi Keith,

  You are using IKEv1 or IKEV2.

  It comes to your configuration:

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF

  Crypto-map dynamic outside_dyn_map 20 set transform-set ESP-3DES-SHA ikev1

  Crypto-map dynamic outside_dyn_map 20 the value reverse-road

  test of dynamic-map 10 crypto-card, the value reverse-road

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  The dynamic map that is applied to the interface is SYSTEM_DEFAULT_CRYPTO_MAP which is an ikev2.

  But the question is not the one. Depending on your configuration, there is a runnning between the ASA and the router EIGRP and according to your router table routing does not know where is 10.10.70.0/24 subnet is. To inject the subnet pool VPN in the routing table that we need an arriere-route control that you configured on a card which is not in use. Try this:

  Crypto than dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 Road opposite value.

  And let me know if it helps.

  Thank you

  Jeet Kumar