I finally down loaded and installed service Pack 1 for vista is when he died

Downloaded SP1 after 2 visits to microsoft solve this centre, there was something like 6 attempts this month to download SP1.
Itconected to the down loaded and installed himself off the machine. It works and it starts upeither to launch repair (recommended) or normally.
repair can't fix.
Normally starts to load, then a back line? loading orders? begins to roll things like 1592/88609...dll, or.sys etc, until it freezes on
!! 0x0c01a001d! 9073/88609 (\Registry\Machine\COMPONENTS\DerivedData\...)

How can I make it work. Can I uninstall via the command-line... no restore point prior to download SP1

Hello

Perform the following methods and check if it helps.

Method 1:

Try to do a restore of the system of the Windows Recovery console using the Vista disc. Read the following article to do the same thing:What are the system recovery options in Windows Vista?

http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

Method 2:

You can try to access the Windows Recovery console prompt and see if you can manually remove Service Pack 1 on your computer. Here are the steps to remove Service Pack 1:

1. open a window to the Windows Recovery console command prompt.

2. run the following command, depending on the version of the Windows Vista service that you want to uninstall:

  • For Windows Vista Service Pack 1: C:\temp\Windows6.0-KB936330-X86.exe x:C:\temp

Note

This command assumes that the file Windows6. 0 - KB936330.exe is located in the C:\Temp folder

3. He must create a sandbox environment before you can continue to step 4. This allows you to manage safely an untrusted program. To create a sandbox, type md, sandbox.

4. to remove the Windows Vista service pack, type or copy and paste the following command, depending on the version of the Windows Vista service that you want to uninstall:

  • For Windows Vista Service Pack 1: start /w pkgmgr.exe /m:c:\temp\Windows6.0-KB936330-X86.cab /up s:sandbox

In this command, NNN is x 86, x 64, or IA-64.

If these steps successfully uninstall the service pack of Windows Vista, and this resolves the issue, you are finished.

Here is an article that will give you different methods on how to remove Service Pack 1:
http://support.Microsoft.com/kb/948537

Hope this information is useful.

Tags: Windows

Similar Questions

  • Error code 800F0811 when you try to install service pack 2 for vista

    Original title: error code 800F0811 when trying to install service pack 2 for vista tried booting in minimum mode and reset my compents windows update or where he worked?

    When try to install service pack 2 for vista tried clean boot and reset my windows update components or where he worked? This two things were proposed during this same error that happened to a customer trying to download sp1

    Hello

    Review the information in the site mentioned below that can help you work with the question:

    http://support.microsoft.com/kb/947366#resolution3.

  • Error code: 0x800F0826 - trying to install service pack 1 for vista

    Error code: 0x800F0826 - trying to install service pack 1 for vista

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • Error unknown 80070005 error message when tried to install service Pack 2 for vista that someone know what it is

    I tried to install service Pack 2 for vista on toshiba laptop each attempt I get error message80070005 (unknown error) is not on the list of errors does anyone know what this message, or how to correct the problem.

    Hi Cassandra,

    Check if the following might help.

    Updated Windows error 0x80070005 - need a fix? Click here

    See also:

    How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  • Need to install Service pack 3 for Vista to download my Zune player

    Just need to install Service pack 3 for Vista to complete my download to my Zune Player...

    Thank you

    LEA Shauna Toenniges

    http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

    As you can see not SP3 for Vista.

    As you can see, the Zune Player requires XP with SP3 not Vista with Service Pack 3.

    Requirements for the Zune Player-

    http://www.Zune.NET/EN-AU/products/LearningCenter/zunesoftware/gettingstarted/pcreqs.htm

    Microsoft Windows 7 (all editions), Windows Vista (all editions), Windows XP with Service Pack 3 (home, professional, Tablet PC, or Media Center Edition 2005 with Rollup Update 2) or Mac OS X with Boot Camp running Windows 7 or Windows Vista.

    If you use a Windows 7 64-bit edition or Windows Vista, please click here to download the Zune software.

    Software Zune will not work on versions of Windows prior to Windows XP SP3, all the versions of 64-bit of Windows XP or any version of Windows Server.

    Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

  • WindowsUpdate_80246007 - cannot install Service Pack 2 for Vista. Can someone help me with this error message? What di I do to solve it?

    WindowsUpdate_80246007 - cannot install Service Pack 2 for Vista. Can someone help me with this error message? What di I do to solve it?

    WindowsUpdate_80246007 - cannot install Service Pack 2 for Vista. Can someone help me with this error message? What di I do to solve it?

    2 forums: you can go:

    1 Windows Vista IT Pro forum, section of Windows Vista service packs:
    Section of Windows Vista service packs:

    http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

    2. Windows Update section:
    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • Install service pack 2 for Vista

    Looks like I need to install service pack 2 - it makes me really nervous--I'd be nervous?

    How long does it take? Should I wait no problem?

    Appreciate any help...

    stro727

    http://support.Microsoft.com/kb/948465/en-us

    Information about Service Pack 2 for Windows Vista and Windows Server 2008

    Link above has the info re SP2.

    It's updated operating system Vista, upgraded installation and activate Forum.

    You will get the best help for any problem of Update/Service Pack / questions in the Forum updated Windows; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    See you soon.

    Mick Murphy - Microsoft partner

  • Cannot install service pack 1 for Vista

    For almost 2 years, I try to install service pack 1. When installing to part 3 of 3 back changes and is not installed. I called the Vista support almost 10 times, they also helped me online. I've tried everything.
    What can I do?

    How to fix the Windows Vista and Windows Server 2008 service pack installation issues:
    http://support.Microsoft.com/kb/947366

    What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you tried to install SP1?

    A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Problems to install Service Pack 1 for Vista

    Hello

    I'm running my computer on Vista Home Premium 32 bit only.

    I'll just say everything that happened to that meets anyone knows exactly what is happening. Recently, I received a few DVDs of the trial version of Adobe, who quickly, I tried to install. The installer says I need Windows XP Service Pack 3 or Vista Service Pack 1. I found this curious because I thought that I had installed SP1 long ago when it appeared on Windows Live Update. After checking, I discovered that I had not installed for some reason any. I watched in Live Update for download, but it wasn't there, so I came on the Microsoft site and downloaded the stand-alone version of the service pack. I have closed all the programs that I had running and run Setup. He got to halfway through the installation bar (first?) and has stalled for a while, then extended to the end of the bar and displays an error, which contained a link to this page: http://support.microsoft.com/default.aspx/kb/947366. I followed the steps in resolution 2 and downloaded system update readiness tool. I ran the installer, but it seemed just to stall for a long time, so I canceled and he run. This time I got an error before he began to install (Code: 0 x 80240009). I looked for a solution and came across this http://support.microsoft.com/kb/929833, with some people claiming it fixed.
    I followed the steps and restarted my computer and it is no longer displayed the error, but it just keeps stalling at the installation screen. I decided to see if I could find an alternative
    solution to the original problem with the Service Pack and came across someone who says that McAffee was responsible, which is the virus scanner, that I installed it on my computer. I disabled
    pretty well all of the program, as well as my firewall and restarted the computer again. I ran the installation but got the same error. I have reactivated my firewall and McAffee and now I'm
    at a loss on what to do next.
    To sum up; I can't install SP1 or system analysis tool and I need to.
    If you need more information, let me know.
    Thanks in advance

    Hello, Ember09

    This seems to be an invalid data error code, Service Pack 1 installer was corrupted when you downloaded it, try to download it once more and check if you get the error again.

    Download the stand-alone update: x 64 | x 86

    We can't wait to hear back on your part.

    David
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Used to install Service Pack 1 for Vista

    I get to the point if I download the sp1, it starts the installation. It goes all the way up to step 3, and then he tells me after a very long time that service Pack 1 installs recovery of changes. Wondering what to do.

    I thought about it myself. I have McAfee and read somewhere that the update will not take if you have mcafee. So he says to disable anti-virus, firewall and software spies. I have done that and restarted my computer. With disabled McAfee, I was able to install the Service pack. Then I re active my McAfee and everything is fixed. Thanks for your help.

  • How can I install service pack 2 for Vista, while on battery.

    My computer is running on battery power, even if it is plugged.  My battery is not, but it's OK since I use as a desktop replacement system, and it works fine.  Unfortunately, the update of Windows Vista Service Pack 2 will not install.  How to ignore the condition to be plugged, or tell my stupid computer it is plugged and won't run out of juice during installation?

    [It seems to me that you will have to replace the battery before installing SP2. YMMV]

    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • 8024200d error code when you try to download/install Service Pack 1 for Vista Ultimate.

    Have you tried several 'solutions '. Anyone would be able to give me a direct answer?

    Error 0x8024200D code is:
    SUS_E_UH_NEEDANOTHERDOWNLOAD
    The Setup program requires more data to download

    Suggest manually download you the complete file (for single PCs too) and install the same-

    How to obtain the latest Windows Vista service pack
    http://support.Microsoft.com/kb/935791/
    Method 3: Get the latest Windows Vista service pack from Microsoft Download Center


    FYI
    learn how to install Windows Vista Service Pack 1 (SP1)
    http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

    Learn how to install Windows Vista Service Pack 2 (SP2)
    http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

  • Should I install Service Pack 2 for Vista

    Ok

    I active Genuine Microsoft Windows Vista Home Premium SP1, day without Internet Explorer 8. Windows Update is says service pack 2. Can I download and install it? Some say, it crashed to their system.

    Windows Vista Home Premium 32-bit SP1, Dell Dimension 8400, 3 GB, 80 GB drive HARD, Intel Pentium 4 3.20 GHZ

    Hi pmt765,

    Thank you for visiting the Microsoft Vista answers forum.

    You should be sure to download SP2. There has been some problems reported here, but the vast majority of people is able to download the service pack without any problems.

    Go to this Microsoft link for more information:

    http://support.Microsoft.com/xpsp2getinstall Dave D
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I get error code 80042306 when you try to install Service Pack 1 for Vista Business

    Am linking to get my eccentric Vista to work properly. Try to get the notice of failure load and obtaining of the SP.

    alabamacoasty,

    In addition to the information requested, try these troubleshooting of beginning steps and let us know the results from them.

    System File Checker

    The system update tool

    Clean boot your PC, and then run Windows Update.

    Reset the Windows Update components

    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Cannot install Service Pack 2 for Vista.

    It stops at c:\windows\system32\mmcex.dll. Why anyone?

    It stops at c:\windows\system32\mmcex.dll. Why anyone?

    Suggest that ask you this question to Windows Vista IT Pro forums, section of Windows Vista service packs:

    http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

Maybe you are looking for

  • What is the latest version of FF 34.0.5?

    In my view, there is a version of FF 34.0.5 available, but when I check the update function, he said I have the current version 34.0 which is correct?

  • Problems with the network driver

    Hello. I came here because I didn't know how to fix my netbook... The model is: Hp Mini 110-4100. I wanted to format it because it was full of viruses and other unnecessary things. It came with Windows Starter, so I installed Windows Home Premium fro

  • HP Client Security Manager 8.3.1.1714

    Requested HP to update for HP customer Security Manager 8.3, the program has been installed. Since then, there no password more in the password manager. And the Password Manager icon only shows more in internet explore. I mainly work with IDS of fing

  • queue

    HelloMy name is Noy and I am a student in my final year and working on my final project.In the project, I have get a camera images, put them in a queue in a loop and another loop I want to get the images out of the queue and save it as an avi file.Wh

  • How do I uninstall or remove a downloaded file. (file to download FlashPlayer). ?

    How to remove or uninstall a flash player download. downloaded, it has not completed installation?