I find it difficult to open certain files when you first launch; It takes four or five attempts until they finally open

Original title: slow to open files

I find it difficult to open certain files when you first launch; It takes four or five attempts until they finally open

Hello

-Did you change on your computer due to which the question has begun?

Follow these steps and check if they help.

Step 1:

Test the issue in safe mode.

Step 2:

If the problem does not persist in safe mode, you can start your computer in a clean boot State.

Note: Follow the steps in the article to restart your computer as usual.

Tags: Windows

Similar Questions

  • I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.

    I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.

    I do: when I am uncomfortable with the laptop I save the files on the laptop, then on my external hard drive. Then, when I'm at work, I opened the drive, but the Muse says every time, that so many links in the 'active' is missing. And it takes a lot of time to get all the missing link. Like today I had to open a file of Muse from the external hard drive, and there are about 100 links that are missing.

    How can I solve this problem

    the best thing if you are a user of creative cloud is to store the files in a folder in your account of cloud instead of transferring the files from one computer to another.

    If you are not a Subscriber cc then Dropbox or iCloud will work as well.

  • Delay of the dialog 'Copy the file' when you drag a file to a folder that already contains.

    Delay of the dialog 'Copy the file' when you drag a file to a folder that already contains.  The dialog box only appears when that I disconnect.  In fact this problem can seriously mislead the user. The file has been copied to or not? This is a serious shortcoming of the operating system.
    A similarly delayed dialog box is to join files on a send to the recipient of the message.

    What is the cause of the delay? Dialog boxes are not under other windows - they break on screen as I log out.

    When I drag AGAIN the same file in the same folder, then I get a message that "the action cannot be completed because the file is open in another program.  (No doubt the program who was trying to copy in the first attempt and waits for a response to the dialog box may not show me!)

    Hardware: Computer laptop Asus M70.  VISTA Ultimate with the latest patches.

    Lorien, thanks for your response.
    A lot of time and effort was exercised in an attempt to find out WHY. I wanted to not just fix the symptoms. It concerned me greatly as a basic function of the operating system does not work. He was not fit for purpose. In the end I found that a third-party application compromised of WINDOWS VISTA 32-bit operating system. If an operating system can not reliably inform the user that an operation is successful or not, it is worthless. In the case above, I didn't move the files was a success (no response required) or the delayed response until I signed.

    In addition to the original problem, there was the following problem: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/thread/24068518-31e0-4b23-823b-d54882792301 where "send to..." 'Recipient' disable the context menu in Explorer for JPG does not or not broken.

    Finally, I figured out the following error had something to do with my problems:

    Description:
    The server {AB8902B4-09CA-4BB6-B78D-A8F59079A8D5} is not registered with DCOM within the required time.

    -
    -
     
     10010
     0
     2
     0
     0
     0 x 80000000000000
     
     198817
     
     
     System
     ASUS_M70VM
     
     

    -
     {AB8902B4-09CA-4BB6-B78D-A8F59079A8D5}
     

     

    Arriving in my solution, I was inspired by the following articles http://blogs.technet.com/markrussinovich/archive/2006/08/31/453100.aspx     http://blogs.technet.com/markrussinovich/archive/2006/11/27/532465.aspx
    So I downloaded the MS debug tools and confirmed my suspicion of dllhost.dll using REGEDIT to set debugging on that.
    To cut a long story short, it's DivX 7.2 which caused me grief.  In particular, the file DivXDecH264.ax 'has an access violation - code C0000005 (first chance).  It has been autonomous in DivX Plus DirectShow Filters.     Thus, when it has been deleted (starting other Articles to original install DivX) through Control Panel of configuration/programs and features my system worked perfectly well.

    I know SFA on the architecture of Windows but why was this DivX file loading and cause an access violation whenever I used the windows Explorer?  How an operating system may fail in a basic function of by a third party issue?  There are some newspaper where this access violation was recorded?  It was only possible to identify it in debugging?

    What you fella?

  • Possible to force overwriting of files when you use the method. render()?

    Hello world

    Hope all are well.  I looked at the documentation available in the Guide scripts of the effects after, but could not find any information on this.  Is it possible to force overwriting of files when you call a rendering method. render() in a script?  I know there is a constant that can be used to force overwriting of .aep project files when you use the method. close() on the app object.  For example, it's documentation:

    Action to run on close. A CloseOptions enumerated value, one of:

    CloseOptions.DO_NOT_SAVE_CHANGES : Close without saving the changes. CloseOptions.PROMPT_TO_SAVE_CHANGES : Whether to save changes before closing.
    CloseOptions.SAVE_CHANGES : automatically record on the end.

    Is there something like this for managing conflicts of files during the rendering process?

    Thank you
    Arie

    That's what I do. It seems to work:

    app.beginSuppressDialogs ();

    myProject.renderQueue.render ();

    app.endSuppressDialogs (false);

    Dan

  • I found no function 'Receive a file' when you click on Bluetooth icon bar tasks

    Good day everyone,
    I use Windows 8 64 bit on Asus N56VZ-S4324H language
    I have not found the function 'Receive a file' when you click on Bluetooth icon bar tasks,

    So I don't know how to transfer my files from my phone to my laptop.
    I'm trying to fix the error of re - install the Bluetooth driver, but not solve this problem.
    Please help me!

    It's my screen image:
    Thank you all for your help!

    I fixed my problem on bluetooth transfer.


    When I waited longer that normal, I see windows pop up appears on the taskbar.
    Now I transferred files through bluetooth.
    Thank you once again!

    MenPro Admin
  • How to remove CC2015 was last updated. This update removes some application COGILOG files when you restart your Mac.

    How to remove CC2015 was last updated?

    This update removes some application COGILOG files when you restart your Mac.

    Please refer to this blog post to see if it applies to your situation:

    http://blogs.Adobe.com/adobecare/2016/02/12/creative-cloud-desktop-on-Mac-update-issue/

  • ADF: How to get the path of the file when you use component InputFile

    Hi all

    I use jdeveloper 11.1.1.5.0 version.

    in my case, I created program Mail Client mail where I used the ADF InputFile component for attach file mail.

    but problem is this return path only component InputFile from the file (only the filename get)

    and in my mailer class DataSource uses the full path name of file access.

    UploadedFile uploadfile=(UploadedFile) actionEvent.getNewValue();
         String fname= uploadfile.getFilename();//this line only get file name.
    

    so, how can I get the full path using adf InputFile component or any other way to respond to my request.

    Thank you

    Manish

    Try this (I did not, so I can't promise it will work):

    MimeBodyPart messageBodyPart = new MimeBodyPart(uploadFile.getInputStream());
    messageBodyPart .setFileName(uploadFile.getFilename());
    messageBodyPart.setContent(multipart);
    

    It does use the inputStream from the downloaded file as the content of the file attached. You shouldn't need a full path, since you're not going to use a file object to provide the content.  And it shouldn't be necessary to define the DataHandler.

    But if that doesn't work, I go back to my first answer.  Use uploadFile.getInputStream () to get the inputStream from the downloaded file, create an outputStream to write the file to the file system of the application server.  Then you have a file with a known path that you can subscribe to the DataHandler.  You can delete the file when you're done with him.

  • Error message having to do with VSS/open files when you perform backups remotely

    When you back up by using services of Mozy for the last 2 weeks that some files could not be backed up.    Mozy did a few checks and they said it had to do with some files remain open.  They said it had to do with the Vss/open files, is there anyone out there who might be able to help?

    Hello
    • What version of Windows XP you are using?
    • What is you receive the exact error message?
    You can view these methods:
    Method 1:
    I suggest you try Windows back up and check.
    Here is the link:
     
    Method 2:
    You can also see the question in the boot.
    You need to perform a clean boot to find the program that is causing and then disable or remove.
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353/en-us
    Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.
  • Difference in the gateway.properties file when you access of PIA and the opening of the PSIGW folder in the domain of the web server

    Hello

    When I open the file gateway.properties by ITTO's domain\application\peoplesoft\psigw web server directory, I see certain values that are not the same, when I open the file gateway.properties of PIA by navigating to Peopletools-> Integration Broker - > gateway configuration-> gateway.properties file. I tried to clear the web server cache, restart the web server. Even then, I see quite different values of these two places. If I do any change in one of the two places, his not reflecting only with access to another place.

    Could someone delete the following point?

    -I think there is only a file gateway.properties under the web server's domain. When access us the PIA file, wherever to be included in?

    -Is the file stored somewhere in the database as well? where it recovers when PIA accesed?

    -The two are always in sync from different modes?

    -How to synchronize these two?

    Thank you

    Dinkar

    There is only one file per domain. It is read by a web service call when you view it in the PIA. This allows you to edit files from another server. The only time they will be different, that is if the URL of your entry point to a server other than the local server.

    If the URL of your entry points to the same server as your local file, then the only advantage to use the PIA to modify the file (except easy access), it is that sometimes it will update the properties in memory. Change the file in the file system requires to restart the web server for the properties to reload in memory.

  • How to get a glimpse of a PSD file when you click file > open

    My previous topic was not accurate enough.

    In PS CS5 when you click file > open and click a file PSD top see a thumbnail preview. I can't find how to do this in CC because it uses the windows file open and the PS one.

    Does this apply?

    http://feedback.Photoshop.com/photoshop_family/topics/no_psd_image_preview_in_photoshop_on _open_dialog_box_in_windows

  • -Pop-up menu (allows you to choose what program you use to open the file) when you insert sim or cd does not appear

    When a disk or sim card or data storage device is connected to the computer there should be a menu pop up that allows you to choose which program to use to open the file. This is no longer the case. Any ideas how to restore it?

    Hi John,.

    1 are you referring to AutoPlay settings in Windows XP?

    2. did you of recent changes on the system?

    If you are referring to AutoPlay settings in Windows XP, you can see the following article in Windows XP to enable the feature.

    The Autorun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

    You can also consult the following article:

    How to change or choose the program that starts when you double-click a file in Windows XP

  • Bridge will not open the NEF files, when you double-click on them, using PS CC

    I installed the latest version of PS CC and the bridge, but when I go to my Nikon NEF files and double-click it to open, they open in some weird Photo Gallery of the window, then I went Bridge preferences and reset settings, and now when you double click it nothing happens and they open at all.  I use a PC with Windows 7.

    I posted this question before, I need help, please

    If you go into Bridge preferences > File Type Associations, it does the default list?

    If it does not list Adobe Photoshop CC you can use the Browse button to

    the Photoshop.exe in C:\Program Files\Adobe\Adobe Photoshop CC

  • Properties tab shows 3609 files, when you select all the files it only shows the files in 1974?

    When I right click and select Properties tab it shows 3609 files, when selecting all the files to copy shows only the files of 1974?

    Hello Tony,.

    If it is certainly a big difference, I think that for most all of this is taken up by folders and subfolders which are mainly empty place holders. Have you looked at the folder with Windows Explorer? A freeware application that can help is WizTree, it provides both a performance graphics and text of what's on your hard drive (or part of it). Can be very educational. Download here: http://antibody-software.com/web/software/software/wiztree-finds-the-files-and-folders-using-the-most-disk-space-on-your-hard-drive/ .

    Let me know if this helps you.

    Kind regards

    BearPup

  • How to rename a file when you move it

    How to rename a file when he tries to move it to another directory and it already exists?
    I thought I could use a match pattern on the paths of the source and destination, because after a certain point, the path would be the same, and then with another model of correspondence I extract only the name and use a path of construction.
    I don't know if it would actually work. Can anyone give me any suggestions?
    Thanks in advance!


  • lost folder and files when you attempt to attach to the e-mail message in outlook-web

    My chosen file is sitting at the library/documents, but when I try to attach a file to this folder in my outlook web email, the entire folder is missing - from one moment to the other! all other outlook emails allow to locate, open, and attach this file. For fixing the web-outlook of this folder, I have to save the file to a USB key, then plug. Ideas he disappeared or how do I get it back?

    It is probably a permissions problem.  Web sites are not allowed to access your personal files.  You can probably get around this by adding web outlook to your list of trusted sites, you can make Internet Explorer options.  Trusted sites get more access to your computer.

Maybe you are looking for