I found a 5G iPod today. I have restored on WiFi, but to activate it needs the owner previous email Apple ID and password to activate. I have no idea who is the former owner. Is it possible to activate it without the Apple ID?
I found a 5G iPod today. I've restored on WiFi, but to activate it, I need the owner previous email Apple ID and password. I have no idea who is the former owner. Is it possible to activate it without the Apple ID?
No.; locking activation is a measure of protection against the vol. bring it to your local police station or to post notices autour where you found it.
(140507)
Tags: iPod
Similar Questions
-
I have a distribution list large email I want to create, BUT I don't necessarily want to put in my Contacts and all this My Contact list of people synchronized upward with my iPhone. Can I create a group without their input in my Contacts?
You can create another account on your mac.
You can open an account with mailchimp.
There may be a limit on the number of emails you can send per day. No idea about the number, but I've heard as low as 200 per day.
R
-
Hello! I have a problem with my card express 11 b/g/n wireless lan mini pci because I can't connect to internet via wifi but I can connect to the internet via cable. whenever I try to connect it repeat to myself that there is a problem with your wireless network card. I tried troubleshooting, uninstall and reinstall the program, but always the same result. I'm updating too but still the same thing. I use a windows 7 Professional on my Lenovo 412. can someone help me? Thank you!
Hello
Method 1: I suggest you to follow the instructions of the link to solve the problem of network card:
How can I troubleshoot network card?
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems
Method 2: Troubleshoot wired and wireless in Windows network connection problems
You can also post your question in the forum of Lenovo to get help:
-
Satellite A60 - connected to the WIFI but can't get on the WEB
Hello
I have a really strange problem with my Satellite A60. I have a US robotics wireless router. I can connect with my laptop, in the sense where it says that it acquires an IP address and then he said: it is connected, but then it is not possible to browse the web or access to the router. Let me also point out that:
-The internet connection works fine if I connect the laptop to the router via a cable (for example, I can access the router)
-J' have a second computer that is connected via WIFI to router and it sees no problem (it goes up an adapter for US Robotics)
-WEP encryption is active, but I'm sure that the key is correct. I also try to disable but did not help
-MAC address filtering is enabled, but the laptop WIFI card is in the list. I also tried to disable content filtering, but it did not help
-J' also tried to remove the encryption and MAC address filtering, but it did not help
-In past I could connect to other networks WLAN with my laptopI hope that I have provided sufficient detail so that someone can try to help me.
Thank you in advance!Hello!
I think that the integrated firewall router and dhcp server integrated are the first things to check. May be there are separate configuration for Ethernet and WIFI connections options. Check if your wireless connection is "default gateway" address when the computer shows that it is connected to WIFI. If no default gateway address is then most likely it's dhcp or confiuration problem your router firewall.
-
I have an error 1706 - no valid source could be found for product tray/o: I have no idea
This error 1706 appears after windows starts and remains on the desktop. I just installed a HP 8500 printer and thought it was something to do with it. When I put in the disc, it says bad disc. If someone has had this problem and it is resolved, please let me know.
I have windows vista sp2
Sandi
This error 1706 appears after windows starts and remains on the desktop. I just installed a HP 8500 printer and thought it was something to do with it. When I put in the disc, it says bad disc. If someone has had this problem and it is resolved, please let me know.
I have windows vista sp2
Sandi
Hey sandirose
I think you will find that it is to do with the hp printer
http://h30434.www3.HP.com/T5/printer-all-in-one-software-and/missing-trayapp-and-CD/TD-p/55992
Contact hp support or try their forums
Walter, the time zone traveller
-
Mac OSx 10.8.2
Firefox 18.0
Firefox-> Prefrences-> advanced-> encryption-> Certificates-> import
Select the cert, enter the password, and then I get this message: successfully restored your security certificates and the private key.
However the cert does not appear on my list of certs, and I can't access the site requiring this cert.CERT has worked in 17 combined with OS 10.7.X worm
CERT works on my win box 7 with firefox 17.0.1Try renaming the file cert8.db in the Firefox profile folder in cert8.db.old or remove the cert8.db file to remove the intermediate certificates that Firefox has stored.
If it helped to solve the problem, then you can delete the renamed file cert8.db.old.
Otherwise you can rename (or copy) the file cert8.db.old to cert8.db to restore previous intermediary certificates.
Firefox automatically records the intermediate certificates when you visit Web sites that send such a certificate.If that didn't help then remove or rename secmod.db (secmod.db.old) as well.
-
Hello! I need help please. I recently got my computer "cleaned up" after an attack of virus and obviously lost all my software in the process. I bought Ps CS5 a couple of years ago, but I don't really know if I still have the kit with the serial number on this subject. Is there a way I can always reinstall my adobe email/user name and password? or other alternatives?
Thank you
You can download the software through the page linked below. You will need your serial number to make it work. If you have registered the software when you installed it first, then your serial number should be available through your Adobe account online.
CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html
-
I was hoping to use Illustrator today, so I bought it. But I'm stuck at the stage of download with a dialog box saying that I have to choose an application to open this type of link (it mentions .aam)
Sewn,
If you use creative cloud, first install the Adobe Creative Cloud Desktop application:
Download Adobe Creative apps for the Cloud
and then use the Adobe Creative Cloud Desktop application to install applications:
Using creative cloud | Download, install, update or uninstall applications
If you purchased creative suite software, check out these links:
Suites and programs CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 , CS4 Web Standard | CS3
Each page contains a link like this to help with the instructions:
If this method doesn't work well for you, you can download directly from this site:
CS 3, 4, 5, 6:
http://prodesigntools.com/Adobe-CS6-direct-download-links.html
http://prodesigntools.com/Adobe-CS5-5-direct-download-links.html
http://prodesigntools.com/all-Adobe-CS5-direct-download-links.html
http://prodesigntools.com/download-Adobe-CS4-and-CS3-free-trials-here.html
Guinot
-
None of my restore points will not work. He directed the restoration of the system and that it recharges, but says system has not been restored.
What is your system brand and model?
What is your Version of XP and the Service Pack?Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)? System Restore is not a time machine, but of course, this should work if you think you need.Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.For example, if you use Norton/Symantec products, you will see a message like this:Restoration incomplete. Your computer cannot be restored...It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore. Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore. It works for some configurations.System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore. This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore. You don't have to reinstall XP, only the part of system restore.That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).Give these ideas some consideration if they apply to you.Sometimes malicious will afflict your system restore to prevent you to find and remove malware. It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.No matter what you use for protection against malware, I do so and then only begin to solve any problems:Download, install, update and do a full scan with these free malware detection programs can solve any problems:Malwarebytes (MMFA): http://malwarebytes.org/SUPERAntiSpyware: (SAS): http://www.superantispyware.com/It can be uninstalled later if you wish.The scans by operating clean, reboot, test and we can fix any other issues
-
Is it possible to create a standard form which can be sent by email to anyone and once filled by the receiver, have a button that clicks on the receiver and the form is encrypted and attached to an e-mail to the sender and a built-in admin password it open?
Hello Graphicsguy123,
You can get the workflow above using the Widget feature. Here is the link for reference:
https://helpx.Adobe.com/document-cloud/help/create-widgets.html -Usman
-
Found an ipod touch, 5 gen, MOSS oak case of Survivor, perhaps lost to the East of Dallas, TX, serial No.: CC * MJF
< personal information under the direction of the host >
You might hope that the owner might be able to locate the iPod Touch, if it
Unit is able to access and use internet FindMyMac/iPhone.
You can report the device that you have found to the local police; don't know if they
could help or would help to unify the product with the owner. Some info on
How managing an iDevice found may be contained in support topics, like:
• If your iPhone, iPad or iPod touch is lost or stolen - Apple Support
The topics generally appear in a search:
https://DuckDuckGo.com/?q=How + to + report + iPod found ++ & t = ffsb
Generally most lost objects are reported to local police, since
Apple itself doesn't seem to have no way to contact the owners of a
directly lost product. -These CSA discussions are for the most part, users
like you, who are volunteering to help others; without compensation...
We have therefore no channel special contact Apple on a product lost.
Serial numbers and identification of a product will not be
the topic thread and will be deleted. as a support policy.
Sorry that I am of no use to help you return the iPod touch 5
for the owner. He or she may be able to find it, if they enable the features in
the device and in any other Apple device to follow.
"Find my iPhone is the only way that you can follow or locate a lost device or missing.
If find my iPhone is not activated on your device until missing, there is no other
Service from Apple that can find, follow or flag, otherwise your device for you. »
In any case... good luck!
-
Hello
I have a sport IWatch found that domestic activity (usually running on treadmill) there is a huge different iWatch see the short distance (approximately 23%) then the treadmill Distance (I used several treadmills). Calibrate the iwatch outside.
no possibility to calibrate domestic? or solution of New York.
Thank you
Avner
Hi Avner
Currently, there is no way to calibrate Apple Watch on a treadmill.
Calibration teaches your watch how your arm movements relate to your length of stride at different speeds when walking you and/or running. It does this by comparing the accelerometer data with GPS (location services) data from your iPhone. To optimize the performance of the application of the workout, when using the treadmill, allow your arms swinging naturally.
It can help restore your calibration data and start over:
On your iPhone, in the application of the watch, go to: My Watch (tab) > privacy > Motion & Fitness > tap reset Calibration data.
To calibrate again, follow the instructions in the article to support below, including:
- Records open-air market training and/or run in the open air with the application of the workout on your watch.
- This for 20 minutes at each speed to during which normally walk you or run.
- While doing so, take your iPhone with you, with location on Services.
- Allow your arms swinging naturally during training.
Estimates of activity also dependent on your personal information. To verify that it was entered correctly and update over time:
-On your iPhone, in the application of Eve, go to: Watch My > health > edit (top-right).
More information:
Calibrate your Apple Watch for better accuracy of training and activity - Apple Support
-
Original title: outlook.
The host 'smtp' could not be found. Please check that you have entered the server name correctly.
'Job', account: 'pop3', server: 'smtp', Protocol: SMTP, Port: 25, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0D now that I signed up with outlook.com, I wish I had the other implemented to send emails, and anything else I might need to do. Is this possible without too much difficulty?If you use a POP3 account, you need an email like Windows Live Mail client to do. Outlook.com is Webmail.Help for Outlook.com is located in this forum
http://answers.Microsoft.com/en-us/windowslive/Forum/mail?tab=allWindows Live Mail help is in this forum
http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail?tab=all -
I created playlists on my iPod that I have to do the same thing on my laptop.
I created a playlist on my iPod that I have to do the same thing on my laptop for synchronization purposes?
If you synchronize your device with iTunes and playlists that make you on the device must copy in your library of iTunes the next time you synchronize.
TT2
-
I tried to register with support, but:
"Your email address could not be validated; Make sure your email is correct and click on register below. »
Action: I did.
Answer: The same. How the H box you confirm if this was not possible.This has happened
Don't know how many times
is now
Sign up here and you should be sent a link to the email you provided. If you have not provided an email address valid or an email that has not been used to create a.
Maybe you are looking for
-
Hello people with the fact that I have a mac mini 2010 which im happy... I wanted to make a new complete installation or reset so it runs like new... is there an article on this forum on how to do this... Basically, I want to factory reset and instal
-
How can I move my icons of the application to another page? Want to group them.
I have iPhone 5 and too many icons on the current pages. I would like to create more pages so that I can combine them. I moved 2 icons to a new page, but for some reason any cannot drag a plus more. Any suggestions will be appreciated.
-
my bluetooth adapter cannot connect to PAN networs
I tried everything, piece of hardware is OK (checked on different PC), my feeling is that there is something in the settings of Windows that blocks this connetion. Bluetooth adapter is detected correctly by Windows does not work properly. BTW, this i
-
S10e WebCam: device not connected
Hello Today, I bought a new lenovo s10e. Everything works fine but integrated webcam. My Windows XP Home Edition doesn't even know that there is such a device - is not listed in Device Manager. So I can't install any drivers and when I press Fn + Esc
-
How select (focus) button bydefault.
Hello Please tell me how select (focus) button bydefault.