I found the guide until I downloaded I want to ask the community

called webloc translator program grannies know want to know if it is safe and if that's what he says, he does until I downloaded because I have a lot of webloc files that I need and open, they were created on Mac and I am moving them to a Windows PC a Windows 7 PC

Please note, application on the Mac installers are typically in .pkg format which is not compatible with Windows.

Tags: Windows

Similar Questions

  • My computer has been destroyed and I have to re - install all my software.  I found my Adobe Acrobat order with serial number, but I have not found a way to re - download the product.

    I need to re - install Adobe Acrobat X or XI (I do not remember that I am brush up of ashes).  I bought a laptop another Sager... extremely good by the way, came out to the orders and the serial numbers for my order and got the serial number, number and (even though I found the cover later in all the undesirable), but I have not found a way to download the product again.

    How can I get the url of re - download product Adobe X, plug my serial number and reactivate the product.  My phone number is the same as when I bought the product, as is my email address, if this isn't a con man who has grabbed my box and fled with her.

    It is the most important issue, and I added only the following at the bottom for people considering the upgrade to Windows 10 RAID arrays.

    Please let me know as soon as POSSIBLE.

    BTW, I'll have to send my phone to SAGER, because I wanted it it configured in RAID 1 and all drivers are now included in Windows 10 and if not, they have a large database they find the driver for any device the problem is with, except the driver for the disks RAID 1 array.  I called MS and I said I was on the phone to Intel who did the MOBO with the hardware RAID and tthat MS Windows 10 kept crashing whenever we tried to load drivers RAID 1.  It is a known issue for Intel.  Microsoft just laughing about it.  Has anyone experience this problem at the moment?

    Post edited by: John Regus

    Acrobat X and XI downloads are available here, but you need to know is you have a license for, like your s/n will not work with the wrong version: download Pro or Standard versions of Acrobat DC, XI or X

  • I don't see the guides until I click.

    I don't see the guides until I click. On all other adobe products, you can see the guide when you drag. That's how it is used to be the case in Acrobat. Is there a way to turn this feature back on? I use a mac and adobe domain controller.

    This is a bug, and as far as I know, there is nothing, Mac users, can we do to get our rear guides while moving up to what Adobe corrects this problem.

  • I buy Photoshop element 14, found the serial number and click Download. Brings back me to the previous page. How can I download.

    I bought Photoshop element 14, connected and entered the redemption code and got the serial number.  Clicked on the download link, and it takes me right to the previous screen.  Tried another browser and then had not found page.  Tried to download some place and it took more than an hour, so I canceled.  How can I download what I paid?

    Have you tried to download link below?

    Download Photoshop Elements | 10, 12, 14, 11, 13

  • I have Acrobat pro on an old pc with windows 7 and now I want to download it on a new pc with windows 8. I found the serial number, but I don't know how to download.

    I have Acrobat pro on an old pc with windows 7 and now I want to download it on a new pc with windows 8. I found the serial number, but I don't know how to download.

    Available downloadable Setup files:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • I bought Adobe Acrobat 9 year 2009. Due to new hardware, I have once again to installthe programm. 1 or 2 two years the hotline told me that I have a free download. Now, I tried and I found the product described in my personal

    I bought Adobe Acrobat 9 year 2009. Due to new hardware, I have once again to installthe programm. 1 or 2 two years the hotline told me that I have a free download. Now, I tried and I found the product described in my personal account, but it is not possible to download. Then I tried to download that version 9 through the community, but then my product key has not been accepted.  Thanks for any help in advance, Andreas

    Available downloadable Setup files:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • ENVY 750-197c: cannot download drivers Win 10? "We have found the drivers for your product...". »

    I just installed Win 10 (64-bit) on my desktop and I want to install/update the drivers on my computer because my internet on it is a little wonky (and in general I want to update the drivers anyway). However, when I go to the page "Software and drivers" and enter my name/type of product, I get a message saying "we have found the drivers for your product. Drivers may be in development, so please check back at a later date or visit the product home page. ». There were drivers available here yesterday. How long this change usually take? Can someone help me find the drivers of the template from another computer that might work for my computer? Thank you!

    Hello:

    It looks like all the drivers, specifications and manuals are missing from the pages of support again.

    This happened earlier in the week also.

    Another Member of the forum has reported the problem to administrators forum, which will be in touch tour HP, but since I am not employed by, nor do I represent HP, I don't know how long it will take to restore the missing data to the support pages.

    Whether the weekend will not help much either.

  • Flash Player 11.3.300.262 works only with Firefox. I think I found the problem.

    * Flash Player 11.3.300.262 does not work with Firefox. I think I found the problem.*

    Millions of people got off work & turned on there computers recently to discover that Firefox isn't playing videos or flash content. Like me, millions of people are randomly searching the Internet in an attempt futile and frustrating response. Unfortunately, many of these people will simply stop using firefox & consider a browser glitch, unreliable.

    This happened to me a few days ago. I started my computer and got a pop-up from Adobe saying that I need to update my flash 11.3.300.262 drive. I always thought that Adobe as being a reliable software company, so I clicked on it with confidence that things will take care even more fluid. To my horror, I have relalized that just after the update, my main browser, firefox has been destroyed. Then I went on the frustrating process of uninstalling, reinstalling, running virus scan, search the Internet like a lost child. I thought, "this is why I hate the update of things, because the updates always seem to change things you don't want to change, and there always seems to be a problem with updates." I generally update software month after release, because microsoft & all other software vendors always seem to not test it stuff properly before releasing. We must look a glitchy computer until the next update fixes it. Well, that is my rant. Now, let me discuss the problem I found.

    Problem:

    What I did, go to my menu firefox extensions, I disabled the 11.3.300.262 & I have reactivated the previous flash player. After that, everything worked perfectly again. Then one today (a week later), I turned on my computer and my firefox wasn't playing videos or flash content again. I went into my menu parts of firefox again, and I discovered that my old flash drive has been removed & this 11.3.300.262 new glitch had been activated. Why adobe feel the need of in my computer & automatically delete and update my flash drive. Now, it does not work. It IS REALLY FRUSTRATING!

    The question that I discovered:

    "RealPlayer" is the most popular video show & it's installed on millions of computers. For some strange reason Firefox doesn't want its users to use Real Player. Specifically the RealPlayer Record Plugin 15.0.2. I also discovered that my Plugin 15.0.2 Record of the browser has been disabled automatically when the Adobe 11.3.300.262 is automatically updated too.

    -Maybe this could be because of some conspiracy of copyright law to stop people from downloading videos from the web.

    -Maybe firefox wants people to use it download add-on instead of RealPlayer downloader.

    I don't know what ther reason. But what I know is no one will remove it RealPlayer to computer there is just to use FireFox. We can just use Chrome or Internet explorer. I took advice of people with disabilities the Extention of RealPlayer, FireFox and Adobe. I also went in my RealPlayer preferences options, but there is no option to disable the download of FireFox for registration. BECAUSE I have ALREADY DISABLED THE add-on menu FireFoxes.

    Solution:

    Step 1: Adobe needs to update all computers with the previous flash player. In this way we can choose to activate the previous flash player in our FireFox. or wait for a new update fixes the problem with firefox.

    Step 2: Adobe & FireFox need to get together and go back to the drawing board. They need create an update that actually works on computers with of Real Player installed on them. I don't like that the company made the update. All I care about is if it works. Thank you.

    Oh yes, Im market FireFox 13.0.1, Windows 7, computer HP, Real Player is up-to-date.

    FirefoxAdobeNotWorking wrote:

    We all that business leaders like every penny of profit and there ready to layoff anyone to keep this benefit. Suffice to say.

    Mozilla is a not-for-profit organization, and Adobe will not loose anything if you switch to chrome or IE.

  • I FOUND THE SOLUTION FOR THE TX WIRELESS PROBLEM!

    Hi guys,.

    IM pretty happy problem because I found the solution for my tx 1219 us wireless!

    First of all, my laptop started with wifi problems. Then, when I tried to start, nothing has been posted.

    I read a lot of posts on forums that talking about changing the motherboard by HP.

    I sent my knees to HP in Argentina - where i live - and they had sent me a budget with a «renewed» system map

    I was paying, so I pretend a new.

    Tired and frustrated on the HP customer service: they dosen´t recognize their mistake. They dosen´t give me GUARANTEE AND they pretend a lot of money for something refurbished!

    I found a post where a guy - now away for me is 'God' - explains how to fix this problem yourself! AND a lot of positions where other guys did, and they confirm that it works!

    Here's the method. Feel happy!

    This post is for the repair of the range of following HP laptop: tx1000, dv2000, dv6000, dv9000, with AMD processors and graphic chips from nvidia (6150go).
    Symptoms are more, wireless wireless card are running out, are repeatedly, the laptop, it does not ignite until several attempts and finally the laptop turns on but he did not have no image in the monitor, in some models, you listen to some sounds.

    The cause is excessive overheating of the GPU from nvidia, which has powered up to 100 degrees or but tends to fail the welds that unite it to the mother of the card.
    HP already admitted the existence of the failure in the design of the card, and extended 2-year warranty, so that if even you can demand but the desirable thing is to do, the method I describe is simple and has worked in 100% of those laptop with this problem, prefer all must do it under your own risk.

    Step 1. -It is necessary to compile the necessary material: this is a 1-cent American copper currency or a currency that similar thickness now about a 1/16 of an inch, or a piece with these features, but the copper. also we will need a table lamp with a halogen centre, or the one with the normal centres but it is 150W or but case is that it heats up a lot. disipadora thermal paste of what they take microprocessors (sold at any electronics store).

    step 2. -Once gathered our components, it is necessary to remove the mother card and remove the radiator so that they are exposed to the microprocessor and the nvidia chip.

    Step 3. -Now, we are committed to the lamp, started to warm up a while, in my case I have tapeworm a gun to measure temperatures and saw that it was 134 degrees, once it is hot we close set, but the thing at latest, the graphics chip, but on the other hand, where all the solder points are seen We leave about 5 minutes, which were both that I gave him, no doubt, it can be less, depending on the source of heat, once that done this we have pressed with the fingers with force the graphics chip (care, it will be hot), which will be expanded by heat welding is to merge.

    Step 4. -Now, we put a little disipadora in the room by both parties and we placed on the graphics chip and put the radiator and arm!

    It is with the intention of wrong correct dissipation system design since the heat produced by the chip is transferred to the coin in copper.

    Copper is an excellent conductor of heat and thus provide the heatsink of makes, initially was clearly a very small between the radiator and the chip and when warm itself does not transfer not warmth to any party since not thanks to the air, it can, but the copper coins made this work

    Greetings

    Message edited by Wendy on 30/04/2009 21:02

    Please see the procedure on YouTube

    http://www.YouTube.com/watch?v=musu759LsT4

    Message edited by Wendy on 30/04/2009 21:02

  • Windows crashes software when it cannot verify the Publisher * found the problem

    * Found the problem, thank you anyway

    I use Windows XP and IE8, and I am trying to allow the installation of ActiveX controls.

    I get the following warning of safety and error: "Windows has blocked this software because it can't verify the Publisher.

    To protect your computer, Windows crashes software when it cannot verify the Publisher. »

    I have read a dozen forums and tried all the tips. I don't know what I'm doing wrong.

    I tried going into the tools of IE tab and changing the security options to "allow software to run or install even if the signature is not valid.

    I unchecked the boxes to "verify signatures.

    I passed the security settings and select: fast for "Unsigned download Active X controls" and: ask the user 'initialize and script ActiveX controls not marked as secure..'  and 'activate' to 'run ActiveX controls '.

    I even added the IP domain in my zone of confidence and lowered my security level to 'low '.

    I also remembered to close and restart IE.

    I always get the error message when you try to leave the site to install ActiveX. controls.  FYI the ActiveX is remote viewing of a security camera.

    If anyone has any other clues that could help me with this problem I would be very grateful.

    Fancy

    Thanks James, but I found the problem.  There was an extra box that I neglected to "verify" that allowed to install unsigned files.  I thought I had checked and unchecked everything related but I missed a.  Scary lengths windows go to protect me! :)

    Fancy

  • C:\windows\ayofeworit.dll the specific module could not be found, the message pops up when loading office

    C:\windows\ayofeworit.dll the specific module could not be found, the message pops up when loading office

    Here are the detailed instructions that protect you and solve your problem in the 'right' way.
    There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you can't find a good explanation for the name of the file in a Google search, re chances while your system is currently or has been infected with malicious software.

    A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.

    It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
    Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
    So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

    You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

    If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
    If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
    Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
    Here is a link to a popular registry backup tool:
    You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
    Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
    When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
    .  You are really interested only a few sections.
    The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
    Scroll through the list and look for a boot entry associated files in the error message.
    If you can't find on the connection tab, look in any tab.
    You can also click file, search to search for logon, or any tab for all or part of the name of the element.
    Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
    Given that you had or have an infection, followed with this:
    Perform scans for malware, and then fix any problems:
    Download, install, update and do a full scan with these free malware detection programs:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.
    Restart your computer and solve the outstanding issues.
  • Laptop thermal overheating found the Trojan

    My laptop 2000-41OUS began to close with a thermal overheating BIOS message. It sounded as it was put to the test, running loudly. I've learned to control programs and of course, many have been installed I have no download. I removed them and still close. Finally found a Trojan and cleaned to Symantec. The race so sweetly now I can't hear it. I'm afraid that overheating may have damaged the fat layer that protects him. I should take it to a computer shop and what should they do?

    Hello CatLoraine,

    I can certainly understand your concern. There is usually no need to redo the thermal compound, thermal paste or a poorly mounted radiator is the culprit for overheating. If the laptop isn't overheating now so I wouldn't worry on this subject.

    You can monitor the CPU to increase temperature while using it to see where it is located in HWMonitor is a good and free to use. Install only the Bit version for your system (32 or 64-bit) http://www.hwinfo.com/download.php

    This way you will have a good idea how hot it is actually done.

    But if it makes feel you better, you can certainly take it to a technician looking at him.

    Really, I would be more concerned by what you have found the infection that caused the overheating.

    Honestly, realize that using the malware removal software can not 100% guaranteed a clean system nor can it correct any damage was left of malware. Especially if you are not known in the removal of malware.

    If its possible, I would consider reloading Windows in the factory for a peace of mind.  And to all least, recovery disks has not been burned yet, if now.

  • NtrigApplet - unable to connect to the driver: failed to open device___TVAgent.exe - Entry Point not found the procedure entry point PowerReadACValue could not be found in the dynamic library POWRPROF.dll

    Hi all

    I have a HP TouchSmart tx2-1025dx Notebook PC Vista... I met 2 large pop-up windows that will not close & appear as soon as I turn on my computer gives me a time DIFFICULT to access anything whatsoever...

    They read as follows:

    NtrigApplet - unable to connect to the driver: failure to open the device

    TVAgent.exe - Entry Point not found the procedure point PowerReadACValue entry is not found in the dynamic library POWRPROF.dll

    CAN SOMEONE PLEASE HELP?
    THANK U :)

    Hi the apprentice 85,

    Remember to make changes to the computer before that happened?

    Looks like the problem is hardware or software related, I suggest you follow the below mentioned steps below to refine the question

    Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

    If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

     

    Step 2: Put the computer to boot to determine which program is causing the problem

    Follow step 1 in the link below,

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

    Continue with the remaining steps to pin-point on the third party service.

    After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

    Important: n ' forget not the computer to start normal follow step 7 in the link.

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Display problems - I found the Office to be tight on the right side of the monitor

    When I turned on the pc, the other day I found the Office to be tight on the right side of the screen. This means that when I opened a window, I can't see down them, close them, buttons etc and the als my taskbar to bottom right of the screen sound now hidden. Background does not seem to be changed. Any help would be really useful. Tell

    Hello

    There should be a button of automatic reset of the monitor to correct alignment problems

    and try this

    try going to your graphic card manufacturers site or computer and are looking for the driver download section

    Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

    then try to make the screen of solution of problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  • found the new keyboard controller pci hardware

    I had a massage n my office says "found new hardware n asked for a disk to install a driver but do not have." Anyone know what her soul?

    found the new keyboard controller pci hardware

    Simply cancel in the message and we will fix the problem manually.  You say that it is a PC keyboard controller.  Did you just install oee or install a new keyboard or hardware or driver changes at all on your system?

    You can get in trouble with your device (specifidallly the keyboard or keyboard controller) drivers.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  Look especially devices associated with the keyboard.  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you should for the keyboard and the keyboard/controller and like many others that you have time to do - they are making contributions beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

    This should solve the problem.  If it is not or you do not find drivers for the position of keyboard controller to return with more information about the keyboard controller that you can find.  The keyboard works fine without this "new material"?  Tell me what you see in Device Manager on the keyboards or keyboards/controllers. Go to the Actions and click Scan for New Hardware and tell me EVERYTHING he says he says he detected new hardware.  Keep clicking and copy everything it says until you get to the point where he asks a disc install a driver (before you get to that point it will ask probably if you want to search for a driver - Windows answer Yes and see if it works (it probably won't, but it's worth a shot).)  Either you added something, or something that was already there became active or something that was already installed got corrupted and lost its driver and therefore act as if it was a new piece of hardware.  In all cases we need to IDENTIFY this material so that we can drivers for it (or you will continue to see this message every time you start).

    If you are unsure that you have installed anything new, then I suggest that you only contact technique the customer computer manufactuerer by phone or chat online help to identify the material and the location of device drivers to it.

    I hope this helps.

    Good Lluck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Maybe you are looking for

  • bearings does not not in Firefox 7 on OS Lion

    I just installed Firefox 7 on my new iMac, running on an OS Lion 10.7.2 and found that all States hover (bearings) do not work here at all, I dun get dropdown menus or css change of color in my own Web sites or on other sites. I moved some of my file

  • Satellite L855 - Quickstart PDF Doc

    Is there a PDF version of the Quickstart document? Thanks in advance.

  • Can I use the laptop without the battery?

    Hello The other day, I bought my first laptop. A 17 '' HP Pavilion running Windows 7. My question is can I remove the battery and just run through the power cable? I heard that you can with some laptops, but not with others. I have take the laptop wi

  • The desktop icons are dimmed?

    My desktop icons are faded- Recently I was infected by several viruses at first, I couldn't see anything even on the desktop. I ran virus removal software and removed all, well I think. Sort in works much better, but the only thing is my most much of

  • Caddy needed hard drive for HP 6005 Pro SFF

    I have a HP 6005 Pro small form Factor (SFF) PC that has no hard drive or caddy presents. Where can I get the caddy? I also have a 2nd hard drive can be added, what I have to add an additional HARD drive?