Similar Questions

• I don't know what error code I get when trying to install KB974417, KB963707 and KB939683. I found a solution for KB974417 which is to install the latest Windows Installer. What about the others? KB963707 and 939683.

  I installed Windows Installer 4.5, because the support microsoft inform me that I have the latest Windows Installer Package to install KB974417. But I can't find solutions for KB963707 and KB939683.

  To get the Windows error meets during updates, you can try to read the Windowsupdate.log file using the http://support.microsoft.com/?kbid=902093 article

  Also try the few measures available under article http://support.microsoft.com/kb/971058, the http://support.microsoft.com/kb/822798 and the http://support.microsoft.com/kb/906602 if they relate to your error.

• Solution for Webcam sleep & back problems after the upgrade to Windows 7

  Just thought I'd share the solution I recently found a problem I've had since a Satellite Pro A200 GE 26 Q of the upgrade from Vista to Windows 7.

  I installed the software webcam for windows 7 on the toshiba site and built-in Chicony camera would work very well after a reboot, but if the computer is in sleep for a long enough period, the unit would stay asleep when the computer woke up and wouldn't work at all, unless the computer has fully restarted.

  The solution lies in a change in the registry to force the computer to update the webcam USB controller is attached, after the release of sleep. It was apparently the default for Vista when it was released, but was changed in Vista SP1 and Windows 7. Designed for Vista original material which did not have its drivers/registry updated entries could therefore be subject to a failure because of changes to the default settings through the updates of windows. Toshiba, it seems, do not think that this issue then of the extinction of the registry fix for Win7 upgrades for the satellite Pro A200. Therefore fix manually.

  The article where the solution is here: [http://support.microsoft.com/kb/928631]

  You do NOT have the file of the fix, you must only make the change to the registry described later.

  You need turn on the camera while you do the following to make sure that it appears in Device Manager correctly.

  Step 1: Determine the specific USB host controller

  
  # Click on * early *, enter devmgmt.msc #the * search * box, then click on * devmgmt.msc* in the * list of programs.
  # The * view * menu, click on * devices of * connection *.
  # Expand the processor node. For example, expand * ACPI * Multiprocessor PC *. (In my case, * ACPI x 86 based PC) *.
  # Extend * system compatible ACPI Microsoft *.
  # Extend * PCI Bus *. Several USB host controllers will be listed.
  # Expand each USB host controller node, and then expand successive subnodes until you find the name of the device that is failing. For example, the device entry might look like the following: ACPI Multiprocessor PC\Microsoft ACPI-Compliant System\PCI Bus\Intel (R) \ICH8 family USB Universal Host Controller - drive root Hub\fingerprint 2830\USB * (Note: for me, I found the webcam to ACPI x 86 PC\Microsoft ACPI-Compliant System\PCI Bus\Intel (R) \ICH8 family USB2 Enhanced Host Controller - 283A\USB Root Hub + USB Composite Device\Chicony USB 2.0 Camera-based) *.
  # When you have located the device, right click on the associated and then USB host controller click on * properties *. In the example that is listed in step 6 you would right-click * Intel(r) ICH8 Family USB Universal Host Controller-* 2830, then click on * properties *. (* Again, for me it was different - ICH8 Family USB2 Enhanced Host Controller - 283 a *).
  # Click on the * details * tab.
  # Select * pilot key * in the list. The driver key will look like the following. Note the last four digits of this driver key. {36fc9e60-c465-11cf-8056-444553540000} \0002 * (on my system it's: (36fc9e60-c465-11cf-8056-444553540000) \0005*).
  
  
  

  Step 2: Add the ForceHCResetOnResume registry value for the USB host controller

  
  # Click on * early *, type regedit #in the * search * box, then click on * regedit.exe* in the * list of programs.
  # Find and then click the registry subkeys that are similar to the following: * HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contr ol\Class{36FC9E60-C465-11CF-8056-444553540000}\Four-digit_number.* in this step, the numero_a_quatre_chiffres is a placeholder for the USB devices in the system.
  # You must search the registry subkey by using the value that you noted in step 9 above. For example, if the key of the pilot to step 9 is * {36fc9e60-c465-11cf-8056-444553540000} \0002*, then you need to get * HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contr ol\Class {36FC9E60-C465-11CF-8056-444553540000} \0002. (For me, as mentioned above, this was \0005 (36fc9e60-c465-11cf-8056-444553540000)). *
  # On the * Edit * menu, point on * New * and then click on * DWORD value *.
  # Type# * ForceHCResetOnResume * to the name of the DWORD and then press ENTER.
  # Right click * ForceHCResetOnResume * and then click on * edit *.
  # In the * boite box the value data, type# 1 and then click on * OK *.
  # Exit the registry editor.
  # Restart the computer.

  This fixed the problem for a long time for me. I'm writing this in case it helps someone else who has the same problem. If anyone from Toshiba never reads this, you might consider adding the registry fixes for upgrades of windows 7 on the download page for this & all other models affected.

  Big Hey what s announced and detailed, thank you! :)
  I m wondering how you discovered it.

  But I want to add something: before you make or change something in the Windows registry, make a backup of it. In the worst cases, restore you the old Windows registry. Just to be sure ;)

• Found a solution for Alt Tab does not

  This isn't a question but a solution that took me about a month to find.  Always found Alt Tab to change the programs does not work, and when I flew over the bar at the bottom of the screen, the picture postage stamp of the application would be flashes on once before disappearing.  Sometimes, I could simply not an application open to maximize.

  Usually I use my HP laptop to a workstation, but when using it in another place, noted that the problem had disappeared.  Figured there was something on the workstation.  Tried to return to the job and work through a process of trial and error found was a Logitech USB Skype speaker.  It is a fairly old model - may 2007 - I got as a freebee when I bought a PC.  It does seem like Windows 7.  Disconnected and there is no other problem.

  Hope this helps someone else.

  We all love the good old Windows Alt + Tab feature to quickly switch between open windows. Although Windows Vista and Windows 7 provide Flip 3D feature to switch between open windows, most of the users of love again Alt + tab feature.

  If you regularly use Alt + Tab feature, then here is a small utility to fine tune. Alt + Tab Tuner is a small tool to tweak Alt + tab with ease settings.

  With Alt + Tab Tuner we can twist Alt + tab margins, grid inches, spacing, icon shift and size, size of thumb and transparency. In addition, it also lets switch you to the old Alt + Tab dialog.

• Web services CF10, components not found - the seller Java problem?

  Did someone having problems web services in Oracle Java CF10, IIS 7 calls,?  We have recently improved, and web services are now back the error message depending on whether the component is not found:

  The web service operation has caused an exception of invocation.

  The root cause was that: coldfusion.runtime.CfJspPage$ NoSuchTemplateException: could not find the ColdFusion component or interface

  
  

  The web service must be created in cfadmin?  It won't let me.  I was understanding the cfinvoke webservice call would create the webservice, but this isn't.

  
  

  Any information outside of Adobe documentation I've read would be useful.

  
  

  We have this same file on four different servers.  It works on two of the four.  The only difference I see in the server settings in addition to the CF and the operating system version, is the vendor/version of Java.
  

  
  

  1 CF10, Java Sun, IIS 7.5.7600.16385 - work
  

  2 CF8, Sun Java - work
  

  3 CF10, Java, Oracle - does not
  

  4 CF10, Java, Oracle, IIS 7.5.7600.16385 - does not
  

  
  

  Thank you.
  

  It turns out that it was a matter of nomenclature of directory.  Directory has a period in it (for example, domaine.org).  Once the period has been removed from the directory name, it worked.  For some reason, it worked fine in CF8 but not CF10.  I hope this helps someone else.

• Macs! I found a solution for a u44m1p7 error.

  This could not be the cause of your problem, but have a look at the error log (displayed when you press more information, after the failure of the update) and see if there is any mention of the Adobe folder in Applications not being is not to load the necessary corrective measures.

  With respect to the Applications/Adobe folder.

  Look at your file, and then see if it's actually a good record and not a tiny Unix (a dark grey icon) file. If it is the small file delete.

  Re install the app photoshop or indesign, and it should work.

  For non it professionals like me, the reason is that the patches need a House to go. The computer is confused between a folder and a file with the same name "Adobe". Now that you have removed the installer can create it's own here and put all the patches in there.

  Adobe team - please check this and let people know.

  If anyone has this problem, share it if it worked.

  Here is a picture of what looks like the particular error, indicated in orange.

  

  Hi RebeccaWooWah,

  Please see "Applications" folder, you should see a file named "Adobe".

  Please delete the file, as it is corrupt.

  Create a "Adobe" folder in the Applications folder, the problem should be solved.

  Thank you

  Atul Saini

• A solution for cache reset randomly in Windows 8/8.1

  After, I scream with a reset of the cache random ExpressCache in point 8.1 of Windows. Now, I found a solution for this problem.

  Just disable fast start of Windows 8/8.1. Solved!

  (Dashboard-> hardware and sound-> Power Options-> choose what buttons to-> change settings that don't are currently not available-> turn off the quick-start-> save changes)

  I think that because quick start feature in Windows 8/8.1 is not a full stop (they call hybrid sleep). Thus, ExpressCache confuse maybe on the power stage when you shut down your computer and try again you OS.

  Here is a quick start function information in Windows 8/8.1

  http://blogs.msdn.com/b/B8/archive/2011/09/08/delivering-fast-boot-times-in-Windows-8.aspx

  Hope this solution can solve your problem and sorry for my bad jurisdiction English.

  It works 100% for me so far. I turned off Win 8.1 quick start and now the cache is not reset at each stop.

• HP Pavilion dv6-6141eo wireless problems with

  Hi Experts,

  I have windows 7, 64 bit and Intel Centrino Wireless-N 1030 wireless cards, I updated the driver 3 times in the hope of solving the problem, I now have version 15.1.0.18

  The problem is that despite the fact that I had a strong signal of the connection is intermittent, descends and connects again a few seconds later. Making it impossible to do things with this pc, for example to connect to other networks, download, etc. Very frustrating.

  One other annoyance, is that it takes a minute to connect to the wireless network when to wake up after sleep mode. It seems that it does so faster, just a few seconds if it is a reboot or start after his stop.

  I searched, goggled and have not found a solution for this.

  Thank you.

  Fortunately, I managed to solve it. In short, he did by removing the Intel My WiFi technology software and install a new version of driver.

  The steps I did:
  1.I checked with what version of driver adapts the system automatic web tool from Intel.
  2 downloaded the driver from the Intel site, the version that comes with the software, not just the driver.
  3. uninstalled the existing driver.
  4. ran the installation and did not go for the standard, instead chose only not to install my WiFi techonology. This actually uninstalled what I had.
  5. it worked!

  My findings below

  (1) I think that the software Intel My WiFi technology was interfiring when the laptop was trying to connect.
  I figured that this is because whenever the laptop awoke, a message in the notification area, said that My WiFi has been disabled. And there was no way to enable it. I had to wait a minute to connect to the network, but still my watched wifi disabled. Perhaps an incompatibility between the soft version and driver.

  (2) trust on the recommendation of the automatic detection tool with some intel on its support site.
  Before I had the 15.1.0.18 version because it was the highest, I had found and hoped that it would fix the prob but it didn't. So I uninstalled and installed the tool suggested me instead: 14.3.1.1.

  Now uninstall of intel my wifi or the installation of the driver 14.3.1.1 What did the trick? I do not know.
  You can try first to just install the driver first.

  Tip: I found the link below useful same prob and a fix.
  http://communities.Intel.com/thread/20785?start=0&TSTART=0

  Thanks & best regards. Gabriel.

• I have a toshiba laptop purchased recently. After the scheduled updates it does not recognize the wireless network. I have to do a system restore. is there a solution for this problem?

  I have a toshiba laptop purchased recently.  After the scheduled updates it does not recognize the wireless network. I have to do a system restore.  is there a solution for this problem?

  Hello

  Make sure you have the latest network adapter drivers fron toshiba

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  and if windows update is at the origin of the problem change how to get updates to uncover the problem update

  When you have found the issue, a right click on it then invited uac then hide

  read the information on the link below

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• I found the solution for the problem of sound-acpi with Satellite P100-219

  Hello

  I found the solution for the problem of sound-acpi with Toshiba P100 (it works with P100-219 at least). I can provide the source modified and compiled table DSDT, but I would like to know if it is possible to get these changes in the next update of the BIOS?

  See you soon,.
  MIK

  Hi Mik

  As you know that it is not possible to find info on the next BIOS, especially if you want to have some information about the Linux operating system. Just wait and see if some forum users pointed out something on the subject.

• has someone at - he found a solution to the search for global marker?

  has someone at - he found a solution to the search for global marker?

  the glaring omission of global search for markers - or exclusion of metadata to the project search function marker - is a big handicap for any project of long form doc.

  Is there a work around or maybe a plan to remedy this bizarre situation in an upgrade?

  big fan of the first, and even if there is plenty of downturns, it seems as if there is always planned if solutions non-existent

  Thank you!

  Hi Charliepus,

  Sorry about that. Create a feature here: http://adobe.ly/feature_request

  Thank you
  Kevin

• Is there anything I can change/device manager/cmd Vista for my job wireless in the slot 2 PCI?

  System:
  E Machine T5086
  Vista Home Premium 32 bit SP2
  Intel Pentium 4 3 GHz
  2gigs RAM
  MOBO: 4006173RIntel (Coryville 2) 945G Motherboard
  Wireless card: Hawking HWPG1 device name of PCI card wireless 802.11 g: Ralink RT61 Turbo Wireless LAN Card

  Background:
  I recently installed a PCI-E ATI Radeon HD4650 gfx 1gig card. Unfortunately, with the fan attached, it's a bit too thick to sit safely far from my wireless card that is located in the upper part of the PCI slot. So, I took and it goes down a slot. (I have only 2 pci slots, a pci-e). The card is recognized, the drivers are installed, it is part of the work, there is no conflict, no exclamation, nothing in Device Manager. However, the internet does not work, and he recorded as "disconnected" or "disabled" in the network and sharing Center. So, when I look for to connect to networks, none never appear. I have other computers in the House. Wireless works fine on all others, showing our fine network. The card worked previously above the slot without any problems and always done if I put it back in there. -I don't understand the pci card is a little old, however, the way it has worked well in the first period, I don't want to buy a new wireless card, only to have it also not work in slot 2. It is very possible, there just a problem with this slot, not sure how determine that. Looking for a Windows hotfix.

  Also: No. I am not return my gfx card for a 'thin' (which also means diminished gfx capabilities). : P if there is really no viable, I'll get a good wireless USB adapter, however if someone of you recommend.

  Troubleshooting based on other threads:
  *. Tried to change all the settings in the pci bios. There is nothing to resolve. My particular bios does not have very many parameters to set except the activation or deactivation of devices General.

  1. I uninstalled the drivers and the software wireless is related (through the Uninstall/Change & Device Manager), then allowed the system to detect and ask to install it again in the same session. (I have a configuration saved in my folder for download from hawking.)

  2. uninstalled wireless again. Restarted. Reinstalled.

  3 uninstalled. Stop. Out of the wireless card. Starting without a card. (idk why) Stop. Return the card. Started & reinstalled.

  4 uninstalled. Starts in Mode safe. Reinstalled.

  5 documented IRQ settings. IRQ 22 is used by my wireless card and the "High Definition Audio". So tried combinations of uninstalling/disabling audio through settings manager & bios of the device, uninstalled audio software and then installed the wireless card (Eitherway, both devices specify "no conflict" while two permits.)

  6. check my diary of events for apparently relevant errors. Don't know what than a bunch of other things from the East, but is "WARNING: autoconfiguration WLAN Service stopped successfully." So, who researched and tried a few corrections: cmd > netsh > wlan > set autoconfig enabled = yes interface = "wireless network adapter" I get "no such wireless device found." I also tried with "wireless network connection" that I got the same error.

  7. in respect of the above, I tried cmd in admin mode > sfc/scannow > came into services to start the wlan. But these instructions fail because it is already started / auto services.

  8. Finally uninstalled all my ATI software and released the gfx card. Also uninstalled the wireless. Restarted. Re-installed the wireless.

  9 tested back in first Pci wireless. Works. Put back in place in the 2nd, does not work. Gfx card is always out ATM plugged into a cable LAN to have internet at the moment. I was surprised that winupdate found a update for my wireless card, but I have install the driver was the one I used when remembered first install the card waaay back when. Eitherway. Updated. It still does not.

  10. I tried through the Hawkings own connection utility: "Utility of zero Configuration." "passage" to zeroconfig fails or seems to do nothing. ZeroConfig also register my card wireless as "disconnected."

  About to give up because I'm not sure what I can try. I read on attempt to failover to ACPI standard, but I don't have the windows cd. Other methods to do it without the CD and by Device Manager were futile because the options were there to do. The purpose of the level crossing was to attempt to circumvent the automatic IRQ assignment in case that is the question, I'm going to.

  Thanks in advance to anyone who can give an idea. Clues or comments are appreciated just to help me to work along, even if we don't find the right solutions. There are quite a few others "hit my 2nd slot, no internet wireless ' sick out there. Hope that eventually you will help all out.

  Hello

  It's probably the shared IRQ that creates it.

  Get a wireless connection of USB you can connect with a USB extention cable and place it over the system and it should work.

  Example, http://www.newegg.com/Product/Product.aspx?Item=N82E16833166022&cm_re=usn_wireless-_-33-166-022-_-Product

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Error "Windows has encountered a problem installing the software driver for your device." Windows found driver software for your device but encountered an error trying to install it.

  So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get.  Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.

  Well, I found the solution, just in case anyone has the same problem.  Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.

• Is the time capsule the best solution for me?

  Dear Apple Support,

  I'm looking for a good solution for the following:

  -economy of mey Macbook Air 13 "wireless backup

  -Storage of files from various media (videos, basically)

  -Playback of multimedia files (iphoto library and mkv videos) on my Smart TV (wifi capable, and endowed with a multimedia player)

  I think a Time Capsule and Apple TV, but before buying it, I want to be sure those will satisfy the above requirements.

  Thank you for your answer!

  Kind regards

  Tamas

  If you format a drive for mac to use as a Time Machine backup format there is a chance your smart TV will be able to read this disc.

• Solution for Thunderbird 25.0 crashes after installing the provider 1.0.2

  After noticing that this supplier had stopped working, I checked and found that the old Google API had been abandoned. The author of provider advised to change provider 1.0.2 on an interim basis, but in the meantime 1.0.3. I did and Thunderbird crashes whenever he started. the solution for me has been upgraded to the latest Thunderbird 31.2 and then opt to accept the last module lighting during all up to.
  Therefore, any thing now return to normal. Phew, it was scary! A big thank you to the author of supplier for the display of the note on the disappearance of the old Google API. My system was running 8.1 Win

  I prefer CalDav. Then you don't need supplier and it is less a thing which must be maintained to the appropriate version.

  Note that this web page:

  https://blog.Mozilla.org/calendar/2013/09/Google-is-changing-the-location-URL-of-their-CalDAV-calendars/

  more than a year, so is the given version numbers are obsolete. However, it is always good for the process of connecting to your calendar.

  Previous versions of lightning are here:

  https://addons.Mozilla.org/en-us/Thunderbird/addon/lightning/versions/

  which is useful if you need run other than the Thunderbird later.