I get a blue screen in the middle of what I doing a = m

blue screen popping up all the time

How to diagnose and resolve blue screens (BSOD): Notebooks.com

Tags: Windows

Similar Questions

  • I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

    I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

    Hi KevinRy,

    Welcome to the Microsoft Answers site!

    Unplug all external devices.

    Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

    Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

    1.

    Right-click my computerand then click Properties.

    2.

    Click the Advanced tab.

    3.

    Under Startup and recovery, click settings to open the Startup and recovery dialog box.

    4.

    Clear the automatically restart check box, and then click OK many times necessary.

    5.

    Restart your computer so that the settings take effect.

    Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

    Please reply back with the error message you get because it helps us to resolve the error.

    Kind regards
    Amal-Microsoft Support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I get a blue screen in the main window to develop the module

    I just downloaded LR6 from CC Adobe on my new computer laptop > it worked fine on the old laptop, but now I have a problem. I imported the photos that look very well, but when I try to open on (one) in the develop module I get a blue screen in the main window.  The image appears in the navigator Panel. I use Windows 10, which I never used before LR.

    Lightroom preferences-> Performance tab, disable the GPU option. It may be necessary to restart Lightroom.

  • Im just get a blue screen, where the image should be in the develop module. What is happening with the Raw and Jpeg images. The display of the preview in the toolbar. Any ideas?

    Im just get a blue screen, where the image should be in the develop module. What is happening with the Raw and Jpeg images. The display of the preview in the toolbar. Any ideas?

    Disable GPU acceleration. Under preferences-> Performance, clear the check box

  • the pc switches work and I get a blue screen when the driver is installed

    INSTALLATION DRIVER CAUSES BLUE SCREEN AND SWITCHING TO AND SUITE

    I have re-installed windows xp pro several times and everythong is going fine until I install the drivers from the disk. pc switches work and I get a blue screen with a RECOVERED FROM A GRAVE... message. I also have a xp(not professional) of windows disk, it works with the drivers, but the pc doesn't seem to work as well. I want to run xp pro version, that's why I bought it. Help, please.

    It makes no difference, what version of Windows XP, you install, it will make no difference to his execution, or use. (with the exception of you want to join a domain)

    If your PC boot after installing winxp pro, visit your PC manufacturers site, or the site of the motherboard and to get the latest drivers for Windows XP a go from there

  • R310 Gets a blue screen during the installation

    I have a R310 failed with a blue screen. I tried to boot from the OS from Dell disk and do a clean install on the original hard drive and a new hard drive.

    Installation works normally but gets a blue screen at 10% or 20% (random) during file extraction.

    What is the RAID controller that is faulty

    any suggestions?

    THX

    Gavincr001.

    What is the stop code that is displayed on the blue screen? Also, you can check if the server is updated in the BIOS, iDrac, controller of life cycle, as well as the raid controller in the server? If some of them get obsolete now, it can cause stability problems. Let me know what the stop code is that you see and I will be able to better understand what is causing the problem. In addition, what is the OS you are using?

    Let me know.

  • Blue screen in the Middle using the mode to develop

    I'm from Lightroom 6/CC.  I can import pictures and they show on the film along the bottom and one selected displays in the upper left corner of the screen.  If I select a photo, it shows in the middle of the screen. When I go to develop fashion, my image is replaced by a blue screen.  If I hit the 'R' key to crop, the image will flash briefly, but won't.  How can I get the image to display (or make the blue screen disappear)?  What I am doing wrong?  Please help as I can't make any progress.

    Thank you

    Dan

    Hi Dan,.

    • Go to Lightroom > Preferences.
    • Go to the performance tab and uncheck the box "use graphics processor.
    • Restart Lightroom and see if it works.

    Concerning

    Tanuj

  • Receive an error message blue screen with the instruction on what to get but its double all of the Dutch.

    Blue screen

    Keep getting blue screen last message is ' disable or uninstall all defragmentation or anti-virus disk backup, utility-check disk hard configeration and check the updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.   It's all double Dutch to me, maybe someone can help me and tell me in plain English what to do.  Jackson

    Hi minetbeaugoss,

    ·         Did you do changes on the computer before the show?

    Follow these methods.

    Method 1: Disconnect all external devices, start the computer and check if the problem persists.

    Method 2: Follow these steps:

    Step 1: Start the computer in safe mode and check if the problem persists.

    A description of the options to start in Windows XP Mode

    http://support.Microsoft.com/kb/315222

    Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click on restart to restart the computer.

    Method 3: Follow the steps in the article to check the drive for errors.

    How to perform disk error checking in Windows XP

    http://support.Microsoft.com/kb/315265

    Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  • In Lightroom development Mode, I get a blue screen when the photo should be

    I have a new Dell with Windows 10.  I installed only creative cloud, Photoshop and Lightroom so far.  Camera Raw is also referred to as a current version.for my 7 D Mark ii.  Photoshop seems to work very well.  When I go to windows, and import a jpg or Canon raw files, I see them well in library mode but when I click on the mode to develop, I get blue by filling the entire section that the photo should appear.  Nobody knows what will fix this problem?

    Disable the "use of graphics processor" in the Preferences/Performance tab.

    See other messages-

    Lightroom and Photoshop blue screen with white X

    Re: Mounting of scene from 'Developing' Photos

  • in the develop module, I get a blue screen when the image should be. The peak is disabled on the side, but not in the big box

    All I get in the design module is a blue screen. Can someone help me solve this problem?

    Stephanie, please see: https://helpx.adobe.com/lightroom/kb/lightroom-gpu-faq.html, let us know if this helps.

  • Only get a blue screen on the desktop after starting the computer.

    Original title: after the empty office startup

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: Windows Vista operating system - why only empty office display blue screen with no program icon shows the office after the computer starts?

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hi osterjo,

    1. When did you start to question?

    2. you remember to make changes to the computer before this problem?

    I suggest to start the computer in safe mode and check if it works very well.

    To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start in safe mode select and press to enter.

    Check out the link for more information on starting your computer in SafeMode below:

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Please return back with the results to help us continue with troubleshooting.

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • When I try to develop my photos I get a blue screen, but the browser will display my image?

    I am running the latest version of lightroom, but I don't see my image in the pane to the point, it shows only a blank blue screen, however you can see the image on the part of the browser on the left?

    Anyone know what I am doing wrong?

    Hi andrewa.

    It seems to be a problem because of the graphics processor.

    Go to the Lightroom preferences > performance > uncheck 'use graphics processor' and then check.

    Kind regards

    Claes

  • Get error blue screen at the opening of Lightroom "KERNEL_SECURITY_CHECK_FAILURE."

    Bonjoiur, this is the first time that I post on the forum

    suddenly every time photoshop cc text or another version, I find myself with a blue screen marked "KERNEL_SECURITY_CHECK_FAILURE", once photoshop uninstall I encounter more this problem, despite the fact that I've got resets the system function factory problem persists, thank you very much for your help, I never had this problem before, very cordially

    * Hello, after many check is the new update of the

    Nvidia driver "361,43" that there were problems so I handed my

    old version "353.84" and after several test yesterday and today.

    I have more problems, this will certainly be one other

    people of the Forum, cordially. Kelyas (Hello, after many)

    the audit is the new update of Nvidia driver '361,43' which

    been a problem, so I gave my old version "353.84" and after several

    test yesterday and today, I have no more problems, it will certainly

    has others in the Forum, cordially. (Kelyas *)

    *

    *

    On 26/12/2015 14:12, Jitendra Khatwani wrote:

    >

    Hello I'm present dominik, suddenly whenever

    text photoshop CC or another version gives me screen

    blue marked "kernel_secrityure, I've never had this problem.

    previously, once photoshop uninstall problems

    Thank you a

    created by Jitendra Khatwani

    https://forums.Adobe.com/people/Jitendra+Khatwani> in /Photoshop

    General discussion /-see complete discussion

    https://forums.Adobe.com/message/8330797#8330797>

  • Why do I get a blue screen with the error STOP: 0x0000007E every time I turn on my computer?

    Error message: STOP: 0x0000007E (0xc0000005, 0xB42E09AC, 0xBA4E39B4, 0xBA4E36B0)

    Here is the text of the BSOD:

    STOP: 0x0000007E (0xC0000005, 0xB0B9B9AC, 0xBA4DF8AC, 0xBA4DFSA8)
    Kbdclass.sys - address BOB9B9AC base at B0B9B000, DateStamp 48025372
    Some of the Stop line numbers change but their pretty much the same content. There is no C:\Windows\Memory.Dmp file on this computer.  Sorry it takes so long

    The Kbdclass.sys driver that is referenced is the keyboard class driver that is a component of Windows.

    It is possible that the accident might actually be due to a third-party keyboard driver.

    If you have installed a third party (for example. Keyboard Logitech driver) can update you or, if necessary, uninstall the third-party keyboard driver and see if the error resolves?

    Article on Microsoft:

    http://support.Microsoft.com/kb/313050

    In accordance with article Logitech Mouseware software can also cause the error.

  • My guard computer shut down for the past 3 weeks. I have not installed anything new. I get a blue screen with the PFN_List_Corrupt.

    More information about the problem:
    BCCode: 4th
    BCP1: 0000000000000099
    BCP2: 00000000003E667F
    BCP3: 0000000000000000
    BCP4: 00000000003E677F
    OS version: 6_1_7601
    Service Pack: 1_0
    Product: 256_1

    Can anyone help.

    Check in the most recent discharge has not been activated.  What are the results of the auditor/Reset?

Maybe you are looking for