I get a blue screen says bug code using the driver. and the backup file. I don't know what to do and my computer no longer works. I have windows vista

Similar Questions

• Had to reformat my hard drive, now when I try to reinstall Windows XP I get a blue screen with this code at the end 0x0000007b.

  has had to reformat my hard drive now when he star0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000)

  has had to reformat my hard drive, now when I try to reinstall windows xp, I get a blue screen with this code at the end 0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000) how to solve this problem

  Hello

  I saw the 0x0000007B BSOD caused by trying to install XP on a disk hard while the BIOS is designating the reader as AHCI instead of IDE. XP has no native AHCI drivers, resulting in a stop 7B. Unless the PC had originally Vista or Win 7, but it might be useful to check that it is not likely.

  If the BIOS is set to AHCI, you could do one of three things (depending on whether your PC has a floppy drive)...

  1 find the Setup F6 disk on AHCI support at installation time (start with the manufacturer's website if you do not already have such a thing). Watch the very hit F6 prompt early in the installation process.

  2. change the setting in BIOS on IDE / ATA

  3. create a new "slipstreaming" installation disc drivers AHCI in the existing installation disc, see http://www.nliteos.com/index.html

  After the back if your BIOS is IDE / ATA

  Tricky

• When I try to open Firefox on my PC for the last 4 days, I got a message saying that he was not able to load XPCOM. I don't know what it is, or why I'm suddenly United Nations

  When I try to open Firefox a little box pops up saying "could not load the XPCOM. I don't know what or why it started 4 days ago. Online directions are not useful.
  Help, please.
  Thank you!

  Hello

  What have you tried so far?

  Can you try reinstalling Firefox? Uninstall it from your control panel > programs and features/add / remove programs (if you want to keep your bookmarks and other information, not deletion of personal information). After uninstallation, delete the Mozilla Firefox folder to remove the remnants of files damaged uninstallation (your profile is in a different location, so will not be affected by the present):

  • (installation of 32-bit) C:\Program Files\Mozilla Firefox
  • (installation of 64-bit) C:\Program Files (x 86) \Mozilla Firefox

  Download and reinstall the latest version:

  • https://www.Mozilla.org/en-us/Firefox/all/

  For more information, see

  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• Turning on my computer I get a blue screen saying 'Checking file system on C:.

  Original title: can not enter Windows

  Turning on my computer I get a blue screen saying "checking file system on C: the type of file system is NTFS.  The volume is dirty.  CHKDSK checks the files (step 1 of 3)»  It freezes ever complete the check, and I have to manually turn off the computer.  I can't get into Windows and also get this message in SafeMode.  Thank you.

  Hello

  We can refer to the following article and first try Method 3 and check if that helps.

  Chkdsk.exe or Autochk.exe starts when you try to shut down or restart your computer

  If you're able to boot in SafeMode woth command prompt, then you also, try Method 2 of the above article.

• Hello! I live in Brazil, I try to buy the creative cloud to the picture and it does not work because I changed the country! I don't know what's wrong, they say to call this 1800 426 570 phone number but no work at the Brazil! Does anyone know another fo p

  Hello! I live in Brazil, I try to buy the creative cloud to the picture and it does not work because I changed the country! I don't know what's wrong, they say to call this 1800 426 570 phone number but no work at the Brazil! Does anyone know another phone number to provide payment information?

  Hi Luciano,

  Please click on the following link: Contact Customer Care

  *Remember to stay signed with your Adobe ID ( email id used to purchase the subscription ) before accessing the link above*.

  Select the exact options indicated below in the capture to get support of screen options:

  

  Let us know if that helps.

  Kind regards

  Sandrine Bani

• I get a blue screen with a code 1000008e error.

  Signature of the problem:

  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  More information about the problem:
  BCCode: 1000008e
  BCP1: C0000005
  BCP2: 82C3B72D
  BCP3: CED616B0
  BCP4: 00000000
  OS version: 6_1_7601 Service Pack: 1_0 product: 768_1
   
  Screens with these codes of original blue title: can someone help after the reboot.

  These accidents were caused by the corruption of memory (probably a driver).
  Run these two tests to check your memory and find which driver is causing the problem.

  * Don't forget to download any other DMP files (especially those running auditor)

  * If you are overclocking reset all default before running these tests.
  In other words STOP!  If you don't know what it means that you probably are not

  
  1 - Memtest.
  
  * Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. http://www.memtest.org

  * Boot from the CD and let it run at least 5 or 6 passes.

  * Don't forget, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.

  * Test the sticks individually and if you find a good, test it in all slots.

  Any error is indicative of a memory problem.

  If a well-known stick fails in a slot of motherboard, it's probably the slot.

  2. Driver Verifier
  
  Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver.

  * But sometimes it will crash and will not tell you the driver.

  * At other times it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.

  * I would suggest that you first back up your data and make sure that you have access to another computer so you can contact us in case of problems.

  * Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).

  * Under Windows 7, you can do a startup repair disk by clicking Start... All programs... Maintenance... Create a system - with Windows Vista repair disc, you need to use your drive installation or from the "Repair your computer" option at the top of the Safe Mode menu.

  So, here is the procedure:
  -Go to start and type "auditor" (without the quotes) and press enter
  -Select 'Create a custom settings (for code developers)' and click 'Next '.
  -Select "Select individual settings from the list complete" and click "Next".
  -Select all of the items EXCEPT FOR 'Low Resource Simulation' and click 'Next '.
  -Select "Select driver names from a list", then click "next".
  * Select all drivers that are NOT supplied by Microsoft and click on "Next".
  -On the next page, select "Finish".

  * Restart the system and wait as he crashed to blue screen.

  * Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation.

  * If you are unable to Windows because it crashes too early, try safe mode.
  * If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.

  * Further reading
  'http://support.microsoft.com/kb/244617 '.

  Using Driver Verifier to identify issues with Windows drivers for users advanced

• I have problems with random blue screens - 1st BC Code - of the suggestions?

  I have problems with random blue screens - 1st BC code - all others are zeros.  6_1_7601 OS version, produced 768_1.  Any suggestions?  My computer is a model of HP P7-1235.

  Thank you.

  The minidump files showed two errors blue screen, an error KMODE_EXCEPTION_NOT_HANDLED (1e) referring to the amdxhc.sys and an error SYSTEM_SERVICE_EXCEPTION (3B) referring to the usbfilter.sys:

  Bugcheck 1E, {0, 0, 0, 0}

  WARNING: Unable to verify timestamp for amdxhc.sys
  ERROR: Module load completed but symbols can be loaded for amdxhc.sys

  Bugcheck 3B {c0000005, fffff8000f4770c5, fffff880085feb10, 0}

  WARNING: Unable to verify timestamp for usbfilter.sys
  ERROR: Module load completed but symbols can be loaded for usbfilter.sys

  The amdxhc.sys is the AMD USB 3.0 driver and the usbfilter.sys is the AMD USB filter driver.

  The amdxhc.sys is dated January 3, 2012 and the usbfilter.sys is dated November 16, 2011.

  Two of these drivers should be updated to the latest version to ensure compatibility with the motherboard and between them.

  HP has an available Update for AMD USB 3.0 driver but I do not see an AMD USB filter driver available for your computer updated.

  I might suggest to try to get the package of motherboard chipset from AMD for versions newer and compatible to the two pilots.

  You can try the "AMD Chipset drivers' starting from the following link which should update the two drivers.

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

  I recommend to create a System Restore Point before installing the new motherboard drivers.

• While playing some games I get different blue screens. Include messages: WHEA ERROR INCORRIGIBLE and a common one is CLOCK WATCHDOG TIMEOUT.

  While some games I get different blue screens and I can not understand what causes them, this only happens when I play a bit of some games. Include messages: WHEA ERROR INCORRIGIBLE and a common one is CLOCK WATCHDOG TIMEOUT. I tried a new install of Windows 8 and this problem still occurs these games has worked on the same computer with Windows 7.

  Original title: Windows 8 BSOD

  Tom

  They have been linked to the material (since obviously you re-installed), two of them were corrupted because of the speed of the accident.

  If you're a clocking over please return to default (overclocking pushes the material beyond the design of the ists)

  Please run a malwarebytes scan before starting on the underside

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

  Stop 0 x 124 is a hardware error
  If you are overclocking try to reset your settings to standard processor and see if that helps.
  If you keep getting the BSOD here are things more than you may want.
  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.
  
  Stop 0 x 124 - what it means and what to try
  Synopsis:
  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.
  

  Generic troubleshooting ' Stop 0 x 124 ":

  1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.
  (2) ensure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).
  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.
  (4) update the BIOS of your motherboard according to the manufacturer's instructions.
  Their website should provide detailed instructions on the brand and model-specific procedure.
  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.
  6) trying (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use the 3 rd-party memtest86 utility to run several hours a test value. (6-8 passes to stress the ram)
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.

  
  7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:
  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.
  (9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

• Why do I get a blue screen when I go in the develop module?

  I just installed LR cc on my new Dell laptop.  I loaded 40Photos from a SD disk.  Al came fine in the library module, but when I went to develop I had a bright blue screen.  It was obvious that the photo was somehow behind the screen.  The controls right acted as if the photo was on the screen.  I tried the Reset, but nothing has changed.  If I made a comparison, I received the photo on one side and the blue screen on the other. I must have accidentally hit something but can't for the life of me what it was.

  Go in Edition > Preferences > Performance and uncheck CPU graph use, that should fix.

  You can also try updating your graphic driver and see if you can work with the active graphic processor.

• When I start my computer I get a blue screen saying "unmountable_boot_volume".

  original title: Blue Screen of Death

  When I turn on my PC, it goes to the blue screen of death which says: unmountable_boot_volume, then it displays information about the new hardware or software, then:

  Technical information:

  Stop: 0x000000ED (0x8737D980, 0xC0000006,

  Do you mean something like this:

  STOP 0X000000ED (XXXXXXXXXXXXXXXXXXXX)
  UNMOUNTABLE_BOOT_VOLUME

  where XXXXXXXXXXXXXXXX is a bunch of giberish?

  If so, you could give this link, at a glance:

  http://support.Microsoft.com/kb/297185

  Note that there could be a loss of data.

  Hope this helps

  Post back if necessary

  _______________________________________________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Get a blue screen when I'm in the middle of something. Running Windows 7 Home and student on a new computer laptop.

  Running Windows 7 Home and Office on a laptop computer brand new and am startint to get the blue screen often enough so that in the middle of something.

  The screen came back 1 or 2 times, but usually, I restart and hope the laptop comes back to life at this time.

  Had he come back and tell me that Windows Outlook does not close properly and that he wants me to reinstall the program.

  This laptop is only a month and a half, am also under Norotn 2010, on this, the protection against viruses.

  Thoughts or ideas for me?

  Thank you.

  As the laptop is barely a month old and a 1/2, it is under warranty.

  Communicate with the computer laptop manufacturer A.S.A.P. and make a claim.

  Make a claim because it may be the precursor of future problems with your laptop and you want this connected with the manufacturer.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  For problems with Outlook:

  http://answers.Microsoft.com/en-us/Office/ee861097.aspx

  Outlook Help Forums at the link above.

  They will help you with your Outlook questions when repost you in the Office Forums above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Blue screen issue whenever I use the Torrent Client Please Help!

  Hello...

  Everything was ok, all of a sudden, I continue to receive the Bluescreens he said netio.sys caused the Bsod!...
  It occurs only when I try to use the Torrent Client (Utorrent, Bittorrent).
  I tried to update the network drivers, but could not find new ones on the dell support Web page.
  The mini dump files: https://www.dropbox.com/s/qq4djw4clgakniw/102713-20935-01.dmp   
  https://www.dropbox.com/s/89pw0hifsqmil28/102813-25147-01.dmp
  Please help me solve the problem.
  Run Dell Inspirion 15r N5110
  Intel i5 processor
  4 GB Ram DDR3
  GPU NVIDIA 525 m

  Update : I was surfing for some corrections. I came across this link (http://www.troublefixers.com/utorrent-crashes-windows-7-with-blue-screen-of-death/)

  I asked he'll keep this post updated.
  UPDATE 2 : link above the fixed Solution! : D

  Steps to disable Teredo

  Step 1: On the start menu, search cmd, Windows locate the cmd.exe which is the prompt, right click above and clock on run as administrator.

  

  Step 2: On the command prompt, type the following command and press enter

  netsh interface set disabled state Teredo

  

  This is it, its done. Hope you find the above easy to follow trick.

• I get a warning sound without showing anything. just the sound. How will I know what it is?

  XP... been said that it is something in the settings maybe I changed? Hear even on my main screen when I turn on the computer also. That is to say, Facebook too. Need HELP Please, it's driving me crazy.  Thank you. JM

  Is it not possible to record and transfer it using skydrive or another file sharing service? It is probably a notification of the motherboard or it could be a virus infection.

  -Alex

• I get error messages ie3sh.exe - Unable to locate the BHO component. DLL not found message when I start my computer. I do not have the reinstall disk that I need to do.

  I also 80070490 error codes and C355. I used CCcleaner to clean my registrys and used the system preparation tool. I regularly use spybot search and destroy for malware protection and search for viruses with my anti-virus program. What should I do? Thank you.

  BHO. DLL & IE3SH problems on my computer starts?
  http://answers.Microsoft.com/thread/ffbe5016-84d9-47E0-8303-43419c1abba5

• I KNOW THAT THE CODE OF THE PRODUCT, BUT I DON'T KNOW THE VERSION OF WINDOWS.

  BOUGHT A USED LAPTOP AND THE COA IS SO WORN THAT WHILE I CAN READ THE CODE OF THE PRODUCT, I CAN'T READ THE CODE OF WHAT VERSION OF WINDOWS IS FOR. WINDOWS7 HOME PREMIUM INSTALLS, BUT THE CODE ON THE LABEL MIGHT BE FOR A DIFFERENT VERSION OF WINDOWS. ANY IDEAS?

  It's very probably Windows 7 Home Premium of the three common editions.

  Because it is already installed, you can try the product key, because it is already installed:

  Press Windows key + R

  Type: slui.exe 3

  Press enter

  Enter the product key and click next to activate via the Internet.

  To learn more:

  http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/