I get a corupted file when I run the installer

I'm with windows 7 and when I run the installer I get a message file corupted

try to download again http://mozilla.cdn.leaseweb.com/firefox/releases/8.0.1/win32/en-US/Firefox%20Setup%208.0.1.exe

Tags: Firefox

Similar Questions

I am trying to change my product key and get a 0x800402c9 error when I run the product key Wizard

Update product key

I'm trying to change my product key and get a 0x800402c9 error when I run the product key Wizard, so I am unable to enter the product key

You must acquire the recovery discs right from the manufacturer - if you're lucky, your office don't reinstall it properly and leave you with the recovery partition that would do the same job.

Read your manual, on the recovery of the system and try the options there.

If they do not work, you will need to contact it manufacturer and order a set of htem recovery disks.

Why when I run the installer for Windows 8 consumer preview on my computer of Windows XP Home Edition he says: "this platform is not supported"?

Setup of Windows 8 consumer priview

Why when I run the installer for Windows 8 consumer preview on my computer of Windows XP Home Edition he says: "this platform is not supported"?

You can see this message if you downloaded Windows 8 64-bit and XP 32-bit. To start the installation of Windows 8, you will need to restart and boot from the installation of Windows 8 media.

If you want to keep your current installation of Windows, you can install it on a separate partition and dual boot with the Windows 8 Preview of consumer. To install on a separate partition and dual boot, you must create and boot from the installation media.

(1) first you will need a free partition on hard drive - if you do not you can shrink a partition and create a new one to install Windows 8 Preview of consumer on.
To reduce a partition and add a new one that you can use EASEUS Partition Master (free):
http://www.partition-tool.com/personal.htm

(2) to install on a separate disk, you can perform an installation DVD or USB key, then boot from it so you can choose the other partition. To download the ISO file and install media:
Download Windows 8 consumer Preview ISO:
http://Windows.Microsoft.com/en-us/Windows-8/ISO
After you download the ISO file - use the Windows USB/DVD Download tool to install media:
http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

(3) installation on a separate partition for dual boot:
1 make a DVD or USB installation drive - to see the two options above.
2. start from the DVD or USB install drive and click on install when prompted.
3. during the installation process, when asked - choose a custom installation.
4. Select a free partition on the hard disk to install Windows 8 Preview of consumer - this will install Windows 8 on a separate instead of your current Windows partition partition.
5 continue with the installation.

First of all please note:
1 consumer preview Windows 8 is a pre-release and will only work for a limited time - when it expires, you need to remove it.
2. the overview of consumption is stable and has been tested, but it s not the finished product. Your PC may crash and you may lose important files. You should backup your data and you shouldn't test Windows 8 Preview of consumers on your primary home or business PC.
3. If you install the preview of consumption on the Windows partition is currently installed, you cannot uninstall the preview of consumption. To return to your previous version of Windows, you will need to reinstall from the recovery or installation media supplied with your PC.
4. in addition to dual boot, here are a few methods to install Windows 8 Preview of consumers without affecting your current installation of Windows:
(A) remove your current hard drive and install the Preview of consumers on a spare drive.
(B) install it on a spare computer.
(C) install the Preview of consumer in a virtual machine.

For more information - Windows 8 consumer overview FAQ:
http://Windows.Microsoft.com/en-us/Windows-8/FAQ

How to get a form empty when we run the page?

Hi all!
Hope you are well
My question is, How to get empty a form at run time? means that when we run the page, text fields is filled with white... Could someone please help me with this...
Thanks in advance,
Nanda.

Hi Nanda,

Just follow these steps:

(1) create a stubborn taskflow (uncheck create with fragments box)

(2) drag the CreateInsert operation on your narrow-minded taskflow and mark it as the default activity

(3) drag a view and the CreateInsert a link to the component view using a case of control flow

(4) double click on the view to create the page

(5) slide the view object in the page as a form of ADF

6) back to your narrow-minded taskflow and the general tab make sure you under visibitliy you select "url-invoke-enabled.

You run tasfklow and your form will be rendered in insert mode.

Concerning

Antonis

During cleaning after reinstall the update Ver 33 and "Could not load XPCOM" when I run the installer for worm 33 he says "your download was interrupted. Now, what

Running Windows 7. After Firefox updated to the Version 33 Firefox would not start. Received the message "unable to load XPCOM. Follow the instructions in the forum Firefox to do a clean reinstall. File downloaded from Mozilla.org , using Internet Explorer for Firefox does not work. Deleted the old program file. When I try to run the Firefox Setup Stub file 33.0 continues to stop. The message says "your download was interrupted. I tried to run several times all with the same result. I also made sure I deleted previous downloads before trying to re. Anyone know how to fix this? Thanks for your help.

Do a clean reinstall and delete the program folder before Firefox to (re) install a new copy of the current version of Firefox.
- Download the full Firefox installation program and save the file to the desktop
  https://www.Mozilla.org/en-us/Firefox/all.html
If possible to uninstall your current version of Firefox to clean the Windows registry and settings in the security software.
- Do NOT remove the "personal data" when you uninstall your current version of Firefox, because this will remove all profile folders and you lose personal data such as bookmarks and passwords including data profiles created by other versions of Firefox.
Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.
- (32-bit Windows) "C:\Program Files\Mozilla Firefox\"
- (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
- It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
- http://KB.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but do NOT delete personal data when you uninstall Firefox which removes all Firefox profile folders and you lose your data.
- http://KB.mozillazine.org/Profile_folder_-_Firefox
- http://KB.mozillazine.org/Profile_folder_-_Firefox
- http://KB.mozillazine.org/Profile_backup
- http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

What is the current size of the download for Firefox package? I have a dial-up connection and clicking on the "latest version" link s look as you get an exe file which only manages the installation, so there must be more.

The download starts with Firefox Setup 6.0.2.exe, but I still struggle with "setup" programs that seem to be of reasonable size (it is estimated that 45 minutes to download), but once launched, starts a download of ten hours.

This should be easily accessible information about the site... What is the size of total download if the current Firefox installation package?

Yes, nothing else is necessary.

When I execute the installer is coming us encountered the following problems, Setup was unable to initialize

Hello
I downloaded Adobe Flash Professional CC and when I run the installer is coming:-
We encountered the following problems
Setup could not initialize.
What should I do now? Please help as soon as possible. Thanks in advance!
Kind regards
Mary

start at the top and work your way down to apply applicable patches until your problem is solved.

If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html

If your error is:

"Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.

first of all, rename folder OOBE OOBE.old.

to find the OOBE:

Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE

Win 32 bit OS: Program Files \Common Files\Adobe\OOBE

Mac os: HD > library > application support of > adobe > caps

Mac os: USER > library > application support of > adobe > OOB

If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.

If you use an installation dvd:

Copy the contents of the drive in a desktop folder and install from this directory.

If you are using a mac:

1. try to create a new user account in Mac with administrator privileges.

2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the

3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.

4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.

5 restart the installation.

If everything is applicable above fails, check your Setup logs:

http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html

Get an error message when turning on the computer, then just get a black screen after the message saying cannont find script file c:/windows/run.vbs

Original title: windows does not

I have windows 7 and get an error message when turning on the computer, then just get a black screen after the message say cannont find script file c:/windows/run.vbs

What can I do?

Enter your bios usually with keys F2 or delete to the first powered

Use default Optimize can be the F5 key and save and exit,

Insert your installation disc or flash media and press F8 or F12 to boot on it

Then use the recovery tools to run the Startup Repair tool.

http://Windows.Microsoft.com/en-us/Windows/Startup-Repair-FAQ#1TC=Windows-7

URGENT::opening multiple files - i have 3 files in my directory... When I run the code I can open a file and read it... but the while loop get blocked after the first iteration... can someone me help or give some indications

bbmChatDB of public database;

public static FileConnection fconnRead = null;
public static String fileReadData = "";
public static InputStream is = null;
data Byte [] = null;
DataInputStream is = null;

Here is my code...

I have 3 files in my directory... When I run the code I can open a file and read it... but the while loop get blocked after the first iteration... can someone me help or give some indications

try {}

FileConnection fc = Connector.open("file:///store/home/user/documents/BSM/") (FileConnection); "

If (fc.exists ()) {}

Enumeration e = fc.list ();

While (e.hasMoreElements ()) {}

System.out.println ("files are:" + (String) e.nextElement ());

play this file
StringBuffer stringBuff = new StringBuffer();
try {}
System.out.println ("opening file")-;
System.out.println ("file name is:" + (String) e.nextElement ());
fconnRead = Connector.open("file:///store/home/user/documents/BSM/(String)e.nextElement(),Connector.READ_WRITE) (FileConnection);
System.out.println ("data length")-;
If (fconnRead.exists ()) {}
is = fconnRead.openDataInputStream ();
data = IOUtilities.streamToBytes (is);
Ddd = new String string (data);
fileReadData = ddd.toString ();
System.out.println ("length of data:" + fileReadData.length ());
System.out.println ("read data :" + fileReadData);

}

} catch (IOException ee) {}
ee.printStackTrace ();
System.out.println ("Exception in the read data :")
+ ee.getMessage ());
}

}
}

} catch (IOException e) {}

e.printStackTrace ();
}

{Finally

try {}
If (is! = null) {}
is. Close();
}
System.out.println ("is closed...");
} catch (IOException e1) {}

E1. PrintStackTrace();
}

If (fconnRead! = null) {}
try {}
fconnRead.close ();
} catch (Exception e) {}
System.out.println (try ());
}

}

}

You can recode this treatment so that it uses only:

e.nextElement ())

Once a loop iteration.

Directly at the start saying something like:

String fileName = e.nextElement ());

and use fileName everywhere in your loop.

Also be aware that printStackTrace() will do nothing in your situation, it only works if you catch Throwable. So make sure you something output all your catches exception and also have a catch (Throwable t) to catch the things you miss, as follows:

{} catch (Throwable t)

t.printStackTrace ();

System.out.println ("Eception exception:" + t.toString ());

}

I think your code is thrown an exception and you don't see it.

I am trying to install some Elements 9 on a new computer. I downloaded the files, .7z, .exe and run the installer. When I try to open the items, I get an error message "please the product using Setup.exe in the root folder of installation/uninstallation.

I am trying to install some Elements 9 on a new computer. I downloaded the files, .7z, .exe and run the installer. When I try to open the items, I get an error message "please the product using Setup.exe in the root folder of installation/uninstallation. I did it

Hello

Please see error: 'Please install Adobe installation using Setup.exe' when you install non-English versions of Adobe Creative Suite 3

Hope that helps!

Kind regards

Sheena

Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

Restore point:

Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

Try a restore of the system once, to choose a Restore Point prior to your problem...

Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

Download the ISO on the link provided and make a record of repair time it starts.

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

When you have changed that, insert the Bootable disk you did in the drive and reboot.

http://www.bleepingcomputer.com/tutorials/tutorial148.html

Link above shows what the process looks like and a manual, it load the repair options.

NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

Read all the info on the website on how to create and use it.

http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

It's a very good Vista startup repair disk.

You can do a system restart tool, system, etc it restore.

It is NOT a disc of resettlement.

And the 32-bit is what normally comes on a computer, unless 64-bit.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Data recovery, if/before you reinstall:

1. slave of your hard drive in another computer and read/save your data out there.

2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

3 Alternatively, use Knoppix Live CD to recover data:

http://www.Knopper.NET/Knoppix/index-en.html

Download/save the file Knoppix Live CD ISO above.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

http://isorecorder.alexfeinman.com/isorecorder.htm

Download the Vista software from the link above.

After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

Click on the icons of hard drive to open and to understand which drive is which.

Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

See you soon.

Mick Murphy - Microsoft partner

I get the 0x8078012D error code when I run the Windows backup on an external hard drive.

I get the 0x8078012D error code when I run the Windows backup on an external hard drive. I have Windows 7 Professional. That suggests this error code is the problem and how can I solve the problem?

For people who read this thread, I offer the following information. I solved the problem by noticing that the problem could have been caused, when the system image is created. So I did a backup without creating the system image and backup is complete without error.

Then I used the backup program to create a system image. This time error (0x8007045D) was displayed. The error report says "the operation failed for a device error encountered with the source or the destination. If the volume of the source or the destination is on a disk, run CHKDSK /R on the source volume or destination and then try again using. »

So I ran chkdsk/r, and this program is a bad sector on the hard drive of my computer and fixed the error. It took about an hour to run the program. Now, the image of the system and the backup of data file work again.

So I think that the main cause of error (0x8078012D) is deborahgarbe of i/o error (0x8007045D). So if you get the first error code you can search for fixes for the second error code fix the root cause.

R12.2.5 Installation on OL 7.1 ERROR: RW-50010: error:-script returned an error: 1 RW-50004: error code when you run the external process. Check the log file for more details

I tried to install EBS 12.2.5 on OL 7.1 with rapidwiz and got this error when applying the unique patches in second File System
"Second system logfile file - /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/logs/12021641.log.
LOG FILE:
_____________________________________________________________________________________________________________________________
Step 0-8
Command: /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/adrunfmw.sh
Step 4 of 8: UNIX making pretreatment
Running: chmod 777/db/oracle/OraInventory r
chmod-r 777/db/oracle/OraInventory succeeded
Step 4 of 8
Performance: known appltest - c "/ app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/adrunfmw.sh".
PHASE of INSTALLATION has BEGUN: APPS TECH STACK: Wed Dec 2 17:27:07 IST 2015
runProcess_1
StatusString installation of Applications Technology Stack
Copy the temp area models
Inventory name is: app_oracle_TEST_fs2_Oracle_EBS_app
One-time fixes copy to temp area
Remove JDK_TOP: / app/oracle/TEST/fs2/EBSapps/comn/util/jdk32 if there is
/ App/oracle/TEST/fs2/EBSapps/comn/util/jdk32 deleted directory
Installation of WebLogic Server.
With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWLS.xml
L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWLS.xml oracle.apps.fnd.txk.config.InstallService
WebLogic Server successfully installed
Web Tier utility installation.
With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWeb.xml
L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWeb.xml oracle.apps.fnd.txk.config.InstallService
Level successfully installed Web utilities
Registration EBSUsing /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instEBS.xml
L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instEBS.xml oracle.apps.fnd.txk.config.InstallService
EBS registered successfully
Rename/home/appltest/bea/beahomelist in /home/appltest/bea/beahomelist.29266 to avoid problems during WLS
patching
/ Home/appltest/Bea/beahomelist renamed successfully.
Application of ad hoc patches
With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instASpatches.xml
L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instASpatches.xml oracle.apps.fnd.txk.config.InstallService
Fatal error: T2K install Service
oracle.apps.fnd.txk.config.ProcessStateException: OPatch process failed: Output = 1 see log for more details. CMD = perl /app/oracle/TEST/fs2/FMW_Home/webtier/OPatch/opatch.pl apply - verbose - silent - ocmrf /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd/admin/template/txkForms_ocm.rsp jdk - / app/oracle/TEST/fs2/FMW_Home/webtier/jdk/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/patches/7695070/7695070
at oracle.apps.fnd.txk.config.OPatchActionNode.processState(OPatchActionNode.java:312)
at oracle.apps.fnd.txk.config.PatchActionNode.processState(PatchActionNode.java:187)
at oracle.apps.fnd.txk.config.PatchNode.processState(PatchNode.java:338)
at oracle.apps.fnd.txk.config.PatchesNode.processState(PatchesNode.java:79)
at oracle.apps.fnd.txk.config.InstallNode.processState(InstallNode.java:68)
at oracle.apps.fnd.txk.config.TXKTopology.traverse(TXKTopology.java:594)
at oracle.apps.fnd.txk.config.InstallService.doInvoke(InstallService.java:224)
at oracle.apps.fnd.txk.config.InstallService.invoke(InstallService.java:237)
at oracle.apps.fnd.txk.config.InstallService.main(InstallService.java:291)
Can not install the unique patches
RW-50010: error:-script returned an error: 1
RW-50004: Error Code when you run the external process. Check the log file for more details.

It was recorded in /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/logs/12021641.log and I don't know how to find another newspaper for such details as mentioned in this journal. Please help me with that.

Concerning
KasunA

Found a workaround. The problem is that, before the 7695070 patch is applied, the installation program backup directory/apps/fs2/FMW_Home/webtier/jdk in /apps/fs2/FMW_Home/webtier/jdk_backup_existing_version, but then it clears. / jdk - the patch fails because it can't find it. I had to rename the directory of the jdk for jdk2, and as soon as it gets deleted quickly and rename jdk2 jdk. Then he applies the patches without problem. A symbolic link would do the same thing.

When I run the "@ddl_setup.sql" on a node of the 11gr2rac getting errors

I want to open DDL replicate of the source node, so I run
SQL > @marker_setup
Marker setup script
You will be asked the name of a schema for Oracle GoldenGate database objects.
NOTE: The schema must be created before running this script.
NOTE: Stop all replication DDL before starting this installation.
Enter the Oracle GoldenGate name schema: ogg
Table marker installation script is completed, run the script to check...
Please enter the name of a schema for GoldenGate database objects:
Name of schema setting for OGG
MARKER TABLE
-------------------------------
Ok
SEQUENCE MARKER
-------------------------------
Ok
When I run the "@ddl_setup.sql" on a node of the 11gr2rac getting errors
SQL > @ddl_setup.sql
Configure Oracle GoldenGate DDL replication script
Verify that the current user has privileges to install the DDL replication...
You will be asked the name of a schema for Oracle GoldenGate database objects.
NOTE: For a source of Oracle 10 g, the basket of the system must be disabled. For Oracle 11 g and later, it can be activated.
NOTE: The schema must be created before running this script.
NOTE: Stop all replication DDL before starting this installation.
Enter the Oracle GoldenGate name schema: ogg
Working, please wait...
Line to the ddl_setup_spool.txt file
Checking the sessions that hold locks on the tables of metadata Oracle Golden Gate...
Full version.
Using OGG as Oracle GoldenGate scheme a name.
Working, please wait...
Script of DDL replication configuration has completed, run the script to check...
Please enter the name of a schema for GoldenGate database objects:
Name of schema setting for OGG
CLEAR_TRACE STATUS:
Error on line/pos
-------------------- -----------------------------------------------------------------
No error no error
CREATE_TRACE STATUS:
Error on line/pos
-------------------- -----------------------------------------------------------------
No error no error
TRACE_PUT_LINE STATUS:
Error on line/pos
-------------------- -----------------------------------------------------------------
No error no error
INITIAL_SETUP STATUS:
Error on line/pos
-------------------- -----------------------------------------------------------------
No error no error
STATUS OF THE DDLVERSIONSPECIFIC PACKAGE:
Error on line/pos
-------------------- -----------------------------------------------------------------
No error no error
STATUS OF THE DDLREPLICATION PACKAGE:
Error on line/pos
-------------------- -----------------------------------------------------------------
No error no error
DDLREPLICATION STATE OF PACKAGE BODY:
Error on line/pos
-------------------- -----------------------------------------------------------------
1453/9 PL/SQL: statement ignored
1455/23 PL/SQL: ORA-00942: table or view does not exist
1464/9 PL/SQL: statement ignored
1466/23 PL/SQL: ORA-00942: table or view does not exist
1478/9 PL/SQL: statement ignored
1480/23 PL/SQL: ORA-00942: table or view does not exist
1485/9 PL/SQL: statement ignored
1487/23 PL/SQL: ORA-00942: table or view does not exist
1492/9 PL/SQL: statement ignored
1494/23 PL/SQL: ORA-00942: table or view does not exist
1499/9 PL/SQL: statement ignored
Error on line/pos
-------------------- -----------------------------------------------------------------
1501/23 PL/SQL: ORA-00942: table or view does not exist
1581/4 PL/SQL: statement ignored
1582/18-PL/SQL: ORA-00942: table or view does not exist
1584/4 PL/SQL: statement ignored
1585/18-PL/SQL: ORA-00942: table or view does not exist
1600/25 PL/SQL: ORA-00942: table or view does not exist
1600/4 PL/SQL: statement ignored
1602/25 PL/SQL: ORA-00942: table or view does not exist
1602/4 PL/SQL: statement ignored
DDL IGNORE TABLE
-----------------------------------
FAILURE: The Table does not exist
DDL IGNORED THE JOURNAL TABLE
-----------------------------------
FAILURE: The Table does not exist
STATUS OF THE DDLAUX PACKAGE:
Error on line/pos
-------------------- -----------------------------------------------------------------
No error no error
DDLAUX STATE OF PACKAGE BODY:
Error on line/pos
-------------------- -----------------------------------------------------------------
0/0 PL/SQL: analysis of completed Compilation unit
1/21 PLS-00304: impossible to compile a body of 'DDLAUX' without sound
specification of the
1/21 PLS-00905: OGG object. DDLAUX is not valid
SYS. STATUS OF THE DDLCTXINFO PACKAGE:
Error on line/pos
-------------------- -----------------------------------------------------------------
No error no error
SYS. DDLCTXINFO STATE OF PACKAGE BODY:
Error on line/pos
-------------------- -----------------------------------------------------------------
No error no error
DDL HISTORY TABLE
-----------------------------------
FAILURE: The Table does not exist
DDL HISTORY TABLE (1)
-----------------------------------
FAILURE: The Table does not exist
DUMP DOF TABLES
-----------------------------------
FAILURE: The Table does not exist
COLUMNS OF DUMP DDL
-----------------------------------
FAILURE: The Table does not exist
GROUPS OF LOG DUMP DDL
-----------------------------------
FAILURE: The Table does not exist
SCORES OF DUMP DDL
-----------------------------------
FAILURE: The Table does not exist
DDL DUMP KEY PRIMARIES
-----------------------------------
FAILURE: The Table does not exist
SEQUENCE OF the DDL
-----------------------------------
FAILURE: The sequence does not exist
GGS_TEMP_COLS
-----------------------------------
FAILURE: The Table does not exist
GGS_TEMP_UK
-----------------------------------
FAILURE: The Table does not exist
STATE OF THE DDL TRIGGER CODE:
Error on line/pos
-------------------- -----------------------------------------------------------------
126/9 PL/SQL: statement ignored
128/23 PL/SQL: ORA-00942: table or view does not exist
133/21 PL/SQL: ORA-02289: sequence does not exist
133/5 PL/SQL: statement ignored
657/14 PLS-00905: OGG object. DDLAUX is not valid
657/5 PL/SQL: statement ignored
919/25 PL/SQL: ORA-00942: table or view does not exist
919/4 PL/SQL: statement ignored
DDL TRIGGER SYSTEM STATUS
-----------------------------------
Ok
STATUS OF RACE DDL TRIGGER
----------------------------------------------------------------------
ACTIVE
OF "OGG". "" GGS_SETUP ".
*
ERROR on line 2:
ORA-00942: table or view does not exist
OF "OGG". "" GGS_SETUP ".
*
ERROR on line 2:
ORA-00942: table or view does not exist
OF "OGG". "" GGS_SETUP ".
*
ERROR on line 2:
ORA-00942: table or view does not exist
LOCATION OF THE TRACE OF DDL FILE
------------------------------------------------------------------------------------------------------------------------
/Home/data/app/Oracle/diag/RDBMS/AppStore/appstore2/trace/ggs_ddl_trace.log
Analyze the status of the installation...
THE STATE OF REPLICATION DDL
------------------------------------------------------------------------------------------------------------------------
ERRORS in the installation of software components of DDL replication (6)
Complete script.

I had been struggling with the same problem for 2 days. You run the script as sysdba, how do you get the error then insufficient? I did my first test GG in February. I've been on 11.2.0.3 + patch January + patch for the integrated capture. It has worked well for me. I went back to my GG test week with 11.2.0.3 + patch of July last and ran into the same problem. The solution for me was the last version of GG. See my previous post for the patch numbers.

Post edited by: ursusca

Just had help installation cc 2014. get this dialog box when I open the app. One or more files in the folder required for the operation of photoshop adobe are missing. Help

Just had help installation cc 2014. get this dialog box when I open the app. One or more files in the folder required for the operation of photoshop adobe are missing. Help

Run the cleanup tool to remove Ps CC 2014:http://www.adobe.com/support/contact/cscleanertool.html .

Restart the computer and then try to reinstall Ps CC 2014.

Kind regards

Ashutosh

I get a corupted file when I run the installer

Similar Questions

When I run the "@ddl_setup.sql" on a node of the 11gr2rac getting errors

Maybe you are looking for