I get a message that Generic Host Process for Win 32 Services has encountered a problem and needs to close. How can I get rid of this? It freezes everything up.
I don't really know what the good topic for this problem. I get the message that Generic Host Process for Win 32 has encountered a problem and needs to close. I need to get rid of it because it freezes everything up. No matter if I send or not send the message to Microsoft.
Hi ArdythPhillips,
· Exactly when you receive this error message?
· You did it of any material changes or software on the computer before this problem?
This problem may occur if you use an old HP printer driver or an old HP scanner driver.
If you are using an HP printer, you can follow this link.
Generic host process error message and a flashlight icon appear
To improve the performance of the computer, you can follow this link & check if it helps.
Restore the performance of your computer with Windows XP
Hope the helps of information.
Please post back and we do know.
Tags: Windows
Similar Questions
-
Error message Windows XP Home Edition comes out "generic host process for win 32 services has encountered the problem and needs to close" when you log on windows xp. I found the article exactly to what I have experienced http://support.microsoft.com/kb/821690 but as far as I know, this issue is not caused by an old HP printer. Can you give me the steps to fix this problem other that that link I mentioned. Thank you.
Hello
· You have a HP printer connected to the computer?
If so, try the article you mentioned.
Generic host process error message and a flashlight icon appear
If this is not the case, check to see if this article helps you.
Error messages when you start a Windows XP-based computer and then try to download Windows updates
-
Original title: programs appearing and disappearing
Generic Host process for Win 32 services has encountered a problem and needs to close.
Sorry for the inconvenience.
Please tell this problem to MIcrosoft. We have created an error report that you can send to help us improve the generic
Host Process for Win 32 Services. We will treat this report as confidential and anonymous. To see the data click on send
Error report or not send.
I clicked on the error report, and that's what he said... szAppname:svchost.exe szAppver: 5.1.2600.5512
szModver: 5.1.2600.5755 szModname: ntdll.dll compensate 00023845 etc, etc.Hi 1jimbo1,
1. when exactly you receive this error message?
2. did you of recent changes to the computer?Method 1:
Step 1:
You can try to start in safe mode and check if the problem occurs.
Check out the link for more information on starting your computer in SafeMode below:
http://support.Microsoft.com/kb/315222
Step 2:
If the problem does not happen in safe mode and then, try to perform a clean boot.
A clean boot to check if startup item or services to third-party application is causing this issue.
You can read the following article to put the computer in a clean boot:
http://support.Microsoft.com/kb/310353
If your problem is resolved after the clean boot, and then follow the steps mentioned in the article above to refine the exact source.
After you have used the boot is a way to solve your problem, you can follow the steps to configure Windows XP to start normally.
Method 2:
You can also check the following link and complete the scan line on your computer to check whether your computer is infected with a virus or not.
http://OneCare.live.com/site/en-us/default.html
Thank you, and in what concerns:
I. Suuresh Kumar - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
I get this error message every time I open any application that is internet Explorer, gaming applications, no matter what.
Shortly after this message appears, another appears informing the system shutdown after 60 second countdown. Fixes for this?Cite your version of IE and the full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) when you post in a forum or a newsgroup. Please do it in your next reply.
How did your problem related to Windows Update?
There is a good chance that you see the effects of a hijackware infection!
NB: If you had no installed anti-virus application or subscription has expired at the time where the machine all first infected or your subscription has expired since the machine is not kept fully corrected in Windows Update, don't waste your time with any of the following: Format & reinstall Windows. A repair install won't help!
Microsoft PCSafety provides users at home (only) with free assistance in dealing with infections by malicious software such as viruses, adware and spyware (including unwanted software).
https://support.Microsoft.com/OAS/default.aspx?&PRID=7552&St=1Otherwise, run a thorough for hijackware, including showing the papers required in an appropriate forum.
Verification / help with Hijackware
http://MVPs.org/winhelp2002/unwanted.htm
http://inetexplorer.MVPs.org/data/prevention.htm
http://inetexplorer.MVPs.org/tshoot.html
http://www.MVPs.org/sramesh2k/Malware_Defence.htm
http://www.elephantboycomputers.com/page2.html#Removing_Malware* Chances are you will need to seek the assistance of experts in http://spywarehammer.com/simplemachinesforum/index.php?board=10.0, http://www.spywarewarrior.com/viewforum.php?f=5, http://www.dslreports.com/forum/cleanup, http://www.bluetack.co.uk/forums/index.php, or other appropriate as well.* *.
If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Get error "Generic Host Process for Win 32 Services has encountered a problem.
Original title: generic host and other problems
I'm using XP Prof SP3. I have following problems: 1. get "Generic Host Process for Win 32 Services has encountered a problem..." ' 2. audio past. 3. can't get wndows update downloads, 4. Security Center says "... not started or was stopped. Help please.
Open the command prompt and type this:
sfc/scannow
Let the run command, if the problem has not resolved, try the system restore and restore your system at a time before the problem happens.
-
Original title: I'm under Win XP Pro 64-bit with an amd processor.
Hi all
I get "Generic host process for Win32 services has encountered a problem and needs to close" when I first start the computer, the sound works, but after the old generic host appears the sound does not work? Don't forget that I'm running 64-bit software.
The search does not work.
Any help would be great.
Hi bohawk,
I got to hit this article the error that you are experiencing with your computer. Refer to the same thing, check if the patch is useful.
I hope this helps. If this isn't the case, answer so we can look for other options.
-
After that I connect Internet in 10 minutes and 2 hours sometimes this messega Popes until one disconnects me Internet... I have dial up so when I try to reconnect it says does not detect a modem or a virus protection... then to start my computer acting funny i have to restart. What can I do to fix this?
Hello
We recommend that you reinstall the network adapter driver and check if the problem persists. To do this, visit the site of the manufacturer of the system or the network card and download the driver compatible Windows XP and then install on the computer.
If the problem persists, try the following steps:
Step 1: Check if a system file is corrupt
a. Click Start, click Run, type cmd and click ok.
b. at the command prompt, type sfc/scannow and press ENTER.Note: You will be asked to insert the Windows XP disk, if a file is missing.
For more information, see Description of Windows XP System File Checker (Sfc.exe)
Step 2: If the problem persists, restore the computer
see How to restore Windows XP to a previous state .
b. check if the problem persists.Also check if one of the following articles will help you in fixing the issue.
1 displays generic host process Error Message and a flashlight icon
2 see Generic Host Process for Win32 Services has encountered a problem and needs to close.Visit our Microsoft answers feedback Forum and let us know what you think.
-
How to fix this error "generic host process for win32 services has encountered a problem and needs to close ' help me please I am using windows xp with SP3.
When I close this error or click on send or do not send, my session network remote also network mapped drive United Nations accessible then I restart my computer and I can access my network grows but after awhile once again this error and the same network behavior that I discussed earlier.someone has a better solution that take care of this problem.Hello
Given that the problem is related to the server of the IRIS, IRIS Contact support for assistance:
http://www.IRISLink.com/C2-1967-189/I-R-I-S---technical-support.aspx
Hope the above information is helpful.
-
Whenever I try to download a file, I get a message that the internet explore has encountered a problem and need to close. Can someone explain why this is?
What Service Pack for XP are you running? You use Internet Explorer 7 or 8? If so, you can try this article to see if it solves your problem:
"How to reset Internet Explorer settings"
<>http://support.Microsoft.com/kb/923737 >HTH,
JW -
OP: AppName: asacpisvr.exe_ AppVer: 6.1.1.36_ ModName: unknown__ModVer: 0.0.0.0_ Offset: 1000b63e
tried to clarify some of my options in "run" and I have not typed msconfig startup required and I made a few small changes and now an error message is popping up saying "asus eee pc acpi service has encountered a problem and needs to close" and it keeps popping up. So I went back after it rebooted and has defeated the changes and restarted again and it the error message keeps coming back!
Hello, Gina Cecchetelli,.
The error message and the event log indicates that the problem is related to the ACPI driver. I suggest you reinstall the ACPI driver and check if you have the same problem. Here is a link I found on the Asus website support to download the ACPI driver:
Note: Install the driver requires professional help. I suggest you to contact Asus to help you best in the installation of the drivers.
You may also need to update the Chipset drivers. You can contact Asus to help you with this:
Here is a link that will give you information about Support for Asus information:
http://support.ASUS.com/contact/contact.aspx?SLanguage=en-us
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think. -
Get an error asus eee pc acpi service has encountered a problem and needs to close
I get an error on startup: get an error asus eee pc acpi service has encountered a problem and needs to close
What can I do to fix this?GR Erik Frederiks(Asus EEE PC 1005HA)Hello
Did you change on your computer before the show?
Follow the steps mentioned below:
Method 1:
Step 1: Start the computer in safe mode with network and check the issue
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
If the problem does not occur in safe mode with network, follow the next step to isolate the problem.
Step 2:
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click restart to restart the computer.
Method 2: Reinstall ACPI drivers from the site of the factory
Click on the link http://www.asus.com/Eee/Eee_PC/Eee_PC_1005HA_Seashell/#download and try to reinstall the drivers.
It could be useful!
-
Print shop does not open. He was relocated several times. Every attempt to open the following the error messge program appears: The Print Shop 3.0 has encountered a problem and needs to close.
Hello
Check the event log information when you try to start printing 3.
Procedure to view and manage event logs in Event Viewer in Windows XP
http://support.Microsoft.com/kb/308427
Resolution:
I suggest that you start the computer in a clean boot with printing 3.0 active state.
See the link below to perform the clean boot in Windows XP.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note:
How to configure Windows to use a Normal startup state
After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
- Click Startand then click run.
- Type msconfig and click OK.
The System Configuration utility dialog box appears. - Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.
- When you are prompted, click restart to restart the computer.
-
Original title: Generic Host Process for Win32
A few days earlier, when I restarted my computer, I got an error message indicating that there was an error in the Generic Host Process for win32 and we had to close the program. The only thing it really seems to have an impact on the time is my speakers. I'm not all sounds to play, but when I turn my computer off, he will play the melody of the judgment.
I tried to fix this problem without success. I tried to install the windowsXP-KB894391 package - x86ENU.exe as indicated on the website. However, when I try to install it, I get a message indicating"Setup has detected that the version of Service Pack for this system is newer than the update you are applying.There is no need to install this update. »Any thoughts?Hello Courtney0210,
Thank you for the question!
I'm sorry to know that have problems you with startup error. As I understand it, you get an error to the error of starting in the Generic Host Process for win32 and that the program had to close.
I need to ask you a question to help you best.
Were there any changes (hardware or software) to the computer before the show?
Perform the steps in the link and check.
Error messages when you start a Windows XP-based computer and then try to download Windows updates
Answer to us if you are having problems with error starting or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.
Good day!
Hope this information helps.
-
The error signature:
SzAppName: svchost.exe, Sz App Ver: 5.1.2600.5512.
SZ ModName: ntdll.dll, Sz Mod Ver: 5.1.2600.5755
Offset: 00023845.
Can someone please tell me how to solve this problem.
My system always seems to work OK except that it will not close, it crashes with the message: Windows ends after saving the files needed.
Hello
1. have you done any change in software on the computer lately?
Method 1.
a. start your computer using safe mode (F8 tap about once per second while your computer is in the process of starting up until you get to a screen that allows you to start safe mode).
b. once there, go to your C:\WINDOWS\ServicePackFiles\i386 folder and copy the ntdll.dll file (right click on the file itself and select COPY)
c. and then go to your C:\WINDOWS\System32 folder and click EDIT and then PASTE.
d. click YES to the warning about overwriting of files, and then restart your computer and check.Method 2.
I recommend you to install the free security software from Microsoft. It is easy to install and automatically updated.
Here is the link to download.
http://www.Microsoft.com/securepcSo I ask you to install the Windows Xp Service Pack 3 for stable performance.
It improves the reliability of Windows by installing updates to software - new drivers for hardware and much more.
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=68C48DAD-BC34-40BE-8D85-6BB4F56F5110&displaylang=enI hope this helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Generic Host Process for Win32 Services has encountered a problem and needs to close
I have Windows XP Home Edition, version 2002, service pack 3
The link to "Windows Updates" on the microsoft website does not.
What application or antivirus security suite is installed and your current subscription? What anti-spyware (other than Defender) applications? What third-party firewall (if applicable)?
A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?
You see the effects of a hijackware infection!
NB: If you had no installed anti-virus application or subscription has expired * when the machine was first infected * and/or your subscription has expired since and/or the machine is not kept fully corrected in Windows Update, don't waste your time with any of the following: Format & reinstall Windows. A repair install won't help!
Microsoft PCSafety provides users at home (only) with free assistance in dealing with infections by malicious software such as viruses, adware and spyware (including unwanted software).
https://support.Microsoft.com/OAS/default.aspx?&PRID=7552&St=1Also available via the homepage of Support of consumer safety: https://consumersecuritysupport.microsoft.com/
Otherwise...
1. see if you can download/run the MSRT tool manually: http://www.microsoft.com/security/malwareremove/default.mspx
NB: Run the FULL scan, not analysis FAST! You may need to download the MSRT on an uninfected machine and then transfer the MRT. EXE to the infected machine and rename it to SCAN. EXE before running it.
2A. WinXP-online Windows Live Safety Center scanner 'Protection' (only!) in Mode safe mode with networking, if necessary:http://onecare.live.com/site/en-us/center/howsafe.htm
2B. Vista or Win7-online this scanner instead: http://onecare.live.com/site/en-us/center/whatsnew.htm
3. now post the logs required in a forum appropriate for support by an expert in the field. DON'T SKIP THIS STEP!
I can recommend the assistance of experts available in these forums: http://spywarehammer.com/simplemachinesforum/index.php?board=10.0, http://www.spywarewarrior.com/viewforum.php?f=5, http://www.dslreports.com/forum/cleanup, http://www.bluetack.co.uk/forums/index.phpand http://aumha.net/viewforum.php?f=30
If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
Maybe you are looking for
-
Could not the 9.2.1 to 9.3 upgarde
Upgrade error "Unable to verify the update" (iOS 9.3 failure of verification because you are no longer connected to the internet). I tried to reset network connections, tried to restart the phone and nothing has worked. Please suggest other options I
-
Tonight, I tried several times installation/connection to the wireless Lexmark Professional 6600 series printer but every time the printer message said installation failed. Why? What should I do to connect to this printer? Title: original printer I
-
lost my optomiser costs, which was sent to me by microsoft to help get this pc back up and reinstall runing after infection of trogen was bad to do a complete system that is fen ilost my fee optomiser girls always in trouble could still use finnes to
-
What prevents my computer to download the last sony ericsson pc suite for the mobile c905 after uninstalling the olderversion?
-
Everything on the screen is too big
having a problem with the size of the screen can see everything on the screen, it is too big do not know how to set the size of the screen everything is too big