I get "access denied" when you try to add the component 4543BD

Similar Questions

• Impossible to uninstall Adobe Reader 8.2.6 due to error code 1606. Tried manually but get "Access denied" when you try to delete the dll files. I am the administrator.

  Microsoft Windows [Version 6.0.6002]
  Copyright (c) 2006 Microsoft Corporation.  All rights reserved.

  C:\Windows\System32>CD "C:\Program Files\Fichiers Files\Adobe\Acrobat\ActiveX"

  C:\Program Files\Fichiers Files\Adobe\Acrobat\ActiveX > del AcroIEHelper.dll
  C:\Program Files\Fichiers Files\Adobe\Acrobat\ActiveX\AcroIEHelper.dll
  Access is denied.

  C:\Program Files\Fichiers Files\Adobe\Acrobat\ActiveX >

  Hello

  ·         How do you try to uninstall Adobe reader software?

  I suggest to reinstall the Adobe reader software, then try to uninstall it again and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Also, the article below and check if that helps:

  http://kb2.Adobe.com/CPS/402/kb402867.html

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• computer laptop XP gets access denied when I try to view the computers in the workgroup

  I just buy a new desktop running windows 7, but it shows my phone on my network, when I try to 'see the workgroup computers' I get access denied, you may not...

  If I had to do a system restore would he roll back any change in the setting, I did?
  My 2 computers portable xp both appear on my network windows 7 and I can access the files on both

  Hello

  You can follow these links & check if it helps:

  Sharing files and printers with different versions of Windows

  Networking of computers running different versions of Windows

  Hope the helps of information.

• ACCESS DENIED WHEN YOU TRY TO SET THE AFFINITY OF THE PROGRAM.

  Hi people, this is my first post here. I have searched the forum for an answer but couldn't find it so please forgive me if I missed it and write the question again.

  I'm trying to get better performance from my pc. I am running a quad core C.P.F. and try to set the affinity for certain programs are not not multi thread. (PC ONLINE EVERQUEST GAME 2)
  I managed to channel some programs, but when I try to set the affinity for Everquest I comes up with an error message.  'ACCESS DENIED '.

  I found a page that had a work around, but I could not quite work on what they were saying.

  If you know an easy way to do it could you help me please.

  Thanks for your time :)

  Hi Dagenham Dave,

  You run the computer as an administrator?

  You can follow the steps indicated by the msspbm, which addresses a similar issue, please see the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a6a57cda-3f2c-48b2-ae8e-42c5965567bb

  This may interest you

  Optimize the performance of Microsoft Windows Vista

  http://support.Microsoft.com/kb/959062

  Please post if you have any questions

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7: error 5 (access denied) when you try to start the Volume Shadow Copy (VSS) service

  System: Win 7 Ultimate x 64 on a HP Pavilion DV6. My account is the user account only suitable on the laptop and an administrator account.

  When you try to do a system restore, it came with an error that the Volume Shadow Copy Service did not work, even if this error code is not relevant for the purposes of this question later, I managed to run the system restore in SafeMode to an old restore point...

  When you try to turn on VSS, I checked services.msc (which I ran as administrator) and VSS was off and on the manual. I tried clicking on start, the following error message came:

  "Windows didn't start the Volume shadow copy on the Local computer service."
  Error 5: access is denied. »

  I then switched to automatic and tried again, same error. I tried since everything I can possibly think (including the definition of back and forth between manual & auto then trying the solutions below) to get the service starts, nothing helps. The solutions tried so far:

  -net start vss high cmd - returns the same error (error 5 access is denied)
  -high vssvc.exe cmd - same
  -changed the full control permissions for me, the group admin and NETWORK SERVICE (that I had to add) to the System32 folder and vssvc.exe but no change
  -changed the permissions to full control for myself, admin and NETWORK SERVICE group (who even once, I must add) for VSS in regedit (open as administrator) still nothing
  -even tried to restart explorer.exe a high cmd and a task manager high and again made the permissions - still nothing.

  The only thing I haven't done is run a sfc scan, but tbh, I doubt that will fix anything. It also seems that VSS has been turned off for a while, as my last restore point was about 3 months ago and I installed things since.

  Any suggestions/ideas would be appreciated, because I'm going nuts with that now! Thank you!

  The Volume Shadow Copy Service must not be on auto-start.

  According to the site TechNet Microsoft VSS THAT was introduced with Windows XP SP1 and since that time it has always installed as manual start since he does not need to be started automatically and it works day and night to do nothing.  Some places say different times when VSS has been introduced, but be sure that it was a long time ago.

  A popular site to see how Windows Services should / could be put in place is here:

  http://www.blackviper.com/service-configurations/

  If you've read about VSS on Microsoft TechNet, it says:

  

  https://TechNet.Microsoft.com/en-us/library/hh125927 (v = ws.10) .aspx

  So do you think the MS TechNet site is fake and that each installation of Windows since XP has a badly installed VSS Service?  If that were the case all Windows systems in the world would be in trouble.

  On an unafflicted system if you open the services applet and observe the VSS Service, it should look like this:

  

  So if you start a backup operation or even create a Restore Point, go back to the Service applet and press F5 to refresh you'll see that the VSS Service changed its status to start:

  

  Once the operation is complete the VSS Service will stop itself (it may take a while).

  That's how it is supposed to work.

  We should certainly be able to affect the automatic VSS Service and you should be able to start, but you shouldn't need to.  People who say that "solved their problem" forgets to mention the days/weeks to try things that lead to get their system of work.  There is no way of knowing which of the dozens of things that they could have tried really solved the problem.

  You say that the system restore worked in Mode safe (but not a normal startup) and if it is true that means usually something to load in a normal trunk causing a problem and that something is usually an antivirus/antimalware application that is 'protect' your system against the changes.  When you start mode safe these things are usually not loaded this is why sometimes your system restore mode without failure.

  Contributors known for these programs are Norton, McAfee, Avast, Avira, Kaspersky and probably others.

  So what antivirus/antimalware programs you are running and have checked their support pages for known problems with backup/restore system restore?

  Norton has even a page about these issues:

  https://support.Norton.com/SP/en/us/home/current/solutions/v51118464_EndUserProfile_en_us

  Even McAfee told their product to uninstall completely before doing a system restore:

  "Intel Security recommends that you remove McAfee security products before to proceed with an upgrade of the operating system or the Microsoft System Restore and then re-install your McAfee product when the update/restore is complete. "
  

  So I assumed that whatever your AV program happens to be could be part of the issue here - but we don't know what it is.

  We know error 5 is a permissions/access denied error type, but you shouldn't make adjustments to get VSS to start if something is wrong.  If as you have tried adjustments have been necessary every Windows system in the world should also make these adjustments and coming is not past.

  Of course, now, your system might be more affected since you've been changing permissions on the things trying to VSS to start when there is probably not a problem with VSS in the first place, so who knows what condition are in now.

  You could start by uninstalling what your AV software (most manufacturers have a special program for that) and by eliminating third-party applications that are known to interfere.  You can always reinstall them again later, no?

• Built in Administrator - "access denied" when you try to install the drivers

  I have a problem with the built in Administrator account. I connect as administrator and try to install a device and the driver and get failure because of "access denied." It's probably NEVER supposed to happen because the administrator is supposed to have TOTAL control over everything. To be clear, I am NOT as a user with administrative privileges.

  The installed operating system is Windows 7 Enterprise edition and was part of a domain, but is now independent. I hope that all field controls have been removed, but these should not affect the functioning of the administrator in terms of right at all?

  Relocation is not really an option because we cannot save data - because the device driver for the external hard drive can not be installed - Access denied.

  Someone should be able to help! I'm desperate!

  Hon

  I suggest you try to disable the driver signature when starting and start installing the drivers.

  Follow the link for more information:

  http://Sabrent.com/support/knowledgebase.php?article=14

  Please use bcdedit.exe - set loadoptions DISABLE_INTEGRITY_CHECKS instead of DDISABLE_INTEGRITY_CHECKS 

• My computer says ACCESS DENIED when you try to put the values by defect of security + Itunes glitch thing? I need help?

  My computer is says ACCESS DENIED

  When I tried to do: http://support.microsoft.com/kb/313222/en-us

  This is the error I got! : (Sorry, really long).
  Monday, September 6, 2010 11:45:33
  -Configuration engine was initialized successfully.-

  -Model of reading Configuration information...

  -Rights of the user to configure...
  SeImpersonatePrivilege must be attributed to administrators. This setting is defined.
  SeImpersonatePrivilege must be assigned to the SERVICE. This setting is defined.
  Configure the S-1-5-19.
  Configure the S-1-5-20.
  Configure S-1-5-32-544.
  Configure S-1-5-32-551.
  Configure S-1-5-32-559.
  Configure S-1-5-32-545.
  Configure the S-1-1-0.
  Configure the S-1-5-6.
  Configure S-1-5-21-1141220282-763679081-1401190266-501.
  Configure S-1-5-32-555.

  User rights configuration was completed successfully.

  -Configure the group membership...
  Set up users.

  Group membership configuration was completed successfully.

  -Configure the 64-bit registry keys...
  Configure users\.default.
  Configure machine\software.
  Configure machine\software\classes.
  WARNING 5: Access is denied.
  Error security descriptor for machine\software\classes\.aa of construction.
  WARNING 5: Access is denied.
  Error security descriptor for machine\software\classes\.aax of construction.
  WARNING 5: Access is denied.
  Error security descriptor for machine\software\classes\ of construction. AMR.
  WARNING 5: Access is denied.
  Error security descriptor for machine\software\classes\.bwf of construction.
  WARNING 5: Access is denied.
  Error security descriptor for machine\software\classes\.cel of construction.
  achine\software\classes.
  WARNING 5: Access is denied.
  Error setting security on machine\software\classes.
  WARNING 5: Access is denied.
  Error setting security on machine\software\classes.
  WARNING 5: Access is denied.
  Error setting security on machine\software\classes.
  WARNING 5: Access is denied.
  Error setting security on machine\software\classes.
  WARNING 5: Access is denied.
  Error setting security on machine\software\classes.
  WARNING 5: Access is denied. (says this error ABOUT 1 000 times, I had to delete if it is not published on long!)
  Error setting security on machine\software\classes.
  WARNING 1336: Access control list (ACL) structure is not valid.
  Error setting security on machine\software\classes\Wow6432Node.

  Configuration of registry keys was completed by one or more errors.

  -Configure the 32-bit registry keys...
  Configure machine\software.
  WARNING 1336: Access control list (ACL) structure is not valid.
  Error setting security on machine\software\Licenses.

  Configuration of registry keys was completed by one or more errors.

  -Configure file security...
  Configure c:\program files\common files\speechengines\microsoft\tts.
  WARNING 2: The system cannot find the specified file.
  Error safe on c:\program files\common files\speechengines\microsoft\tts.
  Configure c:\programdata\microsoft\windows\drm.
  Configure c:\programdata\microsoft\windows\drm\cache.
  Configure c:\windows\repair\default.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\default.
  Configure c:\windows\repair\ntuser.dat.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\ntuser.dat.
  Configure c:\windows\repair\sam.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\sam.
  Configure c:\windows\repair\security.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\security.
  Configure c:\windows\repair\software.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\software.
  Configure c:\windows\repair\system.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\system.
  Configure c:\windows\system32\wbem\mof.
  Configure c:\windows\system32\windows media.
  WARNING 2: The system cannot find the specified file.
  Error on c:\windows\system32\windows media safe.
  Configure c:\windows\syswow64\export.
  WARNING 2: The system cannot find the specified file.
  Error setting security on c:\windows\syswow64\export.
  Configure c:\windows\syswow64\ias.
  Configure c:\windows\syswow64\wbem.

  File security configuration was completed successfully.

  -Set up the parameters of the General Service officer...
  Configure the sysmonlog.
  Error 1060: The specified service does not exist as an installed service.
  Error opening sysmonlog.
  Configure SamSs.
  Configure ntmssvc.
  Error 1060: The specified service does not exist as an installed service.
  Error opening ntmssvc.
  Configure netddedsdm.
  Error 1060: The specified service does not exist as an installed service.
  Error opening netddedsdm.
  Configure netdde.
  Error 1060: The specified service does not exist as an installed service.
  Error opening netdde.
  Configure dmserver.
  Error 1060: The specified service does not exist as an installed service.
  Error opening dmserver.
  Configure clipsrv.
  Error 1060: The specified service does not exist as an installed service.
  Error opening clipsrv.
  Configure the browser.

  Agent of General Service configuration was completed successfully.

  -Configure available attachment engines...

  Attachment engines configuration completed successfully.

  -Configure security policy...
  Configure password information.
  The administrator account is disabled.
  Guest account is disabled.

  Access configuration was completed successfully.
  Search anonymous LSA appoints setting: existing SD = D: (D; 0 X 800;) (A) (; xf1fff 0;) BA) (; 0 x 20801;) WD) (; 0 x 801;) (A) (a. 0x1000;) LS) (a. 0x1000;) NS) (a. 0x1000;) S-1-5-17).
  Configure the setting LSA anonymous search.
  Set up the nt\currentversion\setup\recoveryconsole\securitylevel machine.
  Set up the nt\currentversion\setup\recoveryconsole\setcommand machine.
  Set up the nt\currentversion\winlogon\cachedlogonscount machine.
  Set up the nt\currentversion\winlogon\forceunlocklogon machine.
  Set up the nt\currentversion\winlogon\passwordexpirywarning machine.
  Set up the nt\currentversion\winlogon\scremoveoption machine.
  Configure machine\software\microsoft\windows\currentversion\policies\system\dontdisplaylastusername.
  Configure machine\software\microsoft\windows\currentversion\policies\system\legalnoticecaption.
  Configure machine\software\microsoft\windows\currentversion\policies\system\legalnoticetext.
  Configure machine\software\microsoft\windows\currentversion\policies\system\scforceoption.
  Configure machine\software\microsoft\windows\currentversion\policies\system\shutdownwithoutlogon.
  Configure machine\software\microsoft\windows\currentversion\policies\system\undockwithoutlogon.
  Configure machine\software\policies\microsoft\windows\safer\codeidentifiers\authenticodeenabled.
  Configure machine\system\currentcontrolset\control\lsa\auditbaseobjects.
  Configure machine\system\currentcontrolset\control\lsa\crashonauditfail.
  Configure machine\system\currentcontrolset\control\lsa\disabledomaincreds.
  Configure machine\system\currentcontrolset\control\lsa\everyoneincludesanonymous.
  Configure machine\system\currentcontrolset\control\lsa\fipsalgorithmpolicy\enabled.
  Configure machine\system\currentcontrolset\control\lsa\forceguest.
  Configure machine\system\currentcontrolset\control\lsa\fullprivilegeauditing.
  Configure machine\system\currentcontrolset\control\lsa\limitblankpassworduse.
  Configure machine\system\currentcontrolset\control\lsa\lmcompatibilitylevel.
  Configure machine\system\currentcontrolset\control\lsa\msv1_0\ntlmminclientsec.
  Configure machine\system\currentcontrolset\control\lsa\msv1_0\ntlmminserversec.
  Configure machine\system\currentcontrolset\control\lsa\nolmhash.
  Configure machine\system\currentcontrolset\control\lsa\restrictanonymous.
  Configure machine\system\currentcontrolset\control\lsa\restrictanonymoussam.
  Configure machine\system\currentcontrolset\control\print\providers\lanman printing services\servers\addprinterdrivers.
  Configure machine\system\currentcontrolset\control\session manager\kernel\obcaseinsensitive.
  Configure machine\system\currentcontrolset\control\session manager\memory management\clearpagefileatshutdown.
  Configure machine\system\currentcontrolset\control\session manager\protectionmode.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\autodisconnect.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\enableforcedlogoff.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\enablesecuritysignature.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\nullsessionpipes.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\requiresecuritysignature.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\restrictnullsessaccess.
  Configure machine\system\currentcontrolset\services\lanmanworkstation\parameters\enableplaintextpassword.
  Configure machine\system\currentcontrolset\services\lanmanworkstation\parameters\enablesecuritysignature.
  Configure machine\system\currentcontrolset\services\lanmanworkstation\parameters\requiresecuritysignature.
  Configure machine\system\currentcontrolset\services\ldap\ldapclientintegrity.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\disablepasswordchange.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\maximumpasswordage.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\requiresignorseal.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\requirestrongkey.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\sealsecurechannel.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\signsecurechannel.

  Registry values configuration completed successfully.
  Configure the log settings.

  Configuration of the audit / log has been successfully completed.

  -Configure available attachment engines...

  Attachment engines configuration completed successfully.

  Engine - UN-initialize configuration...

  When I tried to solve this problem: http://social.answers.microsoft.com/Forums/en-US/vistasecurity/thread/9d71a399-d168-43ec-8083-673f5258d09c?ppud=4

  I can't back up my files anywhere that it says access denied :(
  

  Also, WHENEVER I open itunes windows must reconfigure and change all my default settings but my music is still there! It says itunes reconfiguration and it still load and say that is is to install itunes?

  I really need help please

  Hi mewlar101,

  You run the computer as an administrator?

  Step 1: Disable the security software; Follow the steps mentioned in the link below

  Disable antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

  Now, check if you can back up your files

  Step 2: Check with another profile for the Admin user

  If you do not have a different user account, you will need to create a (see link below). If everything works fine with a different user profile, you can infer that the user profile is damaged, click on the link to find out how to solve this problem.

  Create-a-user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  On your problem of ITunes, you can post your query on the discussion group by Apple for more specialized help

  http://discussions.Apple.com/category.jspa?categoryID=149

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Access denied when you try to edit the C: program files / drive

  I'm trying to use PHP on my computer. By following the instructions during the installation an 'access denied' pop up appears whenever I try to save changes

  Hi JlaHills,

  Make sure that you are logged as administrator and check if you are faced with the question.

  Try to take possession of a disc and check whether the problem is resolved.

  To take ownership of a drive:

  1. click on the drive that you want to take control and then click Properties.
  2. click on the Security tab, click Advanced, and then click the owner tab.
  3. click on modify.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  4. click on the name of the person you want to give to the property.
  5. If you want this person to be the owner of the files and subfolders in this folder, select the Replace owner of subcontainers and objects to check.
  6. click on OK.

  If this does not work, I suggest you to activate the administrator account built in and check if it works.

  An administrator account is a user account which allows you to make changes that will affect other users. Administrators can change security settings, install software and hardware, and access all files on the computer. Administrators can also make changes to other user accounts.

  If you are logged in as administrator, then I suggest you turn on the built in user account and check if it works.

  In Windows Vista, the built-in Administrator account is disabled by default. In previous versions of Windows, an administrator account was created automatically during Out-of-Box-Experience (OOBE) with a blank password.

  An account administrator with a blank password is a security risk. To better protect the system, the built-in Administrator account is disabled by default in all new installations and upgrades of Windows Vista.

  HOW to: Enable the build-in the administrator account in Windows Vista
  http://support.Microsoft.com/kb/555910

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Access denied when you try to edit BOOT. INI.

  I was using Norton Ghost to clone a drive for one of my clients.  The clone has failed for some reason any.  After powered my system down to remove the two discs I was working with my system turns on no longer.  I get the NTOSKRNL. EXE missing error.  I decided to take my hard drive to another computer to check the boot.ini file.  The other system is Windows 7.  I get ACCESS DENIED when I United Arab Emirates, the attrib command to reset the attributes S & H.  I have to take ownership of the file.  Can someone help me?

  Why don't put you your XP drive afflicted and fix it using the XP Recovery Console?

  The situation is usually very simple to solve without moving from your HARD drive to another computer - and how you can fix this if you didn't have another computer to move to-reinstall XP from scratch or 'try' a repair installation?   If you had any XP installation CD?  (The Uuless Ghost FUBAR had somehow your Windows installation)

  You don't have a Recovery Console CD?  Make one following the instructions on this link:

  http://www.bleepingcomputer.com/forums/topic276527.html

  If the NTOSKRNL. EXE is really missing, or even suspect, that's just replace it by using the Recovery Console.  It is in many other places on your HARD drive - just copy in a replacement and be on your way.

  If you have doubts about your boot.ini, just rename or delete (rename boot.ini.bak boot.ini).  XP doesn't have a boot.ini file to start in a general single partition configuration.  It will complain, but still boot without one if all the other pieces are in place.  Your question of the NTOSKRNL. EXE missing error is unlikely to have anything to do with the boot.ini anyway, but you can try things if you wish.

  If you want to take the right of a folder/file on a drive that has been moved to another computer, to implement this article:

  http://support.Microsoft.com/kb/308421

  I know not if attrib works the same in Windows 7, but XP, you type a command as the start, run or from a command prompt:

  attrib - shr c:\boot.ini

  It would be 'less' (remove) the attributes system, hidden and read-only.

  Here's a boot.ini file General who can help as an example, or after the content of yours, and we can take a look.

  [boot loader]

  Timeout = 5

  default = multi (0) disk (0) rdisk (0) partition (1) \WINDOWS

  [operating systems]

  "multi (0) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional "/ fastdetect / noexecute = OptIn

• Photoshop cs4 access denied when you try to install from disk in Windows 7 64 bit.

  Photoshop cs4 access denied when you try to install from disk in Windows 7 64 bit. I tried in

  safe mode and it starts to install, but get an error there as well.

  What should I do?

  So when you put the disk in it does not work properly? When the disc is inserted, you should have a window pop up with 2 options. 1. install and another to see what is on the disk. Choose to open the disc or explore. Navigate to the folder where is the photoshop CS4 .exe file (which runs the Setup program), right-click on the .exe file and choose Run as administrator and it should start. See if it will install. If this isn't the case, then read below.

  I don't know how long you got in the installation until so chances are, you will need to run the CS4 Cleanup utility. 2 levels to run but do not use 1 or 2 just type number 3.

  http://www.Adobe.com/support/contact/cs4clean.html

  You may need to run the utility windows install cleanup too

  http://support.Microsoft.com/kb/290301

  Before you try to reinstall the software make sure that adobe reader is not installed. If it is delete. It has caused problems in the past with vista and CS4 installs.

  You can also disable windows Defender and all antivirus software. You can keep UAC Windows 7.

  When installing CS4 to 90 percent, it stops almost and may take 5 to 10 minutes at the end. It's normal. What a pain huh...

  After the installation is complete, restart

  After restarting, go to the icon of CS4 64-bit or 32-bit (depends on 32-bit or 64-bit Windows 7) in the starting area, right-click on CS4 64-bit (if you have windows 7 64 bit), and then choose Properties, Compatibility tab, and then check run as administrator at the lower part. Hit apply, ok to finish.

  Now, run CS4 and run the update.

• I have 5 "MY BACKUP" folder on my drive C in 2008. How can I remove the old ones. Receiver error MSG "Access denied" when you try.

  I have 5 "MY BACKUP" folder on my drive C in 2008. How can I remove the old ones. Receiver error MSG "Access denied" when you try.

  Hi PJG_918,
   
  To resolve this problem, you must turn off Simple file sharing and then take over the folder.
   
  Here is an article that will explain the procedure to the same thing:
   
  "Access denied" error message when you try to open a folder

• How can you stopPhotoshop CC2015 access denied when you try to scan photos?

  How to stop Photoshop CC2015 of access denied when you try to scan photos? I had to resort to the application of the C6. Was able to use the CC2015 until tonight.

  Have you tried restarting your scanner and restarting your PC?

• get access denied when I try to download adobe XI

  get access denied when I try to download adobe XI

  Hello

  Please download it from the following link: https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

  Kind regards

  Shipti

• Get 800b0100 error when you try to install the update KB905866 (Mail filter spam for x 64 systems) in Vista

  Get 800b0100 error when you try to install the update KB905866 (Mail filter spam for x 64 systems). It keeps failing even though I followed the steps all the recommended (in aid) and installed some other stuff.  Tried several times but nothing helped.  I saw a recommendation to install a Wups2.dll file but do not know if I should do it because the recommendation is for Windows XP and I have Vista Home.

  Hello

  I suggest check the link below and try do a SFC (System File Checker) scan and check if it helps.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I would also say that you reset Windows update components and check if this may help.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

• My MMC crashes when you try to add the Certificates snap-in

  My MMC crashes when you try to add the Certificates snap-in

  Error: Microsoft Management Console has encountered a problem and needs to close.

  When to see the details, it shows a mfc42u.dll error.

  Hey Sankar,

  Try Mircosoft Fixit: http://support.microsoft.com/gp/slow_windows_performance

  You will need to authenticate Windows.