I get an error in Windows Experience Index
I am running windows 7 32 bit and when I run Windows Experience Index it completes the operation but it saids error in the recording of the results in the data store how can I solve this Note: I tried to type in cmd winsat formal it says the same thing
Hello
You did changes to the computer, before the show?
Method 1:
Perform a clean boot and check.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: Once you are done with the boot, follow step 7 of article to reset your computer to normal startup.
Method 2:
Delete the contents of the data store and check.
a. click Start, type %systemroot%\Performance\WinSAT\DataStore and press enter.
b. remove all except the most recent file.
Tags: Windows
Similar Questions
-
Windows experience index does not work
THE PROBLEM:
When I try to run WEI (Windows experience index) I get this error message:
"Windows Experience Index for your system could not be calculated.
Could not measure the performance of storage. The temporary file necessary to perform work
could not be placed on the drive. Unable to find a drive for the file. »Now of importance that I did to try to fix the problem, that nothing worked.
Some facts related to the reason why the error occurs:
1. my computer is a dual boot Vista and W7.
2 WEI worked perfectly when I first installed W7.
3 W7 is on B:\ drive. The Device Manager shows: System, starting, Active, dump, primary Partition
4 when I started using W7, I noticed a lot of many duplicates of files in libraries.
5. not knowing what was the role of the library, I have deleted many, if not all the files into it.
6. Accordingly, I may be wrong deleted files than WEI needs to operate.
7 there is no Winstat.exe anywhere on my computer
8. I ran SFC and he finds errors, but running WEI always produces the same error message.
Windows resource protection found corrupt files and to repair the.
Details are provided in the
CBS. Journal windir\Logs\CBS\CBS.log.
For example C:\Windows\Logs\CBS\CBS.log
9. However, strangely, it will run in the use of BACK: formal B:\Windows\system32>winsat
10. the result is:
Read 94,82 6.5 MB/s sequential 64.0 disc
Random disk reading 16.0 1.83 MB/s 4.1After the quick fix for the problem of the text in Firefox, I hope there is an easy solution to this problem.
Thanks for any help.
Brian
PA bear,
Thanks for all the help.
I decided to just leave things they way they are.
Almost everything works perfectly on my computer now.
And I learned that too much intervention can cause more problems.
To devote more time to it is not a good use of my time or yours.
I can't justify to devote more time to this.
It would be preferable for you to spent time with someone who has a real problem.
I can easily run WEI with a command prompt, it is therefore essential to set of WEI.
Thanks again.
Best regards
Brian
-
Original title: question after deployment to windows 7.
I just roll back to windows 7 Windows 10
the best thing I have ever done in my life.
.
Now when I try to run the windows experience index
I get the follow error
"The Windows experience index.
your system could not be calculated.
before, I update to windows 10I don't have this problem
so, how do I solve this problem?Hello
We appreciate your time and effort to get back to us.
As the step above did not help, I suggest you to try the steps in the link below and check if it helps:
Performance Windows ERROR index
Let us know the status of the issue. We will be more than happy to help you further.
Thank you and Merry Christmas to you also.
-
Unable to rate Windows experience index
Can someone help me fix this error?
I am trying to run Windows Experience Index, but it never ends. He gets to the assessment of HDD and fails with the following error;
"Windows Experience Index for your system could not be calculated.
Could not measure the performance of storage.
This hard drive may be spread over several physical disks. Front
Re-run the assessment drive, check that your drive is not in a software
"RAID configuration and is attributed to a single physical disk.Now, I have 3 hard drives in my machine, a 75 GB Intel SSD, which is the main OS drive, a Seagate 1 to SSHD and a 1 to Samsung HDD. The two 1 TB drives are in a RAID 0 format configuration.
What I don't understand is why Windows is trying to assess the two 1 TB disks, when they are not the main or the discs even if she says she evaluates the primary
Hello
Thank you for visiting Microsoft Community.
I suggest you to post your query on our Forums TechNet social as this question should be better there.
Please refer to the reference to the link below to send your request:
https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro
Hope this information helps.
Thank you.
Sincerely,
Ankit Rajput
-
Get blue screen errors when running Windows Experience Index.
Original title: WINDOWS EXPERIENCE INDEX FIGURE
WHEN I TRY TO VIEW MY COMPUTER CHARACTERS OF WEI, I JUST GET A BLUE SCREEN. HOWEVER, IF I CLICK ON THE VIEW AND INFO TAB PRINTING SYSTEM THAT IS JUST BELOW A SCREEN APPEARS WITH THE RELEVANT NUMBERS DOES ANYONE OUT THERE KNOW WHAT IS PAST.
I TRIED TO DISABLE THE NO OF ANTIVIRUS SOFTWARE AND FIREWALL ANTI DIFFERENCE.
I ALSO TRIED \performance\winsat\datastore c:\windows AND DELETE ALL THE XML FILES THAT DON'T WORK EITHER
HELP WOULD BE APPRECIATED THANKS
Please provide a copy of your system information file. Type system information in the search box above the Start button and press ENTER. Select file, Export and give the file a name noting where it is located. Please download your disk from sky to share with everyone and post a link here.
-
The error message also indicates: "cannot complete the assessment. The assessment or other operation did not complete successfully. This is due to an error reported from the operating system, driver or any other element. »
I did a full install new (custom) on two WD Raptors (10,00 RPM) RAID 0 (striped). All used harware succeeded in Vista Ultimate o/s is first available. Current material as follows:
Windows 7 Professional 64 bit Build 7600 v6.1.7600
EVGA nVidia nForce 780i SLI card mother ATX
Intel Core 2 Extreme QX9650 processor
8 GB (4x2Go) Patriot Extreme Performance Viper Series DDR2 PC2-6400 low latency memory twin Kit, SLI-Ready (with CL Timings of 4-4-4-12 @ 2.1V)
2 x WD 150 GB 10 K rpm 16 MB SATA NCQ in RAID 0 (striped)
Samsung 22 x DVDRW SATA Lightscribe
750TX (750 watts) Corsair power supply
2 x OC from BFG GeForce 8800GTS 512 MB GDDR3 video cards in SLI
Map its Creative SB X - Fi XtremeGamerAll PC settings are standard (ie: no overclocking component) and all windows updates are completed. Latest drivers installed for the video & sound cards. Last firmware & driver for optical drive installed also.
Any ideas as to why I can't receive a rating system for Windows Experience Index with success? Thank you
Stuart
OK, I was on the phone with support for about an hour. Problem has been resolved. Turn user account control either the lower or penultimate level. This version fixes the problem! -
Error reports and incorrect Windows Experience Index ceased to host Windows Vista process"
Title: generic original monitor pnp Oñati mobility radeon HD4330
I have inspiron1545 from dell with windows vista32 with pnp monitor generic Oñati mobility radeon HD4330 more give me stopped process to hot error also do driver update.
and give low score4.2 instead of 4.8.
I need help
Hi asdramadan,
(1) what is you receive the exact error message?
(2) when exactly you get this error message?
(3) how long have you been faced with this problem?
Method 1: Download and install the update that is available in the link below that addresses this question
An update is available to resolve a Service outage of Intelligent Transfer (BITS) background on a Windows Vista-based computer
http://support.Microsoft.com/kb/940520
Method 2: You can follow the steps described in the article below, which deals with a similar question
Reports of "Windows experience index" of Windows Vista a graphic incorrect index score on processors Intel Menlow
-
The Windows experience index error how to fix (invalid memory access settings)
I perform index windows as usual and at the end it stops giving me an error and I guess a few months ago it was working fine.
It stops when the memory test near the end gives the error: impossible to properly assess the disc. The parameter is incorrect.
If anyone knows what it means and how to fix it please REPLY
Windows 7 Edition home premium
AMD athlon 64 x 2 dual core 4600 + 2.40 ghz processcer
4g RAM
32 bit
HP PavilionHello karimer7,
Thanks for the return of the response. Please check the various points listed in the thread below. There are different options that work for some and not for others.
Please let us know status.
Thank you
James
-
experience of Windows error "windows experience index because you couldn't was calculated."
I take my laptop to cleaning and when I brought I saw the theme is windows based so I ran the windows index and screen pop up experience and he said "windows experience index because you couldn't were calculated.» Cannot not all assessments. Assessments or other operation did not completely succeed. This is because of an error generated by the operating system or other component driver. "Someone knows how to solve?so I take my laptop to cleaning and when I got it back I saw the theme is the basis of windows so I ran the windows index and screen pop up experience and he said "windows experience index because you couldn't were calculated.» Cannot not all assessments. Assessments or other operation did not completely succeed. This is because of an error generated by the operating system or other component driver. "Someone knows how to solve?Hello
I'm sorry, but we don't know how they "cleaned".
But I suggest that you go to the website of your computer manufacturer > drivers download Section > then key in your computer model number > find your operating system > find two graphics / video or from the Chipset drivers and download and install.
If the problem persists after that, I would take it back to them to fix it properly.
See you soon.
-
Windows experience Index error
How can I do this? My computer is windows 7
See:
The discussions above can give some clues.
-
Windows experience index crashes to test CPU
Hello, I tried several times to make the assessment, but when it hits the CPU fan goes crazy and then it just closes. Also I can not play video games. A similar thing happening there also. I think that my CPU may be dying, but I'm not too sure.
Hello
Thanks for posting your query on Microsoft Community forum.
I would be grateful if you can provide us with the following information to help us better understand the issue.
- Are getting you error message/code when WEI crashes?
- Did recent changes (hardware or software) on your computer?
According to the description of the problem you WEI crashes then, I suggest you to check the Windows Experience Index log file:
'% SystemRoot%\Performance\WinSAT\winsat.log'. This can give a few pertinent details.
Method 1:
(a) press the Windows key + R. Copy and paste the following text:
% systemroot%\Performance\WinSAT\DataStore.
(b) try to remove everything except the most recent file.
(c) restart the computer
(d) then try the reassessment.
Method 2:
Go to a high command prompt (run cmd.exe as administrator) and type:
WinSAT formal.
To open cmd (command prompt), follow the steps below:
(a) click on Start
(b) type cmd into the search box and right click on cmd and select run as administrator.
You can also visit the link provided below for more information on the Windows experience index.
http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-experience-index
Please get back to us with the result of the proposed suggestion and we will be happy to help you.
Thank you.
-
Recently I restore my laptop to dell factory image and after that my windows experience index becomes lower. Previously, it is 5 but it's now only 4.3.
I think that the RAM and the processor side has been reduced.Hi Murat,
Do you have Windows 7 service Pack1 after restoring the computer to the original image?
If it's just the legacy, then you should not get the low rating for Windows Exp Index.
I suggest you to see the following link:
Your computer's Windows Experience Index score may change after you install Windows Vista Service Pack 1
http://support.Microsoft.com/kb/953286
Method 1: update Windows Experience Index of Control PanelTo do this, follow these steps:
(a) click Start.
(b) right click on computer.
(c) click on Properties.
(d) click on Windows Experience Index: not class.
(e) click Refresh now.
Method 2: Update the Windows performance index at a command promptTo do this, follow these steps:
(a) click Start, type command prompt in the Search box and press ENTER.
(b) type the following command and press ENTER:
WinSAT formal
Method 3: After changing the hardware configuration of the computerTo resolve this problem after you change the hardware configuration of the computer, follow these steps:
(a) click Start
(b) type the following path in the Search box, and press ENTER:
(c) %SYSTEMROOT%\Performance\WinSat\DataStore
(d) delete all of the .xml files in the folder.
(e) follow the steps in method 1.
I suggest update you also the drivers and check.
Updated a hardware driver that is not working properly
-
I tried to rate of virtual Vista WEI... three times. All three times, the assessment completed, but I got an error message after he ended saying that WEI assessment cannot be completed. Here is what the error message says Word for Word:
_____________________________________________________________________________________________________________________________
Windows experience index...Cannot complete the assessment.
The assessment or other operation did not completely succeed. This is due to an error reported from the operating system, driver or other component.
_____________________________________________________________________________________________________________________________
These extra spaces have been in the error message - I DON'T work the SPACEBAR twice more by mistake. What should I do about it? But hey, at least I can use Windows Aero.Just checked the RAM card on the virtual machine, and it is 128 bytes. Not megabytes or kilobytes, a few bytes. I'll see if I can adjust the amount of video RAM in BIOS and see if that solves the problem.
Hello droid,.
Your question is beyond the scope of what is generally answered in these forums of consumers. I would recommend reposting in our virtualization Technet forum
-
Whenever I run Windows Experience Index to classify this PC, it blocks the PC when it hits the CPU assessment. PC won't stop or restarts, everything seems to lose the video. I have to start cold to get it back. EVGA GeForce Nvidia 8800GT card. Current drivers of Web site. AMD Phenom II 955 Black Edition x 4. New construction on PC.
Hi Tech55,
You tried to do a Scan SFC? Here's how:
1. click on Start.
2. click on all programs.
3. click on Accessories , right-click on command prompt .
4. click on run as administrator.
5. If you are prompted for an administrator password or a confirmation, type the password, or click allow or continue.
6a invites him, type sfc/scannow and press to enter. Once the scan is complete, restart the computer so that the changes take effect
For more information, please see the link here.
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Windows experience Index Crash
I can't record my system because whenever I start my pc Windows experience index rate, the pc just shuts.
I run a CPU from 3.4 Ghz 64-bit 2 GB of RAM on a GeForce 7800GTX 256 MB RAMI was able to retrieve this message from the journal of the C:\Windows\Performance\WINSAT >
582304 (0920) - winsat\logging.cpp:0815:-BEGINNING 2009\10\21 17:09:07 -
582304 (0920) - winsat\main.cpp:4301: command line = "C:\Windows\system32\winsat.exe" formal - CancelEvent b7ccfb05-d73d-468d-b4e9-3fe9ec401957
582304 (0920) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occurred
582476 (0920) - winsat\main.cpp:4474: > IsFormal is TRUE IsMoobe = FALSE.
582523 (0920) - 4585: Watch dog system active
582523 (0920) - winsat\main.cpp:4600: watch dog timer 600.0 seconds hand
582788 (0920) - winsat\main.cpp:2490: > DWM running.
582975 (0920) - winsat\main.cpp:2497: > turn off DWM.
582991 (0920) - 2470: > EMD service will be restored to the exit.
583240 (0920) - 0983: > read the active power as «8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c» mode
583240 (0920) - 2793: > power policy saved.
583521 (0920) - winsat\syspowertools.cpp:1015 >: 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c value of the power system active"
583521 (0920) - winsat\main.cpp:2814: > policy set to maximum power.
584442 (0920) - winsat\logging.cpp:1763: ERROR: phase enter/leave imballance
584442 (0920) - winsat\main.cpp:0948: > IsOfficial = TRUE IsFormal = TRUE IsMoobe = FALSE RanOverTs = FALSE RanOnbatteries = FALSE
584442 (0920) - winsat\main.cpp:1775: > Run Assessment features
584598 (0920) - winsat\main.cpp:1775: > Run Assessment d3d - aname Batch - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 300 - batchcnt c, point 10 objs - C (26) - rendertotex 6 - rtdelta 3 - texpobj c (1)
592242 (0920) - winsat\main.cpp:1775: > Run Assessment d3d - aname Alpha - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 300 - batchcnt C (75) - C (26) objs - rendertotex 6 - rtdelta 3 - texpobj c (1)
599168 (0920) - winsat\main.cpp:1775: > Run Assessment d3d - aname Tex - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 500 - batchcnt C (125) - C (20) objs - noalpha - texshader - totaltex 10 - texpobj c (4) - rendertotex 6 - rtdelta 3
606625 (0920) - winsat\main.cpp:1775: > Run Assessment d3d - aname ALU - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 500 - batchcnt C (125) - C (20) objs - noalpha - alushader - totaltex 10 - texpobj c (1) - rendertotex 6 - rtdelta 3I'm guessing it's a tweak of video card, because it seems to hang on any version of windows that I run. But I have all the updated drivers for my video card, so why it crash?
Any thoughts?Thank you.
Hi siameseboxer
Welcome to the Microsoft Answers Forum!
I recommend you:
Run the SFC (System File Checker) on the computer scan to fix system errors to the file on the computer.
To run a SFC scan, follow these steps:
Open an elevated command prompt. To do this,i. click on Start ,
II. click on all programs ,
III. click Accessories , right-click command prompt ,
IV. and then click on run as administrator.
v. If you are prompted for an administrator password or a confirmation, type the password, or click allow or continue.
VI. at the command prompt, type sfc/scannow and press to enter. Once the scan is complete, restart the computer so that the changes take effect
Below link for reference: http://support.microsoft.com/kb/936212
Thank you, and in what concerns:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Original title: DPIdefsault level I am trying to install a pc health check-up for my laptop but it says my monitor does not have the minimum required display settings and change the default DPI level. How do I do that?
-
I would like to write to a data generator circuit connected to a parallel port. Is there a driver for parallel port in labview on windows xp?
-
A security update for Windows XP Media Center Edition 2005 Update Rollup 2 X 86 Edition (KB2502898)Update of security for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2446708)Upd
-
Dell 11 7140 place - do not start after reboot and shutdown without power connected
Hi all I had problems with my new Dell 11 7140 place since I bought it. If I reboot or shutdown the Tablet without the power cable plugged in, it crashes on start/stop to a black looking screen as he stopped (but it isn't). He will sit on this State