I get an error loading C: Windows\ifapilidarexowex.dll rundll. How can I solve this problem?
I have a laptop Gateway running Windows XP Pro. When you connect to any account, I get an error loading C: Windows \ifapilidarexowex.dll rundll. I click on the OK button and the system starts and seems to work fine. It is an annoyance and should be fixed. I don't know how.
C: Windows\ifapilidarexowex.dll<-- this="" is="" a="" malware="">-->
As already mentioned by the first poster, the loading of the module above error is because the point of loading in the registry is still intact and trying to load a file that no longer exist. (A malware dll) file has been deleted either by your resident anti-virus or other scanners, but left intact registry value where the error.
What needs to be done, is either operate scanners who clean up redundant reg for example, MalwareBytes entries or other scanners or run other tools such as HijacThis and tick the corresponding section of fault start and click on the "Fix checked" button. hijackThis will then remove the redundant value and error loading stops. It is easier to use a tool, so you don't have to worry about editing the registry.
You could also disable the offending boot entry via msconfig > startup if it shows up there.
Below is an example of an error in loading a module of malware that has been deleted by the antivirus, but has not removed the corresponding registry value.
04 entry in the log from hijackthis should look like the example below.
"Error loading c:\windows\system32\ravkgmff.dll the specified module is not found."
O4 - HKLM\... \Run: [GPLv3] rundll32.exe "C:\WINDOWS\system32\ravkgmff.dll",realset"
http://free.antivirus.com/HijackThis/
Tags: Windows
Similar Questions
-
When I start my computer, I get a message saying c:windows\system32\ambrune.dell how can I solve this problem?
Original title: ken asked
-
I get ut3.ext errors while playing on server Steam. How can I solve this problem?
* original title - how can I fix errors ut3.ext *.
Hello
- He previously worked? If yes you remember to change your computer before this problem?
Method 1:
Disable the firewall and then check if it helps: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-Firewall-on-or-off
Method 2:
Start your computer in a clean boot, and then check: How to troubleshoot a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135
Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.
You can also post your questions in the epic games forum: http://forums.epicgames.com
-
When I try to erase a disc, Windows Explorer stops. How can I solve this problem?
Windows stops and restarts. It won't let me erase a disc. I had problems in other cases were shuts down Windows but can't explain what they are right now. How can I solve this problem. I am a novice when it comes to solving problems.
Try running chkdsk /f
Jerry
-
I need to solve this problem. I gues I accidentally deleted this article.
Hi richard burritt,.
1. When you receive the error message?
2. did you of recent changes on the computer?
3. do you have Lexmark printer connected to the computer?
The LXCItime.dll is the file associated with the Lexmark printer. If you receive the error message when printing using the Lexmark printer then I would suggest that you uninstall and then reinstall the Lexmark printer, check if it helps.
http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US
-
I tried windows defender (windows vista OS) activation that was turned off but there is no respondl. Instead, I get an error 0x800106ba. I hope someone can help me with this problem. Thank you.
Hi larz_ltd,
1. did you of recent changes on the computer?
2. do you have security software installed on the computer?Method 1
Check if the Windows defender service is running on the computer.
1. click on Start, type services in the start search box, and then click Services in the programs list.
2. If you are prompted for an administrator password or a confirmation, type your password or click continue.
3. double-click on the Windows Defender service and then in the box type of Startup , click Automatic.
4. click on OK.
5. make sure that the service is set to Automatic and started.Method 2
See the Microsoft article below as well as try step 4 and check if it works.
Error message when you run Windows Defender: «Error 0x800106ba»
http://support.Microsoft.com/kb/931849I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
I don't want to go to earn 10 - I've heard too many problems. I'm ready to upgrade to win 8 or 8.1 if it means I get a legitimate copy of windows
See more of Diagnostic report.
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->
Validation code: 0
Code of Validation caching online: 0xc004c4ab
Windows product key: *-* - X92GV - V7DCV-P4K27
The Windows Product Key hash: aU2z1/fnhnLHmhBm699qYZT2E6s =
Windows product ID: 00426-OEM-8992662-00400
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.1.7601.2.00010100.1.0.001
ID: {39925E49-B133-4F66-B5AD-313D699A1FC4} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Ultimate
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.151230 - 0600
TTS error:
Validation of diagnosis:
Resolution state: n/a
Given Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002
OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002
OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowed
Analysis of file data-->
[File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7600.16385], Hr = 0x800b0100
Other data-->
Office details:
{39925E49-B133-4F66-B5AD-313D699A1FC4} 1.9.0027.0 6.1.7601.2.00010100.1.0.001 x 64 *-*-*-*-P4K27 00426-OEM-8992662-00400 2 S-1-5-21-2595295314-2542787543-4225730385 Corporation Sony VGC-RT100Y American Megatrends Inc.. R0215T2 20090902000000.000000 + 000D94A3007018400F8 0409 0409 Time(GMT-08:00) Standard Pacific 0 3 HPQOEM SLIC-MPC 109 Content Spsys.log: 0 x 80070002
License data-->
Input error: can not find script file "C:\Windows\system32\slmgr.vbs '.
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: n/a
Beyond: 0 x 0000000000000000
Event time stamp: n/a
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: not registered - 0x80070005
Output beyond bitmask:
--> HWID data
Current Hash HWID: NgAAAAEAAgABAAEAAQACAAAABAABAAEA6GFeeXrS2FDET5CjxF2wENabrO + LNoiqlLsihUxY
Activation 1.0 data OEM-->
N/A
Activation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20001
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC Sony VAIO
FACP Sony VAIO
HPET Sony VAIO
MCFG Sony VAIO
SLIC SLIC-MPC HPQOEM
OEMB Sony VAIO
GSCI Sony VAIO
SSDT Sony VAIO
The date of manufacture of your system is around September 2009, which means that your system might have are preinstalled with Windows 7, but another edition such as the home edition Premium or Home Basic edition.
Check at the bottom of the laptop or in the battery compartment to confirm the version and edition of Windows which initially is preinstalled on your laptop, then the answer here with your findings.
-
My Laser Jet M1212nf MFP has always copied, but it is not working everytime I try to print or scan a document and it shows a memory error and power on the screen. I've tried switchof and unplug the printer, but the persits still problem. Can someone help me?
Just this fixed on an another 2600dn Laserjet...
Remove the affected cartridge. Look at where the chip on the cartridge hits drive at the rear of the machine. There are two triangular 'son' which hit the chip.
They must both be triggered proud of their horses. In all cases of this error that I have dealt with (I'm a reseller) an or both were pushed into the mountain and are unable to flow when the cartridge is removed.
This prevents the song currently playing.
The solution? Take them and gently pull the proud once again so that the inserted cartrdige is firmly in contact with them.
Problem solved! I hope this helps some people encounter this problem.
-
The title says it all. I can't even use run to open programs.
Hello
This should help you.
'Restore. Association of exe in Windows 7/Vista after incorrectly associating it with another program"
http://www.Winhelponline.com/blog/restore-exe-file-Asso-Windows-7-Vista-incorrectly-associated/
"When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program.
Run the Mr.Fixit here or you can use the manual method it y to correct yourself
http://support.Microsoft.com/kb/950505/en-us
And also, read information please.
'Change the programs that Windows uses by default'
http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default
See you soon.
-
Disk Cleanup doesn't work do not
Hello
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
(Try to run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup)
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html------------------------------------------
Then, check here:
Disk Cleanup stops working and does not remove the files in Windows
http://www.tips4pc.com/articles/computer%20Troubleshooting/disk_cleanup_stops_working_and_w.htmDrive serious cleanup problem in Windows caused by broken registration
http://www.Winhelponline.com/blog/serious-disk-cleanup-problem-caused-by-broken-registration/Yet an another problem of disk cleanup
http://www.Winhelponline.com/blog/yet-another-serious-disk-cleanup-issue/-----------------------------------------
Good alternative to free - CCleaner - disk cleanup
CCleaner - free
http://www.CCleaner.com/I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Whenever I try to start windows, it is said that the fake and I type in the product code and it does not. How should I do?
Windows 7 came preinstalled on your computer? If that were the case, you cannot transfer it to a new motherboard:
The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:
-OEM versions don't offer any free direct support from Microsoft technical support Microsoft
-OEM Licenses are tied to the computer first you install and activate it on
-OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard
-OEM versions does not move directly from an older Windows operating system
What is OEM software? :
http://support.Microsoft.com/GP/oemsupport_1/en-GB
Licensing FAQ:
http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx
If this is a full retail version or upgrade license, try the phone activation:
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
Why the Microsoft Shadow program could not be installed? I tried to do a system restore and not able to. I tried to update, went into Device Manager. Nothing is workin. I can have ruined Services because I tried to turn it on. Please, someone knows how can I fix?
Hi Marnie,
So if I understand correctly, you have already checked if the Volume Shadow Copy - service is on?
If not, go to 'Services' (start-> type "services.msc" in the search bar and press ENTER.)
Scroll down to "Volume Shadow Copy", double click it and check the startup type. It must be manually or automatically. If it is disabled, then change it to manual or automatic.Let us know OK? Thanks and good luck :)
Sébastien.
-
RUNDLL - error loading c:\windows\wrypap.dll - specified module cannot be found, this happens after windows xp registry
There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.It might be a removal of malicious software or an application not installed. The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it. Autoruns (see below) you get the elements no matter where it is.You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).
If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer. The msconfig program is not a Startup Manager, that's a troubleshooting tool.Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration. Just disable the display of a start-up error message should not count as a 'solution' to the problem.
If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns. The problem can always be found in the registry well.Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.Here is a link to a popular registry backup tool:You can also use the Autoruns to find the element of start remains little matter where he's hiding. Autoruns does not install anything on your computer. It will display all startup locations where the reference may be then you can turn it off or remove it completely. Here is the download link for Autoruns:Run Autoruns.exe and wait that he at the end of the filling of the list of entries.When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner. Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information. You are really interested only a few sections.The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.Scroll through the list and look for a boot entry associated files in the error message.If you can't find on the connection tab, look in any tab.You can also click file, search to search for logon, or any tab for all or part of the name of the element.Right-click on the offending entry and choose Remove. If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry. If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it. Autoruns shall display the same information however.Given that you had or have an infection, followed with this:Perform scans for malware, and then fix any problems:Download, install, update and do a full scan with these free malware detection programs:Malwarebytes (MMFA): http://malwarebytes.org/SUPERAntiSpyware: (SAS): http://www.superantispyware.com/They can be uninstalled later if you wish.Restart your computer and solve the outstanding issues. -
I am trying to install an update to iCloud on my Win 7 PC and I get an error message that there is a problem with my windows install. How can I solve this problem?
Hello grandpa_bill,
Thank you for your participation in the communities of Support from Apple.
If you get an error when you install an update to iCloud for Windows, try to download the latest version of download iCloud for Windows.
For more information, see get help using iCloud for Windows.
All the best.
-
I have an old computer running windows 98 when I try to start until you get a date checking DMI Pool error message failure boot ATAPI CD-Rom 07,08 what this mean and how can I solve this problem?
I want to erase the hard drive and use it to install windows xp.
From what I've read, it could be a number of things that went on the wall. Issue of dead hard drive, BIOS, peripheral USB plugged when starting, etc.
Does not help, but could help to point you in the right direction...
Maybe you are looking for
-
Windows 7 and compatibility Blackboard 9.0
I downloaded two Windows recommended updates today and now my Windows 7 will not be loaded Blackboard 9.0. Does anyone else have this problem.
-
I HAVE WINDOWS VISTA AND EI8 AND CANNOT LOAD FARMTOWN OR FARMVILEE ON FACEBOOK
-
Dear Sir / Madam,. I recently bought a Linksys amplifier, in order to improve my network speed. I have a lenovo tablet laptop without a cd drive, so I downloaded setup of your site (version 3), but I get an error every time after about 90%. I have an
-
New installation of Windows 7 slow to update
I recently installed a new hard drive and then installed a new copy of Windows 7 and I assumed that the required updates would begin almost immediately, but so far, after a few hours, they did not
-
Ubisoft Game Launcher has stopped working
I can't play games Assassins revelations and Assassins Creed 3 on Windows 8 because Ubisoft Game Launcher has stopped working... How to fix... ?? Thank you