I get an error 'Windows Setup is not responding' when I try to install Service Pack 2 for Windows XP.

Recovery disc to clean the computer.  Discoveries from my software was 2004 I download all 'service pack' and update to restore my computer to where it was.  SP1a downloaded but cannot download SP2.  Now it says "Windows Installer does not" and "run a DLL as an app".  How can I fix without having to pay $ 39.99 for an online business?  There must be a way to solve this problem, so I can use or re - download the "Windows Installer"

original title: used the recovery disk, downloaded SP1, but cannot download sp2 as error "the installer of windows no longer - run a DLL as an app.»  How can I fix it?

You can download the Service Pack, a complete package and install in offline mode.  Since you already SP1A, you can go to SP3 directly, bypassing the SP2.  Ingore the text on the following links which indicate that what follows is for "Professionals" and "Network Installation" and download SP3 from the following link and install it after it downloads.  You can download on another computer if you want to move to your current computer:

XP Service Pack 3:
  <>http://www.Microsoft.com/en-US/Download/details.aspx?ID=24 >

and in case you want really to Service Pack 2, look here:
   <>http://www.Microsoft.com/en-US/Download/details.aspx?ID=28 >

HTH,
JW

Tags: Windows

Similar Questions

  • Error code 800F0811 when you try to install service pack 2 for vista

    Original title: error code 800F0811 when trying to install service pack 2 for vista tried booting in minimum mode and reset my compents windows update or where he worked?

    When try to install service pack 2 for vista tried clean boot and reset my windows update components or where he worked? This two things were proposed during this same error that happened to a customer trying to download sp1

    Hello

    Review the information in the site mentioned below that can help you work with the question:

    http://support.microsoft.com/kb/947366#resolution3.

  • Server did not respond error when you try to install Service Pack 1 for Windows XP.

    I had to do a restore system with xp home edition. Trying to update from sp1 which has been downloaded to the thumb drive and sent to my office at the top of the page. starts to load, and then tells me that the server did not respond. I am connected

    You do not start with a service pack earlier and go to the top. You only download the latest service pack. The latest service pack for Windows XP Home Edition is Service Pack 3.

    Go to Windows Update and see if you can find it there.

    If this isn't the case, then you can manually download it here:

    http://www.Microsoft.com/download/en/details.aspx?ID=25129

    It is a CD image file that requires you to burn to a CD or use a virtual CD/DVD software like Virtual CloneDrive. This allows you to open the ISO file as if it was a real CD inserted into your DVD drive. All you have to do is double-click the ISO file, once you have installed this program. Run the configuration file.

    http://www.SlySoft.com/en/Virtual-CloneDrive.html

  • I get the 490 error code when I try to install service pack 2 for windows vista. Anyone have any ideas on how to solve this problem? It is very common?

    Please help me with this problem.  I know that it is very important to keep your computer up to date.

    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • I get error code 80042306 when you try to install Service Pack 1 for Vista Business

    Am linking to get my eccentric Vista to work properly. Try to get the notice of failure load and obtaining of the SP.

    alabamacoasty,

    In addition to the information requested, try these troubleshooting of beginning steps and let us know the results from them.

    System File Checker

    The system update tool

    Clean boot your PC, and then run Windows Update.

    Reset the Windows Update components

    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I get error Code 80070002 when I try to install Service Pack 1.

    Vista will not be updated to the Service Pack 1 or 2

    I have Vista and have windows automatically updates.  Of course, it is never updated with the Service Pack 1 or 2, and when I go to Windows updates, it says I have no updates available.  Recently I had trouble with my anti-virus software, and they said it was because my computer has not been updated.  I didn't know that I was not common.   However, I get error Code 80070002 when I try to install Service Pack 1, so SP2 cannot be downloaded until I get this one.  I tried everything I could find as an aid, but they were especially when people had problems years ago, when it came out.  What can I do?

    Hi kimber222,

    If these steps are not successful, the next step is and InPlace upgrade. This process is an alternative to reinstalling the operating system. During the process, some of your custom Windows settings may be lost.

    Run a repair installation will restore your current install of Windows to the version of the installtion CD/DVD. You will have to reinstall all the updates that are not included on the CD/DVD.

    Although this process should not damage files and the applications installed on your computer, it is always safe to make sure that you have a recent backup of your data and how to reinstall all software you have installed.

    Fill out the next step for the InPlace upgrade:

    1. Close all open applications.
    2. Insert the Windows Vista CD/DVD intot he computers CD/DVD drive.
    3. In the windows installation program, click install now.

    Note If Windows does not automatically detect the DVD, follow these steps:

    Click on start and type Drive: \setup.exein the box to start the search.

    Note The placeholder drive is the drive letter of the computer's DVD.

    List programs, click Setup.exe.

    In the settings window, click install now.

    1. click on connect to get the latest updates for installation (recommended).

    2. type the CD key if you are prompted to do so.

    3. Select the operating system in the "Windows Installer" page you want to update or Inplace.

    4. click Yesto accept the Microsoft software license agreement.

    5. on the which type of installation you want? of the screen, click upgrade.

    6. when the installation is complete, restart your computer.

  • Why my windows freeze and go does not respond when I try to install the msn photo on hotmail download tool?

    Why my windows freeze and go does not respond when I try to install the msn photo on hotmail download tool?

    The active x bar descends into the small window and freezes all windows open right there and will not respond. This happens when I open a new message and try to attach photos.

    Things I tried but has not made a difference:

    reinstalled IE 8, deleted the history of the browser, disk Cleanup, removed msn photo upload control, optimized IE8

    With xp media center

    PS. This occurs also at any time the information down to install an active x on any site control

    The only way to surf now with frustration is to use IE 8 NOT add optional

    So I fixed that on my own and that's how I did it.

    You must uninstall IE 8 completely which will bring you to IE 7 (in my case) and then install IE 8 via the site updates or microsoft.

    Uninstallin IE 8 by going to:

    Start--->

    Control Panel--->

    Add Remove programs--->

    Scroll down to IE 8--->

    Click on delete.

    IE8 updates must be removed also, if not then click the box 'To see the updates' on the top of the window to scroll down, look for the IE 8 security updates and delete.

    Resart your computer and install IE 8.

    This worked for me and may or may not work for you.

  • 490 error code when you try to install service pack 2 with vista

    I have service pack 1 installed on my computer but I get an error message when you try to install service pack 2

    blztcj,
    Take a look at this article and try the steps inside:
    Troubleshooting Vista Service Pack installation issues

    Post back with the results.

    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Try to install Service Pack 2 for Windows Vista and it says this "one or more system components that require the service pack are missing" need help?

    Try to install Service Pack 2 for Windows Vista and it says this "one or more system components that require the service pack are missing" need help?

    Hi, Mksethompson,

    What is your model of computer?

    Error message when you try to install Windows Vista Service Pack 2: "one or more system components that require the service pack are missing."

    http://support.Microsoft.com/kb/968279

    Dell issue

    http://en.community.Dell.com/support-forums/software-OS/f/3524/t/19278096.aspx

  • try to install Service Pack 1 for Visual Studio 2010 and I get a Code 13EC

    original title: 13EC error Code

    I am installing Service Pack 1 for Visual Studio 2010 and I get a Code 13EC wrror I don't understand why I get this and how can I reslove it?

    Uninstall .NET Framework 4.0 components, then try the installation again.

    For further assistance, please post in the following forum:
    http://social.msdn.Microsoft.com/forums/en-SG/vssetup/threads

  • Why do I get 800736B 3 error code when you try to install service pack 1 through windows update in windows 7 64 bit?

    When windows update tries to install service pack 1, it fails with the error code 800736B 3. I am running Windows 7 professional 64-bit.

    I searched around these forums and others to find a solution and I'm afraid I'll have to re - install windows.

    So far I have tried:

    1. installation of the fix/update - Windows6 analysis tool. 1-KB947821-v10 - x 64

    2. I ran sfc/scannow in the administrator command prompt

    3 run the windows update utility for troubleshooting to solve all the problems

    4 remove all content from the C:\Windows\SoftwareDistribution; When I delete these files it redownloads the update, but on installation, you get about 65% of the way through and fails.

    5 disabled and re-enabled BITS

    6 downloaded the stand-alone manual update, installation failed the part of the way by

    Here is the reading for the Checksur.log

    =================================
    Preparation of control system was updated.
    Binary version 6.1.7601.21645
    Package Version 11.0
    2011-03-29 20:20

    Checking Windows Service Packages

    Checking of manifests package and catalogs

    Checking package Watchlist

    Watchlist checking

    Checking packages

    Control components store
    (f) CSI identity missing 0 x 00000000 wnetvsc.inf_31bf3856ad364e35_6.1.7600.16385_b3131d70e92cd346 appid
    (f) CSI identity missing 0 x 00000000 ws3cap.inf_31bf3856ad364e35_6.1.7600.16385_f2bcdebb5e0570d7 appid
    (f) CSI identity missing 0 x 00000000 wstorflt.inf_31bf3856ad364e35_6.1.7600.16385_1c88e04231fe3719 appid

    Summary:
    Seconds executed: 419
    Found 3 errors
    CSI identity lack Total count: 3
    Customer experience report downloaded successfully.  Thank you for your participation.  For more information, see the Microsoft Customer Experience Improvement Program on the Microsoft web site.

    Do a repair of Windows 7 installation and then install SP1.

    Windows 7 - repair facility
    http://www.SevenForums.com/tutorials/3413-repair-install.html

  • Why do a "not a valid win 32 application error when you try to download service pack 3 for xp? How can I fix it?

    Recently, my computer crashed and had to be reloaded with XP. Kinda weird Explorer that all text is very very low. I tried to adjust the resolution and have implemented the automatic updates. I thought that installing service pack 3 could help, but I can't download. I get the Win 32 application error. Can anyone help?

    You download the SP3 on the website?

    try to get SP3 installed using Windows Update utility (start > all programs > Windows Update) and see if it will install that way.

    Hope this helps

    Response if it did not work

  • When I try to install Service pack 2, I get an error "WindowsUpdate_80070570."

    Each update else installed to succeslfully, except for the one that says "Update important" which is be Service pack 2 for x 64 system. I tried to update, and I get this error code "WindowsUpdate_80070570"

    I rebooted my computer, cleared out memory... I would really like to fix this ASAP, I bought a video game that requires I have SP2 installed, please someone help me fix this :(

    Thanks in advance :)

    hobodealer,
    Please post with the information requested here: what to post in the Windows Update forum
    Start with these troubleshooting steps and post returns with the requested info and arises from the troubleshooting.

    Run the System Update tool and then try to install SP2.
    Run System File Checker and test it.

    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • 80070057 error code when you try to install Service Pack 1

    I try to install Vista Service Pack 1 and when I try to install it either online or manually by downloading the entire 400 + M file, it will start and show 10 minutes later the installation failed with code 80070057 error and.  I can't find this code on a Microsoft Web site reference.  Any idea what's going on?

    Thank you

    A long shot, but try it (even if it's for Windows Server 2008). Stop mentioned serivce and run Service Pack 1 Setup.

  • When I try to install service pack 3 I get a message saying "Setup cannot copy the file c:\windows\system32\drivers\mrxdav.sys.

    He asks me to specify a location and also proposes to ignore this file that I don't know what to do

    Hi Lisa,

    You are able to correctly install the other updates?

    You can follow this link & check if the problem persists:

    How to troubleshoot an installation fails in Windows XP Service Pack 3?

    Hope the helps of information.

Maybe you are looking for

  • When the message is highlighted that "Fn - made?

    I was trying to hit Ctrl - has a message to highlight all of the content and instead I hit 'fn - A' and the message disappeared but I don't know if it has been deleted or hidden somewhere of what he has done exactly 'fn - A '.

  • Error of regression of the Solver

    Hello community, I want to run regression program. How do job, using the equation generated connecting with formula node eval. Then, I'll have a reference to entry value and calculate the value of output on the front. Thank you David Alexander UTM

  • drivers for my printer Hp Photosmart CNOCF3T896 or CN245-64002

    Hello I have baught a printer wireless to a friend. I want to connect using a USB cable. WIRELESS in my room. I need the drivers (software) The serial number is CNOCF3T896 The FPU is CN245-64002 Thank you for your help in emergency. I'm in trouble wi

  • Workstation T7600 die lenta

    avevo gia reported it all problema'assistenza tecnica just not it computer e stato da e dopo svariati test, mi fu detto che he pc non aveva problemi. Siamo Fanta avanti bass comunque di una ws di lavoro che può non fairs is fermi macchina o nobodies.

  • P2715Q, XPS 13, D3100 no 3840 x 2160 60 Hz, Dock

    Hi Chris, I have a similar problem. Just got my monitor DELL "nine", P2715Q. Connected my DELL XPS 13 (August 2015) and somehow, I'm not able to reach 3840 x 2160 @ 60 Hz, but only at 30 Hz. I use a D3100 DELL USB 3.0 docking station. I've updated th