I get cable insurance not pluged in (area connetion)

I'm not real savy on softwear it is a Dell inspiron 530. I'm on DIALUP. have vista 7 with a lot of usage by the previous users.  I open the browser without Add ons.

Hi George,.

1. What is the exact error message?

2. what browser you use to access the internet?

3 have there been recent changes made on the computer before the show?

I suggest you to refer to the links and check if it helps.

Network connection problems  

To troubleshoot Internet connection problems 

Wireless and wired network problems

Let us know the results. We will be happy to help you further.

Tags: Windows

Similar Questions

  • I am connected but you get the error: "not connected - connections are available.

    I am able to connect to internet with my HP dm1-3025 x netbook (running Windows 7 Home Edition Premium, SSD 240 GB, 6 GB RAM) but will have the following problems.

    • It takes a long time to connect to a wireless network
    • "I get an error message that says: not connected - connections are available.
    • The network bars appear as grey with an orange asterisk on top
    • The Assistant to "Solve problems" is not able to find problems
    • It takes a lot of time to open the "network and sharing Center." Once opened, it says 'Server execution failed '.
    • Windows Media Player and iTunes take a long time to load (approximately 2 minutes or more for each)
    It started about two or three months ago and I lived with her. I went through internet and have not been able to find a solution to this problem. Any ideas or solution would be much appreciated.

    Hello

    I suggest that you want to run system restore to the date it was working fine.

    System restore
    http://Windows.Microsoft.com/en-in/Windows7/products/features/system-restore

    Once you do the system restore, then I suggest you to download and install the updates from the Download Center. http://www.Microsoft.com/en-in/download/default.aspx

  • Upgrading from Windows XP to Windows Vista and now I can not find wifi or when I try to connect to the internet, I get an error, "a cable is not plugged on the network card.

    Wireless connections

    I upgraded my dell vostro laptop 1000 Windows xp to vista and now I can not find wifi or when I try to connect to the internet I get an error, "a cable is not plugged into the card network", "connection to the Local network. Everything worked fine until I upgraded. I noticed in my device manager, the driver for the system controller and core network are not installed. Could it be the problem? Is someone can you please help me understand this?

    Hello

    I noticed that you had created another similar to this question. Have you tried the steps suggested in this post?

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/how-do-i-put-WiFi-back-on-my-PC-after-upgrading-to/c9b90ec1-8393-4B57-b4af-2fbeb802af58

    You can also try the following methods and check if it helps.

    Method 1:

    Update a network adapter driver.

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    Method 2:

    Troubleshoot network adapter problems.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  • I get charged 2.99 twice a month for 2 applications that I had but deleted a year ago because I was doing charged each month. I'm still get charged the 2.99, applications are removed, how do stop this accusation does not happen?

    I get charged 2.99 twice a month for 2 apps I had, but was removed a year ago because I was doing charged each month. I'm still get charged the 2.99, applications are deleted then, how can I stop this accusation occur and how I get my money back?

    Deleting the application's not cancel subscriptions.

    View, change or cancel your subscription - Apple Support

  • E-mails are with incredimail, to get ok. will not go. Then the Outbox disappears altogether

    E-mails are with incredimail, to get ok. will not go. Outbox then completely disappears. I need lots of help. Please

    Hello

    Thank you for your message. It seems that there is a problem with your IncrediMail.

    Help about the software, you will need to contact help here http://www.incredimail.com/english/help/support.aspx

    Feel free to use the forum for any other issue of Windows, you may have.

  • Printer problem - after changing the cartridge, I get a message that the USB cable is not connected

    As above. I checked the USB port and it is connected.

    Original title: printer problem. After changing the cartridge, I get a message that the USB cable is not connected?

    Hello

    1. you receive an error message/code when you try to print?

    2. What is the serial number and model of the printer?
     
    Follow the steps.
     
    Method 1
    Run the hardware and devices Troubleshooter
    This utility checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.
    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Also run convenience store Print that would help us diagnose the problem better
    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

    Method 2

    (a) check the physical connection of the printer and make sure that the USB cable is properly plugged.

    (b) connect the printer to a different USB port and check if it helps.

    (c) check the on another computer.

    Method 3

    Run the fix - it tool from the link.

    Diagnose and automatically fix problems printing and printer http://support.Microsoft.com/mats/printing_problems/

    Method 4
    If the previous step fails, follow the steps described in the following link:
    Printer in Windows problems
    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
     
     
    Let us know if it helps.

  • iPhone 5 loads some cables and not with others

    My iPhone 5 stopped to load with the original cable so I started using others and have had mixed results. It will load with an iPod Touch 5 g and an Anker 6' cable. It does not load with its original cable, an iPad 2 Air cable or Anker 1' cable. A technician has replaced the battery on my iPhone 5 and during his first visit, his cable did not work and on his second visit, it worked (even cable). With all the cables that do not work, I get the message "this cable or accessory is not certified and may not work reliably with this iPhone."

    Hello, SalinasEd!

    Thank you for joining the communities Support from Apple! I know how important it is that the iPhone is charging correctly with the cables. Looks like you; ve tried a few strides in using different Chargers so far. Take a look at this article here on If your iPhone, iPad or iPod touch will not charge.

    If your device doesn't load or loads slowly

    If you have a very low battery and plug in the power, a black screen or a black screen with a red battery may appear for a few minutes. Follow these steps and try again after each:

    1. Check your charge cable and USB adapter for any signs of deterioration, * as broken or bent pins. Do not use damaged accessories.
    2. Use a power outlet wall and check for connections between your cable, USB adapter and outlet or try another outlet closed.
    3. Remove all debris from the charge on the bottom of your device socket, then firmly plug your cable to charge your device. If the port of loading is damaged, your device probably need service.
    4. Leave your unit in charge for half an hour (if your device does not respond then Learn how to do).
    5. Force restart your device: press and hold the sleep/wake and home buttons at the same time for at least 10 seconds, until you see the Apple logo. So let your device for another half hour rate.
    6. If your device will not turn on or charge, grab your camera, the charging cable and charge adapter for an Apple Store or Apple authorized service provider for assessment. You can also contact the Apple Support.

    * If you are not sure if an accessory is damaged, take it to an Apple Store or the provider of services authorized Apple for evaluation or Contact the Apple Support.

    If an alert says that your accessory is not taken care of or certified

    These alerts can appear for several reasons: your iOS device could have a port of loading dirty or damaged, your loading accessory is defective, damaged or not certified by Apple or your USB charger is not designed to load devices.

    1. Remove all debris from the charge on the bottom of your appliance socket.
    2. Restart your iOS device.
    3. Try another USB cable or charger.
    4. Make sure you have the latest version of iOS.
    5. Contact Apple to set up the servicesupport.

    If you are not able to solve the problem with these steps, it might be better to contact Apple directly by clicking on Contact the Apple Support to find the best way to solve the problem.

    See you soon!

  • G50 network cable is not properly plugged in

    I'm desperately need guidance. I have a 10 g50 of Windows running. I don't know much about computers and have traveled for two days forums and can not solve my problem. My computer does not connect to my wireless network. He has worked for the last week and then one day stopped working. I ran to help and he says two things:

    None of the networks you are connected before are in the range

    A network cable is not plugged in correctly or may be broken.

    Now my iPhone and Kindle work perfectly well with the wifi and the router is filled with operation. All my network connections are enabled and I rebooted, removed the battery and left unplugged or thirty minutes (it worked for about 5-10 minutes of glorious Internet before a failure even once).

    I have a knowledge of computers and need for education, please help!

    Hello

    Your Realtek driver is good, but try to upgrade the driver for your connection Wi - Fi, get the driver from here:http://support.lenovo.com/gb/en/downloads/ds103686

    This is the version 18.11.0.8 dated 22/06/2015.

    After you download the driver, go to the Device Manager, right-click on the AC3160, go to properties, uninstall the current driver, don't restart, install the driver downloaded. HTH.

  • When I try to print on a printer connected to my win7 I get code "printer not responding" 105-100003

    How to fix error code 105-100003

    I am running windows7 on my host network and vista on the other computer. I am able to connect to the correct internet on vista computer, but when I try to print on a printer connected to my win7 I get code "printer not responding" 105-100003. I printed before and I have not changed or added to any software since. Both computers are desktop computers and connected by ethernet cable. I have run diagnostics and checked all cables. I have a modem 2 son I had about 2 months.

    Hi, Jimmy.

    Make the printer and model would be useful.  Thank you.

    Try the following:

    If your printer is connected via a wireless network:

    1. Make sure that your printer is turned on. (Start button / stop is turned on).
    2. Make sure that the blue LED of Wi - Fi on the front of the printer is on and stays on.
    3. When the blue LED on Wi - Fi from your printer stays on (not flashing):
      • If the error ' printer does not "occurred while you have been setting up the printer:
        1. Open Software Center.
        2. Select the tools of the printer, and then select Printer Setup Utility (under Tools).
        3. Follow the on-screen instructions to set up the printer.
        4. Try to use the printer again.
      • If the error occurred after you completed the roll-out of your printer from Home Center Software:
        1. Make sure that the print queue is online.
        2. From your computer, click Start > settings > printers and faxes (or start > printers and faxes).
        3. Click on your printer.
        4. In the printer menu, make sure that use printer offline is not checked.
          NOTE: These steps may vary depending on your operating system.
        5. Try to use the printer again.

    If the error persists:

    1. Remove the printer from your computer.

      1. Select start > settings > printers and faxes.
      2. Right click on your printer, then click on remove.
    2. If your computer is WINDOWS VISTA or WINDOWS 7 OS, turn user account control.
      1. Select start > Control Panel.
      2. Double-click user accounts.
      3. Click turn user account control on or turn it off.
      4. Select the check box use user account control.
      5. Click OK.
    3. Configure the printer again.
      1. Go to start > programs > Kodak > Kodak Printer Setup Utility.
      2. Follow the on-screen instructions to set up your printer.
    4. Try to use the printer again.

    If the error persists:

    1. If you have updated to the Home Center Software v6.x or greater, disable the Hello Service.

      1. Select start > run.
      2. Type services.msc in the box, and then click OK.
      3. Locate and right click on the Hello Service and select Properties.
      4. Since the "Startup type:" drop-down list, select Disable.
      5. Click OK.
      6. Locate and right click on the network AiO Kodak Discovery Service, then select restart.
    2. If you configure your printer, run the KODAK printer setup utility.
      1. Select start > programs > Kodak > KODAK Printer Setup Utility.
      2. Follow the on-screen instructions to set up your printer.
    3. Select the Hello Service.
      1. Select start > run.
      2. Type services.msc in the box, and then click OK.
      3. Locate and right click on the Hello Service and select Properties.
      4. Since the "Startup type:" drop-down list, select automatic.
      5. Click OK.
    4. Try printing from the center of renovation again.

    If the error persists:

    1. Make sure that any firewall software blocking the required services and that it does not block the firewall of the router. See cannot use a wireless printer to computer on the same network with firewall security program.

    NOTE: If you use BitDefender Total Security 2010, the problem can be solved by turning on the game mode in the firewall. If it does not turn on the game mode, temporarily disable the firewall to enable wireless printing.
  • Make sure your computer is not connected to a virtual private network (VPN) or wireless home another network of safe working when you use the printer on your network. See using printer with the virtual private network (VPN).
  • Check that your printer is not connected to the network trouble with the same name (routers with the same default SSID in your area). It is common for users to keep the value by default, out-of-box, SSID as the manufacturer provides (for example the linksys). If your router still has the default SSID, change the SSID under a new name specific to your router.
  • NOTE: updated to the latest version of the firmware of the printer and the software when prompted will help you have the most reliable connection possible. Go to www.kodak.com/go/aiodownloads.

    If the error persists, contact us.

    http://support.en.kodak.com/app/answers/detail/A_ID/36674/selected/true

  • First timer, 6 year, iMac, 10.8.6 w/4 GB Dungeon get a browser not support Gmail and our Netflix account home page extended graphics. Do we need a type of update or new machine?

    First timer, 6 year, iMac, 10.8.6 w/4 GB Dungeon get a browser not support Gmail and our Netflix account home page extended graphics. Do we need a type of update or new machine? We are novice and probably most bought when receive this machine. Help or direction would be appreciated.

    Safari on OSx! 0.6.8 Snow Leopard is now not supported on many sites.  If your Mac can support it, you can update a newer operating system, which will have a new version of Safari.

    Go to the Apple Menu-> about this Mac and tell us what Mac model you have so we can give you options.

  • When I connect the USB and LAN cable does not my trackpad

    Hey guys how are you.

    When I connect the USB and LAN cable does not my trackpad

    How can I fix this error. Please teach me.

    Which macbook model do you have?

    a USB mouse still works?

    your keyboard still works?

    No matter which USB port you use?

    No matter what USB device allows you to create this error?

  • SH68-c68-S cables and SHC68-c68-S are interchangeable?

    The SH68-C68-S cable is specified for the UMI-7764 interfaces and the SHC68-C68-S is specified for the UMI-7774, but these cables are both compatible with the UMI-7774?

    Thank you.

    Hello

    Although the cables do not seem to be very similar, it is not recommended to use these interchangeable cables. The main difference is in the internal wiring. The SH68 cable is also used for the DAQ cards and have a common ground, which can create problems with the maps of cable movement. The following knowledge base articles provide more information and specifications.

    [1] What cable does with my gear OR Motion?

    can [2] I use a cable movement with a M Series DAQ card?

    Kind regards

    Huntington

  • A network cable is not plugged in correctly or may be broken - Y560

    Good morning guys!

    The issue now is to get my control.

    OS: Win 7 64 bit

    I see my network with red evil icon mark in the system tray... It is said no connection is available. But it's everywhere that I go, that he is saying the same thing.

    I guess the problem is with the network card does not.

     
    

    in devmgmt, I don't see any problems. Here, everything seems perfect. Get shot of evil he says:

    a network cable is not plugged in correctly or may be broken

    But the thing is I only connect through wireless... I connect like that.

    I have to update the latest version of the driver but no use.

    Could you help me!

    It is resolved.

    It has been disabled in the BIOS

    I spoke with 4 guys in here n Lenovo call center one of them might crack!

  • A network cable is not plugged in correctly or may be broken?

    My internet works fine sometimes but then sometimes it doesn't. And when I troubleshoot it say "a network cable is not plugged in correctly or may be broken. No idea what's wrong? Also all my other devices are fine, that only this laptop seems to have this disorder

    What is the make and model of your router?

    The problem occurs when you are in the same room as your router... or when there are several rooms by far?

    Problem could be caused by interference with wireless networks your neighbor's wireless.

    If you are comfortable setting in your router Wireless Setup, sign up for your router and change the channel. Use channels 1, 6 or 11.

    If you are looking for this word: inssider
    you will find a site that offers a free utility (inSSIDer for home) that can be installed on your computer in Windows 7 (there is also a version for Android... If you have an Android mobile phone.) With inSSIDer, you can see a graphical representation of all the signals of wireless networks in your location (that is, to the location of the device that is running inSSIDer) and which channel they use. You will see your wireless network (its force and channel), and if there are other nearby wireless networks on the same channel (and what are their strengths).

    inSSIDer can help you to choose a channel that has the least number of other wireless networks. But if you do want to use it, you can simply configure your router to use a different channel (different than he's using now) and see if that helps. You need not what whether for your laptop... just change the channel number of your router's wireless network.

    If you are able to change your router's wireless channel, then first of all sit in the same room as your router (as close to him as possible) and see if the problem occurs. Even if you encounter interference from your neighbor's wireless networks, when you are sitting next to your router... its signal should be strong enough to overcome any interference. So, if the problem still occurs when you're sitting next to the router, then change them channels most likely will not help (but if the problem goes away when you're sitting next to the router, then change them channels could help).

    Another thing to try is using your laptop on a wireless network (network of a friend, a public network, etc.). If the problem occurs when you use another network (and more sitting next to the router as you can), then change the channel will probably not help (but if problem disappears, could help to change the channel).

    There are a few other settings, you can try on your router, but first try the suggestions above to see if they help.

  • cell data cable is not recognized

    Trying to download pictures from my cell phone (Sam-sung Gravity 3), but my data cable is not recognized by my table.

    Hello

    1. the other USB devices work properly?

    2. what version of Windows is installed on the computer?

    If other USB devices are working properly, then I suggest you to contact Samsung for more support.

    Otherwise, try this troubleshooting and check if it helps:

    For Windows7:
    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    For Windows vista, try this fixit:
    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

    It will be useful.

Maybe you are looking for

  • Did you notice a delay when the stream to multiple airplay devices?

    I've used a wireless Airport Extreme with Apple TV and 1 or even 2 Airport Express to music streaming at 1-3 stereo systems simultaneously always without delay. Now, using only an AEx and ATV there is an echo of the notice. The system does not wait f

  • Restore CD for XP in combination with double HDD on Satellite Pro P300

    On my Satellite Pro P300, there are two hard drives, two 160 GB.Currently, Windows Vista Professional is installed, as it was preinstalled.On the first disc, there are 3 partitions, an EISA partition, a partition to boot Vista and a partition for HHD

  • Pavilion p6756sc. LN797EA #UUW: Windows 10 Format

    I have a very slowly from HP desktop with win 7 home premium installed from the C drive. Now, I have installed the free win 10 of the microsoft home page. My question is: is it possible to format the C drive and reinstall win 10 without any problem a

  • My computer restarts when the awakening of suspension

    It's a mobile Athlon 64 with Windows XP (32 bit) and SP3.When I press the suspension button or select suspension in the stop menu, it suspends its light flashing and all. Problem is: when I move the mouse or press a key any wakes up, it starts window

  • Problem with partition hard drive!

    HelloHere's my problem:I want to partition my 250 GB HD. It has 120 GB of free and I have a 30 GB partition, normally, it does not appear to be a problem and if... In disk management, right click on "reduce" and Windows tells me: 'space available out