I get device not found DPW on win XP for sony ericsson usb drivers

I try to use my phone sonyericsson on my win xp pc and I get device not found MTP error message, even though I have mini usb as well as drrivers in my memory supplied with mobile phone card.

Hello

1. What is the model number for the phone?
2. were you able to connect the phone to the computer with no problems before?

Step 1: Try to run the fix it tool to the article below and check.
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/

Step 2: Check if the problem persists in the clean boot state.
Reference: http://support.microsoft.com/kb/310353

See also:
Advanced troubleshooting tips for General USB for Windows XP problems
http://support.Microsoft.com/kb/310575

Tags: Windows

Similar Questions

  • Device not found in airport 6.3.6 utility

    Running a 5th generation I'm stuck. I checked a bunch of other posts and restarted all devices, as well as reset the base station. I also adjusted IPv6 at the local level.

    When I pull up the Airport utility, I get "device not found" and cannot connect to the base station to adjust settings. What is weird is I can get temporarily in Airport utility if restart my MacBook and the base station at the same time. However, it does not last long. I also see the drive mounted in the Finder all the time. A Wi - fi connection works without interruption.

    I tried this on 2 Macbooks, an ipad and an iphone. El Capitan running. I am at a loss.

    Someone at - he was able to solve this problem.

    You are one of the many ad today with this problem.

    for example. There is only one thread.

    Time capsule not recognized in the utility of the AP

    I suggest that you can still access the AE or TC using configure others and type the IP address.

    A 5th generation is the flat and quite old but more reliable than Gen6. But beyond 5 years they get flakey.

    If you mean a 5th Gen TC then this is the newest one.

    I am surprised, he's also missing on the iOS but who was more reliable version of airport utility.

  • Bluetooth Peripheral Device not found Driver for win 7 32 bit Hp laptop, G62

    Trying to connect a peripheral device such as a mobile phone or tablet, it becomes discovered by the laptop but system (win 7 32 bits) says he needs troubleshooting.

    To troubleshoot, the system attempts to update the driver one finally says:

    "Bluetooth Peripheral Device not found Driver"

    What is the solution?

    Please try this:

    To work around this problem, follow these steps:

    1. Open the Microsoft Management Console (MMC) Services snap-in. To do this in Windows Vista/W7, click Start typeservices.msc in the box to start the search , and then click Services in the list of programs .
      If you are prompted for an administrator password or a confirmation, type the password, or click continue.
      To open the snap-in Microsoft Management Console (MMC) for Services in Windows XP, click Start, click run, typeservices.msc, and then click OK.
    2. Double-click the Bluetooth Support service.
    3. If the Bluetooth Support service is stopped, click Start.
    4. In the list of Startup type , click Automatic.
    5. Click the log .
    6. Click Local System account.
    7. Click OK.
    8. If you are prompted to restart the computer, click Yes.
  • When I try and send a file to my laptop I get this error: "bluetooth device not found please make sure that your bluetooth device is propably connected and turned on."

    original title: BLUETOOTH PROBLEM Please HELP!

    When I try to send a file from my computer to my cell phone an error message appears saying "bluetooth device not found".

    Make sure that your bluetooth device is propably connected and turned on. »

    In addition, the mobile is unable to send any file to computer th.

    I've already matched the mobile with the computer and I use windows 7 please help.


     

    When I try to send a file from my computer to my cell phone an error message appears saying "bluetooth device not found".

    Make sure that your bluetooth device is propably connected and turned on. »

    In addition, the mobile is unable to send any file to computer th.

    I've already matched the mobile with the computer and I use windows 7 please help.


    Hey xtheultimatethinkerx

    Here is the vista forums

    Try the repost in Forum windows 7 the link below

    http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

    Answers by topic

    Walter, the time zone traveller

  • 3480CT, device not found driver Portege

    I have a problem,
    I have a laptop toshiba portege 3480CT and is not an operating system. I am trying to install win98 SE, but when it starts to install this message appears:
    device not found driver: "OEMCD001."
    Invalid device CDROM drivers selected

    : so, how can I get these drivers, the computer has only CD-ROM drive, FLOPPY No.. CDrom drive is a pcmcia drive.
    Please help me!
    :)
    I also tried to install XP pro but with bad results, it gives errors when it tries to start the windows installation...

    WHAT to do, any help much appreciated!
    Thank you

    Hello

    If you have installed WIN 98SE on the device you need Toshiba drivers and utilities.
    Win 98SE OS you install all the applications in the following order:

    Display drivers for Windows 95 (for S3M7 Savage MX/IX) V4.11.01.7006 - 7.02.88 - 01
    YAMAHA AC - XG Audio Driver for Windows 95/98SE V.4.07.1011
    Floppy disk Win98 companion W98C09
    Logitech MouseWare for Windows 95/98 V8.37 BLD246
    V5.77 - MR577ALL004 modem driver
    Driver for TEAC V.1.06t (FDD Version 1.08 t) USB floppy drive
    Driver drive disk USB for YE - DATA V.4.30 Beta
    Panning of Driver Support (panning.sys) V3.0 (included in the display driver)
    Multi Media Port Replicator IDE Driver V.1.1.2.0315 with the file catalog
    Driver NDIS for V.2.21 de MSIR3.0 (driver Win98 OBOE)
    Toshiba Fast Ether LAN adapter (Intel 82559) V.2.01
    HALLOC. EXE (included in the Toshiba utility) V2.0
    Toshiba W983480US utility
    PCMCIA. INF for Windows98SE (support ToPIC100) V1.0
    QFE Win98Gold/Win98SE QFE KB:Q239697
    QFE Shutdown QFE Q242934
    QFE DiskTsd.VXD V.4.10.2223 Q246387xx8
    NDIS QFE Q243199 QFE
    QFE Win98SE USB QFE Q241084
    Direct X 7.0
    Acrobat Reader
    The users manual PDF file
    File PDF Manuel Modem internal
    Multi Media Port Replicator manual PDF file
    Toshiba wallpaper
    MS URL security update

    For Windows 2000 / XP in this order:

    Display driver
    TVALD
    TOSHIBA Power 2 extensions
    Toshiba Utilities
    Toshiba Mobile Extensions
    Energy saving of Toshiba Display Driver
    Toshiba infrared driver
    Toshiba IDE driver
    Acrobat Reader 4.05
    Operating instructions online
    Online modem manual
    Online manual users to multimedia Port Replicator
    Audio driver
    Driver Modem
    Country select utility (included with driver modem)
    Copy Toshiba wallpaper in c:\winnt
    Apply Service Pack 1 for the system
    Activate "Show the components of the" unplug or eject hardware trayicon
    Reinstall the display driver to support the new graphik S3 chip

    All the drivers you can find on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com/
    Please let me know if it has been successfully

    Best regards

  • Pavilion DV7 6c50eb: Boot Device not found

    Hi all

    I just change the HD of my laptop and after booting with the Win 7 DVD and install the operating system, I get this screen "Boot Device" not found.

    I am able to boot with the DVD, but I can't the normal HD boot.

    This is a new HD, it's all clean and working, I re-install after the first failure but still the same issue.

    Please let me know your thoughts

    Thank you very much

    FX

    I change the port on the motherboard, everythings works now... I believe that the port was not active and I have found no opportunity to change the option in the bios... duration of the other port have solved the problem.

    See you soon

  • Airport devices not found

    Hello! I have two devices from the airport: on the one hand at home and a time in my lab Capsule. I was away for 20 days and yesterday, when I came back, there was a problem with the two: my Mac cannot access these devices, they can connect to wifi networks hosted by them. When I try to access these devices via Airport utility, I get the error message "device not found". This message, both at home and in the laboratory, tells me that the device was part of my network before, and that I should check if it is within its range. There is an option to 'forget the device' in the end. It is quite strange, as other Mac networking for my laboratory do their backups normally during my absence. Could you please help me? Thank you.

    This was reported once many here recently.

    A 'solution' refers to those who have set up their base stations for Back to My Mac. If you did, how to follow recommended action is temporarily remove or disable this option, as follows:

    • Run the AirPort Utility.
    • Select the base and then station, select change.
      • Note: You may need to use the option "configure others...". "to access the base station. Enter the IP address of the base station, the default value is: 10.0.1.1 and base station administrator password when you are prompted.
    • On the tab of the Base Station, go back to the section of my Mac at the bottom of the window.
    • If you have entries here, select it and click then the minus sign "-" button to remove it.
    • Click on update and allow the base station restart.
  • Performance of Time Capsule and "device not found".

    I am now on my 2nd TC average weeks because I thought the first was broken-, but I get the same questions on the second >

    1. A Wi - fi connection is very intermittent.  Seat 3 feet of the TC, I can get 450Mbps on my iPhone 6 and 5 minutes later her stockings to 2Mbps or less (measured on the Wi - Fi Sweetspot app).  Similarly, the speed of connection internet test ranging from 20-30Mbps until 0.3Mbps not it depending on the strength of the wifi.
    2. Air utility sometimes connection works and see the TC.  But often it is not.  First he asks the password, maybe 2 or 3 times.  Can I get a yellow triangle showing on utility AP with "Device not found" and the only option is to Forget.  The TC IS still there, but since I use it for ethernet and wifi internet access still works because I am always online.

    So, what speeds SHOULD I get the Wi - Fi, 3 feet of the TC - I would have thought higher?

    Why WiFi speed decreases considerably, sometimes in the same place?

    Why the Airport utility is not the device, when it is still there?

    Is this a general problem with TCs?  Is this another duff, one back?

    Thank you

    Update you the firmware to 7.7.7 in the TC?

    If all tests performed 7.7.7 then downgrade the firmware to 7.7.3 as he could work much better.

    If it still fails I just return it.

    They seem to vary a lot in quality of construction. Some work OK but many have problems... and when you Exchange to the same store you get another from the same lot.

    There are a lot of articles on wireless diagnosis.

    for example, from your Mac.

    Use Wireless Diagnostics helps you troubleshoot Wi - Fi on your Mac - Apple Support

    Follow the wireless in a few days... and use ethernet if possible... Wireless is never a reliable substitute for ethernet.

    iOS

    If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network

    A lot of wireless issues with each new version of iOS... he could so your phone that is the problem, not only the TC.

    https://www.YouTube.com/watch?v=j4qgH8uyOk0

    You should check how wireless is around you and the intensity of the signal of all devices.

    I also need to know the exact of the TC configuration and your network if you want to find the problem. Although problems with the Wi - Fi in the TC would be not at all unusual.

  • Portege R600: SIM inserted but error: "device not found".

    Hello

    Portege R600 under XP.
    Put a SIM card in the slot, but I get the error above: Wireless Manager Toshiba "device not found".

    Cannot find the configuration options or anything like that in the manual.
    Can someone point me in the direction of literature?

    Thank you very much!

    Evan

    Hello

    Here you can download the latest version of 3G driver and tool:
    http://APS2.toshiba-tro.de/WLAN/?page=3gdownloads

    Here you will find a knowledge base on the topic of G 3:
    http://APS2.toshiba-tro.de/WLAN/?page=3ghowto

    and here you can find a HowTo create + how to create a Dial-Up connection with 3 +.
    http://APS2.toshiba-tro.de/KB0/HTD9802OF0000R01.htm

    Hope this helps

  • Office jet 4500 G510-g, the imaging device not found

    I have an Officejet 4500 with a wired Ethernet connection. For some reason any, that my computer has ceased to be able to scan from it, I can still print and everything very well. I don't remember to make changes to the system and other computers on the network can always analyze without any problem. I restarted my computer, unplug the printer, uninstalled and reinstalled the software, active windows firewall settings and cannot find any reason why it won't work. I am running Windows 7 64-bit on the computer that does not work, the other computers on my network that still work are running windows 7 64 bit and XP. On the "HP Imaging device not found" error message that opens under more information, I get this: 8 [(1, 0,-2147221496)]

    I've lived the HPSDU and he said: there is a problem with the driver and he cannot communicate with the product. He said also it is impossible to scan with windows WIA, and finally it's the Twain component may be damaged. I have uninstalled, reinstalled, re-downloaded the Installer off the HP site several times, but can not solve this problem. Help, please.

    Hi crakerb,

    When you click on the plus sign on the error message is that all of the information it provides?

    Because you can not install the printer using the USB connection, it seems to have some problems with the operating system on this computer. Did you back up your data and perform a full system recovery?

  • laptop HP pavilion touch 14: replaced defective hard drive with pre installed OS on new HDD - device not found Boot (3F0)

    Hey guys,.

    I have a pc hp pavilion touch laptop 14, which has been having a defective hard disk that the operating system was not start and the system test indicated that the hard drive contained errors.

    I replaced the hard drive with a new one and before installing the hard drive I formatted with a win installation 8.1. I thought the laptop would just start normally to win8, but gave me a screen saying:

    boot device not found please install an operating system on drive hard drive (3f0)

    The hard drive is new and I did not not how its gives me this error!

    In addition, this laptop does not seem to boot from a cd to format!

    Any ideas?

    Thank you
    Karl

    Hey BHK6,

    I found out what was wrong! It was so simple!

    I just need to make the boot inherited from the bios, like that he started directly from the hard drive and does not need of any software pre installed HP to start.

    Thanks for your help anyway

    Karl

  • 15 - p030nr: Boot Device not found

    Need help on how to fix a problem where it says "boot device not found." He worked to find one day and the next time I turned on the computer, she appeared with this error message. After reading some things, it seems that it is a right of common mistake around the 1 year mark, but I don't know which is correct. Are there methods I could do to fix this problem.

    OK, if it was an old PC, my guess would be that the hard drive is a failure, but on a PC old of a few months, it is unlikely.

    However, it would be interesting to follow these instructions to check the hard drive:

    Presume withdraw OK, what might work is booting from CD or USB and running CHKDSK to see if this helps to repair the file system.

    CHKDSK is the short name of a utility that provides MS that will do a check of the file system and attempt to repair problems.  A damaged file system may prevent your computer to start correctly and get to a Windows desktop.

    Because you can not boot from your PC, then you need to download one of the following options and follow the instructions it contains to make a bootable USB stick or a CD:
    (1) miniTool Partition Wizard
    (2) EASEUS Partition Master
    (3) assistant Partition AOEMI

    Once the media, boot from it and use the option to check the disk.

    Good luck

    I'm a volunteer and I do not work for, or represent, HP.
    ========================================================================
    If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

    If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

  • device not found Boot, hard disk does not exist... does that mean my computer is dead?

    Suspecting that Im in a world of pain here. I tried to turn on my computer and it says "boot device not found" - performed in test failed... when I hit F4 and test drive, he said "there is no hard drive. The test of memory passes, but under the boot device not found says blue "Please install an operating system on your hard drive"... and to make matters worse he makes funny sounds when he tries to start.

    Is there no hope at all that this computer working again? Is there a chance that everything I had on my hard drive can be recovered?

    You are the very welcome, Jonathan.

    dv5 is still not enough information to provide me with the service manual (in which case there is differerent for different dv5 models).

    But here is the link to the service manual I've pulled at random.

    http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c01550108/c01550108.PDF

    Guess it's safe to say that all dv5 models come with the laptop SATA drives.

    So, if you want to spring for $15, you can get this place that apparently has very good reviews.

    http://www.Newegg.com/product/product.aspx?item=N82E16817182138

    From what you describe (noise and other things), I would say that you don't have much chance of recovering the data, but it's up to you if you want to try the speaker or not.

    Here's what I recommend:

    Pull the hard drive and turn on the laptop.

    If the weird noise you heard has disappeared, then you can pretty much assume that the disc was the cause and replacing the disk and reinstalling the operating system will solve the problem.

    If the noise is still there, while there could be another problem, and it might be risky to throw good money after bad.

    Paul

  • Graphics device not found

    I get a critical error message when I try to play games on my computer, it says Graphic Device not found. I have Windows Vista Hoe Edition 64 bit premium on my computer. How can I find the graphics card or driver to reinstall to make this work?

    Intel (R) 82868G GRAPHICS CONTROLLER (MICROSOFT CORPORATION-XDDM) that's all I can find on the graphics on my computer, if this is correct how to operate to play games?

    Hello

    • What games you try to play?
    • You see a yellow exclamation next to the graphics card in the Device Manager?
    • What were the changes made before the show?
    • How long have you been faced with this problem?

    How to open Device Manager

    http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

    You can try the following methods:

    Method 1:

    You can try to update the latest drivers

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Method 2:

    Open the hardware and devices Troubleshooter

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  • Error message is Boot Device not found, Hard - Disk (3F0)

    Hello!

    I have PC HP Pavilion dv6 with operativ system windows vista Entertaiment. I got an error as Boot Device not found. Please install an operating system on your hard drive. Disk-hard (3F0) Recovery does not work and received the error 100a

    Please help me

    Kamal

    It seems that the hard drive has failed and needs to be replaced. Laptop SATA hard detail can be used. Just be sure to get a quality at least equal the original in order to use recovery disks. It may be big, but not small ability more. For example if you have a 320GB hard drive you can use a 500 GB hard drive but not a hard drive of 250 GB.

Maybe you are looking for