I get error: "the file or the C:\$Secure directory is corrupted and unreadable" after running chkdsk.

Similar Questions

• Windows 7, Sysprep after getting an error "the file or directory is corrupted and unreadable."

  When I run Sysprep on this Dell Latitude E6520 with Windows 7 (x 64) professional, then boot into Windows PE to create a picture, he said "the file or directory is corrupted and unreadable."

  I made sure to restart 3 times before I ran sysprep this time because this is the 2nd time I got the error above.  Every time it reboots normally and the question obviously didn't happen until I ran sysprep.
  The last time I had to delete the partition and re - format and start over. Fortunately I took a picture of this time right front of sysprep.
  I even tried the Windows 7 installation disc to repair the MBR and the boot record, but he said he couldn't fix it, and he can't read this partition at all.
  I thought also it could be a bad drive on this computer brand new, but I ran the diagnostics on the hard drive and there are no errors.

  Because of the scope of your question, which is a professional information technology associate, its best that you publish in TechNet IT Pro forums to receive the best support for your question:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

• All Applications have 0xc0000006 error, I can't update or run anything else and the system restore is unable to work because of error 0 x 80070570 (file or directory is corrupted and unreadable).

  I have a very new computer with Windows 7 Professional, and two weeks ago, he had a critical update.  Since then, McAfee has had problems.  I corrected McAfee, but yesterday, when I turned on the computer, I received a message that my windows is not genuine.  I accidentally clicked Ignore (or activate later) button instead of the activation button.  Now none of the software or applications to work and I can't get the computer to any previous dates because of the message: file or directory is corrupted and unreadable 0 x 80070570.

  I checked today and my Windows 7 is genuine.

  Many updates Microsoft Office cannot run also, since that time.

  How I fixed the 0 x error 80070570 and requests 0xc0000006 error?

  How I fixed the 0 x error 80070570 and requests 0xc0000006 error?

  Buy a new HARD drive . Your HARD drive is dying:

  //
  MessageId: STATUS_IN_PAGE_ERROR
  //
  MessageText:
  //
  The instruction at 0 x %p memory referenced to 0 x % the required data has not been placed in memory due to a State of error / 0 x %x.
  //
  #define STATUS_IN_PAGE_ERROR ((NTSTATUS)0xC0000006 L)

  Windows cannot read data from the HARD drive, that's why you got the errors.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• received error 0 x 80070570 (the file or directory is corrupted and unreadable). __

  I tried to copy a file on my HARD drive on my HCSD card and received the error message 0 x 80070570 (the file or directory is corrupted and unreadable).
  HCSD card was used on an audio recorder, but I can play the majority of the file on the recorder itself. It's just that Win7 will not let me copy this file. Help, please. Thank you.

  0 X 80070570 - ERROR_FILE_CORRUPT

  If it relates to the wu or mu page, recommend to re - install activeX controls

  If it relates to the fix - then re - download the patch manually

• File or directory is corrupted and unreadable.

  In Windows XP Home Edition, I have a folder that I can't remove. This is the message I get: C:\Program\Norton 360 is not accessible. The file or directory is corrupted and unreadable. I tried to delete it using safe, run chkdsk f... How do I get rid of it so I can install Norton360?

  At first uninstall you it? Try the norton removal tool. I wouldn't install again. Its not terrible

• Windows Update does not work after you reinstall Windows XP SP3, get error: "the site has encountered a problem and cannot display the page you are trying to view.

  Original title: cannot run Windows Update

  I just reinstall my Windows XP and SP3, but I can't run Windows Update and gives me the following error message:

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  For self-help options:

  • Frequently asked Questions
  • Find Solutions
  • Windows Update Newsgroup

  To support options:

  • Microsoft online assisted support (no cost for Windows Update issues)

  Can someone help me please?  Thank you.

  I just reinstall my Windows XP and SP3, but I can't run Windows Update and gives me the following error message:

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  For self-help options:

  • Frequently asked Questions
  • Find Solutions
  • Windows Update Newsgroup

  To support options:

  • Microsoft online assisted support (no cost for Windows Update issues)

  Can someone help me please?  Thank you.

  [1] select start > run > wuaucpl.cpl > disable automatic updates > apply (if the setting is changed) > OK

  To disable the horse notification that appears in the status bar on automatic updates is turned off.

  Go to start > Control Panel > Security Center > resources > change the way Security Center alerts me > uncheck automatic updates

  [2] manually download the full install for IE8 exe and install IE8 and refuses to download updates at the time of the installation of IE8

  http://www.Microsoft.com/en-us/download/Internet-Explorer-8-details.aspx

  [3] manually download and install the latest cumulative security for IE8 update and restart the computer before

  visit windows update via the shortened link in your Start menu.

  When you have Win XP SP3 and IE8, it will be the necessary file recommend you download and save the file in the folder, and then double-click on and run the executable file from there.

  http://download.Microsoft.com/download/1/9/A/19A6AC47-9EA0-455F-B918-A44D25B5304C/IE8-WindowsXP-KB2898785-x86-enu.exe

  Restart after installing IE8 cumulative security update.  It should restart when installation is complete.

  [4] now to connect to windows update manually through your browser using the shortcut in the start menu link.  Ignore the warnings, recommendations to turn on automatic updates.

  Report back please on the status and please report problems with error codes. Thank you.

  Recommend you not install MSE but rather install a free antivirus like Avast or AVG.

  Recommend also you do not install Windows Search 4.0 these programs not to live pleasantly on most XP machines and cause CPU excessive loading unpredictable and inconveniently sometimes interfering with the usual ability to XP if not to multitask without problems.  Also recommend you only install Firefox is a browser much better than IE8 that will not work even at many Web sites.

• Remove a computer record of the said cant "the file or directory is corrupted and unreadable."

  I get error 0 x 80070091 "the directory is not empty.

  Try to use Unlocker to: http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtml.  This program works often when normal functions remove Vista not work properly

  If this does not work, what is the exact path of the folder and the foldername (C:\Users\\Documents\Bad folder or something else)?  You can open this folder or it gives you a different error message (If Yes, what does EXACTLY)?

  Try bootingg in safe mode (repeatedly press F8 during the boot process until the menu appears) and then switch to this folder and tries to remove it from here normally, and then again using Unlocker.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• \System Volume Information\ Sand.CFD corrupted file is corrupt and unreadeable please run Chkdsk utility

  Run the Chkdsk utility, but the error message is displayed the next time I start up.  How can I fix it?  I contacted Norton and they said it was a Windows problem.

  You probably had a good reason to get in touch with Norton, especially if the name of the file in question is in fact lightningsand.cfd.

  From what I can tell, it's a file placed in the directory SVI by some applications of 'security' Norton and (b) may be an encrypted file "Cryptoforge" (which sounds like something Symantec would do).

  I suggest that you completely uninstall your applications Norton following the directions here: http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20080710133834EN&ln=en_US if you really want to reinstall Norton applications, make sure you have both your multimedia installation and product key (s).

• When I boot computer I get this message... Remove the c:/System Volume Information directory. EFaDATA\SYMEFA. DB-log is corrupted and unreadable

  Original title: damaged and unreadable

  When I boot computer I get this message... Remove the c:/System Volume Information directory. EFaDATA\SYMEFA. DB-Journal is damaged and unreadable... How to fix this?

  Thank you very much for your help.
  I discovered the new external hard drive was the problem. Formatted as NTFS seems to be a problem so I reformatted to FAT and the problem disappeared.
  The error message was: the journal of System Volume Information EfaData SYMFA DB file or directory is corrupted and unreadable.

  Thanks again.

• Error "Unable to create cache. The file or directory is corrupted or unreadable. »

  Original title: cannot create the ReadyBoost Cache

  Win7-64 bit-8gbRam use Flash drive for ReadyBoost cache HP16gb now receive the message: "unable to create the cache. The file or directory is corrupted or unreadable. "Should I delete the old cache file and try again, or is there another solution? Thanks for any comments.

  Well Ok,

  Run a check disk on the USB and see if it detects any errors.

  Refer to the article below for assistance.

  Check your hard drive for errors
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Receive the error "E: is not accessible. The file or directory is corrupted or unreadable.

  Original title: USBnot work

  Today, I inserted a USB key works perfectly in my laptop computer and got this message:

  "E: is not accessible. () The file or directory is corrupted or unreadable.

  Ideas of how this could be everything and no matter what suggestions how to fix it?

  I use an Acer laptop E1-522 (a new one that just came back from the manufacturer after warranty repairs and also had a technician called and insert a new hard drive because of problems with product key).

  I use Windows 8.1 and have used Internet explore and currently using Firefox as my browser (same questions with both browsers).

  Thanks in advance.

  Sorry, I don't remember the sequence that I used, but messages asked me to change the drive letter of the drive that I was using, so I changed it from E to F. He has not made a difference, because I always get a message "the disk is damaged or unreadable. Finally, I formatted, so I guess it should be the end of the story. I got lucky that didn't not lose all the useful data.

  Thanks for your help. I very much appreciate the way in which people help "technologically challenged" people like me.

• The file or directory is corrupted or unreadable

  I have a number of empty folders on an external hard drive that I want to delete. I managed to delete the files in these folders individually, but get the following message... "' Can't delete # the file or directory is corrupted or unreadable", when I try to delete the files. "  I tried to delete it by Total Commander without success.  Your help is greatly appreciated.

  Sometimes corrupt files/folders can be repaired by a 'chkdsk' disk check operation while specifying the "/ R" or "Repair" option...

  "How to perform the disk error checking in Windows XP"

  <>http://support.Microsoft.com/kb/315265/en-us >

  It is a good operation realized in a regular maintenance of your computer and any time that the disc problems are suspected.

  HTH,

  JW

• Receive error messages: E:\ IS NOT ACCESSIBLE THE DISK STRUCTURE IS DAMAGED AND ILLISIBLE and unable to run CHKDSK at startup

  Original title: corrupt master file table pleae help

  Hi all I have a problem I hope that someone can help me with
  first of all, I have a toshiba satellite laptop computer running windows vista.i have 2 drives c: and e:
  c being the main one with windows and e being the backup and where I put a lot of my files, movies, etc.
  IV had no problems atall and then I went to the E drive access yesterday and first had it that no info under the drive icon does say just LOCAL DRIVE E:
  When I click on it I get this message E:\ IS NOT ACCESSIBLE THE DISK STRUCTURE IS CORRUPTED AND UNREADABLE
  I tried to run chkdsk at startup and cmd prompt and I get this message "corrupted master file table.
  cannot recover master file table chkdsk abandoned... " Device Manager sees no problem. Event Viewer, says "the file system on the disk structure is corrupted and unusable. Please run the chkdsk on the E: volume utility. »

  I have a lot of files on the drive I want to lose.can someone give me advice on how to solve this problem, I hope iv gives you all the info you need. Thanks in advance

  Hi helzf,

  You can try to run a Checkdisk on drive E to fix disk errors that can cause this problem. You can make a backup of the data on this drive and try to run checkdisk.

  Check out the link:

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk.

  Hope this information is useful.

• Error "the website has encountered a problem and cannot display the page you are trying to view. "Error number: 0x8024400A" when you try to install the updates

  Original title:

  I just reinstalled Windows XP on a laptop.  When I click on Windows Update in "all programs" selection, I'm headed on the update site, but I get this "the website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. "Error number: 0x8024400A" is it an express update or Microsoft update.

  Hello
   
  Method 1:
   
  Run the fixit available at the following link.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
   
  Method 2:
   
  Check out the following link.
  Windows Update, on new installation 0x8024400A error
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-Update-error-0x8024400a-on-clean-install/4c79d20d-A4B3-4724-A6D8-4a768559038a

• Error 0 x 80070571: the disk structure is corrupted and unreadable

  I recently had an error message saying "error 0 x 80070571: the disk structure is corrupted and unreadable," in reference to C:. I tried chkdsk oh so many times. No change.

  Recently, I was able to access the C: files sporadically. Occasionally, sometimes not. However, I can access my files in safe mode.

  When I start in normal mode, the system is acting funny. I will try to describe. It starts very well, go anyway for the office and everything. Sometimes, I am able to use the laptop for a few minutes until everything freezes but the cursor; nothing else responds, even not ctrl + alt + delete. Other times, I'm still not that chance. You know how pointing the cursor on an icon temporarily highlights the icon? Highlight the thing is sometimes just to block the system. Once locked, all I can do is hold down the power button.

  I tried the system restore, but it never once helped me with the cause of the system error.

  I also deleted some programs out of the startup list. Not sure if this would have an effect.
  I am running Vista Home on a HP Pavilion dv5.

  Thanks for the reply.

  I tried all three methods.

  Methods 1 and 2 have helped for a while, but not long. Method 3 found nothing.

  The only solution I can think of is to backup my personal files, then do a system format. Before you do a format, is there anything else that you could recommend?