I get more kod when try to uppdate windows: 0x13EC
Hello
I get more kod when try to uppdate windows: 0x13EC. The uppdate name is Microsoft .NET Framework 3.0: Sprakpaket for x 86 (KB928416).
Sincerely
ARIO Nahram
Hello
1. don't you make changes on the computer before the show?
2 are you able to install some other updates?
I suggest you try the steps mentioned below and check if it helps.
Method 1: Fix the term.
The problem with Microsoft Windows Update is not working:
http://support.Microsoft.com/mats/windows_update/
Method 2: If the problem is still not resolved, you can try to reset the Windows Update components.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/)
How to back up and restore the registry in Windows
Hope this information is useful.
Tags: Windows
Similar Questions
-
I get more choice when I tap on the search line
When I updated Firefox I get more choice when I type in the search line how can I solve this
See also:
- Tools > Options > privacy > History: "don't forget to search and form history."
- https://support.Mozilla.org/KB/form+AutoComplete
-
Do a Windows Update 80070490 error when try to use windows update
I get an error 80070490 when I try to install the following updates
Update security for Windows Vista (KB967723)
Update for Windows Vista (KB970430)
Update for Windows Vista (KB972145)
Update for Windows Vista (KB979306)
They are listed as important updates. I installed the other updates for Windows Defender, but these do not seem to settle. My history of update, it seems that the problem began around 12/03/2010. Is when updates tried to install, but they have not and they tried to settle down since then. I have to do a system restore. What do you guys recommend. I did a Norton Scan, scanned with malware, CC Cleaner Registry tool and run all that much good. Nothing found. Fixed all errors registry with CC Cleaner and they still do not work. Even scanned with windows defender. Doesn't seem to be a virus, would not exclude it. Everything seems fine. Help, please. Thank you.
As you say, that you have a "Dell" can also be interested in this:
http://support.Dell.com/support/topics/global.aspx/support/DSN/en/document?c=us&docid=347576&l=en&s=Gen----------
0 X 80070490 - ERROR_NOT_FOUND
Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.The error you receive occurs if there is corruption in the manifest of component maintenance base.
Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
http://support.Microsoft.com/kb/931712
"Explains the SFC / Scannow.A repair install is the usual solution of SFC/scannow does not work.
However, a repair installation (AKA In - Place Upgrade) will not solve the problem if it is due to a hijackware infection.You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
http://support.Microsoft.com/kb/958044NB: If you have installed SP1 or SP2 for Vista updatehttp://support.microsoft.com/kb/948537
Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1/SP2 has been installed.
Uninstalling SP1 or SP2
The reason being that the original installation has been updated with SP1/SP2 and so the possibility of upgrade is not available because you have is newer that what you started with so Service Packs must go.
See also:
How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspxTaurArian [MVP] 2005-2010 - Update Services
-
I get an error when I start up windows.
I get this error whenever I start up windows. http://i.imgur.com/CQ3mDUP.PNG
Caused by a program that you have installed, a game or crack maybe?
-
I get Aero Lag when opening and closing windows in Windows 7
original title: Aero Lag when opening and closing windows in Windows 7
UPDATE!
OK because here we have the ball, I'm changing it to better reflect what is happening. The links below are some of the hundreds of post, will find you on the internet about this Aero lag. Some offer workarounds and some are not. I just googled Aero Lag and it was on the first page.If you have the same problem, please provide:
1. what kind of graphics card you have.
2. what kind of driver are you using (Win7 preinstalled or drivers from the manufacturer)
3. your version of Win7 has an update or a clean installation.
4. what motherboard you have.From the sounds of it, Microsoft is looking for a solution.
I also ask for the forum administrator to make a sticky like many people is facing this problem.
-Randall
http://www.SevenForums.com/performance-maintenance/22313-Aero-lag-good-system.html
http://www.SevenForums.com/graphic-cards/21250-Win7-Aero-Windows-have-choppy-delay-when-opening.html
http://social.technet.Microsoft.com/forums/en-us/w7itproperf/thread/a013396d-8953-4E32-8D13-f2d119cd730d
http://www.flamehaus.com/BBS/-vp3478764.html
http://www.YouTube.com/watch?v=YKNj_90E_PIhttp://www.hardforum.com/showthread.php?t=1465844
http://windows7forums.com/Windows-7-hardware/1549-Windows-7-video-lag.html
http://windows7forums.com/Windows-7-software/23315-gaming-video-lag-choppyness.html
http://windows7forums.com/Windows-7-support/5287-Aero-lags-when-open-new-programs.html
http://Forum.EeeUser.com/viewtopic.php?id=66007
http://www.Neowin.NET/forum/lofiversion/index.php/t787172.html
http://www.YouTube.com/watch?v=YWdVrSUhvLERandall
Solved my problem with Aeor lag.
Replaced Gforce 8800GTX with Gforce GTX480.
Spent several days on this problem without solution.But here's a very simple solution that works for me.
I removed the USB extension cablefor my CreativeHS - 1200WirelessUSB Gaming Headset.
Aero lags when extension Iused USB and headphone load.
Without extension USB cable, all right.So he thinks it's a USB extension cable voltagedrop, forces the system to lag. ?
Hope this can help.
Sincerely,
Dennis Psilander -
Hi, I have an iphone 3gs. iOS 6.1.6. The problem is most of the things on my iphone it takes 7 upwards. When I try to update it keeps denying me.
Say the error message.
-
I had already downloaded Adobe Audition and then my computer crashed, now he runs back I re installed the find had only 8 days left in the trial test, but I need to at least another 23 days. Is it possible to get an extension to the trial?
There is no easy way on the same computer.
You can use another computer for another try for 30 days.
-
Error is 0x800705b4 - when try to run Windows Defender
original title: 0x800705b4 error how do I fix this
Hello, folk. All of a sudden, I started getting the following error: 0x800705b4 - when I try to run
WINDOWS DEFENDER. It is BRAND NEW. I've never met this error before. I am
running a Pavilion hade x 64 DUAL CORE with firmware AMD. MY OP SYS/GUI is VISTA HOME
PREMIUM. I'd appreciate some help here. VERY IMPORTANT, AS I CAN
RUN DEFENDER.
Thank you, buz in grove, ok
Hello
read this information on the Defender:
· If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default
the basics of Microsoft security has its own version of windows defender
and other anti-virus programs use their own particular type of application to scan for spyware and malware
It of nothing to worry and is the default action, which is designed for them to do
If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable
and if you need to change startup programs read this information on the other methods of doing it without using defender
using msconfig read this tutorial;
How to use MSCONFIG in Windows Vista
Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup
http://netsquirrel.com/Msconfig/msconfig_vista.html
and also try this program;
This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902
and for a good anti-malware program to use instead of Defender, try the FREE version of malwarebytes anti-malware
Download update and scan with the free version of malwarebytes anti-malware
-
Error - Connection Internet Service does not start when try to start Windows Security Center.
Original title: Windows security center usually run in windows XP.
When I open the control panel and click on security, Windows Security Center indicates that it is not executed and wont run then when I try to turn it on I say error message does not start internet connection service. Also, my computer has been slowing way down lately and it takes forever to do even the simplest taskes. I just uninstall norton because my subscription ran out and then I installed MSE and malwarebytes MSE runs even slower, so I got rid of him.
-Edit
I also tried to use FixIt, but he said that there was an error during installation.Thank you. I had security work center. That's how I did it.
I wen to your link and found that I needed to go to start-my network places - view the network (in the sidebar) connections - click Properties (click on) Local Area Connection 2 - click on the Advanced tab - click settings (skip this step if who does not appear)
now, here, he said that there is an error and that I needed to start a process. I think it was 'Windows management instrumentation' but whatever it is, click Activate and change the startup type to automatic, and then click Start. then try to then you should do the same thing with
- Application Layer Gateway Service
- Network connections
- Knowledge of the network (NLA) locations
- Plug-and-Play
- Remote Access Auto Connection Manager
- Remote Access Connection Manager
- Remote procedure call (RPC)
- Telephony
Then Security Center. When you press OK in the properties, you should see a small lock appears on the network connections icon. now Security Center should work.
useful articles:
http://support.Microsoft.com/kb/919291
http://support.Microsoft.com/kb/827328
http://TechNet.Microsoft.com/en-us/library/bb457029.aspx -
Get the error when sending e-mail - windows Mail
The message could not be sent. The authentication setting are may not be wrong for your e-mail [SMTP] Server outgoing. To resolve this issue, go to help, search for "Troubleshoot Windows Mail" and read the section "I have problems sending e-mail". If you need help to determine the appropriate server settings, contact your e-mail service provider.
The rejected e-mail address was 'MY E-MAIL ADDRESS'. ' Subject 'test11', account: ' pop - server.neo.rr.com', server: ' smtp - server.neo.rr.com', Protocol: SMTP, server response: ' 530 authentication is required before sending [R0107005] ', Port: 25, secure (SSL): no, Server error: 530, error number: 0x800CCC78
I have had no problems until the week last now I can't send anything. I deleted all the old emails in sent, Outbox, deleted files without help. My email servers and password have not changed over the years?
Using Vista with Windows Mail
"Protocol: SMTP, server response: ' 530 authentication is required before sending [R0107005] ', Port: 25...
Click on Tools > accounts > {account} > properties. On the servers tab, select my server requires authentication. On the Advanced tab, change the port to 587outgoing mail server.
I have had no problems until the week last now I can't send anything.
TWC upgrade all their e-mail servers, including those for the accounts of RR. If you still see an error after changing the settings as above, you could be better implemented in a new account with the parameters given on this page: What are my incoming and outgoing mail server addresses? Disable the include this account when receiving mail or synchronizing in the tab general in the Properties dialog of the existing account in the same time. When you have the account of work, you can transfer messages of files from the old account (e.g., sent items) to a new one, and you can then delete the old account.
-
I get an error when I upgraded to windows 10.
The start screen appears and then he says: "Lightroom has encountered an error when reading the previous cache and needs to stop smoking" I restarted my computer and lightroom several times. Any suggestions? TIA!
Hi elodie
Greetings!
What version of Lightroom do you use?
You must remove the Hide Preview for your Lightroom Catalog.
It is located in the same folder as the catalog in Lightroom. Preview cache name ends with Previews.LRDATA and should be deleted. Not to be confused with *. LRCAT, which should not be deleted. Here is a picture of what it is named as default LightroomcatalogPreviews.Lrdata.
Location /Pictures/Lightroom on Mac and my Pictures\Lightroom on Windows Pictures/Lightroom on MAC
Delete this folder and restart Lightroom
Let us know if this helps
~Assani
-
Original title: there was an error of analysis of the data on your system
I get this error when trying to use Windows Easy Transfer to prepare to move from an XP PC to a Windows 7 PC. It passes through the part of the selection on where I later import files then says he is scanning the disc and fails with the above error.
In the search for this error, I found information of 2007 could be be a nero problem AVI. I don't have Nero installed and I can't find the log files in the directory MIGWIZ.
It is a small (50 GB) HD who do not have much space available on it (I'm not in front of it now). Is there a minimum amount of free space needed to run this executable? That is why it is a failure?
Could there be other issues behind this failure?
Thanks in advanceHello
Follow these methods and check if that helps.
Method 1:
I suggest to download from the link provided below windows easy transfer tool and install it and then try to transfer the data back.
http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer
Method 2:
Refer to step 2 and step 4 from the link provided below:
http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7
Method 3:
I recommend you to try different types of transfers using different media. You can also do a disk clean up of the Windows XP computer. Remove unwanted programs from the Windows XP computer. Do a disk clean, right click on the C drive, and then click Properties. Clean, then click on the disc.
For use with different media windows easy transfer, you can click on this link for steps to follow:
http://Windows.Microsoft.com/en-us/Windows7/transfer-files-and-settings-from-another-computer
-
MICROSOFT ERROR REPORTING
HR:0 X 80070641, I get this error when trying to install windows live messeneger for windows xp... any help please would be nice I have windows install 4.5 installed and it works fine. so it is not and I've tried everything I can think of any help please and thank you!
Hello
The question you have posted is better suited in the Windows Live community forums. Please visit the link below for any other help:
-
Error 0x80072EFF...
I get this msg when trying to update windows...
can someone please
tHi Bevmacs
try running this useful tool and try to update again.
http://support.Kaspersky.com/downloads/utils/TDSSKiller.exe
Let me know if you have solved.
Antoori
-
8007000e error when trying to run Windows Update
Separated from this thread.
Hi - I'm getting the same problem. Just upgraded from Vista to windows 7 and when try to run windows update, I get 8007000e error. After you run the convenience store she fixed "registration for the Service is missing or corrupted" and "recent updates installation problems".
It does not solve "problems installing recent updates"
Anyone able to advise? Thank you!! :)
Start a new thread in the future, rather than ask for help in another thread.
Use the following tutorial to reset Windows updates completely and check if it helps:
Be sure to run the script as administrator.
Maybe you are looking for
-
Satellite M60 - 164 get bluetooth to work
I want to know if my pc has bluetooth on it, it seems she is in the device maneger but I can't make it work so I'm wandering if he is actuly on the phone it has a section in the control panel can anyone help please
-
Scan on Macbook Pro does not.
Hi, my MacBook Pro (OSX El Capitan) is no longer will allow me to scan documents. It connects to printers and prints still, but the scanning program that used to come to the top when I'm connected to a scanner appears more. I tried to reset the print
-
It's like you need to refresh the page if your wifi turn off whilest using the internet (hope that explains) however this Internet page has no task bar so I'm not able to close, I am also unable to see the start menu. I tried Ctrl, Alt and DEL, and t
-
When I open my external hard drive via laptop, windows Explorer restarts automatically.
When I open my external hard drive via my laptop, windows Explorer restarts automatically. Why is it so? It opens perfectly well in other major tours. I use windows vista.
-
Is it possible to remove the "Windows Movie Maker" program?
I do not have a film or a video camera of any kind, and never, I won't buy one. I'll never have no reason to use the "Windows Movie Maker" program, which is an OEM program in my computer. It would be nice to delete this program? Thanks for any a