I get no sound at all. run tests, checked the connections, etc. His record game

Similar Questions

• His record game, my microphone is picking up all the sounds around me and to transfer them to my helmet.

  original title: his record game

  For some reason, all listening to ANYTHING on my computer with my headphones Bose, which are designed to eliminate all surrounding sounds, I hear all around me, including Tape this message, as if my microphone is picking up all the sounds around me and to transfer them to my helmet.  I have accidentally done to cause this, please?

  Thank you!!!

  Hello

  Click with the right button on the speaker near the right lower clock - recorders - then right click in the BOX
  and check also show a disabled device and show disconnected devices. Then double-click on your microphone and
  on the levels tab - MUTE it. You could also experiment with using a level lower or less thrust on this
  same tab.

  Connect a microphone, music player or other audio device to your computer - see 'connect a microphone.
  to your computer"which has an image of these parameters.
  http://Windows.Microsoft.com/en-us/Windows7/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Satellite A30: PXE - E61 media test check the cable failure

  OK got this message on a cell phone of friends
  Others have played with him and made it worse, and now I received the laptop to try and fix.

  When you start to get

  PXE - E61 media test check the cable failure
  PXE - M0F outgoing PXC Rom

  If his tent to boot from the local network instead of the hard drive I have reset bios by default I disabled everything when I F12 boot to hard drive get the error message rΘation and one at a time, that nothing works even when I try to disable lan starts, he tries always to.

  When I try to install from disk backup it is hard disk not found, but in the bios the hard drive is located and can not boot from it.

  I tried with winxp pro disc to try not to get an OS on the laptop any partition to the OS but a blue screen with an error 0 x 00000050 CrashFree disk gives error 1170 if I remember correctly.

  I can't update the bios with new version because she needs windows, I can't stop the lan because there is no setting in the bios very minimul with about 4 useful settings in it.

  Is the hard drive turned or is this a bug in the bios that it detects drive hard, but does not assign a letter properly?

  If I try the recovery console in xp Setup there is no disk to read or write, if I maps the drive in recovery only the cd/dvd rom found no hard drive.

  Any help would be great thank you because I don't know what to do, I don't think that the hard drive is shot myself but maybe if I can get a laptop and try the hard drive what she will say if it is or not, but for now I'm stuck with no. had to go.

  I tried many things
  1. cdrom out and replaced plugs
  2. Jack hard drive out and replaced
  3 took Ram out and replaced
  4. start since the utility disk
  5. start from the winxp disk
  6. Windows XP recovery console no hard disk on c d e f g
  7 disc utility says no hard drive gives me a x: > promt error number 11030 invalid destination by car. Hard disk by bios HITACHI DK23FA-30-(PM)
  9 winxp error if I try to install 0x0000008e

  Post edited by: Shoa

  Post edited by: Shoa

  Hello Shoah

  You did what I would recommend.
  I remember what one of my friends has had a similar problem on an A200. But after the BIOS reset by default, he was able to install the OS from the recovery CD.

  The whole is very mysterious. It looks like a HARD disk failure, but the HARD drive is recognized in the BIOS. But have you checked the HARD disk in other laptop or computer?
  You can try to connect the HARD disk via the external USB HDD controller and could check if it s ok and could format.

  I recommend also to remove the CD/DVD drive and the HARD drive, then set the BIOS to default settings immediately (don't forget to save changes). Then try to power upward without the HARD disc and the drive.
  To my knowledge, you should get an error message.
  Then stop the laptop and put both the device in Notepad. Then go to BIOS and check if both devices are properly recognized.

  Finally, I must say that I don't know if my proposal will help m.
  If she won't help, you will need to contact an ASP in your country, because it really looks like a serious problem.

  Good luck

• When I try to connect directly in multiplayer FSX without gamespy, every time I get an error message saying: unable to create the connection to the host.

  When I try to connect directly in multiplayer FSX without gamespy, every time I get an error message saying: unable to create the connection to the host.

  I need help
  Kind regards

  Thank you very much!

  To host successfully a FSX session what follows is the key enabling

  my client (s) to join my host FSX session!

  "Players Maximum (for a shared together plane 2) leave the locations reserved for friends to 0 set."

  6122 6112 UDP port translation FSX multiplayer traffic of my remote 2 wire gateway to my router Linksys Wireless N DMZ to access game FSX host...

  Only a single router in my configuration of the DMZ, the external network to the router,

  in this case, the 2 wires, had defined port forwarding.

  Am now enjoying Gamespy (R.I.P.) FSX free hosting for my MP FSX sessions via direct connection.

  5 high to the author!

• How to get a list of all files/folders on the Sansa Clip +.

  Hello

  I have a lot of MP3s on my Clip +, but realize that I put there duplicates in different folders. My plan was to use a command prompt to get a list of all the files on the device, and then use a utility that shows me duplicate names and the locations of the files. I could then simply delete the Clip +.

  The problem, it is that the Clip + is simply presented as a 'portable' in Windows Explorer (Windows 7 Home) - there is no way to assign a drive letter :-( Which seems a bit odd, as it is, after all, plugged into one of my USB ports... I used the dir command on all drives assigned in my computer as "devices with removable storage". One of them must be the port to which the Clip + is attached, but they all say "device is not ready". So the Clip + is not identified in this way.

  Is it possible at all to get a list of the files that are on the Clip +?

  Thank you!

  That's how the Clip + shows when connected in USB MTP mode.  If you connect mode MSC (defined in the control panel), Clip + comes as a disk.

  But: the problem you have is, Windows displays only the files that have been transferred in the Clip + under USB mode then logged in as.  I don't know if this applies to designated offices, but - you could try and see.

  Another solution would be to copy all of your files on your computer, under MTP mode; Delete the files on the Clip +. move the Clip + mode MSC; and then transfer the files to the Clip +.  Now, you should be able to see the files under Windows (always connected in MSC mode) and can run the utilities that you had planned.

  I hope this helps.

• His record game, I can get sound through headphones

  I can't get sound through headphones and not on the computer

  First of all, what PC model do you use?

  Desktop or laptop computer?
  You can try to check what audio output device is set as default
  To do this, right-click on the Volume icon control near the clock
  Choose playback devices in the list
  If there is a speakerphone option, select it and click on set as default.
  It would also be possible that you need updated for your sound card drivers.
  or if it's a desktop PC. It cannot have a built-in speaker. Thus, headphones or external speakers might be your only option.

• When I click send/receive in Outlook Express 6 I get this error: "your server has closed unexpectedly the connection."

  PLEASE HELP ME WHEN I SEND/RECEIVE I GET THE FOLLOWING

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Account: 'Hotmail (1)', server: 'pop3.live.com', Protocol: POP3, Port: 995, secure (SSL): Yes, error number: 0x800CCC0F

  I WAS ABLE TO SEND WITHOUT PROBLEM, BUT I CAN'T RECEIVE. ANY HELP WOULD BE GREATLY APPRECIATED.

  original title: PROBLEMS WITH OE6

  Now, I remember with the caps. No worries.

  What link are you looking for? If it's one of your old son, ask we click on your profile name and watch my Questions.

  http://answers.Microsoft.com/en-us/profile/e939290b-f63c-4E98-B414-2f277fe07e42

  Repost on the Inbox.

  Error number: 0x800C0133 = a corrupt Inbox.

  Move any message you want to save to a local folder that you create. Then, remove the problem of Inbox as follows.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.

  With OE closed, find the box of Inbox.dbx and delete it. Another will be created automatically when you open OE.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  *******************************************

  I can't help with the problem of the browser toolbar. Please ask in a forum for IE, if you use IE.

  Internet Explorer forums
  http://answers.Microsoft.com/en-us/IE

  In addition, what is the exact text of the Internet security warning? I don't know if who came fron OE or your safety program. Or even a matter of Hotmail that I can't help with either, because I've never used Hotmail. Hotmail-specific questions should ask here.

  Windows Live Solution Center Hotmail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=1

• When using windows scan & fax tool I get: _ 'network processing timed out. Check the scanner settings & network"error

  I am running Vista ultimate on 64-bit computer with a Linksys WRT310n router in LAN mode. I also have a Canon MF4370dn printer that prints screen & documents ok. I can see the printer on the network.

  I'm mainly interested in the function of scan here.
  With the mf scanner set to scan mode of network (according to Canon), I opened the Windows scan & fax tool, I select the WIA Canon scangear printer/scanner/fax to network & I get a panel where you select dpi/jpeg/bmp etc. When I select the function preview or scan I get an error message that says "network timed out treatment. Check the settings of the scanner & network.

  I read a lot of sour comments on the analysis of the network of this machine. It's a shame, because it is a machine of great, fast & compact mono laser. I have disabled the firewall of the router, still no go. I also tried the rout USB with software to reinstall with network for others, printing & for my machine but italways deferred to the network on mine with the same error message.

  I also read where it analyzes only at 300 dpi... so with all these pros & cons I decided to get a good, dedicated, scan that will probably better results of the scanner anyway.

  Thank you for all the good sites & info you have provided.

  Newbie.

• His record game - I hear any noise from the computer all of ym,

  I checked the Device Manager and system main volume installed a package of Codecs. I get the message "this device is working properly" when I check the properties of an audio device...  But I have no sound. everything seems to work normally,
  Play files music and video, but no sound, not even the warning system sounds are on.

  Hello

  (1) operating system do you use?

  (2) did you change on your computer?

  I suggest you to follow the links and check out them.

  Audio playback convenience open

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• His record game - I hear myself and it makes a ringing sound sharp, unless I have mute

  Unless I turn my speakers off I hear a high pitched ringing noise and I can hear an echo of myself. I tried to disable the echo but it has not changed what I meant. I need help to find how to stop these things and how to do it where I can't hear the audio and videos on my computer

  It's the feedback of your microphone.  The microphone sends what he means with an amplifier for the speakers, the microphone then picks up all of the speakers & sends through the amp to the speakers & round & round accumulated volume of each cycle until that it exceeds what the system wants to deal with.

  Cut the microphone to control panel, sounds and experience then find a gain level for the microphone causing feedback.  And more of the Control Panel, sounds, you should find a control panel entry for your sound card, where you can change the settings.

• I can't print anything; check wireless connections, etc. I get the message: Communication not available - not able to communicate with the computer-printer

  The printer is listed under devices.  Help

  Hello
  1. If it works well before?
  2 did you change on your computer before this problem?

  3. is the printer connected to a computer network?

  4. what operating system is installed on your computer?
  What version of the operating system Windows am I running?
  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running
  5. how to connect the printer with your computer?

  You can follow the suggestions and see if it helps.
  Method 1
  You can run the printer troubleshooter.
  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2
  You can follow the procedure in the article.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  See also:
  Network printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
  Note: The article is also applicable to Windows 7.
  Share a printer

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer
  File and printer sharing: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/file-and-printer-sharing-frequently-asked-questions

• I use a laptop Windows 7 in the office wireless remote for my desktop running Vista. The connection disconnects regularly "try to reconnect 1 20.

  Hello

  I use a laptop Windows 7 in the office wireless remote for my desktop running Vista. The regular connection disconnects after a few minutes, then displays the window pop-up "try to reconnect 1 20. It always with success reconnects itself during this first attempt. During the time when the connection is lost, the internet connection is fine, in other words, I could use my cell phone to browse the internet.
  Any ideas what could be causing this?
  Thank you.
  original title: remote to vista win7 desktop keeps losing connection and reconnection se

  Hello

  Follow the steps in troubleshooting section and check if that helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  See also:

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

   

  The problems of desktop remotely

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Remote-Desktop-problems

• Get adapter file binding error while testing in the EM console.

  I have an asynchronous process that I used the file adapter to write output to the local directory, deployment was successful but when I try to test it, I get the below error. Can any body if you please Help.Thanks in advance!
  
  input > < message > <
  < invokeGetCurrentCodesInputVariable > < part name = 'request' xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" > < getRequest xmlns = "http://xmlns.oracle.com/GetTSPCodes" / > < / piece > < / invokeGetInputVariable > < / input > < fault >
  < bpelFault > < faultType > 0 < / faultType > < remoteFault xmlns = "http://schemas.oracle.com/bpel/extension" > < a name = "summary" part > < summary > Exception is is produced when the link has been invoked.
  Exception occurred during invocation of the JCA binding: "JCA binding run 'Write' reference operations have to: null input Source.»
  Null input source.
  Input source is null.
  Please make sure that the outbound interaction receives a valid payload.
  ". The called JCA adapter threw an exception of resource.
  Please review the error message above carefully to determine a resolution.
  < Summary / > < / part > < part name = "detail" > < details > null input Source.
  Null input source.
  Input source is null.
  Please make sure that the outbound interaction receives a valid payload.
  < / detail > < / part > < part name = "code" > < null code > < / code > < / piece > < / remoteFault > < / bpelFault > < / fault > < faultType >
  < message > 0 < / message > < / faultType > < / messages >
  
  
  REDA

  Your bpel assign, call before the file adapter may be incomplete. Make sure that you have defined in your copy of application.

  Here is an example:

  
  
  Query = ' / ns3:purchaseOrder/items/item [1] "/ >
  
  Query = ' / ns3:purchaseOrder/items/item [1] "/ >
  

• Firefox 5 works but after 6 installation I get this error when you try to run it: check the details below...

  Firefox 5 works fine, but as soon as I install 6 and try to run it, it gives me this error msg:

  "XML Parsing Error: undefined entity location: chrome://browser/content/browser.xul line number 233, column 5: key-^ =" "< =" "id ="key_scratchpad"keycode =" & amp; scratchpad.keycode; ' modifiers = "Shift" p = "" > < / key > ""

  He also said during installation that it can not find updates for Java and Skype extensions.

  If this does not work in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.

  • Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
  • Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

  Remove extensions that do not have a button in the extension manager are installed by other programs and should be disabled or updated via this software.

  You can uninstall and remove extensions of the Java Console, you do not need to run Java applets.

  See:

  • http://KB.mozillazine.org/Java#Multiple_Java_Console_extensions

• How to get a password for all accounts - I have the cloud, I adjust, Apple store

  Can how I have a common password for all accounts from Apple?

  Use your Apple ID.