I get "scesrv.dll is not found, how to re - install this?

Similar Questions

• Im running windows vista and office 2007. Many of my files are not open and I get the message "application not found" How can I reapir this?

  I recently had my computer repaired and Office 2007 has been reloaded. Now I get the message "not found when I try to open some files and application for a single file, «windows cannot find the file...»» ».

  If I change the name of the folder, some files were opened.

  In one case, the file opened under the new name [I added a letter], then later not open again - got the same message "application not found" and the Red Cross of death.

  Hi Martin,

  How you try to open the file? You are double clicking on the icon of the file to open or by using the menu file-> the option open in the application to open the file?

  The question is limited to Microsoft Office applications?

  You can visit these links and try the steps in the articles.

  A Microsoft Excel, Word or PowerPoint file does not open because of incorrect file associations

  http://support.Microsoft.com/kb/2464297

  A file does not open in the program that you expect when you try to open the file in Office

  http://support.Microsoft.com/kb/918957

• Whenever I turn on my computer, I get "Sqlite3.dll is not found."

  Original title: "Sqlite3.dll is not found."

  Whenever I turn on the computer. Once the desktop screen .it's a message "this application has failed to start because sqlite3.dll is not found. reinstalling the application may fix this problem".but the computer still can run that I don't know what was wrong and how can I fix this please?

  I'm not leaving your system works in selective startup mode, because that would leave you with a sloppy XP configuration.

  You must find the faulty startup item and get rid of it.

  Here's how:

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner. Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply turn off (uncheck the entry), reboot, and if the problem is resolved and things work normally and everything works fine, then delete the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

  In 1985, there were 11 known computer viruses.  Today, there are over 70,000 and new threats are detected every day.  Always update your virus definitions before running a scan.

  Restart your computer and solve the outstanding issues.

• When I get a message on my computer it come say arccon.dll does not work how do I fix this proplem.thanks.

  www.arcCon.dll. He says it does not work.

  http://pcsupport.about.com/od/findbyerrormessage/a/arccon-DLL-not-found-missing-error.htm

  Arccon.dll not found error resolution

  Read the above.

  See you soon.

  Mick Murphy - Microsoft partner

• HP Officejet6700: at startup I get 'HPStatusBL.dll' is not found.

  Recently, I uninstalled my Officejet 6700 upgrade to 8715 Officejet on my laptop (Dell) 64-bit.  Now, at the start, I get the following error message:

  "C:\Program HP HP officejet 6700\bin\HPStatusBL.dll be found" 8715 installation works very well. The laptop does not all records related to the 6700 printer.

  Hello
  From file Exploer type %appdata%\Microsoft\Windows\Start Menu\Programs\Startup in the address bar and press ENTER.
  Delete the shortcut to monitor alerts for Non-Existing printer ink and the error should appear is no longer.

  Kind regards
  Shlomi

• with windows photo gallery, it is said photobase.dll not found how can I solve this nothing worked for me.

  Just at the moment where I try to open windows Photo Gallery, he said Photobase dll. not been found.  Now, what

  Have you tried to run the System File Checker tool?

  http://support.Microsoft.com/kb/929833

  You can also try to repair windows live photo gallery by clicking on start---> Panel---> Add / Remove---> Windows live essentials and selecting the repair option.

  Good luck.

• Error message: Winlogon.Exe could not locate the item. This Application did not start because Comctl32.Dll was not found.

  Update of security hung up during installation. I waited 12 hours for the update complete and nothing happened. Whe I reboot XP P4 syster, I get the Message from messageError: Winlogon.Exe could not locate component. This Application did not start because Comctl32.Dll was not found.

  Re-installed SP3... Installed hard drive then... cloned old drive and new drive... After several updates, it seems to do very well. Tried several programs/operations and seems normal. One day turned but didn't have to build another system or this one back up.  Thanks for the idea.     F

• "SiSUSBrg.exe.exe - Unable to locate component" appears at startup. "This application has failed to start because SIS_Lib.dll is not found."

  Original title: SiSUSBrg.exe

  "SiSUSBrg.exe.exe - Unable to locate component" appears at startup. "This application has failed to start because SIS_Lib.dll is not found."

  Hope that this is not a virus!  Help?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353
  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• iertutil.dll was not found after trying to download internet explorer 8. I can't get into my computer. Not even the start screen.

  I can't get into my computer.  All I can get is the Task Manager.  It shows all my still intact material, I'm not him.  Not even to my home screen.  All that appears is my screensaver and a message saying to re - install iertutil. DLL... but how to do when I can't.

  Maybe someday, we will see again the proposal to:

  Once you open the Task Manager try the commands below.

  1. in the Task Manager, click file, and then click new task

  2. now type rstrui.exe and click OK

  This would launch the system restore on the computer refer the below Microsoft article more about the restoration of the system.

  If you really try , you would find that it does not work because rstrui.exe is unlikely that never will be in the PATH statement.

  If you want to launch the restoration of the system from the Task Manager, you will need to perform a new task like this:

  %SystemRoot%\System32\restore\rstrui.exe

  If c:\windows\system32\iertutil.dll is missing, you will see a message like this:

  Explorer.EXE - unable to locate component

  The application has failed to start because iertutil.dll was not found.  Re-installing the application may fix the problem.

  Because explorer.exe is not running, you will see only your background image /, but Ctrl-Alt-Delete will always bring up the Task Manager where you can maneuver around and replace the file.

  If the only problem with your system, it's that iertutil.dll is missing, you can replace the backup copy in the dllcache folder.  You can continue to obtain reviews iertutil.dll is absent, but just click OK for messages of recall as they pop up so you can continue working.

  One might think that you use the Task Manager, you can browse c:\windows\system32\dllcache and (after choosing to view all files) copy the iertutil.dll from there and then paste the iertutil.dll file in c:\windows\system32 where it belongs.  That actually works, but it seems that it does not work as you will get an hour glass stuck on the paste operation and perhaps wonder whether or not it has actually worked.

  To feel better replace the missing file, so you can actually see the file being copied and replaced... Task Manager, click file, new task and enter in the box (assuming that Windows is installed on your C drive):

  cmd

  Click OK to open a command prompt window and first make a copy of the original file (if it exists) by entering the following command:

  copy c:\windows\system32\iertutil.old c:\windows\system32\iertutil.dll

  That copies the file in progress if there is an and it will just complain if it is not a copy.

  We know that XP likes to keep the backup copies of critical system files in this folder:

  c:\Windows\System32\dllcache

  Knowing this, copy the backup copy of the missing file and replace the missing or suspicious file by using this command:

  Copy c:\windows\system32\dllcache\iertutil.dll c:\windows\system32

  Answered in the affirmative if invited to replace the existing file and then you should see a message that 1 file (s) has been copied.

  Type "exit" to close the command prompt window.

  Who will replace the missing or suspicious file and if that's all that's wrong with the system, Shut Down box Task Manager, you can choose to reboot your system and see how things are going.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• This application has failed to start because uncdms.dll was not found. Reinstalling the application may fix this problem. How can I fix it? Kathy

  This application has failed to start because uncdms.dll was not found.  Reinstalling the application may fix this problem.  How can I fix it?  Kathy

  The above explains the problem, my problem is I don't know what it's etymology comes.  Is this windows software, or software from Microsoft or both?  What is the name of the Application?  Help, please!  Thank you, Kathy

  Hi Kathy,

  1 have you made changes to your computer recently?

  2. When you get this error message?

  The uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.

  I suggest you to follow the steps and check if it helps.

  Method 1: Uninstall and reinstall Windows Desktop Search

  The uncdms.dll file is installed on your PC when you download the Windows Desktop Search application. Problems with this application's files can cause a missing uncdms.dll of error appears on your system.

  To uninstall the Windows Desktop Search from your computer, you must complete the following two tasks:

  Step 1: Remove Windows Desktop Search from the boot sequence

  To do this, follow the steps below:

  a. click on the start menu, click Run.

  (b) in the Open box, type msconfig and press ENTER.

  c. in the System Configuration Utility dialog box, click the Startup tab.

  d. search and clear the check box for any option that is related to Windows Desktop Search or uncdms.dll.

  e. restart your computer.

  Step 2: Uninstall Windows Desktop Search applications

  To uninstall the Windows Desktop Search using the Add / Remove Programs, perform the following steps:

  a. click the start menu and select Control Panel utility.

  b. double-click the icon Add / Remove programs.

  c. in the Add / Remove Programs, locate and select the Windows Desktop Search.

  d. press the button Delete.

  e. restart your computer.

  Method 2: I suggest do you an online scan and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• I get this error at startup: this application has failed to start because uncdms.dll was not found. Reinstalling the application may fix the problem

  I recently did a full recovery on my pc.  I'm running on Windows XP Pro.  Since the resumption, I get this error at startup: this application has failed to start because uncdms.dll was not found.  Reinstalling the application may fix the problem.  I don't find Windows Search in my Add/Remove programs.  How can I uninstall it?

  Hello
  The uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.

  Methods of resolution:
   
  I suggest you to download windows desktop search for additional and install.

   
  http://support.Microsoft.com/kb/940157

• It's on my screen and I don't know how to fix it... "this application has failed to start because AegisE5.dll was not found. Reinstalling the application may fix this problem. » __

  I have this message that appears constantly, and the only way to minimize it is to go to Task Manager. Here's what the message says... "this application has failed to start because AegisE5.dll was not found. Reinstalling the application may fix this problem. »

  How to re-install the AegisE5.dll?

  I have this message that appears constantly, and the only way to minimize it is to go to Task Manager. Here's what the message says... "this application has failed to start because AegisE5.dll was not found. Reinstalling the application may fix this problem. »

  How to re-install the AegisE5.dll?

  AegisE5.dll is linked to a network authentication system.  Because it is almost certainly only used with enterprise networks, you should communicate with your company, IT supports for assistance.

  If your computer does NOT connect to a corporate network:

  • What changes have been made recently to your network hardware/software?
  • You have a home network? Wired or wireless?
  • How is your computer connected to the Internet?

• I get thid message RUNDLL C;\windows\momowsi.dll is not found.

  original title: Please help!

  I get thid message RUNDLL C;\windows\momowsi.dll is not found.

  When a Google search for a results file name in no hits or suspicious hits, the answer is usually that the file in question is linked to the malicious software and your anti-malware application has deleted or quarantined file, but left to the Windows registry entry that tries to start the malicious software when you start your computer.

  First of all, download, install, update and run both of these free analysis tools:
  MalwareBytes AntiMalware
  SUPERAntiSpyware

  Do not run the scans at the same time.  They can take some time, so start an and then go for a non computer chore for awhile.

  If the scans does not solve the problem (and they can't, because the actual malware file has already been processed), then download and run Autoruns.  Click on the "Connection" tab and look in the column 'Image path' for the dll named in your error message.  If it is not displayed in the connection tab, click the "all" tab and use the file > search tool.  A characteristic of the search of Autoruns tool is that you must move the selection under the element line "found" before you "Find Next."

  Once you find the line with the file in question, either "delete" or (if you want to be safer) uncheck the box.  The latter prevents the line running, but you can reactivate it later by removing the check mark.

• installed age of empires won't get mess Granny2 dll is not found can help you

  installed age of empires won't get mess Granny2 dll is not found can help you

  Hello

  (1) what is the exact full error message?

  (2) what version of Age of Empires you referring?

  (3) have you downloaded the game from internet or installed using the disc?

  Try to reinstall the game.

  You can also ask your question in the framework of forum Games for Windows, please see the following link:

  http://forums.Xbox.com/GFW/technical_support/f/253.aspx

• I get the error c:\windows\system32\optionalfeatures.exe not found how to fix it

  I get the error c:\windows\system32\optionalfeatures.exe not found how to fix it

  I get the error c:\windows\system32\optionalfeatures.exe not found how to fix it

  Look herehttp://answers.microsoft.com/en-us/ie/forum/ie8-windows_7/when-i-access-internet-explorer-a-message-says/25bef4a4-bb01-46ac-bc68-11c81e7b55e7