I get the 490 error code when I try to install service pack 2 for windows vista. Anyone have any ideas on how to solve this problem? It is very common?

Similar Questions

• Why do I get 800736B 3 error code when you try to install service pack 1 through windows update in windows 7 64 bit?

  When windows update tries to install service pack 1, it fails with the error code 800736B 3. I am running Windows 7 professional 64-bit.

  I searched around these forums and others to find a solution and I'm afraid I'll have to re - install windows.

  So far I have tried:

  1. installation of the fix/update - Windows6 analysis tool. 1-KB947821-v10 - x 64

  2. I ran sfc/scannow in the administrator command prompt

  3 run the windows update utility for troubleshooting to solve all the problems

  4 remove all content from the C:\Windows\SoftwareDistribution; When I delete these files it redownloads the update, but on installation, you get about 65% of the way through and fails.

  5 disabled and re-enabled BITS

  6 downloaded the stand-alone manual update, installation failed the part of the way by

  Here is the reading for the Checksur.log

  =================================
  Preparation of control system was updated.
  Binary version 6.1.7601.21645
  Package Version 11.0
  2011-03-29 20:20

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store
  (f) CSI identity missing 0 x 00000000 wnetvsc.inf_31bf3856ad364e35_6.1.7600.16385_b3131d70e92cd346 appid
  (f) CSI identity missing 0 x 00000000 ws3cap.inf_31bf3856ad364e35_6.1.7600.16385_f2bcdebb5e0570d7 appid
  (f) CSI identity missing 0 x 00000000 wstorflt.inf_31bf3856ad364e35_6.1.7600.16385_1c88e04231fe3719 appid

  Summary:
  Seconds executed: 419
  Found 3 errors
  CSI identity lack Total count: 3
  Customer experience report downloaded successfully.  Thank you for your participation.  For more information, see the Microsoft Customer Experience Improvement Program on the Microsoft web site.

  Do a repair of Windows 7 installation and then install SP1.

  Windows 7 - repair facility
  http://www.SevenForums.com/tutorials/3413-repair-install.html

• 490 error code when you try to install service pack 2 with vista

  I have service pack 1 installed on my computer but I get an error message when you try to install service pack 2

  blztcj,
  Take a look at this article and try the steps inside:
  Troubleshooting Vista Service Pack installation issues

  Post back with the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• get the 490 error code when you try to install the update net framework

  0000490

  Hi harry_m,

  You are able to install some other updates of Windows on the computer?

  Please provide compete the error message you receive and also specify Windows Edition\Version you are running on the computer, for a better understanding of the issue.

  I suggest you try the following steps:

  Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Step 2: Run (Checksur.exe) system update readiness tool

  Follow the steps mentioned in the link (method 1) below, and then try again to install updates

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Try to install Service Pack 2 for Windows Vista and it says this "one or more system components that require the service pack are missing" need help?

  Try to install Service Pack 2 for Windows Vista and it says this "one or more system components that require the service pack are missing" need help?

  Hi, Mksethompson,

  What is your model of computer?

  Error message when you try to install Windows Vista Service Pack 2: "one or more system components that require the service pack are missing."

  http://support.Microsoft.com/kb/968279

  Dell issue

  http://en.community.Dell.com/support-forums/software-OS/f/3524/t/19278096.aspx

• I get the following error code when I try to install the important updates: "Windows Update_00000646" responding updates in question are five 2007 updates Microsoft Office System: __KB972363__KB973709__KB972581__KB974234__KB974801___

  I have download the updates according to the needs and the installation process begins. However, once finished, I get a message saying "some updates were not installed." I click "try again", but the same thing happens. Each new update is installed except the five listed above. They are all updated for 2007 Office System.
  NY helps solve this problem needs to be appreciated.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• 80070057 error code when you try to install Service Pack 1

  I try to install Vista Service Pack 1 and when I try to install it either online or manually by downloading the entire 400 + M file, it will start and show 10 minutes later the installation failed with code 80070057 error and.  I can't find this code on a Microsoft Web site reference.  Any idea what's going on?

  Thank you

  A long shot, but try it (even if it's for Windows Server 2008). Stop mentioned serivce and run Service Pack 1 Setup.

• I get an error 'Windows Setup is not responding' when I try to install Service Pack 2 for Windows XP.

  Recovery disc to clean the computer.  Discoveries from my software was 2004 I download all 'service pack' and update to restore my computer to where it was.  SP1a downloaded but cannot download SP2.  Now it says "Windows Installer does not" and "run a DLL as an app".  How can I fix without having to pay $ 39.99 for an online business?  There must be a way to solve this problem, so I can use or re - download the "Windows Installer"

  original title: used the recovery disk, downloaded SP1, but cannot download sp2 as error "the installer of windows no longer - run a DLL as an app.»  How can I fix it?

  You can download the Service Pack, a complete package and install in offline mode.  Since you already SP1A, you can go to SP3 directly, bypassing the SP2.  Ingore the text on the following links which indicate that what follows is for "Professionals" and "Network Installation" and download SP3 from the following link and install it after it downloads.  You can download on another computer if you want to move to your current computer:

  XP Service Pack 3:
    <>http://www.Microsoft.com/en-US/Download/details.aspx?ID=24 >

  and in case you want really to Service Pack 2, look here:
     <>http://www.Microsoft.com/en-US/Download/details.aspx?ID=28 >

  HTH,
  JW

• get the 0xC004D301 error code when you try to install streets &amp; trips 2013

  last week I did an automatic update of windows & shutdown.  The computer would not come when I went to use it the next day.  Ended up doing a refresh and found that none of the programs would work more.  I have to reinstall so everything manually.  Tried to reinstall "streets and trips 2013", but will not be installed.  gives me the error code shown above.  What I do with him now?  (by-the-way, I hate windows 8)

  Hello

  The question you posted would be better suited in Microsoft Highway and Streets & Trips or MapPoint forums:

  http://social.Microsoft.com/forums/en-us/home?Forum=streetsandtrips

• I get the 737D error code when you try to install the update for SQL Server 2005 Service Pack 3 (KB970892) security. Any suggestions or should I not worry about installing this?

  I use Windows XP Home Edition Version 2002 Service Pack 3.

  Here is a link to a thread on the MSDN forums dealing with this problem and a possible solution.  Thread  Also, if you run law or another program directly using SQL, you can try to uninstall the program, run the update, then reinstall the program.  If you have tried only to install this through Windows Update you can want to download it and run it directly from your desktop.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Server did not respond error when you try to install Service Pack 1 for Windows XP.

  I had to do a restore system with xp home edition. Trying to update from sp1 which has been downloaded to the thumb drive and sent to my office at the top of the page. starts to load, and then tells me that the server did not respond. I am connected

  You do not start with a service pack earlier and go to the top. You only download the latest service pack. The latest service pack for Windows XP Home Edition is Service Pack 3.

  Go to Windows Update and see if you can find it there.

  If this isn't the case, then you can manually download it here:

  http://www.Microsoft.com/download/en/details.aspx?ID=25129

  It is a CD image file that requires you to burn to a CD or use a virtual CD/DVD software like Virtual CloneDrive. This allows you to open the ISO file as if it was a real CD inserted into your DVD drive. All you have to do is double-click the ISO file, once you have installed this program. Run the configuration file.

  http://www.SlySoft.com/en/Virtual-CloneDrive.html

• Windows 7 - I get the 66A error code when I try to install the updates

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I don't know what to do so I'll appreciate all the help I can get

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Please see the following thread:

  http://social.answers.Microsoft.com/forums/en/vistawu/thread/1307e399-8997-41c4-9D3B-24f872425148

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• I get the 737D error code when you try to install the update for SQL Server 2005 Service Pack 3 (KB970892) security. Any suggestions or should I not worry about installing this? I'm using Vista Home premium.

  error messages

  Might be better to post here: SQL Server Setup & Upgrade
  http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/
  or
  (5bc30920-5d3c-4a4e-8672-ff97b0e9252f) http://social.msdn.microsoft.com/Search/en-US/?query=737D%20&rq=meta:Search.MSForums.ForumID & rn = SQL + Server + mounting + % 26 + Upgrade + Forum TaurArian [MVP] 2005-2010 - Update Services

• Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

    I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

    Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

    OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

  keimanzero,

  Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
  First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

  Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

  Secondly, I suggest that you run the File Checker system while in the same clean boot state.
  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the field search programs and files .
  2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
     If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
     sfc/scannow

  When the analysis is complete, test to see if the problems facing the system have been resolved.

  If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

  Expert MowGreen Windows IT Pro - consumer safety

• Get the 8024401c error code when you try to update.

  Get the 8024401c error code when you try to update. Tried various fixes - neither works. The message also says that I have installed no update, i.e. no history of update that is false. Any ideas.

  Concerning
   
  Original title: run Windows 8

  Solved the problem. Changed the configuration of updates of ' install updates automatically (recommended) to "check and download (do not install). Updates are now being downloaded and my choice to install.

  Thanks for your help, Jose Antonio, I learned how to scan my computer now!
  Regards Gary