I get the blue screen how can I get a recovery for my HP laptop cd?

original title: I get the BSD how can I get a recovery for my HP laptop cd?

Unable to start Vista, cannot restore the drive.

Advertisement

Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

There is no Vista free download legal available.

http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=au

Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

Normally, they do this for a cost of $ small.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

Normally, you have to press F10 or F11 at startup to start the recovery process...

Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

They will tell you how to do this.

Every computer manufacturer has their own way of making recovery disk/s.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.

There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

http://support.Microsoft.com/default.aspx/KB/918884

MS advice on the conduct of clean install.

http://www.theeldergeekvista.com/vista_clean_installation.htm

A tutorial on the use of a clean install

http://www.winsupersite.com/showcase/winvista_install_03.asp

Super Guide Windows Vista Installation

After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > find the latest Vista drivers for it > download/install the

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • After downloading an application I see is no longer the splash screen, how can I get rid of the app and restore my pc when I do not see the screen

    After downloading an application I see is no longer the splash screen, how can I get rid of the app and restore my pc when I don't see the screen, please help

    Hello

    Do a system restore to a date before you had this problem:

    "How to make a restore of the system in Windows 8 and 8.1" . "

    http://www.eightforums.com/tutorials/4692-System-Restore-how-do-Windows-8-a.html

    Follow this path to a Safe Mode system restore:

    "5 ways to boot mode safe Windows 8 & Windows 8.1"

    http://www.7tutorials.com/5-ways-boot-safe-mode-Windows-8-Windows-81

    See you soon.

  • My iPhone accedentely fall after I start to be verticall line on the color screen how can fix this

    My iPhone accedentely fall after I start to be verticall line on the color screen how can fix this

    You will need to have the device examined by an Apple store or Apple authorized service provider.  He may ask you to replace your device.

  • Blond hair is originally edges of pixel on the green screen, how can I fix?

    So I get really good with my key skills. Unfortunately in this video here (attached screenshot) can't seem to soften or stifle the blond hair and remove these pixelated edges... I searched all over the web only to find tutorials in After Effects... in any case I can fix this without having to use AE?

    334c6ffa965d0667067b51caa3f2e757.jpg

    Hey Danny,

    Here are pictures of our current set up. I'll upload the video soon as well.

    Thanks for the photos!

    I use a T5i DSLR rebel

    AT ISO 400

    100 shutter

    Opening to 5.0

    An SLR digital H.264 shooting is one of the poorest formats for shooting for the composition of the green screen. Sorry to be the bearer of bad news.

    I would recommend shooting with a camera that can record to a highest intra-image 10 bits of quality, like ProRes format. Many people use less expensive DSLR cameras (like yours) and AJA KiPro or Atomos Ninja HDMI data recorders to get this higher quality videos 10bits, ideal for the entry. They are quite affordable for what they do.

    We ensured that the lights are some 45 degrees angles of tripod of our DSLR, then we have the key "light" following the DSLR. With a transom for product photos and unboxing videos.

    You don't necessarily want ceiling for product, which can introduce hard shadows to talent. Key and fill should take care of most of the product lighting. However, a small 300 watt 'kicker' can be called for these lighting products. You want at least a fire behind the talent (called "Backlight"), which is usually directly behind or slightly eccentric talent. Aim the shoulders and the back of the head by focusing light, then it flood a bit. Adjustment of barn doors to avoid any excess of light entering the camera lens. I have this light almost half to 75 percent of the strength of the fill light.

    See this configuration of Jeff Foster:

    The subject is about 2 feet away from the backdrop. (We painted the green wall to reduce to a minimum the tripods and wrinkles.

    First of all, in my opinion, that this room is far too small for what you want to do.

    Talent of lighting
    It seems that you are more informed in front. Too fill key and not enough. You don't want three lights, try it with two 45 degree angles. Make sure you use the less powerful light for charging. Add broadcast if the lights are of the same power (which resembles what you have). I find this filling works best when he is about 65-70% as much strength as the key.

    Placement of talent vs the green screen
    I prefer to put at least 10 feet between the talent and the green screen (or bottom of any type) so that you can 'cut' any bright talent of the background and I can fly a backlight behind the talent. Remember you want light talent separately from the green screen. For example, if it was a VFX shot, you wish to turn it on dramatically so that it will blend with the background. In a demonstration of product, of course, it is not as important.

    Green screen lighting
    I can understand why you would want to reduce the installation program by painting the green wall, but I think're missing you an important point. The wall must be turned on too! And quite differently on how you would light of talent. If you need more space for this, as well. He needs to be very evenly lit with zero modeling. I like to use very broad and diffuse sources to that effect. A couple of big lights or soft lights work well for this. Use a directional light meter to make sure that you have all the hot points (see the illustration above for the "lights of the screen").

    You may not space or gear to shoot like you want, but I wanted you to know how I would have turned on this shot. You can do a little more research on how you can configure your studio to get better once you get your shot in Premiere Pro.

    Thank you
    Kevin

  • While in the application and do nothing for 15-20 sec system going bak to the login screen - how can I stop this?

    I connect and use any program and after 15-20 seconds of inactivity he sends me bak to login in the screen and I have to relog

    Hello

    See if that helps you.

    Do it in the opposite direction and uncheck the box "on RESUME, protect by password" and change the wait time for the screen saver to cut if you want to

    http://www.Lockergnome.com/Windows/2007/03/13/password-protected-screensaver-in-Vista/

    See you soon.

  • How can I perform a recovery system on a laptop Windows 8?

    I found this video that details the procedure to perform a system recovery in Windows 8 and thought that I'd share it.

    I hope this video helps some who may have questions about a recovery in Windows 8.

  • How to fix the blue screen?

    original title; How to fix blue screen of death?

    our computer says fatal system error and I don't know how to fix it.

    I tried all the suggested in the forums, I met online, but they didn't work [including restoration, safemode, last good known, etc.]
    can you help me please?
    [We have Windows Vista and I don't seriously how it happened since I'm not the one who used it last person admitted who did fact-_-]
    I would appreciate your help. Thank you

    Hello

    What is the BCCode or stop the blue screen Code?

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    -------------------------------------------------------------------------

    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    (also Windows 7)
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    ===========================================================

    Check out these utilities to see if information may be collected:

    It is an excellent tool for displaying the blue screen error information

    -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
    and displays information about all accidents of a table.
    http://www.NirSoft.NET/utils/blue_screen_view.html

    -------------

    MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
    time of the BSOD to provide more information about the possible cause - see TIP.

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
    Set it for a bit before and after the time of the BSOD.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    ------------

    AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
    application goes down has occurred in your system. The information breaks down is extracted from the .wer
    the files created by the Windows Error Reporting (WER) of the operating system component of each
    time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
    text/html/csv/xml file.
    http://www.NirSoft.NET/utils/app_crash_view.html

    I hope this helps.

  • Driver atapi.sys - address f76fd5f9 of the blue screen IRQL not less or equal "stop 0x000000D1"

    I have a computer shape I work which is formatted, but windows recovery is here.  I get a blue screen when you try to retrieve that computer indicating"Atapi.sys address F76FD5F9 Driver IRQL not less or equivalent.  The stop codes are 0x000000D1 (0x005300cc, 0 x 00000007, 0 x 00000000, 0xF76FD5F9, I tried everything reformat this computer but nothing works.)  I get just the blue screen.  Can anyone help?

    ginger957

    Hello ginger957,

    ATAPI.sys is the driver file for the drivers of storage system. It may be the hard disk that fails to give the stop errors. If you try another hard drive or upgrade the hard drive on another computer which results do you see?

  • When I click on an image or map that is Kijiji real estate pages, open Firefox all crunched on the right side of the page. How can I fix this?

    When I click on an image or map that is Kijiji real estate pages, open Firefox all crunched on the right side of the page. How can I fix this?
    For example, I discovered an apartment ad that has various attached photos. It said click on the images to see an enlarged version. FF opens the page however the majority of the page is white and the image seems to be pushed on the right side of the page and watch as if it were bundled up against the right side shows is not the whole picture.
    What can I do to fix this?

    Thanks Cor - el,
    Just set the police minimum votes to zero, did the trick. However, I also appreciate other suggestions that I'm following now. Non-strabisme already installed. A little more difficult to find this file user.js. It any suggestions?
    Thanks again for your great help.
    See you soon,.
    Robert

  • I often get frequent blue screens on internet sites. Blue screen too fast for me to record specific error message. How can I put an end to the blue screen to get the error message?

    frequent blue screens often to internet sites.  Blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

    en blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

    If your computer is restarted when the BSOD appears, then you must change the by default for what to do in case of system error. It is easy to do, but takes a lot of mouse clicks to get there:

    Start | Control Panel | System | Advanced system settings (need for credentials for the administrator to spend here |) Advanced | Startup and recovery / settings.

    On this screen, uncheck the box under system failure that says automatically restart. The next time the BSOD appears, your computer will not do anything else until you press the reset button, so you'll have all the time you need to read and copy the error codes. Paste here, verbatim, and someone should be able to point in the right direction.

    ``````~~~~`````

    In the control panel choose reports on problems and Solutions (problem of type in the START search box), go to historical problem, right-click your error and choose check for the Solution. You can also examine the details.

    In administrative tools, choose the reliability and performance monitor and click on MonitoringTools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date. See if your plant has started to happen after you installed or uninstalled something.

    It may be useful to eliminate equipment defects

    Type of memory in the search box of start and choose Memory diagnosis

    In a command prompt (type command in the start search box then right click and choose Run as administrator) type

    CHKDSK c: /r

    If you have more than one drive replace C: with the other drive letters.

    Search for corrupted files by typing at the command prompt

    sfc/scannow

    You can clean boot troubleshooting http://support.microsoft.com/kb/331796

  • How can I get rid of the blue screen error?

    Original title: Windows Vista Start does not

    Hello
    I have Windows Vista Home Premium, and I've had it for 5 years now (2006-) the problem is that I don't know what happened, but when it restarts, I have two options;

    Startup Startup Repair (recommended)
    Start Windows normally

    When I choose "Start Windows normally", a blue screen appears with an error message and disappears quickly, leading me to restart my Vista again. However, when I select Launch Startup Repair tool, it takes a while and after a bit, it ask if I want to send the error to microsoft (recommended) and I choose Yes, and it takes a little more time to look for a solution. Finally, a list of appropriate actions appear;

    Startup Repair; I tried this 8 times now, and he cannot find a solution, leading me to reboot once more.
    System restore; I tried ALL the dates of the restoration, and none of them worked. I got an error saying: it cannot restore.
    Restore the computer; 1. I don't have a backup drive (it's a shame, I know) and 2. I don't want back up and lose all my files.
    Windows Memory Diagnostic tools; I checked all hardware error, and none have been found.
    Command prompt; I don't know what to do with it.

    If someone can PLEASE help me, I would be VERY grateful. I have very old memories and photos on this computer and I don't want to lose these. I am begging for someone to help me, and my last priority would be to forget all these photos and files and move: (.) Oh and I tried running safe mode, by pressing F8 while the computer restarts and I've highlighted Mode safe mode with networking, but it gives a quick overview of a blue screen just and hangs on reboot. Please help me on the procedure to follow for the good of my IMPORTANT files and memories.

    Thank you, in advance.

    Hi AffanX,

    Method 1: Try to disable automatic reboot in the menu start-up advanced options, and then try to capture the blue screen error message, see the link below:

    Advanced-Startup-options-including-safe-mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode 

    Method 2: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

    If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

    After disconnecting all external devices, run the Startup Repair

    Windows Vista or Windows 7 unbootable and the Startup Repair tool does not resolve the problem
    http://support.Microsoft.com/kb/934540

    You can see the steps below for more information

    Resolve stop (blue screen) error in Windows 7

    http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

    (Article above applies to Windows Vista)

  • How can I stop the blue screen error caused by sffp_sd.sys

    Since the middle of the latest version of windows aprils has updated that I regularly get the blue screen... The last was 26/05/12 16:30...

    DRIVER_IRQL_NOT_LESS_OR_EQUAL

    STOP: 0X000000D1 (0X00000002, 0X00000000, 0X00000008, 0X914E8774)

    BTHUSB Device bthport.sys - 914E8774 address, base at 914E5000, Datestamp 4db03738

    Hello

    BTHUSB Device bthport.sys and sffp_sd.sys are the two components of Windows that means something else led him into
    Fault. First thing I would do is update the BlueTooth drivers. Check with the system manufacturer (mother's support-
    the Board Maker for systems (custom), their documentation online and drivers and ask in their forums (if any)
    known issues and/or / the real peripheral manufacturer support site. (See driver update methods in the next
    message.)

    ===============================================================================

    Pick up the pieces after a computer crash
    http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
    for the office or in the Documents folder and download them from there.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive download collected files and after shot/screenshot.
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    ==================================================================

    BCCode: D1 0x000000D1

    Think video drivers especially if it may be others. Refer to the section of driver in my credits
    methods of troubleshooting blue screen below. BIOS, chipset of low level drivers and
    antispyway/antivirus/security programs can also cause this. Check the resolution of the problems and
    When you arrive at the driver and tests of memory sections do reference to generic methods in following
    message and then back to the if necessary troubleshooting tool.

    BCCode: D1 0x000000D1

    Cause

    A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.

    This bug check is usually caused by drivers who used a wrong address.

    If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:

    • The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
    • The function call was made to a function in another pilot, and that this driver has been unloaded.
    • The function was called by using a function pointer that was an invalid pointer.


    BCCode: d1 0x000000d1<-- read="" this="">
    * 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-

    =========================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------
    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free

    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do without if needed fail or the Vista DVD or recovery command prompt mode
    Options if your system was installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Computer automatically restarts and displays the blue screen. How can I fix it?

    original title: blue screen problem

    Hi, my computer has been restaring, and a blue screen appears.

    I'm not so technical by nature, so I hope I can get a few step by step for how to solve this problem-if I can.

    The message that I could find on the problem (s) are present:

    Problemsignature

    Problem event name: BlueScreen

    The system version: 6.0.6002.2.2.0.768.3

    Local ID: 1044

    Files that describe the problem

    More information about the problem:

    Hey Mirjam Irene,

    1. What is the error message on blue screen?

    2. did you of recent changes on the computer?

    3 when was the last time it was working fine?

    4. do you have security software installed on the computer?

    5. once the computer is restarted and the blue screen occurs?

    Check if the problem persists in the safe mode and after back with the results.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Restart the computer to return to normal mode.

    If the problem persists in safe mode, and then see the Microsoft article below and try the steps mentioned, check if it helps.

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly

    http://support.Microsoft.com/kb/958233

     

    If the previous step fails, then check the event viewer for the cause of blue screen and message comes back with the details.

    What are the information contained in the logs of the event (Event Viewer)?

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

    I hope this helps!

    Halima S - Microsoft technical support.

  • my screen on the side. How can I get it back to normal?

    original title: my son did something on my screen, and now it's the display on the side. How can I get it back to normal?

    My son did something on my screen, and now it's the display on the side.  How can I get it back to normal?

    Hello

    I cnanot be being specific, because I don't know your OS or the graphics card, but I can say that this can probably be corrected by control panel - display - advanced settings, and then click the tab for your graphics card. Then, you will also need to run a utility of this tab to access options for screen rotation.

    Please mark this as useful or response if applicable.

    Tricky

  • Recent upgrades: KB2419640, KB976902, KB890803 when installed I can't start and get the blue screen.

    After that the installation of upgrades KB2419640, KB976902, KB890803 I'm unable to boot.  I get the blue screen.  I used chkdsk, memtest etc. No problem.  I disabled the upgrades to prevent settling.   I'm not comfortabel thereby.  Is there a solution?

    You are able to boot mode safe? If you can, do and run System Restore:

    To access the system recovery environment in Windows 7, simply start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. You will see a new option 'Safe Mode', select this option and press 'Enter' on your keyboard.

    System Restore -Windows 7 features - Microsoft Windows

    After you're booted in Normal mode, click Start, all programs > Windows Update

    Check for updates, now updates you're experience problems with, each of them right click and click "hide update".

    If they are updated driver in particular, do not install them, hide them instead, any update of the driver offered, instead of this download directly from the manufacturers Web site.

    HowManage , Configure and troubleshoot Windows updates releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

Maybe you are looking for