I get the following error every time a new window opens: xmlnode.getelementsbytagname ("id") [0] .firstchild is null - 1 can you please help?

I'm using XP Home Edition. This happens in a Javascript application window whenever a new window opens in FF. I don't get this error in IE. I can open other tabs in FF and they are very good, just not other windows. Thank you very much for any help!

This has happened

Each time Firefox opened

You have this problem when running in Firefox SafeMode?
http://support.Mozilla.com/en-us/KB/safe+mode
Do not choose anything at the moment, just use 'continue in safe mode.

If this is not the case, see this:
http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+theme...

Tags: Firefox

Similar Questions

  • I get the certificate error every time.

    To the right, when I try to access AKO, army knowledge online (www.us.army.mil) I get the certificate error every time.  Not only I got one when I first on the site, but also when I try to access my mail from the army and other features of the site.  I checked the settings of date and time, and they are all correct.  Also, the certification is valid until 2012.  Any help would be greatly appreciated. P.S. I am using XP

    It is simply because Microsoft does not charge the military by default root CA certificates.  All you need to do is load the certificates on your computer.  To do this, the instructions are on this Web site:

    <>http://dodpki.c3pki.Chamb.DISA.mil/rootca.html >

    HTH,
    JW

  • I can't run my ststem update... I get the tgis error every time. [Error number: 0x800A0046]

    I can not also run my system restore... Have I not a bug... I have several anti virus installed, but I still hacked or something similar?

    Hi jeff010407,
     
    Follow the steps listed in this article to resolve the problem:
  • I get the 403 errors EVERY time I try to download something.

    I was just looking for mods for Oblivion on tesnexus when I suddenly could not download anything more. I had been downloading things on a daily basis, but that changes nothing that drastically. I went to other sites and discovered that I could not download anything here either. I tried my cache and cookies without result, history of compensation. I tried to disable my antivirus plugins and once again, nothing. I tried to reset my computer, but it was another failure. I tried to use IE, and still I could not download the files. I worked hard for Oblivion mod, but all this effort seems to be for nothing, since the only option I have left is to format my hard drive and start over... I desperately need help so it does not come to that. Help, please!

    After some more googling, I found that it is a forbidden access error.

    This site details some of the solutions you can try:

    http://www.symatech.NET/error-403

    Personally, I just use the built in trouble-free download manager and a minus the module, I hope this helps.

    I did use for mass use downloaders or multiple connections downloaders, although only after experiencing several corrupt files, I chose and just use the built in Download Manager.

    Ideally, this seems more a question for the third-party programmers of DLA, although I haven't found others having this problem via google.

  • Every time I close my laptop and he goes to sleep, when I reopen it the lid it restarts and I get the following error.

    Hello

    Every time I close my laptop and he goes to sleep, when I reopen it the lid it restarts and I get the following error. Can you please help? Thank you!!!

    Signature of the problem:
    Problem event name: BlueScreen
    OS version: 6.1.7601.2.1.0.768.3
    Locale ID: 1033

    More information about the problem:
    BCCode: 9f
    BCP1: 0000000000000003
    BCP2: FFFFFA8004AC8A10
    BCP3: FFFFF80004053518
    BCP4: FFFFFA8009274DC0
    OS version: 6_1_7601
    Service Pack: 1_0
    Product: 768_1

    Files helping to describe the problem:
    C:\WINDOWS\Minidump\092812-30045-01.dmp
    C:\Users\Kevins\AppData\Local\Temp\WER-78078-0.SysData.XML

    The minidump files showed a DRIVER_POWER_STATE_FAILURE (9f) persistent stop error that seems to be caused by the Netwsw00.sys:

    BUCKET_ID: X64_0x9F_3_Netwsw00_IMAGE_pci.sys

    The Netwsw00.sys, which is dated March 12, 2012 is a driver for Intel wireless network adapter.

    Even if it's a fairly recent version of the driver I would suggest trying the following update utility from Intel and of whether there is a newer version available and, if so, install the:

    http://www.Intel.com/p/en_US/support/detect?IID=dc_iduu

  • I can't clear the permission and get the following error message: failed to clear approval. Please try again after some time.

    I can't clear the permission and get the following error message:

    Cannot clear permission. Please try again after some time.

    I want to be able to allow so I can transfer files to my torchlight Nook more

    Macintosh:

    1. exit the Adobe Digital Editions software.
    2. Navigate to / Users / / Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash.
      If you use 10.7, see library access hidden files. Mac OS 10.7 and later.
    3. Open Adobe Digital Editions and reauthorize.

    Windows:

    1. Close all applications.
    2. Click Start > run.
    3. Open, type regedit in the text box and press ENTER. The Registry Editor opens.
    4. In the left pane of the registry editor, locate the following registry key: HKEY_CURRENT_USER\Software\Adobe\Adept
    5. Select the key of the follower.
    6. Choose file > export.
    7. In the export registry file dialog box, select the branch selected under export range. Enter a name and location for the backup registry key, and then click Save.
    8. Right click on the key to the follower, and then choose Remove.
    9. In the dialog box confirm the key deletion, click OK.
    10. Close the registry editor.
    11. Open Adobe Digital Editions and reauthorize.
  • I run pc photoshop CS6 on my windows 7 (mac). I have stupidly? the Applications Adobe Manager to update all my Adobe apps. Since that time I now get the following error message when you try to create the Contact Sheet II in my SP6 or 64 PS5.5

    Greetings


    I run Photoshop CS6 on my windows 7 Ultimate (MacPro 2008 via Bootcamp). 12 GB of ram, 512 on the video card. A lot of disk space. None of the questions of knowledge, viruses, malware, etc.


    I have stupidly? the Applications Adobe Manager to update all my Adobe apps. Since that time I now get the following error message when you try to create the Contact Sheet II in any of my SP6 or PS5.5 64-bit or 32-bit versions. «Cold is not complete the plug of command because Photoshop was unable to locate the plugin JavaScript» Re, I installed the latest update, but no change. My installation is built on CS4 extended, then with a version Standard 5, 5.5 and 6 facilities upgrade.


    The Contact Sheet function was working well, until I ran the updates.


    I'm in a bad place, as I am in the middle of multiple projects, everything I need to create Contacts for.  I thank any help or give advice on how to fix this...


    Help, please!

    Try to run Photoshop with the SHIFT key is pressed and skip loading part tird plug-in and try to use the Board contact II.  A version of plug-ins from third parties have been known to break Photoshop Scrippting.

  • Update could not get the following error U44M1I210.  Tried several times on 2 Mac running Yosemite

    Try to update CC 2015 without success.  Update could not get the following error U44M1I210.  Tried several times on 2 Mac running Yosemite.  Any ideas?

    U44... Update error http://forums.adobe.com/thread/1289956 can help

    -U44 more... discussion http://forums.adobe.com/thread/1275963

    -http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

    -http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html

  • I'm trying to access a wireless network with the password provided for me. I get the following error message

    I'm trying to access a wireless network with the password provided for me. I get the following error message: "the network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 characters ascii or hexadecimal 10 or 26. "what does this error message mean and how do I address so that I can access the wireless network?

    I use XP Professional with service pack 3. I get this error message every other time I try to log in to a protected wireless network security. I used to not get this message; but, now, it may be impossible, sometimes to call all wireless providers when I might only need for a short period or after hours service opening.

    In addition, it is my computer that requires the network password to be different, not the provider of wireless. A password is given to me who works for other users, but my computer won't let me use it.

    Hello

    I suggest you to visit these links and check if it helps:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/the-network-password-needs-to-be-40-bits-or-104/f3fdc3ee-CB40-4107-A632-082093dcdcb8

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/need-to-connect-to-home-wireless-network-Windows/5bf37a22-cc42-4a0f-9d15-83e780f00123

    It will be useful.

  • On startup, I get the following error: spoolsv.exe - Application error

    On startup, I get the following error:
    Spoolsv.exe - Application error
    The instruction at "0 x 10002837" referenced memory at "0x00000000".  The memory could not be "written".

    Then the print subsystem stops.  Windows update service keeps control and verification.  I let go 20 hours and it is never resolved.  I can't open some applications requiring printers.  Help please.

    Bill

    Hello DragonBill,

    Thank you for visiting the website of Microsoft Windows Vista Community.

    Regarding your question, the most common cause of the error is an abundance of. SHD and. Files in the directory of spool SPL.  These files are created by the spooler to save data delayed a print job.  The. SPL file contains the drawing commands and the. SHD file contains information of working parameters the print job.

    To try to correct the application spoolsv.exe error, you must remove these files from the system.  To do this, perform the following steps on your Windows Vista computer:

    1. open the Control Panel, select Classic view, select Administrative Tools and then select Services .

    2. in the Services management console, find the Spooler service, right-click on it and select stop.

    3. then open the folder C:\Windows\System32\Spool\Printers .  (Here, we assume that your Windows is installed in the default C:\Windows folder)

    4. delete all the . SHD and SPL files in this folder.

    5. then open the TMP folder and delete all the old, unused files in this folder.

    6. Finally, restart the spooler from the Services management console service.

    Important note: If you are unable to delete the files in Normal Mode, then you may have to restart your computer in Mode safe to delete files.  To start your PC in safe mode, press F8 when the system restarts, and then select the Mode option safe mode from the Windows Advanced Options Menu.

    If deleting the files do not straighten out the problem, you must perform a system restore and restore your system to the times before when the error started appearing on your computer.  A.m. run the restoration of the system, open Start, all programs, Accessories, System Tools , and then select the System restore option.  On the Welcome to system restore screen, select the restore my computer to a time option earlier and select Next.  In the Select Restore Point screen, select the date that represents the restore point to which you want to restore your computer back, and then select Next.  Finally, check and then click Next again to confirm your restore point and restore of the system.  Restart your computer when you are prompted, and then press OK to close the end of System Restore screen.

    It is important that you know that application errors can also occur because of virus or spyware infections.  In fact, the Spoolsv.exe process is also a known backdoor vulnerability which can be planted on your computer for malicious purposes by an attacker.  Therefore, if you see an unknown process running on your system, you must take appropriate measures to remove them.

    Let us know if these steps solve your problem.  I hope the information is useful.

    Kind regards

    Anthony
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I get the following error code 80070bc9 when you try to do window upsdates

    I get the following error code 80070BC9 when you try to do a Windows Update. All of my updates have failed in the last three months and most have failed in the last six months. I found this problem when you try to install Itunes and received the error HRESLUT:0x8007054F. After researching this error, I was sharp may receive updates. Help, please.

    Hello Kristen,

    Follow the steps mentioned below:

    Step 1:

    Temporarily disable or uninstall the security software

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Step 2:

    Reset components Windows Update the link below:

    How to reset the Windows Update components
    http://support.Microsoft.com/kb/971058

    Note: Click on run in the file download dialog box and follow the steps described in the fix it Wizard.

    Hope this helps

  • User profile service: when I click on my user profile, I get the following error messages: the user profile service service failed to connect. User profile cannot be loaded.

    When I click on my user profile, I get the following error messages: the user profile service service failed to connect. User profile cannot be loaded.

    Isn't that one profile, the administrator and another account are ok

    ·                        Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not work:

    ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    See if the information in the above tutorial will help you.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/kb/947215#letmefixit

    Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    Difficulty of a corrupted user profile

    After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/kb/947242

    A temporary profile is loaded after you connect to a Windows Vista-based system

    See you soon.

    Mick Murphy - Microsoft partner

  • I try to upgrade to Windows 10 and downloading still failing. I get the following error message: 802400B,.

    I try to upgrade to Windows 10 and downloading still failing. I get the following error message: 802400B, which means that it can not read one of the files required to download (update manifest). The recommended windows fix did not work. What should I do? Thanks for any suggestions you may have.

    You can try the upgrade manually:

    Task of pre-required

    When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

    then

    then

    • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
    • Reboot several times, and then try again.
    • Disable the general USB peripherals (for example - smart card reader).
    • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
    • Perform a clean boot, restart, and then try again.
    • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
    • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
    • If this does not work, try using the. ISO file to upgrade if possible.
    • If you are connected to a domain, go to a local account.
    • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
  • I'm trying to upgrade from Photoshop CS5 12.0 to CS12.04, both x 64.  I get the following error message:

    I'm trying to upgrade from Photoshop CS5 12.0 to CS12.04, both x 64.  I get the following error message:

    Adobe Bridge CS5 update 4.0.5

    There was an error downloading this update. Quit and try again later.

    CS5 Adobe Extension Manager 5.0 updated

    There was an error downloading this update. Quit and try again later.

    Update of Photoshop to Photoshop CS5 12.0.4

    There was an error downloading this update. Quit and try again later.

    Photoshop Camera Raw 6.7 update

    There was an error downloading this update. Quit and try again later.

    I tried to upgrade to times without success.  How can I upgrade properly?

    Earl M. Mortensen

    Settle in the right forum.

  • I get the following errors 2 media loading 1) error: file could not be played &amp; 2) html5: badly encoded video. What should I do to fix this?

    For example, I go to http://jwplayer.com and when I click to see the video I get the following error:
    "Error loading of media: file could not be played.

    Now for the other mistake... I go to a site where the video looks to his will start and it turns white with the error "html5: badly encoded video."

    I went to http://detectmybrowser.com and in the section check the HTML5 video webm and h264 are red (which means that I don't have these plugins that I guess)

    Then... How to fix this?

    Maybe you need this:
    Windows Media Feature Pack for Windows 7 N and Windows 7 KN:

Maybe you are looking for

  • Change the screen of welcome/opening of session start on Satellite L500

    Hi - just bought laptop for my son (the Satellite L500 - 19 X with Win7 Home) preloaded and getting ready for Christmas. The logon screen is the Toshiba logo with a white background. This makes shaded police fall very hard to read which is used for u

  • How do you put the Journe Touch to sleep?

    The documentation with the machine is hopeless, but it is another question. What I would do is to boycott the thing sleep, because otherwise you must close completely and it takes FOREVER to restart (despite BS in material claiming that it is "activa

  • Any ideas where someone could find NTBACKUP. NSI

    Sorry for the breakdown, but I'm new on this forum and have spent an hour through the site of Toshiba Worldwide looking for a forum for users in the United States. Google does a great job of finding this "Toshiba computer Forum" but try to register a

  • BT's unknown devices in Device Manager

    Hello I saw some unknown bluetooth devices in my device manager. All my drivers are up to date. Missing features- Spoiler (Highlight to read) Driver Bluetooth installed- Spoiler (Highlight to read) Thank you HDash_Tech

  • How to apply the touch screen for Samsung SyncMaster 204BM

    Original title: Samsung SyncMaster 204BM I want to apply the touch screen and the narrative and I want to know if this screen and Iam from the computer using portable Thank you Nora