I get the following error in Outlook Express when using SSL

"You are connected to the server using a security certificate that could not be verified."

The certificate CN name does not match the passed value.

You want to continue using this server? »

Y/N

If I say 'Yes', everything works fine, I can receive and send e-mails.
I use windows XP with Outlook Express 6 (6.00.2900.5512).

I have an e-mail address that ends with @yahoo.ie
Incoming mail server is set to pop.mail.yahoo.ie and smtp.mail.yahoo.ie free
SSL is the required value for 465 leaving and entering 995.

What could be the problem and the solution?

Kind regards
Kiran.

Just a minor correction.  To use Internet Explorer or control panel | Internet options.  He can't go to tools | Internet in OE options.

Steve

Tags: Windows

Similar Questions

  • When I try to send emails via outlook express, I get the following error message:

    When I try to send and email using Outlook Express, I get the following error message:

    The connection to the server has failed. Account: 'HotHot', server: 'smtp.live.com', Protocol: SMTP, Port: 25, secure (SSL): Yes, Socket error: 10060, error number: 0x800CCC0E

    Any help gratefully received. David

    Ok thank you. I received three messages from you, two of the demon and the other Hotmail.

    Hotmail has helpfully includes the originating IP address, so I was able to check further. There is no WHOIS data for it (a bad sign to start), but it is not in the CBL. Read this page to see why it is listed and take the appropriate action. Once you are convinced that your computer - and another using the same network - are clean, you can use the link at the bottom of the CBL page to remove from the list the IP address.

    I still don't know where FCMA comes into it, and diagnostic tests in the NDR is incorrect. It is not the content of the message that is at fault, but I suspect that the block list.

    Good luck!

  • I want to save my outlook.pst file but get the following error message:-impossible to copy outlook: the process cannot access the file because another process has locked a portion of the file.

    I want to save my outlook.pst file but get the following error message:-impossible to copy outlook: the process cannot access the file because another process has locked a portion of the file. How can I unlock it please?

    You have Outlook open when you save? You need to close.

    Hope this helps

    Post back if necessary

    ___________________________________________________________

    If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • When sending e-mail message stuck in the Outbox. After a few moments, I get the following error message:

    When sending email-message stuck in the Outbox.  After a few moments, I get the following error message: your server has unexpectedly terminated connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Account: ' * address email is removed from the privacy *', server: 'outgoing.yahoo.verizon.net', Protocol: SMTP, Port: 25, secure (SSL): no, error number: 0x800CCC0F

    Ideas for a solution?

    Thank you.

    This just started today? There are a number of people with Yahoo/Verizon today information system.

    http://forums.Verizon.com/T5/Verizon-net-email/outgoing-mail-not-working-in-Outlook-Express-again/m-p/303901

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/i-cannot-send-emails-thru-Outlook-Express-6-the/9a518480-b86b-E011-8dfc-68b599b31bf5

  • I get the following errors 2 media loading 1) error: file could not be played & 2) html5: badly encoded video. What should I do to fix this?

    For example, I go to http://jwplayer.com and when I click to see the video I get the following error:
    "Error loading of media: file could not be played.

    Now for the other mistake... I go to a site where the video looks to his will start and it turns white with the error "html5: badly encoded video."

    I went to http://detectmybrowser.com and in the section check the HTML5 video webm and h264 are red (which means that I don't have these plugins that I guess)

    Then... How to fix this?

    Maybe you need this:
    Windows Media Feature Pack for Windows 7 N and Windows 7 KN:

  • 6.2.16: when you try to update Itunes, I get the following error message: "there is a problem with this package of can I install."  A program required for this install to complete could not be run.  Contact your support team / packages vendo

    6.2.16: when you try to update ITunes on my Windows laptop, I get the following error message: "there is a problem with this Windows Installer package.  A program required for this teaching to complete could not be run.  Contact your supplier of staff or the package of support ".  There is no associated error code.  I've never had a previous issue with ITunes updates.  Thank you, Debbie

    Repair Apple Software Update since the programs & features Panel configuration and then try again.

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

    TT2

  • Since the change of Tiscali to TalkTalk if I click on links in the emails read on webmail, I get the following error message and then I get disconnected from your

    Since the change of Tiscali to TalkTalk if I click on links in the emails read on webmail, I get the following error message and then I disconnected from TalkTalk webmail.

    HTTP status 404 - /cp/templates/applications/mail/html/null.jsp type status report

    message /cp/templates/applications/mail/html/null.jsp

    Description the requested resource (/ cp/templates/applications/mail/html/null.jsp) is not available. Apache Tomcat/5.5.27

    can you help
    

    Please contact the webmaster. The webmaster will then contact us if they need our help. Thank you!

  • On startup, I get the following error: spoolsv.exe - Application error

    On startup, I get the following error:
    Spoolsv.exe - Application error
    The instruction at "0 x 10002837" referenced memory at "0x00000000".  The memory could not be "written".

    Then the print subsystem stops.  Windows update service keeps control and verification.  I let go 20 hours and it is never resolved.  I can't open some applications requiring printers.  Help please.

    Bill

    Hello DragonBill,

    Thank you for visiting the website of Microsoft Windows Vista Community.

    Regarding your question, the most common cause of the error is an abundance of. SHD and. Files in the directory of spool SPL.  These files are created by the spooler to save data delayed a print job.  The. SPL file contains the drawing commands and the. SHD file contains information of working parameters the print job.

    To try to correct the application spoolsv.exe error, you must remove these files from the system.  To do this, perform the following steps on your Windows Vista computer:

    1. open the Control Panel, select Classic view, select Administrative Tools and then select Services .

    2. in the Services management console, find the Spooler service, right-click on it and select stop.

    3. then open the folder C:\Windows\System32\Spool\Printers .  (Here, we assume that your Windows is installed in the default C:\Windows folder)

    4. delete all the . SHD and SPL files in this folder.

    5. then open the TMP folder and delete all the old, unused files in this folder.

    6. Finally, restart the spooler from the Services management console service.

    Important note: If you are unable to delete the files in Normal Mode, then you may have to restart your computer in Mode safe to delete files.  To start your PC in safe mode, press F8 when the system restarts, and then select the Mode option safe mode from the Windows Advanced Options Menu.

    If deleting the files do not straighten out the problem, you must perform a system restore and restore your system to the times before when the error started appearing on your computer.  A.m. run the restoration of the system, open Start, all programs, Accessories, System Tools , and then select the System restore option.  On the Welcome to system restore screen, select the restore my computer to a time option earlier and select Next.  In the Select Restore Point screen, select the date that represents the restore point to which you want to restore your computer back, and then select Next.  Finally, check and then click Next again to confirm your restore point and restore of the system.  Restart your computer when you are prompted, and then press OK to close the end of System Restore screen.

    It is important that you know that application errors can also occur because of virus or spyware infections.  In fact, the Spoolsv.exe process is also a known backdoor vulnerability which can be planted on your computer for malicious purposes by an attacker.  Therefore, if you see an unknown process running on your system, you must take appropriate measures to remove them.

    Let us know if these steps solve your problem.  I hope the information is useful.

    Kind regards

    Anthony
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • trying to browse some of the sites locally that we get the following error: HTTP error 500.19 - Internal Server Error

    HTTP 500.19 - internal error in the server error

    Hello

    We have Windows 2008 R2 Server, 64-Bit

    IIS version: 7.5.7600.16385

    We had several Web sites for our clients on this IIS server.

    While some of the hosted site work properly, but when you try to browse some of the sites locally, we get the following error:

    HTTP 500.19 error - internal error the requested page server is inaccessible because the configuration data of the page are not valid.

    Hello SGTPrasad

    You can find the Server forums on TechNet support, please create a new post at the following link:

    http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

  • I get the following error code 80070bc9 when you try to do window upsdates

    I get the following error code 80070BC9 when you try to do a Windows Update. All of my updates have failed in the last three months and most have failed in the last six months. I found this problem when you try to install Itunes and received the error HRESLUT:0x8007054F. After researching this error, I was sharp may receive updates. Help, please.

    Hello Kristen,

    Follow the steps mentioned below:

    Step 1:

    Temporarily disable or uninstall the security software

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Step 2:

    Reset components Windows Update the link below:

    How to reset the Windows Update components
    http://support.Microsoft.com/kb/971058

    Note: Click on run in the file download dialog box and follow the steps described in the fix it Wizard.

    Hope this helps

  • I get the following error message when you try to install Windows Live Essentials for Windows 7-64-bit: __One installation files seems to be corrupted. HR:0 x 80070003

    I get the following error message when you try to install Windows Live Essentials for Windows 7 64-bit:
    One of the installation files seems to be corrupted. HR:0 x 80070003

    Hello Amawob,

    Thank you for using the Microsoft answers Forums.

    Solution:

    Follow the steps in the web link below.

    You cannot install some programs or updates.

    http://support.Microsoft.com/kb/822798

    Reset the Windows Update components.

    http://support.Microsoft.com/kb/971058

    That should solve the problem for you.

    Thank you.

    UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

  • While trying to upgrade to remote desktop I get the following error message: Setup cannot update your Windows XP files because the language installed on your system is different from the update language.

    KB952155 Setup Error.

    While trying to upgrade to remote desktop I get the following error message: Setup cannot update your Windows XP files because the language installed on your system is different from the update language. Now, that - what it means and how can I fix it? I have installed SP3

    Eivind Aakhus Hello,

    If you have the latest version of Office installed on your computer remotely, then you need to enable the Active X control.

    Follow these steps to activate the ActiveX module.

    a. open Internet Explorer by clicking the Start button, and then click Internet Explorer.

    b. click Tools, point to manage add-ons and then click Enable or disable add-ons.

    c. in the list view, click to view all ActiveX, ActiveX controls downloaded controls.

    d. choose the one you want to activate, and then select Enable.

  • I get the following error when I am trying to connect to a network by using different credentials. 1219 system error has occurred.

    Multiple connections to a server or resource shared by the same user

    I get the following error when I am trying to connect to a network by using different credentials.

    1219 system error has occurred.

    Multiple connections to a server or a shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again...

    I don't want to use the IP address. and I don't want to delete all connections using the net use * / delete command.

    Kindly give me the solution as I am now frustrated with this issue.

    Kind regards

    Sajid

    Hello

    ·         Have you tried to access the files that were on Skydrive?

    ·         Did someone else uses your computer?

    From now on, I suggest you try the steps mentioned in the article below.

    Error message when you use user credentials to connect to a network from a Windows computer: "the specified network folder is currently mapped using a different username and password.

    http://support.Microsoft.com/kb/938120

    You can also ask your question in the forum of the Tech Net Windows Server using best.

    http://social.technet.Microsoft.com/forums/en/category/WindowsServer

    Hope this information is helpful and let me know if you need additional assistance.

  • I get the following error: error \mset16g.dll specified module could not be found. I am running XP on top of vmware fusion

    original tittle:msetg.161

    I get the following error: error \mset16g.dll specified module could not be found.  I am running XP on top of vmware fusion

    Hello Salim'sMailbox,.

    ·         When exactly do you receive the error message?

    ·         Did you do changes on the computer before the show?

    Follow these methods.

    Method 1: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click on restart to restart the computer.

    Method 2: Performs a search using the Microsoft safety scanner.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Response with more information to help you further.

  • When I try to play a DVD I get the following error: C00D1163 indicating a digital license incompatibility. How can I fix it?

    When I try to play a DVD I get the following error: C00D1163 indicating a digital license incompatibility.  How can I fix it?

    Hi ratdogmw,

    1. what kind of file contains the DVD?

    2. If it works well before? If so, then remember to make changes to the computer, after which the issue started?

    I suggest you to take a look at the following article link and check if it helps:

    Windows Media Player Error Message help

    I hope this helps.

Maybe you are looking for

  • How do I see all the 'title' of a (now truncated) page?

    I see that Firefox is now truncating the 'title' of web pages. I see no good reason for this because there is empty space to the right of the title. I think that it did in the Department 'anything to make changes to Firefox', but in this case, it is

  • extensions are disabled in firefox's private browsing?

    I recently spent Firefox to chrome, because it gives the unique password manager. But unlike chrome or ie9, it gives no information on extensions,While inprivate browsing. before I use it as my main browser, I want to assure you, that extensions are

  • Disk utility is suddenly really, really ugly and unusable (design problem)?

    If you open disk utility, you will see that someone (probably an insider posing as an Apple employee) has replaced the entire program with their first year of college programming project, which they have done before, they heard on the guidelines or u

  • How to run the external monitor and Portege S100 together

    I am trying to add a second monitor to my S100. But I can't get the second monitor screen and laptop to work at the same time. (Display settings never 'sees' a single monitor.) Other forums on this site suggests that it is something to do with the fa

  • 2013 automatically compile in 64-bit exe?

    I will soon put in place an exe from 2013 on a variable network shared server will be fed a PC lab.  Before you start this way I want to be shure when I compile the vi (which will be on the server), it will be 64-bit.  Having trouble finding the exac