I get the following error when I am trying to connect to a network by using different credentials. 1219 system error has occurred.
Multiple connections to a server or resource shared by the same user
I get the following error when I am trying to connect to a network by using different credentials.
1219 system error has occurred.
Multiple connections to a server or a shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again...
I don't want to use the IP address. and I don't want to delete all connections using the net use * / delete command.
Kindly give me the solution as I am now frustrated with this issue.
Kind regards
Sajid
Hello
· Have you tried to access the files that were on Skydrive?
· Did someone else uses your computer?
From now on, I suggest you try the steps mentioned in the article below.
Error message when you use user credentials to connect to a network from a Windows computer: "the specified network folder is currently mapped using a different username and password.
http://support.Microsoft.com/kb/938120
You can also ask your question in the forum of the Tech Net Windows Server using best.
http://social.technet.Microsoft.com/forums/en/category/WindowsServer
Hope this information is helpful and let me know if you need additional assistance.
Tags: Windows
Similar Questions
-
6.2.16: when you try to update ITunes on my Windows laptop, I get the following error message: "there is a problem with this Windows Installer package. A program required for this teaching to complete could not be run. Contact your supplier of staff or the package of support ". There is no associated error code. I've never had a previous issue with ITunes updates. Thank you, Debbie
Repair Apple Software Update since the programs & features Panel configuration and then try again.
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.
Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.
The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.
Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.
TT2
-
I get the following error code 80070bc9 when you try to do window upsdates
I get the following error code 80070BC9 when you try to do a Windows Update. All of my updates have failed in the last three months and most have failed in the last six months. I found this problem when you try to install Itunes and received the error HRESLUT:0x8007054F. After researching this error, I was sharp may receive updates. Help, please.
Hello Kristen,
Follow the steps mentioned below:
Step 1:
Temporarily disable or uninstall the security software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Step 2:
Reset components Windows Update the link below:
How to reset the Windows Update components
http://support.Microsoft.com/kb/971058Note: Click on run in the file download dialog box and follow the steps described in the fix it Wizard.
Hope this helps
-
I get the following error message when you try to install Windows Live Essentials for Windows 7 64-bit:
One of the installation files seems to be corrupted. HR:0 x 80070003Hello Amawob,
Thank you for using the Microsoft answers Forums.
Solution:
You cannot install some programs or updates.
http://support.Microsoft.com/kb/822798
Reset the Windows Update components.
http://support.Microsoft.com/kb/971058
That should solve the problem for you.
Thank you.
UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO
-
When I try to send emails via outlook express, I get the following error message:
When I try to send and email using Outlook Express, I get the following error message:
The connection to the server has failed. Account: 'HotHot', server: 'smtp.live.com', Protocol: SMTP, Port: 25, secure (SSL): Yes, Socket error: 10060, error number: 0x800CCC0E
Any help gratefully received. David
Ok thank you. I received three messages from you, two of the demon and the other Hotmail.
Hotmail has helpfully includes the originating IP address, so I was able to check further. There is no WHOIS data for it (a bad sign to start), but it is not in the CBL. Read this page to see why it is listed and take the appropriate action. Once you are convinced that your computer - and another using the same network - are clean, you can use the link at the bottom of the CBL page to remove from the list the IP address.
I still don't know where FCMA comes into it, and diagnostic tests in the NDR is incorrect. It is not the content of the message that is at fault, but I suspect that the block list.
Good luck!
-
When I try to play a DVD I get the following error: C00D1163 indicating a digital license incompatibility. How can I fix it?
Hi ratdogmw,
1. what kind of file contains the DVD?
2. If it works well before? If so, then remember to make changes to the computer, after which the issue started?
I suggest you to take a look at the following article link and check if it helps:
Windows Media Player Error Message help
I hope this helps.
-
When sending email-message stuck in the Outbox. After a few moments, I get the following error message: your server has unexpectedly terminated connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Account: ' * address email is removed from the privacy *', server: 'outgoing.yahoo.verizon.net', Protocol: SMTP, Port: 25, secure (SSL): no, error number: 0x800CCC0F
Ideas for a solution?
Thank you.
This just started today? There are a number of people with Yahoo/Verizon today information system.
-
original title: could not copy files
When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy. The directory or file cannot be created. "I understand that I may have the physical limit of USB keys for the root directory. How can I fix it?
Hi GloriaZF,
What is the size of your external hard drive and what is the available free space? Open my computer-> right click on the external hard drive-> properties. You will not be able to copy more data if the disk is full, or who have less space compared to the size of the file you are trying to copy.
You need to remove the order data to make the space more. Deleted data from the device USB will be permanently deleted and will not be stored in your Inbox, so take care while eliminating unnecessary data.
I hope this helps.
-
Problem Windows install
When you try to download iTunes I get the following error ' there is a problem with this windows package install a program required for this install complete could not be run.
I looked at several forums and tried cleaning patches, etc they suggest. I also tried to download Windows Installer 4.5 but keep says "the update does not apply to my system" (I tried all.)
I am running Windows Vista and have downloaded the service pack 2 (one remedy suggestions!) Someone out there has a solution?
Hello, Atwitsend...,
Try to repair.
Go into Add Remove Programs, then select Apple Software Update > change > repair.If this does not work, try to uninstall. .
Remove and reinstall ITunes, Quicktime, and other software components
http://support.Apple.com/kb/HT1923Download the iTunes Installer and save it on your desktop.
http://www.Apple.com/iTunes/download/
Try to install iTunes using the installer that you saved.
-
Original title: rundll error
I get the following error when I turn on my computer. I am running VISTA with service pack 2.
C:\Program data\f10a0075-c31f-4c3d - 9 c 66 - 6aa39dd52db1.datThanks for the help.Hello
To remove the error message if still there after the controls above to malware.
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlAutoruns - free - see what programs are configured so that it starts automatically when
your system boots and you connect. Autoruns also shows you the complete list of the registry
and where applications can configure Auto-start for the files settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
When I click on my user profile, I get the following error messages: the user profile service service failed to connect. User profile cannot be loaded.
Isn't that one profile, the administrator and another account are ok
· Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~If the above does not work:
See if the information in the above tutorial will help you.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/kb/947215#letmefixit
Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx
Difficulty of a corrupted user profile
After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/kb/947242
A temporary profile is loaded after you connect to a Windows Vista-based system
See you soon.
Mick Murphy - Microsoft partner
-
Hello
Every time I close my laptop and he goes to sleep, when I reopen it the lid it restarts and I get the following error. Can you please help? Thank you!!!
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7601.2.1.0.768.3
Locale ID: 1033More information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8004AC8A10
BCP3: FFFFF80004053518
BCP4: FFFFFA8009274DC0
OS version: 6_1_7601
Service Pack: 1_0
Product: 768_1Files helping to describe the problem:
C:\WINDOWS\Minidump\092812-30045-01.dmp
C:\Users\Kevins\AppData\Local\Temp\WER-78078-0.SysData.XMLThe minidump files showed a DRIVER_POWER_STATE_FAILURE (9f) persistent stop error that seems to be caused by the Netwsw00.sys:
BUCKET_ID: X64_0x9F_3_Netwsw00_IMAGE_pci.sys
The Netwsw00.sys, which is dated March 12, 2012 is a driver for Intel wireless network adapter.
Even if it's a fairly recent version of the driver I would suggest trying the following update utility from Intel and of whether there is a newer version available and, if so, install the:
-
When I try to install MediaMonkey, I get the following error code: 0 x 80080206
When I try to install MediaMonkey, I get the following error code: 0 x 80080206
Original title: error code 0 x 80080206
Hi Thomas,
I suggest you try the procedure described in the article and see if it helps.
Why can't find or install the application on the Windows Store?
http://Windows.Microsoft.com/en-in/Windows-8/why-find-install-app-Windows-store
Hope this information helps. Answer the post with an up-to-date issue report to help you further.
-
I recently had to create a new disk and install the full version of Windows 10. I can get all my apps Cloud creative install, but first Pro Crash when I try to run it. I get the following error "the application could not start correctly (0xc0000142). Click OK to close the application. I reinstalled, reformatted the drive one reinstalled Windows 10 from scratch and I still get this error. Has anyone seen this one? My setup is below:
Hi PK Gary,.
I recently had to create a new disk and install the full version of Windows 10. I can get all my apps Cloud creative install, but first Pro Crash when I try to run it. I get the following error "the application could not start correctly (0xc0000142).
Update for Premiere Pro CC 2015 (9.2) for a fix.
Thank you
Kevin -
Greetings
I run Photoshop CS6 on my windows 7 Ultimate (MacPro 2008 via Bootcamp). 12 GB of ram, 512 on the video card. A lot of disk space. None of the questions of knowledge, viruses, malware, etc.
I have stupidly? the Applications Adobe Manager to update all my Adobe apps. Since that time I now get the following error message when you try to create the Contact Sheet II in any of my SP6 or PS5.5 64-bit or 32-bit versions. «Cold is not complete the plug of command because Photoshop was unable to locate the plugin JavaScript» Re, I installed the latest update, but no change. My installation is built on CS4 extended, then with a version Standard 5, 5.5 and 6 facilities upgrade.
The Contact Sheet function was working well, until I ran the updates.
I'm in a bad place, as I am in the middle of multiple projects, everything I need to create Contacts for. I thank any help or give advice on how to fix this...
Help, please!
Try to run Photoshop with the SHIFT key is pressed and skip loading part tird plug-in and try to use the Board contact II. A version of plug-ins from third parties have been known to break Photoshop Scrippting.
Maybe you are looking for
-
Spell checker does not seem to function?
Although there is a tick of spell checking as you write (under options) it does not work. Also, when I click the spelling icon in the toolbar opens a menu but also, it performs all the functions.
-
My devices connect to the Extender but do not connect to the internet any ideas what to do?
-
Creation of LV8.5 application EXE, Error 1502
Hello I am building an application .exe of my code of LabView8.5. This is my first time doing so. My VI program works very well and has no errors. However, when I try to compile the application, I get the error Error 1502 to the node invoke in AB_Sou
-
I've had this problem for quite a while now, and I recently tried some suggestions from this forum to try to fix it. First I tried to copy some commands to the Notepad, saved and click with the right button on the shortcut and clicked on run as admin
-
my monitor is 19 in. and my image is smaller than my screen. How can I fix it?
He always good the front screen, but my grandson played it yesterday and it has messed up... thx