I get the message "No. Boot Device Detected" in Vista

Similar Questions

• White screen then the message ' selected boot device has failed.

  After a normal shutdown last night, that my cell phone went straight to a white screen on back when I turned on.

  I tried to plug and unplug, take out the battery and connecting it to a TV with a HDMI which did not pick up anything.

  After turning off the power on and off several times, there is now a white dash in the upper left.

  I let him down for about 20 minutes before a message saying "the selected boot device is a, press ENTER to continue" that turns off the computer.

  I had the computer 4 days if shouldn't them be anything malfunction already.

  Any help would be appreciated!

  GabbyBlag

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on startup problems and wanted to help.

  You should not have problems with a PC this new.
  
  My suggestion is that you contact the HP customer support to see about maintenance and options at your disposal under warranty replacement.  If HP is unable to repair it, then you should be able to insist on a replacement - no charge!
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• During the installation of Adobe Acrobat 8 on Windows 7 Professional, why do I get the message "Adobe pdf.dll on windows Vista CD-ROM is needed.

  When you install Adobe Acrobat 8 on Windows 7 Professional, why do the consignment "Adobe pdf.dll on Windows Vista CD-ROM is needed"?

  Because your software is too old for Windows 7.

• My computer froze and when my grandson reinstalled Windows XP, all right, except that I have no sound. I get the message 'no audio device '. Can you help me to reinstall sound?

  I can't afford to pay for a solution, so I need a free site that I am disabled and do not have a lot of money.  Help, please!

  Chances are you neglected grandson install your audio drivers. Take a look in (under start-> Control Panel-> system-> hardware) Device Manager and are here all devices listed there with a yellow or red brand? Do you know what is the brand and model of your computer?

• Windows Vista startup in the Boot Manager Windows Im getting the message of File:\windows\system32\winload.exe and this isn't the start of the DVD

  Original title: Windows Vista upgrade to Windows boot disk boot manager is located in the computer but will not start up installation disc

  Im getting the message of File:\windows\system32\winload.exe

  Hi WillieGuyton,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what is the complete error message you receive?

  (4) what is the number of brand and model of your computer?

  Method 1:

  Step 1: disconnect any external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the link below to access pre - install the system recovery tools.

  How to access the System Recovery Options menu?

  Run the tool to restart system as shown in the link below
  How to use Startup Repair?

  
  Method 2:

  Step 1:

  Set the first boot device in the DVD in BIOS to boot from the Windows Installation DVD. To do this, see the documentation that came with the computer.

  Important: Change BIOS (Basic input output system) /semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Step 2: Follow the steps mentioned in the article below for the restoration of the Boot Configuration database (BCD) store

  Windows no longer starts after you install an earlier version of the Windows operating system in a dual-boot configuration

  http://support.Microsoft.com/kb/919529

• I can't reach some websites with any browser. I get the message ERR_CONNECTION_REFUSED. If I boot in safe mode I don't have the issue. I tried the reset and repair of everything. Help, please

  I can't reach some websites with any browser. I get the message ERR_CONNECTION_REFUSED. If I boot in safe mode I don't have the issue. I tried the reset and repair of everything. Help, please

  Try to run this program in your usual account, then copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• Why do I get the message that I am running out of storage on my device when my storage icloud is practically empty?

  Why do I get the message that I am running out of storage on my device when my storage icloud is practically empty?

  It could be that your backup may be the cause.

  See if that helps - manage your iCloud - Apple Support storage space

• Pavilion g6: I get the message "PCI device has not a driver" I don't know what to do.

  EHEN I run the trouble Shooter, I get the message "PCI device has not a driver" I don't know what to do. Can I get a link to load down even. This problem has prompted after a system restore.

  Hello

  Most as it is the PCIe card reader drivers. Please try:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_133237_1 & swEnvOid = 4158

  Otherwise after return what its hardware id.

  Kind regards.

• I keep getting the message "there are no lightscribe devices in this system.

  I keep getting the message "there are no lightscribe devices in this system.

  I tried to open the recommended site for updates, but I get an error messasage.  Can you help me?

  Follow article

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&ObjectID=c01900020&JumpID=reg_R1002_USEN

• I get the message 'the' device name' cannot be stopped because a program accesses still it."when using safely remove hardware program.

  Trying to read an external drive "Xcraft", by chance the power supply cable was disconnected. I ' v ereconnected the cable and try to remove the device using the ' renove safely» The unit is not stopped after selection and | I get the message 'the' device name' cannot be stopped because a program is accessed again. ' Y at - it patches or wrap-around work. Just, I can't access the drive. Appreciate any help.

  Try this and see if you can get it to unlock. If it does not just try to restart your computer without USB drive.

  The download is from Microsoft so it's safe!

  Good luck!  Please rate me upward if you find my post helpful. Thank you!

• How can I get my computer my external USB drive (portfolio) after that I repeatedly get the message that the device "can not be removed?

  Original title: I need a market to resolve the problem remove the instrument.

  How can I get my computer my external USB drive (portfolio) after that I repeatedly get the message that the device "can not be removed? I have closed all other programs and waited for varying amounts of time, and tried all of the fixes that have been proposed on this site. Nothing works. I don't want to turn off the computer whenever I have to remove the device.

  I can't know what "all patches" you've tried, but:

  Make sure that the system restore does not monitor the external drive.  SR does need to control the system drive and to the system drive, SR has only about 1 GB of space max.  Make a right click my computer and select properties then the System Restore tab to configure SR.

  Make sure that the Indexing Service is turned off (at least for the external drive).  To disable disk indexing completely, which will also speed up your computer a bit, see http://lifehacker.com/031440/turn-off-indexing-and-speed-up-windows-xp.  For the external drive, right-click on the drive icon in my computer, select properties and uncheck the indexing disc

  There are different workarounds short to shut down the computer, but you might want to try this third-party app first:
  http://safelyremove.com/index.html  Among other features:

  The device cannot be stopped now. Why? Never encountered the situation when Windows does not allow you to remove a device? Unlike Windows, USB remove will show you programs which prevent the device to be stopped and let you close these programs or just files that they opened on the device.

• Not the 'Volume Control', I get the message "there are no available active mixer device." ____

  I went through the troubleshooting help utility and when I opened 'Volume Control' I get the message "there no activemixerdevices available". I tried different things, but still no sound can u tell me how to recover the volume control because when I click on it says "there no activemixerdevices available". and when I go to control panel, sounds and audio devices it says no device and grayed out. Please HELP NEED HELP URGENT

  Update:

  I mixer by updating the driver but when I go to the sound and the device it says "No. Audio Device" in the volume tab my speakers work perfectly with my mp3

  If not, do that, if the above does not work:

  Insert your XP CD in your drive. Do not start. Then:

  Start > run > type in msconfig > OK or Enter > click on extract files > then file to extract = sndvol32.exe > then tap your CD-ROM drive as the source > extract to c:\windows\system32 > can Extraxt > crush is required > if it does not re-post.

  See you soon,.

  Jerry

• You try to run startup repair but get the message that it could not detect a problem.

  Original title: start repair.

  I tried to use my installation cd to repair the startup.  Then, I get the message "could not Startup Repair detect a problem.  If you have recently established a legacy to this computer, such as a camera or portable music player, remove it and restart your computer. "But nothing is fixed.
  I use a Toshiba laptop with Vista.

  Hello cats0527,

  From what I could gather, it is not a specific forum for Microsoft Office Accounting 2008.  That being said, you try to open a new thread in the following forum:

  http://answers.Microsoft.com/en-us/Office/Forum/Office_2007-office_other?tab=all

  At the very least, they should be able to point you in the right direction.

  Best regards

  Matthew_Ha

• During a call to ActionVoip, getting the message "End call (call failed due to sound device on this computer problems)"

  Original title: I use Windows 7 Edition home premium.  When I am dialing from ActionVoip I get the message ' call ends (the call failed due to problems of audio device on this computer. "pls help...

  I use Windows 7 Edition home premium.  When I am dialing from ActionVoip I get the message ' call ends (the call failed due to problems of audio device on this computer. "pls help...

  Hello
   
  1. do you get errors related to other audio devices on the computer?
  2. what type of audio device you use? (You use a headset? If so, who is the manufacturer and what is the model?)
  3. in Device Manager, is the sound, video and game controllers show any exclamation point?
  4. have you made any software or changes to the material on the computer before this problem?

  Open the Device Manager

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager
   
  To work on the issue, refer to these methods.
   
  Method 1:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
   
  Method 2:
   
  Reinstall the program in compatibility mode.
   
  Check out these links.
   
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
   
  Install a program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program
   
  Make older programs run in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Hope the information is useful.

• When I launch the new photo or the new HDR feature fusion device, they start for about 10 seconds, but then I get the message error "an unknown error has occurred."  What should I do?

  When I launch the new photo or the new HDR feature fusion device, they start for about 10 seconds, but then I get the message error "an unknown error has occurred."  What should I do?

  There is a problem with these models of Leica cameras providing accurate information in the EXIF data F stop. Photomerge for HDR and Panorama will use this information to "mix" the image files. A solution has been found using an EXIF here Editor:

  Re: LR/ACR Pano merger combining Glitch

  This may or may not be the source of your problem, but worth investigating. Try to use any other device non-Leica and do a quick test Panorama or HDR and see if you get the same message.