I get the message "process host windows (Rundll32) has stopped working" & "Windows Explorer has stopped working".

Similar Questions

• When I try to connect to the net on my laptop LG I often get the message saying that windows could not connect.

  Windows does not remember the setting.

  When I try to connect to the net on my laptop LG I often get the message saying that windows could not connect and I have to go into the advanced settings and check the box that says allow windows to configure the network. My problem is that windows doesn't remember this setting and that I need to check the box almost everytime I try to connect. He made it with my desktop so I was wondering if anyone has a solution for this.

  Using a wireless router? What is the brand and model of your router? I don't think it's a matter of windows.

  Troubleshooting in windows wireless network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  Hope this helpful. Post back if your problem is not resolved in the link above.

• Download Itunes on my laptop just before, it starts to install, I get a message saying that windows Explorer stops because the prevention of execution of data has stopped installation

  original title: Itunes and DEP

  While downloading Itunes on my laptop right before you start to install, I get a message saying that windows Explorer stops because the prevention of execution of data has stopped installation.  Is there any solution for this?  I'd like to install itunes on my laptop.

  Hi Steve681229,

  Thank you for using the Microsoft Answers forum.  Here's what worked for someone else.  Thanks Kevin

  Hi thrivenformore,

  Please use the forum for Support of Vista,

  You could try to add iTunes to the DEP exception list.  However, this behavior is not normal.  Go to the support forum of Apple for iTunes for Windows, search on DEP.  There should be a thread "How can I turn off DEP for iTunes?" or it Prevet planting iTunes? "which provide troubleshooting steps you might want to try before adding it to the list of exceptions."

  How to add the program to the DEP exception list:

  1. Press Start, right click on computer and select Properties.
  2. in the window that appears, click Advanced (on the left panel) system settings.
  3. in the first box that says Performance, click on the settings button.
  4. in the window that opens, click the Data Execution Prevention tab at the top.
  5. There should be a box of exceptions in the middle of this window. Click the Add button and navigate to the C: drive, then Program Files, then the iTunes folder, and then choose the iTunes exe.
  6. Add the exception, and then click OK in the window of the DEP.

  Hope this helps, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista startup in the Boot Manager Windows Im getting the message of File:\windows\system32\winload.exe and this isn't the start of the DVD

  Original title: Windows Vista upgrade to Windows boot disk boot manager is located in the computer but will not start up installation disc

  Im getting the message of File:\windows\system32\winload.exe

  Hi WillieGuyton,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what is the complete error message you receive?

  (4) what is the number of brand and model of your computer?

  Method 1:

  Step 1: disconnect any external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the link below to access pre - install the system recovery tools.

  How to access the System Recovery Options menu?

  Run the tool to restart system as shown in the link below
  How to use Startup Repair?

  
  Method 2:

  Step 1:

  Set the first boot device in the DVD in BIOS to boot from the Windows Installation DVD. To do this, see the documentation that came with the computer.

  Important: Change BIOS (Basic input output system) /semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Step 2: Follow the steps mentioned in the article below for the restoration of the Boot Configuration database (BCD) store

  Windows no longer starts after you install an earlier version of the Windows operating system in a dual-boot configuration

  http://support.Microsoft.com/kb/919529

• I can't delete my emails, get the message that an unknown error has occurred how fix this so I can delete my emails again?

  Original title: direct email from Microsoft

  I can't delete my emails, get the message that an unknown error has occurred how fix this so I can delete my emails again?

  To help you effectively, we need to know exactly which e-mail system you use.  You can see the differences here

• When I launch the new photo or the new HDR feature fusion device, they start for about 10 seconds, but then I get the message error "an unknown error has occurred."  What should I do?

  When I launch the new photo or the new HDR feature fusion device, they start for about 10 seconds, but then I get the message error "an unknown error has occurred."  What should I do?

  There is a problem with these models of Leica cameras providing accurate information in the EXIF data F stop. Photomerge for HDR and Panorama will use this information to "mix" the image files. A solution has been found using an EXIF here Editor:

  Re: LR/ACR Pano merger combining Glitch

  This may or may not be the source of your problem, but worth investigating. Try to use any other device non-Leica and do a quick test Panorama or HDR and see if you get the same message.

• I get a message saying that Windows Explorer has stopped working and when I restart it pop again.

  Hi I have windows vista basic and it worked very well until yestaday and I got a message saying windows Explorer has stopped working and when I click on restart 3 seconds later, he appears once again?

  original title: Windows Vista Basic worked fine until yesterday and now I get messages saying that Windows Explorer has stopped working.
  Hello

  Use the startup clean and other methods to try to determine the cause of and eliminate
  the questions.

  ---------------------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I bought Illustrator on my iMac and downloaded and then I get the message that my trial version has expired and I have to buy Illustrator! But I just bought! So I deleted all the files Adobe from my computer and tried to download

  (1) I've deleted all my my IMAC Adobe trial versions

  (2) I bought HAVE

  (3) I downloaded, but I get the message that my AI trial version has expired and that I should buy I

  (4) but I already bought and paid for the one application I

  (5) what should I do now?

  Sorry, I just found that I needed only to open a session with the correct Adobe account. Problem solved.

• Replacing hard drive, made restoration of the factory, get the message error "installing windows could not configure windows to run on a hardware on this computer."

  OS = Windows 7

  Computer = Gateway FX6840
  Media = gateway recovery media
  Hard drive is set to AHCI in BIOS

  I started meeting with S.M.A.R.T. errors.

  I backed up my data.

  I replaced 1 TB Seagate original with a new 2 hard drive to Seagate Barracuda SATA STBD2000101. Computer is equipped also is from the factory... no additional or modified facilities.

  I tried to restore Windows 7 from the rescue of the disks created with the "Gateway Recovery Management"

  Windows copying files over, the machine restarts, it installs the devices, then it stops at the "installation program starts services" and a window opens with the message "windows Setup could not configure windows to run on a hardware on this computer.

  I can't apply the Article ID: 2466753 because the process of restoration of the plant seems not provide an option to load a driver .

  Any help would be appreciated... Gateway is only interested to collect money.  They have no interest in serving the poor suckers who buy their products (computer is 2 years old so it is out of warranty).

  Thanks for the reply.

  Fortunately, I solved the problem myself (after 19 hours of stress).
  The problem is that the recent hard disk has something different that no longer ages and makes pre-service pack 1 (SP1 solves the problem) versions of Windows 7 incompatible. My set of recovery disks have been created the day I bought the computer, which had no windows updates installed at the time.

  There is an "easy solution" on the Microsoft support site: http://support.microsoft.com/kb/2466753/en-us

  Unfortunately, their method works only if you have a Windows 7 installation disc, which does most of the people who buy computers pre-built manufacturers. Essentially, the solution is to install SP1 from a disc when don't give you the possibility to load drivers during installation, an option that the gateway recovery disks.

  So I thought that, theoretically, if I use my recovery discs to get a clean install on a hard drive that works, then use windows update to get updated (or at least to get SP1), and then make a set of NEW recovery disks (using windows backup: start > all programs > maintenance > Backup and Restore), I should be able to use these discs to install the new hard disk.

  It worked.

  So for someone else who has this same problem with new hard disks, I hope that the above is easy to understand. If not, ask someone else more savvy and show them this thread. Do not forget that at the end to create new recovery disks, it will ask you if you also want to create a 'system' repair disc. DO THIS! This is the disk that you need to start from when you are ready to install.

  Also: If your new hard drive is bigger than the one that you have created the new recovery disks, the partition on your new hard drive (once everything is installed) will be the same size as the one that you have created the records on. You will need to use a kind of editor of score for re - size. I recommend Gnome Partition Editor. http://www.gparted.org

  Burn gparted Live CD and him, resize your partition, and you're done (google for more in-depth instructions).

  Thank you, theloungelizardK, for the offer on the ISO, but I don't need. :)

  Eastan - ITF

• Tried to turn off my computer and it froze. Now, the desktop does not load and I get a message saying that Windows Explorer is not responding

  Original title: virus Possible?

  I am running Windows Vista Home Premium on a Toshiba laptop. The last time I tried to stop it, it froze (got as far as the last screen showing 'close', then didn't). The next time I turned it on the desktop would not load completely (white screen, no desktop icons, accesses start bar) and if I click on the desktop I get a message saying "Windows Explorer is unresponsive. I tried to scan antivirus, but that also froze. I ran Microsoft defender several times, and it always freezes on C:\windows\system32\cmd.exe. While I can access internet Explorer, I can't click on the links that would open a new page (gel once more). Finally I can't yet do a reboot or a full stop. If it's a virus, how can I solve the problem when no anti-virus software is running?

  Any help would be greatly appreciated! I just moved across the world and have little knowledge of computers (but I'm much less following the instructions!). The last thing I need is for my laptop to be drunk so I can't communicate with the House...

  Hello

  Since you have had that protection antivirus in the next message will be methods to
  carefully check for malware.

  TrendMicro must be uninstalled and replaced<- this="" is="" a="" must="" do!="" if="" you="" have="">
  problems to check with TrendMicro.

  Instructions/TrendMicro removal tool
  http://eSupport.trendmicro.com/1/How-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspx

  How can I uninstall my Trend Micro program removal tools fail?
  http://eSupport.trendmicro.com/pages/how-do-I-uninstall-my-trend-micro-home-and-Home-Office-program-if-the.aspx

  List of tools to clean/uninstall anti-malware programs
  http://answers.Microsoft.com/en-us/protect/Forum/protect_start/list-of-anti-malware-program-cleanupuninstall/407bf6da-C05D-4546-8788-0aa4c25a1f91

  Uninstallers (removal tools) for common antivirus software
  http://KB.eset.com/esetkb/index?page=content&ID=SOLN146

  ------------------------

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leave the file system, Web,.
  Operational network (Script and behavior are also recommended in Ver 6 +).

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Avast - home - free - 7.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y<-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.
  http://www.Malwarebytes.org/products/malwarebytes_free

  =======================================

  Do not type the sfcdetails command, copy and paste.

  Many files that SFC cannot resolve are not important.

  Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN

  put the command from below (copy and paste) in this box and her and then press ENTER.

  findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt

  who creates the sfcdetails.txt file in the folder that you are in when you run it.

  So if you're in C:\Windows\System32 > then you will need to look in that folder for the file.

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  in Windows Vista
  http://support.Microsoft.com/kb/928228

  This creates sfcdetails.txt in C:\Windows\System32 find and you can post the errors in a message
  here. NOTE: there are probably duplicates so please only post once each section error.

  You can read the newspaper/txt files easier if you right click on Notepad or Wordpad then RUN AS ADMIN - then
  You can navigate to sfcdetails.txt (in C:\Windows\System32) or cbs.log (in C:\Windows\Logs) as needed.
  (You may need to search sfcdetails.txt if it is not created in the default folders.)

  =================================================================

  Did you do checks memory and updated the BIOS, chipset of low level drivers and major
  embedded and separate device drivers?

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• All of a sudden get the message saying my windows 7 is not genuine?

  I bought this copy of Windows 7 Ultimate (updated version) nine on amazon. I used it to upgrade the windows 7 Home premium, which is installed with a new laptop. The laptop was purchased directly from Toshiba so I'm reasonable sure it is authentic. It was a little embarrassing turn on and had to be done by phone to Microsoft. He was well until the message no real work appeared two days ago. The diagnostic below report indicates what could be the problem? I still have the original 7 key ultimate disc and thus that domestic product premium oem version supplied with the laptop. I also found slui.exe does not, nor has the link change product key in the windows activation section. ???

  Diagnostic report (1.9.0027.0):

  -----------------------------------------

  Validation of Windows data-->

  Validation code: 0x8004FE22

  Validation caching Code online: n/a, hr = 0xc004f012

  Windows product key: *-* - RPXBQ - D8FWK-9D47V

  The Windows Product Key hash: xyrL3h5FyhOBsEhMlPptozn1Y8A =

  Windows product ID: 00426-074-5926643-85695

  Windows product ID type: 5

  Windows license type: retail

  The Windows OS version: 6.1.7601.2.00010100.1.0.001

  ID: {D5824B5A-7B3F-4AAB-B718-A5CE790A76D3} (3)

  Admin: Yes

  TestCab: 0x0

  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Product name: Windows 7 Ultimate

  Architecture: 0 x 00000009

  Build lab: 7601.win7sp1_gdr.111118 - 2330

  TTS error:

  Validation of diagnosis:

  Resolution state: n/a

  Given Vista WgaER-->

  ThreatID (s): n/a, hr = 0 x 80070002

  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  File: No.

  Version: N/a, hr = 0 x 80070002

  WgaTray.exe signed by: n/a, hr = 0 x 80070002

  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  Version: N/a, hr = 0 x 80070002

  OGAExec.exe signed by: n/a, hr = 0 x 80070002

  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->

  Office status: 109 n/a

  OGA Version: N/a, 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->

  Proxy settings: N/A

  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)

  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe

  Download signed ActiveX controls: fast

  Download unsigned ActiveX controls: disabled

  Run ActiveX controls and plug-ins: allowed

  Initialize and script ActiveX controls not marked as safe: disabled

  Allow the Internet Explorer Webbrowser control scripts: disabled

  Active scripting: allowed

  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->

  Office details: {D5824B5A-7B3F-4AAB-B718-A5CE790A76D3}1.9.0027.06.1.7601.2.00010100.1.0.001x 64*-*-*-*-9D47V00426-074-5926643-856955S-1-5-21-3935993167-2126870205-1677796191TOSHIBASatellite P770DTOSHIBA1.1020110513000000.000000 + 000FB8A3007018400FC04090409US Mountain Standard Time(GMT-07:00)03TOSCPLTOSCPL00109

  Content Spsys.log: 0 x 80070002

  License data-->

  C:\windows\system32\slmgr.vbs(22, 1) (null): library not registered.

  Windows Activation Technologies-->

  HrOffline: 0x8004FE22

  HrOnline: n/a

  Beyond: 0 x 0000000000000800

  Event timestamp: 3:16:2012 20:25

  ActiveX: Registered, Version: 7.1.7600.16395

  The admin service: recorded, Version: 7.1.7600.16395

  Output beyond bitmask:

  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM

  --> HWID data

  Current Hash HWID: MAAAAAEAAQABAAEAAAACAAAAAwABAAEAonZq2hIlugu + Pt7DYj0Qd5a1bOguEgBq

  Activation 1.0 data OEM-->

  N/A

  Activation 2.0 data OEM-->

  BIOS valid for OA 2.0: Yes

  Windows marker version: 0 x 20001

  OEMID and OEMTableID consistent: Yes

  BIOS information:

  ACPI Table name OEMID value OEMTableID value

  APIC TOSCPL TOSCPL00

  FACP TOSCPL TOSCPL00

  HPET TOSCPL TOSCPL00

  MCFG                                 A M I                     GMCH945.

  SLIC TOSCPL TOSCPL00

  SSDT AMD POWERNOW

  SSDT AMD POWERNOW

  Ignore the error message. It will be always copy and paste.

• Windows 7 Home premium install the update. When I reboot the update tries to install, but fails. I get the message "failure of windows update Setup, reverse the change.

  I tried to copy the CBS.log to a folder, then opening the files to search for an error code. I couldn't find any error code. These files are large I can remember something small.

  Try this first: -.

  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  If no joy, then

  1. open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. in the left pane, click view update history.
  3. find an update for Windows that has failed to install, and then double-click the update to view more information.
  Updates that have failed to install will display failed under status, next to the name of update.
  4. in the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.
  5. follow the links in the dialog box of Windows Update as more information or help and Support to try to resolve the problem or post back with more information on what the error code can be.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Get the message that my Windows 7 can be counterfeit

  After 5 years earlier to have Windows 7 installed on this computer, I have a message saying that it is not authentic.  Then, I get a window asking me to validate, but the "run" box could not check the origin.  I know that this is a valid software, since I got directly from Microsoft.  What should I do?

  Andre:

  Thank you for that comprehensive answer.  Unfortunately, it is too technical for me.  I made no changes to several months; This just today.  When I bought my laptop, it's VISTA and since Windows 7 has been out in a month or two, I got Windows 7 for free and it has been downloaded directly from Microsoft.  It was 5 years ago, and I had no problem until today.  When I tried to validate as requested by the system of the "run" box says that he could not verify the sender, so I stepped back.

  Any ideas? Remember, keep things simple.

  Thank you

  Carol

  Carol, I suggest following the instructions of the phone.  Just stay silent as the voice of the computer asks you questions, and finally you will be asked if you want to be transferred.  Answer at this time, with, "Yes!"  Explain your situation to the operator and he or she will give you probably a very long code to enter to get through activation.  I just did all of this with great success, but I'm still puzzled why I had to go through this in the first place

• When I turn on my computer desktop-windows vista - I get the message that Multimedia Keyboard Driver has stopped working.

  How can I fix the error message that reader Multimedia Keyboard stopped working.  My keyboard is a

  0817-gateway model # KB.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  If it works fine in safe mode, and then try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• Get the message: "your ID Windows Live ID is unchangeable right now", during a change of Windows Live ID

  Original title: change my Windows Live ID

  I want to change my Windows Live ID of ' * address email is removed from the privacy * ' to ' * address email is removed from the privacy * "but whenever I have try happens with"your Windows Live ID cannot be changed at this time. " How can I change?

  Hello

  Since you are facing problems with Windows Live ID, you can post your request in the Forum Windows Live ID for assistance.

  Windows Live ID Forums