I get the "No. Drive Detected" message when I try to use the media Sonic program in XP?

Similar Questions

• Get "communication error with kernel" message when you try to run a virus scan program

  Get "communication error with kernel" message when you try to run a virus scan program

  Hello

  What antivirus do you use?

  Follow the steps in the article mentioned below and check if this solves the problem.

  
  The error message "error communicating with kernel":
  http://KB.eset.com/esetkb/index?page=content&ID=SOLN2280

• Error message when you try to use Windows media Player: the wmploc.d11 file has a version number of 11.0.6002.18111 where 11.0.6001.708 was expected

  My windows media player all of a sudden started giving the message "the file wmploc.d11 has a version number of 11.0.6002.18111 where 11.0.6001.708 was expected.   It started just today and I used it OK so far.    He says then I would go on the site to download the correct version. I click Yes and then try to download windows media player 11 for vista, but it then tells me that this does not apply to my system.  Any help would be appreciated,

  Thanks in advance.

  My windows media player all of a sudden started giving the message "the file wmploc.d11 has a version number of 11.0.6002.18111 where 11.0.6001.708 was expected.   It started just today and I used it OK so far.    He says then I would go on the site to download the correct version. I click Yes and then try to download windows media player 11 for vista, but it then tells me that this does not apply to my system.  Any help would be appreciated,

  Thanks in advance.

  =====================================
  It might be worth a try to do a system restore
  Safe mode for one hour before the beginning of the question:

  Using Windows 7 or Vista System Restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  And/or... Maybe the article would be worth the trip.

  (961047) WMP update after you one
  wmploc.dll on version error
  wrong number
  http://support.Microsoft.com/kb/961047

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I get an error "fix computer clock" when I try to use windows media center with netflix

  I downloaded the software you need to watch your netflix on Windows Media Center. Once I'm inside the Windows Media Center, I click on Netflix, my user name and password for netflix pops up, then I think that enter to go... I get an error message that says "Please update the computer clock you and or update your timezone. '. Both are already up to date, but I get this error message.

  Check your time zone. If all goes well, then it's a question with netflix. You can contact the support of netflix.

  Alternatively, you can try to reset your information newspaper: -.

  http://www.hack7mc.com/2009/11/resetting-Netflix-login-information-in-Windows-Media-Center.html

• When I try to use Windows Media Player 11 I get the message: Windows Media Player is not properly installed on windows vista

  Original title: MediaPlayer does not open. Followd Scout121 answr. Got the message: not recognized as int/ext control.  Help!

  I followed the directions for the question of Scout121, posted by Bikesh T 20 October 2011.  When I entered the "regsvr32vbscript.dll", I got the message: is not recognized as internal or external, command an executable program or batch file.

  We have Windows Vista Home Premium 32 bit version 6.0 (Build 6002: Service Pack 2).

  I received a validation code windows, but when I try to use Windows Media Player 11 but the message: Windows Media Player is not properly installed.   When I try to install the player form Microsoft Web site, I get the message that the installation has failed.

  Please notify.  We are clueless.  Thank you.

  Hello

  What troubleshooting steps you have done until now?

  Click on the link below and run the fixit.

  Method 1: Solve the problems of Windows Media Player video and other media or library

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

   

  Method 2: Disable Windows Media Player and then turn it on to Windows features and check if the problem persists.

  Disable and enable Windows Media Player and check if it opens.

  (a) click Start and select Control Panel.

  (b) click on programs and features.

  (c) click on or turn off Windows features turn on on the left side.

  (d) develop the features of media; clear the check box Windows Media Player.

  (e) click Yes and OK to continue.

  (f) restart the computer.

  Note: If windows media player is already disabled, follow the steps mentioned below:

  After the restart, follow these steps:

  (a) click Start and select Control Panel.

  (b) click on programs and features.

  (c) click on or turn off Windows features turn on on the left side.

  (d) develop the features of media; Check the Windows Media Player.

  (e) click Yes and OK to continue.

  (f) restart the computer.

  This would be re - install windows media player 12.

  See the link: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-features-on-or-off

  Method 3: Perform scan of SFC (System File Checker) and see if the problem persists.

  http://support.Microsoft.com/kb/929833

  Let us know the status of the issue.

• Message when you try to upgrade or install a program. "A network error occurred whtile attempted to read from the file:

  Receive the following message when you try to upgrade or install a program. "A network error occurred whtile attempted to read from the file?: MSI

  * original title - cannot open files with .msi extension *.

  You try to open this leave a link online? If yes I would like to try and save the MSI on your desktop and then try to open.

• Error message when you try to use Toshiba Disc Creator

  I recently upgraded to Vista SP1 SP2 and now I get an error message when I try to use Toshiba Disc Creator 2.0.1.3. "An unexpected error has occurred. Error code 32007C-26-00000001 "it worked perfectly before.

  This is the first time that I used it since the update so I think that SP2 may be part of the problem, but I'm not sure. I could not find updates for TDC. My system is a Satellite L305-S5919 with Vista 32 bit.
  Someone has an idea of what could be the cause of this error?
  Thank you

  Have you tried to roll back the OS in time and checking the previous features once again, just to be sure, it has something to do with the installation of SP2?

  I put t know if anyone here can offer a solution but I m quite pessimistic in this topic and don t think that Toshiba provide new version.
  AFAIK Toshiba disc creator is always available with single and also downloadable image recovery application.

• I now get [error number: 0 x 80070424] when I try to use windows update.

  I now get [error number: 0 x 80070424] when I try to use windows update. Also I can not update microsoft UAA!

  Hi KirkOKC,

  Follow the steps described in this document to resolve the Windows Update error 0 x 80070424.

  Let us know if that helps.

• When you try to use windows media player, the wmploc.d11 file has a version number of 11.0.6002.18311 where to 11.0.6002.18111.

  When you try to use windows media player, the wmploc.d11 file has a version number of 11.0.6002.18311 where to 11.0.6002.18111.

  The following article is maybe worth a visit:

  (961047) WMP update after you one
  wmploc.dll on version error
  wrong number
  http://support.Microsoft.com/kb/961047

  Failure to solve the problem... and if you
  are comfortable editing the registry... it
  may be worth a try to remove the following text
  Registry keys:

  (FWIW... it's always a good idea to create a system)
  Restore point before editing the registry)

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MediaPlayer\Setup\wmp.dll
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MediaPlayer\Setup\wmploc.dll
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MediaPlayer\Setup\\wmplayer.exe

• I get this message when I try to use my laptop... The group policy service failed to connect... How can I fix this problem please? __

  the laptop had windows xp originally... I've updated to Vista.  He worked for a long time

  Hi ashenstar,

   

  Welcome to Microsoft Answers Forums.

  We would like to get more information about you to help solve your problem. You better, please answer the following questions.

  ·         When you get this error message?

  ·         When was the last time it worked?

  ·         Remember to make changes to the computer recently?

  ·         You have security software installed on the computer?

  ·         How many accounts do you have on the computer?

  This happens especially if the user profile is damaged.

  If you have all the other user accounts on the computer, try to connect to this account and check if you are facing a similar question.

  First suggest to check if you can boot to the desktop by using the procedure in safe mode.

  Steps to start in safe mode with networking

   

  1 restart your computer if it is running.

  2. tap on the F8 key after your initially on powers computer.

  3. Once you see the menu Advanced Boot Options, you can stop tapping.

  4. use the up/down arrow keys to highlight your selection.

  5. Select Mode safe mode with networking and press ENTER.

  6. you should see loading drivers and wait please.

  7. you should then be at the Welcome screen.

  8. connect to your computer using an account with administrator privileges.

  Start your computer in safe mode

  http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

  If you are able to boot to the desktop in safe mode, first create a new user account.

  Then suggest running a virus scan online on the computer, the mode safe mode with networking.

  Check the link below for the online virus scan

  http://OneCare.live.com/site/en-us/default.htm

  If you are able to connect to any other user account on the computer and cannot connect to an account, you will need to transfer the settings from the user profile of the user account corrupted to a new user account.

  How to copy data from a corrupted to a new profile in Windows XP user profile

  http://support.Microsoft.com/kb/811151

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Try the following steps only if the computer has more than one user account.

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

  http://support.Microsoft.com/kb/947215

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get a "Failed to initialize" message when I try to download the player XI

  I am running windows XP SP3, after the opening of any doc pdf as my computer would lock up. I uninstalled my current version and tried to download the latest version. No mater what I tried, I would get the same message "failed to initialize." I turned off AVG, tried to use Mozilla and IE8, uninstalled Flash Player all with the same results. What else can I try?

  You can try to use this tool to remove all traces of the previous versions of the player:

  http://labs.Adobe.com/downloads/acrobatcleaner.html

  Then download the complete drive offline Installer

  http://get.Adobe.com/reader/Enterprise/

  and run immediately after restarting your computer.

• I get an error message when I try to use the rectangle tool.

  This just started today, I use a HP laptop with windows 8, I just downloaded Photoshop in January. Whenever I use the rectangle tool I get this message: "Could not use the rectangle tool because of a program error." How can I figure out and fix the error.

  Let's try a Reset of Photoshop preferences:

  Hold down the CTRL - Shift - Alt from the cold Photoshop start.  If you get the keys to the low enough - quickly and you have to be VERY fast - it prompts you to confirm the removal of your established preferences, which will lead to them all being the default value.

• I get an "invalid pointer" error message when I try to capture video from my sony camera?

  I use a Sony DCR-TRV250, Windows XP Pro with SP3. When I try to capture video I get the error message "invalid pointer". Then after clicking OK I get, ' the unusable device at this time because there was an error when starting the device.» The video capture device window is open behind this error message.

  Everything works fine on other computers, so I think I am missing a file any.  Is there a way to update or reinstall Movie Maker?

  Hi LonJett,

  ·         Have you checked if there is any software updated the same?

  Log on to the Sony website and download the latest version of the software for the camera. Uninstall the existing software\driver and install the last downloaded software\driver and check for the issue.

• Photosmart HP 6520: HP Photosmart 6520 - error message when you try to use the apps

  I can't access is more apps on my Photosmart HP 6520.  I get the error message "error connection server - 1".

  I don't know if this problem just since I recently changed from a Windows PC on a Mac.

  I very rarely use the apps, so I don't know when it started.

  Everything else seems to work very well I would say.

  Can someone please tell me what could be the cause, or if there is something I can try to sort it out?

  I seem to be going round in circles, and I can't work on what is happening.

  Thanks for your help.

  Hey @TraceyMac,

  Welcome to the Forum from HP Support.  I hope you enjoy your experience here.

  I understand that you are unable to use the pads (Print Apps) on your HP Photosmart 6520 e-all-in-one printer.  I want to help you with this.  A recent installation of printer would not affect your performance of platelets but no loss of connection or wireless Web services could be a factor.

  Note that to access the applications and their use from the front panel of your printer requires two ingredients to be successful: 1) Wi - Fi connection and 2). the ePrint feature (webservices are enabled).

  • Touch the wireless icon () on the front panel of your printer - is the printer connected to your wireless network?  (If not, run the wireless configuration wizard, select your network name/SSID and enter your password wireless reconnect).  If you are connected, proceed as explained below.
  • Tap the icon of webservices/ePrint () on the front panel of your printer.
  • If webservices are not enabled, press OK in order to enable them and allow the automatic updates of printers.
  • This will cause your printer to print an information document describing the characters before @hpeprint.com your printer (ePrint address).  This is known as the claim code.  As another way to use printing applications available for your printer, you can sign in to http://www.hpconnected.com to program applications printing to print and review all the content that ideally will reappear on the front of your printer.
  • From there, you can click the devices tab and use the claimcode to add your printer to the site and take advantage of the available applications, it.

  If these basic steps to respond to a resolution, please, try the following:

  When users encounter this type of problem in general, I suggest from scratch with wireless printer, webservices, and apps printing configuration.  You can clear all of these parameters in a swoop by the factory default restore * your printer.

  Here's how:

  * Note that this step resets the setting up your printer wireless, address ePrint and other custom print settings. If you have created a custom address @hpeprint.com it is permanently erased. For more information about custom addresses ePrint, click here.

  • Front panel of the printer, arrow down and select Tools
  • Select restore default

  Then touch the wireless icon, run the Wireless Setup Wizard to restore your network connection, and then tap the Webservices () and reactivate your webservices.

  If you are able to successfully reactivate your webservices, tap on the icon of your printer wireless () and make a note of the IP address of the printer.  Then, follow these steps to configure a manual DNS:

  • Enter the printer's IP address in a web browser (Chrome, Firefox, Safari, Internet Explorer) and press ENTER to go directly to this page.
  • Click the network tab.
  • In the submenu on the left, click Networking.
  • Then click on the network (IP) address.
  • Click Manual DNS server.
  • DNS preferred as 8.8.8.8 manual entry
  • Auxiliary DNS server entry as 8.8.4.4
  • Click on apply to finalize this change.

  No none of the suggestions above restored the functionality you're looking for?  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to say "You rock!" by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support.  Have a great day!

• I get a "502 Bad Gateway" message when I try to open some Web sites on IE. How can I clear this error?

  When I try to open links to Web sites that I use every day, I suddenly get the 502 error message.  I checked to see that the internet connection leOptionsonglet has nothing checked under proxy servers.  Any suggestions?

  We can start by making sure that the PC is online. Can you access all websites at all?
  Are you able to successfully PING your gateway? You have an IP address?