I get this message windows installer
is not properly installed and also get the set up of controller has encountered a problem during installation. Please check the log files for more information about the error, what it's all about
Go to http://www.softpedia.com/get/Security/Secure-cleaning/Windows-Installer-CleanUp-Utility.shtml and download and run the Windows Installer Cleanup utility, and that should fix the problem with Windows Installer.
I hope this helps. If this is not the case, after back and let me know what happened.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Tags: Windows
Similar Questions
-
Windows Media Player
No matter what I try to play, I get this message, "Windows Media Player has encountered a problem while playing the file." And the media player does not workReset the WMP.
Step by step instructions are given here: -.
-
I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)
Hello
I suggest to refer to this link, scroll down to error code 41 and follow the steps and check if that helps:
http://support.Microsoft.com/kb/310123
It will be useful.
-
I put a new hard drive in my laptop and when I install Vista I get this message: "windows cannot configure windows to run on this hardware of computers." I can't install an oem on a new hard drive version? This is the portable original in all other respects.
original title: new hard drive and vistaHello
strange that you can request that
HP computers have been known to not let you install Vista on a non HP bought replacement hard drive
There were a few posters with this problem here
If the OEM disc for this particular laptop, you should be able to reinstall it as many times as you want as long as you have not changed the main material (the motherboard)
You can change the hard drives, RAM, etc.
I presume that you boot from the Vista DVD
-
I recently started getting this message "Windows Task Manager has stopped working
I started recently getting this message "Windows Task Manager has stopped working" I tried;
Windows Update
Restart the computer
Disabling all non Microsoft products on related Msconfig
Disk fragmentation
Malwarebytes
Full scan of the computer AVG
Safe Mode by using the command "SFC/scannow".And still no solution
Help would be appreciated
Ashley
The blue projection arrested?
You have reinstalled all Windows updates?
Do you have updated all the drivers of motherboard?
-
Title: original problems to access TV on Windows Media Center recordings
My media center has suddenly stopped working for recorded tv. Whenever I click on recorded TV, I get this message:
"Windows Media Center has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. »
All other features of the media center work correctly.
Any help would be appreciated.
Hi vater19,
Remember to make changes?
Method 1: Run the installed TV tuner Troubleshooter and check if it makes the difference
Open the Setup TV tuner Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-set-up-TV-tuner-Troubleshooter
Method 2: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 3: You can see the steps presented by Umesh P, post dated Tuesday, September 7, 2010 16:49, in the link below that relates to a similar question
http://social.answers.Microsoft.com/forums/en-us/w7pictures/thread/7b4afa49-cb84-4BF3-A306-bc0bbb5e9f70Thanks and greetings
Ajay K
Microsoft Answers Support Engineer
***************************************************************************
Visit our Microsoft answers feedback Forum and let us know what you think. -
I get this message my toolbar coating, so I can't hit send to send my email. What should I do to get rid of this message please? I have something hit by mistake?
You will find support for Windows Live Messenger in these forums: http://windowslivehelp.com/forums.aspx?productid=2
-
Original title: WINDOWS CANNOT FIND... IN VISTA
I get this message every time I try to access anything on my computer. How can I fix that, please?
Hi PamatuNoLastName
1. when exactly you get the message?
2. that you get the message using the search option?
You can check if the steps in the Microsoft article assistance provided below solve you the problem-http://support.Microsoft.com/kb/932989
I hope this helps.
-
It should affect my ability to send photos by e-mail using Kodak easysoftware. Whenever I try to send a picture, it says you must be connected to the server and I'm connected with ATT using my air card.
These wireless internet connections are generally neither strong enough nor reliable enough to update your computer.
Unplug the card (delete) the air then connect to the internet via a modem cable or ADSL (for example, to the to a friend or your local library). Now open Internet Explorer (only) to http://windowsupdate.microsoft.com . Select CUSTOM and scan | Install all security critical updates available (e.g. KB980182). If an update of root certificates is listed in the category of optional software updates on the left side of the scan results window, install it to enjoy enhanced Internet Explorer security.
NOTE: If IE8 is not already installed, do NOT install it via Windows Update! Just hide it ("don't show me this update") for now.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Why I always get this message: Windows Live Hotmail was not able to complete this application. Microsoft may contact you about this problem.
I get this everytime I want to write an e-mail. What is the problem and why I am getting the same message. Thank you.
Hello
You will need to create a post on www.windowslivehelp.com for questions and assistance in connection with the Windows Live programs and services.
-
I have a problem during the installation of Oracle Database 11 g Release 2 (11.2.0.1.0) on my 32-bit windows, I get this message: file not found C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\em.ear. It is one of many files that I should I cancel or continue? I pressed on continue in the past and I could not open properly Oracle. Sql Please HELP!
63f5a1a9-ECA2-4300-B10f-22cd940a8726 wrote:
I have a problem during the installation of Oracle Database 11 g Release 2 (11.2.0.1.0) on my 32-bit windows, I get this message: file not found C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\em.ear. It is one of many files that I should I cancel or continue? I pressed on continue in the past and I could not open properly Oracle. Sql Please HELP!
It is a symptom of textbooks classic does not have read and followed the original instructions to prepare the downloaded files. You should have two files zip files. They both must be decompressed in the same directory. If you unzip using Windows graphic interface - in right click on the name of the file and selecting "extract all...". "the default behavior will be to create a directory, the same name as the zip file and extract in it. Thus, file_1_of_2 pulls in directory_1_of_2 and file_2_of_2 extracted in directory_2_of_2. You must override this stupid behavior by default and specify the directory yourself. And specify the SAME directory for both files.
Or just go to a command prompt, change directories to the directory where the two zip files are located and deliver "unzip
" and "unzip ", and they will both be properly unpack to a directory named "database". -
Whenever I try to update, I get the message "windows Explorer has stopped working". It then seeks a solution, restarts, and immediately stops again. No error, just a constant circle of shutdown and startup code. This has happened for days. I am running windows 7.
I think that norton or mcafee may have been preinstalled as trial versions, but I've never actually used them. Unfortunately I can't use the windows Explorer, so I can't check if they are still there.
We will cover all the possibilities.
1. download each of the tools for deletion below, save it to your desktop:
Norton Removal Tool: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe
McAfee removal tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe
2. close all open applications (that is, anything with an icon on the taskbar).
3. After completing some you have a copy of your handy product key, uninstall all software (including LiveUpdate and Add-ons of Norton) Norton through Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view)
IMPORTANT! => Activate the Windows Firewall immediately after the restart.
IMPORTANT! => Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed the steps #4, #5 and #6 below!
4. right click on one of the files that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.
5. Repeat step #4 for another removal tool.
Tips:
-Online use another computer to download the removal tool, if necessary, then transfer it to the computer via CD, DVD, or a USB brand new, never been used (flash drive), or a summer freshly updated in shape.
-Online start the problem in Mode safe computer, if necessary, proceed as above.
-Online after completing all of the above, uninstall AVG Free & reboot. Now do a new installation of AVG Free 9.0, this time select the CUSTOM installation option and do NOT install (uncheck) Linkscanner Search-Shield, Active Surf-Shield, security or the email of crawl components toolbar.
Why you don't need your anti-virus to scan your email
http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm-Online download/run system update before running Windows Update again: http://support.microsoft.com/kb/947821
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I can't install my install my java because I get this message that says that my windows install is not properly installed.please help.
Hello
· You did changes to the computer before the show?
· It happens only with the installation of java or with each facility?
Problems installing and uninstalling programs on Windows computers
http://support.Microsoft.com/kb/2438651
Note: extend the question to the Windows Installer and try the steps.
-
I can't start windows Vista, I get this message: Loadkey failed with error 1016
Hello. I can't start windows Vista in all configurations. I get this message: Loadkey failed with error 1016 (sthive = 0).
I get the same message when I try normal or safe modes. The mouse and keyboard do not work. I have
don't know what to do next. Any suggestion would be appreciated. VictorHello and thanks for your reply. The problem has been fixed. I'm not exactly sure how, but that's what happened. When I'm at a screen that says "repair windows" the cursor would not move to click on proceed. When I had almost gave up and was will wipe the hard drivbe and do a clean installation of "Windows 7", I turned on the computer and got to repair screen and the cursor was somehow operable. I clicked on continue and the computer fixed itself and has been running as good as new since. The computer is 'HP' office and running "Vista".
Thank you and this problem is solved. Victor1244 -
Windows 7 starts up I get this message pop - up - incompatible software says
When I start up I get this message ' \? \C:\Windows\INSTALLER\{2B81872B-A054-48DA-BE3B-FA5C164C303A}\_94E3C704FE82FBF49A6. "EXE"
Cannot start or run due to incompatibity with 64-bit Windows version
What software that relate to I need to find to uninstall as it tells me to find the 64-bit version
Original title: incompatible software
Why would you think that it is a mandatory program? Its installation file, not necessarily a real program, it is not generally possible to install a program that is not compatible with the bit version of victory.
You can search for these strings using regedit and see what info is returned.
A simple google search returns success, indicating that it is a virus/trojan
Scan your system with all these free applications
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Maybe you are looking for
-
Hardware configuration will not work under Windows 8
Hello guys,.I'm here because I can't get the hardware configuration (v. 1.63.1.34C) working with Windows 8.I would like to know if there is a recent version more or a way to get the program to work.I can install it, yet when I open it, it just won't
-
I'm setting up Skype on my new TV and entered my Skype name and password that works fine on my computer, but don't get a message on the TV screen saying that my user name or password is incorrect. I thought at first it was because I was always connec
-
HD3000 or hd6000 - such is the question
Hello! I need a web camera and have reduced my selection or the Lifecam hd6000 hd3000 but can't decide which. The specs on the site of Microsoft Web, the only significant difference I see is that the latter can rotate 360 degrees and can not the form
-
I get the same twice fax, Microsoft Fax and Scan team
Why I get twice the same fax, name of the senders in one says: Microsoft Fax and Scan team, without sender name?
-
PIMG and AvayG3 go to the wrong mailbox
I have a system of 4.2 (1) unit which is integrated with the handler calls 4.1.3 and an Avaya G3r via pimg units. This system is in a test phase and not all Avaya and VoIP users are on this new system. Everything seems to work fine with the exception