I got a biohd-8 error code when my office made a diagnostic test.

HP Pavilion a666ot windows Vista 32 bit

Biohd-8 error test of ST 3200822as (5LJICDW3)

I installed a second hard drive to recover some files for my daughter. But the test was on my C drive; not the added disk.

Thank you

Good idea, sorry didn't us understand this completely

Tags: HP Desktops

Similar Questions

  • error code when sent for test printing after you install the new printer on windows 8

    Installed a panasonic KX-P1121E printer on windows 8. I got an error code when sending for printing of the test. And not able to print. Help, please.

    Hello

    Please provide more information for me to better understand the issue.

    1. how the printer is connected to the computer? Is it wireless or wired?

    2 do you have updated printer drivers?

    3. What is the full error message you get when you try to print?

    These steps will help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

    Method 1: check if the printer is correctly installed.

    You can check the link for more information about how to install a printer.

    Install a printer

    http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

    Method 2: you can check the link for the troubleshooting steps.

    Solve printer problems

    http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    You can check the link to download the drivers.

    http://Panasonic.NET/PCC/products/printer/windows_compliance/windows_8.html

    If please get back to us and let us know if this helps to resolve the issue.

  • 0 x 80070035 and 0X80004005 error codes when you try to connect to other computers and devices on the same network - unable to connect to the shared devices.

    I have a network consisting of Windows 7 laptop computers, an XP laptop and a Wireless Linksys (Cisco) WRT610 N + N with storage attached to it via its USB port.  Your PC Windows 7 has, since I can see and access to other computers and devices on storage.  Since Windows 7 PC B I can not connect (via the file manager) to A PC or NAS storage network.  Get such as 0 x 80070035 and 0X80004005 error codes when you try to connect to the IP address on the device name.  When I ping the devices of PC B I have no trouble to achieve.

    I turned off all firewalls, added the LMHOST file entries and a myriad of other tests and still cannot connect to PC B devices.  I can surf the net fine and do everything else - simply cannot connect to other devices even if these other devices can connect to me.

    I was in there for 22 years and has worked as an engineer on major networks and the network I stem - anyone got any idead. I checked all the basics such as Netbios, file sharing etc etc.

    It took a reinstall (upgrade) to get actually it works again.

  • Received the 0xC00D0FEA error code when you try to play mp3 file of hotmail message.

    I received a 5.6 mb audio recording of my brother's gmail account, and I got the 0xC00D0FEA error code when I tried to play in WMP12.

    My OS is Windows 7 Professional.

    I also tried to download the file, but do not have the option to save it in a media file. Help, please.

    Thank you

    Hello

    1. are you able to play other files on the computer using Windows Media Player?

    2. are you using Internet Explorer? If Yes, what version of IE are you using? Find out what version of Internet Explorer you are using

    http://Windows.Microsoft.com/en-us/Windows7/find-out-which-version-of-Internet-Explorer-youre-using

    You can save the file to the desktop and then right click and select play with Windows Media Player a check if it works.

    Check this C00D0FEA

    Answer with the information required for you help in this matter.

  • R12.2.5 Installation on OL 7.1 ERROR: RW-50010: error:-script returned an error: 1 RW-50004: error code when you run the external process.  Check the log file for more details

    I tried to install EBS 12.2.5 on OL 7.1 with rapidwiz and got this error when applying the unique patches in second File System

    "Second system logfile file - /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/logs/12021641.log.

    LOG FILE:

    _____________________________________________________________________________________________________________________________

    Step 0-8

    Command: /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/adrunfmw.sh

    Step 4 of 8: UNIX making pretreatment

    Running: chmod 777/db/oracle/OraInventory r

    chmod-r 777/db/oracle/OraInventory succeeded

    Step 4 of 8

    Performance: known appltest - c "/ app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/adrunfmw.sh".

    PHASE of INSTALLATION has BEGUN: APPS TECH STACK: Wed Dec 2 17:27:07 IST 2015

    runProcess_1

    StatusString installation of Applications Technology Stack

    Copy the temp area models

    Inventory name is: app_oracle_TEST_fs2_Oracle_EBS_app

    One-time fixes copy to temp area

    Remove JDK_TOP: / app/oracle/TEST/fs2/EBSapps/comn/util/jdk32 if there is

    / App/oracle/TEST/fs2/EBSapps/comn/util/jdk32 deleted directory

    Installation of WebLogic Server.

    With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWLS.xml

    L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWLS.xml oracle.apps.fnd.txk.config.InstallService

    WebLogic Server successfully installed

    Web Tier utility installation.

    With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWeb.xml

    L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWeb.xml oracle.apps.fnd.txk.config.InstallService

    Level successfully installed Web utilities

    Registration EBSUsing /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instEBS.xml

    L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instEBS.xml oracle.apps.fnd.txk.config.InstallService

    EBS registered successfully

    Rename/home/appltest/bea/beahomelist in /home/appltest/bea/beahomelist.29266 to avoid problems during WLS

    patching

    / Home/appltest/Bea/beahomelist renamed successfully.

    Application of ad hoc patches

    With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instASpatches.xml

    L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instASpatches.xml oracle.apps.fnd.txk.config.InstallService

    Fatal error: T2K install Service

    oracle.apps.fnd.txk.config.ProcessStateException: OPatch process failed: Output = 1 see log for more details. CMD = perl /app/oracle/TEST/fs2/FMW_Home/webtier/OPatch/opatch.pl apply - verbose - silent - ocmrf /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd/admin/template/txkForms_ocm.rsp jdk - / app/oracle/TEST/fs2/FMW_Home/webtier/jdk/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/patches/7695070/7695070

    at oracle.apps.fnd.txk.config.OPatchActionNode.processState(OPatchActionNode.java:312)

    at oracle.apps.fnd.txk.config.PatchActionNode.processState(PatchActionNode.java:187)

    at oracle.apps.fnd.txk.config.PatchNode.processState(PatchNode.java:338)

    at oracle.apps.fnd.txk.config.PatchesNode.processState(PatchesNode.java:79)

    at oracle.apps.fnd.txk.config.InstallNode.processState(InstallNode.java:68)

    at oracle.apps.fnd.txk.config.TXKTopology.traverse(TXKTopology.java:594)

    at oracle.apps.fnd.txk.config.InstallService.doInvoke(InstallService.java:224)

    at oracle.apps.fnd.txk.config.InstallService.invoke(InstallService.java:237)

    at oracle.apps.fnd.txk.config.InstallService.main(InstallService.java:291)

    Can not install the unique patches

    RW-50010: error:-script returned an error: 1

    RW-50004: Error Code when you run the external process.  Check the log file for more details.


    It was recorded in /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/logs/12021641.log and I don't know how to find another newspaper for such details as mentioned in this journal. Please help me with that.


    Concerning

    KasunA

    Found a workaround.  The problem is that, before the 7695070 patch is applied, the installation program backup directory/apps/fs2/FMW_Home/webtier/jdk in /apps/fs2/FMW_Home/webtier/jdk_backup_existing_version, but then it clears. / jdk - the patch fails because it can't find it.  I had to rename the directory of the jdk for jdk2, and as soon as it gets deleted quickly and rename jdk2 jdk.  Then he applies the patches without problem.  A symbolic link would do the same thing.

  • I got a 150:30 error message when try to start Elements 8.0 and asked to contact Adobe support. trying to do that led me here.

    I got a 150:30 error message when try to start Elements 8.0 and asked to contact Adobe support. Trying to do that led me here.

    Can I get help here?

    Thank you

    Harry

    Try the solutions here:

    https://helpx.Adobe.com/Creative-Suite/KB/error-licensing-stopped-Windows.html

    I know he says Creative Suite, but PSE is based on the same code, so a lot of the same fix works for both.

  • PC Doctor BIOHD-2 error code

    HP Pavilion FK484AV-ABA, model m4900t running windows 7 64 bit. The RAID-1 configuration.

    PC crashed. Cannot restart. Starting cold, received error message failure of RAID-1 and two hard drives. PC-Doctor ran and received the following diagnoses:

    Processor, memory, drives hard all OK.

    Diagnosis of startup path

    Error code: BIOHD-2

    ATTENTION: No disk is detected.

    Suggestion: Turn off the system and check the drive cables are attached firmly.

    Given that the PC-Doctor verified that both drives are OK, I'm assuming that the cables were also OK. Any suggestions on what may be the problem?

    Thanks in advance for your help.

    Go into the BIOS to see if the discs are recognized. Post your results here.

    This is an unusual condition for PC Doktor to report. Normally a BIOHD-2 error code means that a hard drive has failed, but I have no doubt that both drives failed at the same time.

  • I get 656 error Code when I try to download my updates to the windows desktop.

    I get 656 error Code when I try to download my updates to the windows desktop.

    Do you mean * 646 *?

    See:

    http://support.Microsoft.com/kb/2258121

    Very popular.

    TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

  • 646 error code when I try to update the following.

    Update of security for Microsoft Office Word 2007 (KB2251419)

    Download size: 8.9 MB and

    Update of security for Microsoft Office System 2007 (KB2277947)

    Download size: 2.0 MB

    You may have to restart your computer for this update is taken into account.

    Update type: Important

    A security vulnerability in the 2007 Microsoft Office System and the Microsoft Office Compatibility Pack that could allow arbitrary code to run when opening a file modified for malicious purposes. This update resolves this vulnerability.

    More information:
    http://support.Microsoft.com/kb/2277947

    Help and Support:
    http://support.Microsoft.com/?ln=en-us

    You may have to restart your computer for this update is taken into account.

    Update type: Important

    A vulnerability of security in Microsoft Office Word 2007 that could allow arbitrary code to run when opening a file modified for malicious purposes. This update resolves this vulnerability.

    More information:
    http://support.Microsoft.com/kb/2251419

    Help and Support:
    http://support.Microsoft.com/?ln=en-us

    I tried update 15 times and it continues to fail. I also downloaded the two files separately and they still stop at Midway through the update. I also tried the advice given here. There will be nothing of these updates no matter what.

    Here is the notice that has been developed for your error Code:

    Error 646:

    http://support.Microsoft.com/kb/2258121/en-AU

    You receive the error code 0 x 80070646 or 646 error code when you try to install Microsoft Office updates

    http://www.Microsoft.com/downloads/en/default.aspx

    Also, try to put the KB numbers in the search at the above link > then download them manually.

    If the above does not solve it:

    Windows Update Forum:

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon

    Mick Murphy - Microsoft partner

  • 8007000D error code when you install Service Pack 2

    I get the 8007000D error code when you try to install service pack 2 for vista and I don't know what to do someone else help me with this

    Thanks for the advice I did was download SP 2 separately (no Windows Update) and installed on the computer and it worked perfectly thank you a lot

  • I get a 0xD0000006 error code when tring to use windows update

    I get a 0xD0000006 error Code when you use the default of windows update Setup

    d0000006

    Code: Error_Invalid_Handle - a possibility - bad hard drive

    Maybe a problem with a hard disk - important files may appear on the bad blocks.

    Try to run the "chkdsk/r" command at the command prompt

    You must open the command prompt by typing "cmd" in the start menu-> Run

    TaurArian [MVP] 2005-2010 - Update Services

  • I'm Zenith one 733F error Code when I try to install Windows Vista update to SQL Server 2005 (Service Pack 2 KB970895).

    I'm Zenith one 733F error Code when I try to install the latest Windows Vista Update, which is an update to SQL Server 2005 (Service Pack 2 KB970895).  This update has failed several times now.

    I followed the advice given in a separate post in this forum at Ramer49 to perform a selective startup with msconfig to try to run the update with all Microsoft Services disabled.  This does not solve the problem.

    I spent reviewing the logfile under C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB970895_sqlrun_sql.msp.log.  The problem highlighted is that the Services of Services SQL2005 database program did not start.  Here is an excerpt from the log file...

    Product Installation status
    Product: SQL Server Database Services 2005 (MSSMLBIZ)
    (Previous) product version: 3077
    Version of the product (Final):
    Status: failed
    Log file: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB970895_sqlrun_sql.msp.log
    SQL Express features:
    Error number: 29503
    Error description: error MSP: 29503 The SQL Server service could not start. For more information, see the

    I tried to run the problem file (SQL Server MSSMLBIZ) directly by using the Windows administrative tool, but the file does not seem to start successfully.  Event Viewer log contains an error with event ID = 823.

    I don't know what to do next.

    Can someone help me?

    Thank you.

    Take a look at this link as it covers a way to fix this problem. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

    • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

      I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

      Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

      OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

    keimanzero,

    Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
    First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
    NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

    Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
    Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

    Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

    Secondly, I suggest that you run the File Checker system while in the same clean boot state.
    To run the System File Checker tool, follow these steps:

    1. Click Start and type cmd in the field search programs and files .
    2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
      If you are prompted for an administrator password or a confirmation, type your password or click on continue.
    3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
      sfc/scannow

    When the analysis is complete, test to see if the problems facing the system have been resolved.

    If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

    Expert MowGreen Windows IT Pro - consumer safety

  • Error codes when you use windows update 0 x 643

    Error codes when you use windows update

    Received error code 0 x 643 during the installation of update for Visual C ++ 2010 (KB2467173). What should I do?

    Hey Joe,

    You can check if this article helps.

    You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update

  • Windows live gives me a 0x80040a15 error code when I want to open a picture

    Windows live gives me a 0x80040a15 error code when I want to open a picture

    Windows live gives me a 0x80040a15 error code when I want to open a picture

    =================================
    Maybe the exclusive database is corrupted.

    Read the following article.

    (944221) freezes Windows Live Photo Gallery
    or does not start
    http://support.Microsoft.com/kb/944221/en-us
    (according to version, database can be
    Pictures.PD4, Pictures.pd5 or Pictures.pd6)

    Rename the Pictures.OLD file will force Live Photo
    Gallery to create a new database on the next launch file.

    Know that the gallery will be as it was the first time that you
    open and some metadata and labels may be lost.

Maybe you are looking for

  • SPU Download Manager

    I have a DCR-DVD camera 300. I am trying to run the SPU Download Manager. Instructions said "With Windows 7, you may need to change the USB mode of the product to the mass storage Mode." How can I do this? My screen LCD says only "USB Mode". When I c

  • Most recent OS, can I run?

    What is the newest operating system can I run with a 2.66 GHz Intel Core 2 Duo Processor and 4 GB of memory?

  • WIDI lenovo Z500

    Hi lenovo partisan and all users About 2 months ago, I bought z500, now I want to install widi Milkeficent but I n ' found in DVD player Please help me best regurds

  • I'm confused as to what versions of Windows will continue to be supported.

    I'm confused about the news in http://windows.microsoft.com/en-us/windows/products/lifecycle what it means that the product ex: windows xp sp2 or sp1 or the first version of xp, is abondonware... a lot of people can download is freeware and can be us

  • Information about the JPEG file.

    Hi all! To see if you could help me with this... I´d would like to know if there is a way to get the information on the resolution and so on to the right of the JPEG file. Wise thanks!