I got: "STOP: 0x0000007B when you try to install Windows XP.»

I want to install windows xp on my computer

Hello, I have a toshiba L755D-S5204, I have win 7 on it, but I want to install win xp and I can not install win xp on it... i received: "STOP: 0x0000007B (0xF78D2524, 0 x 0000034, 0x00000000, 0x00000000)", how can I install the windows xp.please tell me

You will need the storage controller or SATA/Raid drivers. Otherwise, you might be able to go into the bios and disable the AHCI or enable IDE or run in native mode. One of those who should be an option.

Tags: Windows

Similar Questions

  • blue screen STOP 0x0000007B when you try to install Windows XP

    I replaced my SATA hard drive with a new and tried to load my Windows XP disc. Error message Stop came

    The message was:

    "Stop :) X0000007B (0XF78D2524, 0XC0000034, 0x00000000, 0x00000000) it says to check for viruses and remove all new hard drive. It is a new hard drive. What I can do. Thank you

    Hi Pete Hegs.
     
    Try the methods listed in the section below to resolve this issue:
     
    Additional reference on:
  • When you try to install Windows Defender I get an error message "Service"Windows Defender"(WINDEFEND) could start. Make sure you have sufficient privileges to start system services.

    Original title: could not start the Service "Windows Defender" (WINDEFEND)

    When you try to install Windows Defender, I get an error message that

    "Service"Windows Defender"(WINDEFEND) was able to start. Make sure you have sufficient privileges to start system services.

    How can I check which privileges I have and I need?

    I noticed in the management of the tasks that Norton symlcsvc.exe ran and I was wondering if it was who collide with the Defender, so I temporarily stopped Symantec process running in the field of Services, but still had the same result, try to run the installation of the Defender.

    Help please

    Hello

    This error message is because you have Norton installed on the computer. See the for more information section below.
    http://www.Symantec.com/business/support/index?page=content&ID=TECH103119&locale=en_US

    Let's try the steps and check them off below if it helps.

    Step 1: You can try to uninstall Norton and then check if the problem persists.
    Note: Reinstall Norton after verification.
    Reference: http://support.microsoft.com/kb/307895

    Step 2: Change the registry value and check.

    a. Click Start, type regedit.exe and press ENTER.
    b. navigate to the following location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Defender\
    c. right-click on DisableAntiSpyware, on the right panel, then selectEdit.
    d. enter 0, under value data, and click on the OK button.
    e. close the registry editor.
    f. restart the computer.

    Registry warning:
    Important
    this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

    Thanks and greetings
    Umesh P - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

    I got an error message in step 2 of configuring updates - "updates were not correctly configured.  Returning from changes' anyone can help solve this problem?

    Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
    http://support.Microsoft.com/kb/949358

  • I get the following error message when you try to install Windows Live Essentials for Windows 7-64-bit: __One installation files seems to be corrupted. HR:0 x 80070003

    I get the following error message when you try to install Windows Live Essentials for Windows 7 64-bit:
    One of the installation files seems to be corrupted. HR:0 x 80070003

    Hello Amawob,

    Thank you for using the Microsoft answers Forums.

    Solution:

    Follow the steps in the web link below.

    You cannot install some programs or updates.

    http://support.Microsoft.com/kb/822798

    Reset the Windows Update components.

    http://support.Microsoft.com/kb/971058

    That should solve the problem for you.

    Thank you.

    UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

  • When you try to install windows update I recive 0 error code 80070424 x

    When you try to install windows update I recive 0 error code 80070424 x

    Hello

    You can follow this link & check if the problem persists:

    Error message 0 x 80070424 when you use Microsoft Update or Windows Update Web sites to install updates, or when you start Windows Firewall

    Hope the helps of information.

  • Product ID invalid when you try to install Windows XP on VMware.

    XP installation of VMware

    Hello

    I have a PC under win 7. and I am trying to Flash an old router to wireless access point for a spot of dead in my house. To cut a long story short, I need to Flash the router using a software program that does that on XP (I tried the compatibility options in Windows 7 and it does not work). Then I put on the implementation of a virtual machine using VMware and an old copy of XP, I had. However, when I try and install XP I get the error that the product id is not valid. Now, I know that the software is legitimate - it was part of a XP operating system provided with an HP laptop - so my question is how I can get through the installation? I will not buy another XP code - after all I will ever use again once I finished the flash - and for the same price, I could buy a new router!. I just want to save the Earth, a small piece of discharge potential and save myself $20!
    Any help appreciated
    M
     

    Hi MarkPinches,

    Follow the steps in the article.

    You receive an error message after you enter the product key when you try to install Windows XP

    http://support.Microsoft.com/kb/310637

    If the problem persists, contact VMware support for more help and information.

    http://www.VMware.com/support/

    For reference:

    How and when to contact Microsoft and support Customer Service

    http://support.Microsoft.com/kb/295539

  • I get error 80070490 Windows updates when you try to install Windows Vista service pack 2.

    error 8007090

    I keep getting the error 80070490 update of the window when you try to install windows vista service pack 2. help Windows and support suggested that I insert the windows dvd the disk drive but I don't have a disk with my computer. I chose automatic convenience store on the microsoft support site. but I still have the same problem

    Hello

    Are you sure this is the error Code?

    And not this one?

    It is the opinion of Microsoft about the error code 80070490.

    'You receive a "0 x 80070490" error code when you use Microsoft Update or Windows Update Web sites to install updates'

    http://support.Microsoft.com/kb/958044

    Method 1: run (Checksur.exe) system update readiness tool

    1. Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

      For more information on how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base: 947821

      (http://support.microsoft.com/kb/947821/)

      Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

    2. Try to install updates again.

    Method 2: perform a Windows repair installation

    If method 1 does not resolve this problem, you can perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

    If you do not have a DVD of Microsoft Vista, you will need to borrow a DVD of Vista Microsoft from a friend or work acquantance to do a repair upgrade Installation.

    "This has occurred as soon as I updated from Windows XP"

    You have the upgrade DVD?

    Here is a tutorial on how to do it:

    "How to perform a repair for Vista Installation"

    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    See you soon.

  • When you try to install Windows Service pack 3, I get an error code 517.

    Original title: update to Service Pack 3

    When you try to install Windows Service pack 3, I get an error code 517.  What is & how to fix it?

    Hello

    1. where did you get the service pack 3 for windows vista?
    2. which service pack is currently installed on the computer?

    There is no service pack 3 for windows vista. The latest service pack for vista is service pack 2.

    The following articles could be useful.
    How to obtain the latest Windows Vista service pack
    http://support.Microsoft.com/kb/935791
    Service Pack Center
    http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

  • get 80071AA7 error code when you try to install windows vista sp1

    get 80071AA7 error code when you try to install windows vista sp1

    80071AA7 ERROR_FILE_IDENTITY_NOT_PERSISTENT
    The file could not be opened from a transactional point of view, because its identity depends on the result of a unresolved transaction.

    (1) If you have the Vista installation DVD making an 'upgrade on the spot"(aka repair facility)
    How to perform a repair for Vista Installation

    All personal data will be kept. All updates applied previously will need to be reinstalled.

    (2) do a clean reinstall of Vista. All the personal data will NOT be preserved.

    3) click this link to launch a request for assistance from Microsoft by Chat or email: Windows Vista Service Pack 1

  • 64 c the error code when you try to install windows update kb2505591

    Why do I 64 c error code when you try to install windows update kb2505591

    Hello

    The kb2505591 is for the download of Bing Bar 7.0.

    You can try the methods provided below to solve the problem and then try to download the update for Windows.

    Method 1:

    I suggest to reset the Windows Update components and check if that helps resolve the issue.

    http://support.Microsoft.com/kb/971058

     

    Method 2:

    Follow the instructions in the link below to rename software c:\windows\system32\catroot and distribution records and try to install the service pack.

    You cannot install some programs or updates

    http://support.Microsoft.com/kb/822798

    If the methods above do not help then try to download Big bar 7.0 maually starting from the link provided below and check if the problem persists.

    http://support.Microsoft.com/kb/2505591

  • Blue screen when you try to install Windows XP Home Edition on Satellite L350D-11 has

    Hello
    When I try to install Windows XP Home (including SP3) on my new L350D-11 has a blue screen after loading the drivers.
    When booting with Kubuntu Live CD (8.x) appears an error message: / sbin/modprobe out anomalous.

    At least I need Windows XP because of some programs that do not work under Vista. Is it possible to install XP?

    Hello

    Hmm I think the BSOD appears because you didn t add SATA drivers in the Win XP operating system.

    However, you can try to install Win XP on your laptop without the use of the SATA driver, but you can change the SATA AHCI in the BIOS in compatible mode.

    Check it out!

  • Windows Server 2012 0 x 3701 - when you try to install Windows Backup

    Hello:

    Thanks in advance for any help you can provide.

    Windows 2012 - build 9200 - when I try to install Windows Server Backup - I get the error "the installer has encountered an error - 0 x 3701.»  The referenced assembly is not found.

    Outside the GUI installation, I tried the command line "ocsetup WindowsServerBackup" - I get the same error.

    Any help would be appreciated.

    Rafel

    You would be better served in the Technet/developer forums.  As you have no doubt noticed when choosing your category as the other/unknown - it is a final consumer - not a business oriented one oriented forum.  :-)

  • Blue error screen "stop0x0000003E" appears when you try to install windows vista (R) service pack 2 - that's what I've shown in after I try to install the update? is this a problem or not?

    The problem I have is listed on the feald above, but there are once more my question: blue screen "stop0x0000003E" error when you try to install the service pack of windows vista (R) 2.

    Free unlimited installation and compatibility support is available for Windows Vista until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Error 0 x 80070103 when you try to install windows vista

    I have windows xp media center edition version 2002 with service pack 3, when I try to install windows vista home basic he said: I do not have enough memory for temporary files and I should free space on my drives. What exactly should I do? I don't have much on my computer to begin and I already uninstalled all unnecessary files, I could think of. Any help would be appreciated thanks.

    Hi sargent_bilko,

    Please use the forum for Support of Vista,

    What is your hard drive? Did you check how much free space on your hard drive?
    Please run the Vista Upgrade Advisor before trying to upgrade to identify your problem:

    http://www.Microsoft.com/Windows/Windows-Vista/get/Upgrade-Advisor.aspx

    Let us know the result of Vista Upgrade Advisor, Kevin
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • update the BIOS for Hp 1000 1111tu

    I have 1000 Hp 1111Tu notebook and I want to update my BIOs, but I'm afraid it will damage my notebook.please teach me the steps in the order that will not harm my motherboard. Thanks for the solution

  • Nikon Tethering with Lightroom CC

    I am a professional studio photographer. I've recently updated to El Capitan and because the update have a problem with my Nikon DSLR to my home iMac.  Anyone has any info regarding when Apple will have a fix for this. Thank you Paul

  • Panel to freeze after moving on graph

    Hi all I have a VI with a graph and various controls. The user configures the settings and see the results on the graph by using a loop of events and then press start. Once you press start, the block schema leaves the event loop and executes the acti

  • Receive the error number: 0 x 80070424 to access Windows Update site.

    Error code are not in codes known, but seems to be related to a service that is stopped. The service does NOT start when the system is restarted.  This system needs to be restarted, and what commands Windows XP restarts?

  • Is it possible to read books Kindle app without being connected to the internet.

    Is it possible to read a book on a Microsoft Surface using the Kindle app without being connected to the internet?