I got the blue screen with STOP error: 0x0000008E (0xC0000005, 0xB9E28ABA, 0xAA319AE4, 0x00000000).

Similar Questions

• I get a blue screen with STOP error: 0x0000008e

  Original title: blue screen error

  I have the blue screen error 0x0000008e (0xc0000005, 0x81e781a7, 0x8c92791c, 0x00000000) on windows vista and I can only boot into safe mode. I don't have the copy of vista because the computer came with it installed. I just ran recienly defender of windows on it offline and that's when it started.

  Hello

  I would suggest trying the following methods and check if it helps.
  Method 1:
  Start in safe mode and put the computer in a clean boot state, and then start in normal mode and check if the problem persists.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135
  Note: Once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Method 2:
  Start in safe mode and then restore the system if it took place recently and check if it helps.
  System Restore: http://windows.microsoft.com/en-US/windows-vista/products/features/system-restore
  Warning: once you are restoring the system to safe mode you will not be able to undo the system restore.

  
  Hope the information is useful.

• I put the machine into hibernation and when I restarted, I got a blue screen with stop: 0 x 00000024. Restart gave a different stop error message: 0 x 00000050.

  Original title: Blue screen problems - Stop 0 x 24 and 0 x 50

  I'm not being updated hardware or software on my Dell Latitude D8380.

  I ran the Windows tool to check if the laptop is suitable for upgrading to Windows 7, but did not install any software.

  I put the machine into hibernation and when I restarted, I got a blue screen with stop: 0 x 00000024 (0x001902fe, oxba4f7948, 0xba4f7644, 0xb9d31ae8) ntfs.sys address b9d31ae8 base at bpcef000, datestamp h8025be5.

  Restart gave a different stop error message: 0 x 00000050(0xffffffff,0x00000000,0xba1bef42,0x00000000) i8042prt.sys address ba1bef42 base at ba1b8000, date stamp 48025c 67.

  Please can you help. Thank you, Sue Dixon

  Hello

  Step 1: Check if you are able to boot in safe mode. If you are able to boot into safe mode, and then try to perform the clean boot to safe mode and check.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Run the check disk hard disk command. (You will be able to try this step if you are able to start in safe mode or in normal mode with success)

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Let us know the status of the issue.

• Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Hi ipitedafoo,

  You can check if this article helps.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  See also:

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

• Blue screen with STOP error 0x0000007B (0xBA4CF524, 0xC0000034, 0x00000000, 0x00000000)

  I have my Acer 5920 laptop, 2 GB of RAM and 160 hard drive, last stop system time correctly with all the files to day, but when I restart then comes windows XP Jean-Christophe and then a blue screen with the error. Nor I have install new software or remove something in the laptop. My system was perfect, and that was before the last stop.
  I have Windows XP SP2-teacher-pack. I have the original CD of this package.
  But when I use the CD then nothing is happen and come same messgae of error. I do not have any other CD bootable for windowXP except your originalCD.
  Please suggest me what I should do to fix my probem. I'm not to much expert for the formatting and other things computer.

  After reading your following suggession:
  Here are a few things to try:
  The first thing to do is to boot your system and start pressing F8 as soon as it starts booting.  You will get the Windows startup options screen.  Select "Disable automatic restart in the event of system failure" and let it restart.  When it starts, it can now stop with an error screen and give an error message and code.

  Disconnect all external devices (printers, USB Hub, drives external, etc.) and try to start.

  I got the result of the error that comes on a blue screen after you follow your process-blue screen with STOP error 0x0000007B (0xBA4CF524, 0xC0000034, 0x00000000, 0x00000000)

  Thanks in advance for help
  What about nice Rajneesh

  Just one quick response for others...

  Go to your bios to change the mode of training of your s - ata AHCI or IDE Compatible mode or all that apply :) Windows XP is not like SATA, because it has no native support for it. At the start of the second phase of a Setup program, it would fail with this BSOD.

  Also read the following Microsoft article that describes many other causes (including file system damage):Troubleshooting of errors "Stop 0x0000007B" in Windows XP Advanced

  Sometimes, your BIOS will provide its default settings after a system crash or a configuration. Should not happen, but it is...

  For BIOS-discussions, see: 0x0000007B 0xBA4cf524 - Forum of Support PC - Free Computer help , XP installation: * STOP: 0x0000007B (0xF78D2524, 0xC0000034, 0x00000000, 0x00000000)? - Page 4 - Cyber Tech Help Support Forums , 0x0000007B (0xBA4CF524 - Google zoeken .)

  Have fun, and... Peace!

  Devvie

  ~ ~ ~ * E-mail address is removed from the privacy * ~ ~ ~

  CONARE nullius momenti videri fortasse missilibus careant
  ------
  All the spelling mistakes are my own and may not be distributed under the GNU General Public License! -(© 95 1 by Coredump; 2-10 by DevNullius)

• How can I stop blue screen with stop error code (0x00000002, 0x00000000, 0x804e70ed)

  How can I stop blue screen with error code stop 0 x 00000050 (0xf05c371c, 0 x 0, 00000002 00000000, 0x804e70ed)

  If you are not real tied to the current installation of Windows - then a cloth and then reinstall are the best way to see if you can fix this

  Here's a suggestion on how to do a 'clean ': install
  [quote]
  For testing purposes, it is best to install Windows "clean".
  It is, basically, install the way that Microsoft intended (with the drivers from Windows Update).
  This procedure is for Windows 7, Vista is similar (but has 2 service packs)

  You will need your installation/recovery DVD (s) before you start.  Once you wipe the hard drive, there is no going back!

  1 back up all your data.
  It will wipe everything off of your hard drive, so what you want to keep should be backed up elsewhere.

  NOTE: If this is due to an infection, remember to analyze the data with current antivirus to another system to locate and remove malware.

  2. connect the system to the internet (if the system shows then disconnect from the Internet, do).

  3. use one of these free utilities to wipe the hard drive:
  DBAN ( http://www.dban.org/download )
  KillDisk ( http://www.killdisk.com/downloadfree.htm ).
  This will also remove the system recovery partitions - so the installation/restore DVD is essential!

  4 install Windows by booting from the installation/recovery DVD - DO NOT change any settings!

  5 visit Windows Update and get all updates

  6. check device for all unknown/disabled devices Manager - if there are unknown disabled devices, secure them with the latest drivers from the website of the manufacturer of the device (not the PC manufacturer)

  7 visit Windows Update and download the Service Pack 1 (normally under important updates).  Read these notes for installing SP1: http://support.microsoft.com/kb/2505743

  8 visit Windows Update and get any other available updates

  9 download, install and update a free antivirus, so it does not get infected during the test ( http://www.carrona.org/freeav.html ).

  If problems persist, then the problem is probably with your hardware.

  Warning: If you have an Asus motherboard, check the date on the file C:\Windows\System32\driver\ASACPI.sys.  2004/2005 is a problem, 2009,2010 is OK.  Updates are available on the Web from Asus site.

  Warning: If you have a Sony system, make sure that you do NOT have the 2007 version (or earlier) Extension of Firmware of Sony Analyzer (SFEP.sys).  To update this driver immediately!
  [/ quote]

• The blue screen with stop continues to appear randomly and everything closed options.

  using screen blure xp2000-The windows guard poop upward and it stops even the task manager.it destroyed my work and everything is open :( Can someone tell me how to stop this blue screen please?

  sounds like a virus.

  first things first - make a complete AV scan - then download superantispyware and do a full scan.

• I got the blue screen: Driver_IRQL_NOT_LESS_OR_EQUAL

  I got the blue screen with the error message following (Windows XP) "Driver_IRQL_NOT_LESS_OR_EQUAL. How to eliminate this problem?

  Repost...

  Follow the instructions in this post of mine in another forum (to-the-letter & in order! ) to restore your computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

  The above reference includes...

  
  HOW TO get a computer that is running Windows XP Gold (no Service Pack) fully corrected after a clean install
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer running WinXP SP1 or SP2 fully-patched after an installed cleaning
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b
  

• BSOD STOP ERROR 0X0000008E (0XC00000005, 0X8206CCC7, 0X98FBD91, 0X00000000

  System information: Kit installed: 8.0.0.1039 Kit install history: 8.0.0.1039 Shell version: 8.0.0.1039 OS name: Mircosoft Windows Vista Home Basic OS Version 6.0.6002 Service Pack 2 Build 6002 name NATALIA-PC system Manufracture Toshiba system system model Portable PC processor Intel (r) Pentium (R) DualCPU T3200 @ 2.0 GHZ - BIOS Version/Date INSYDE 1.30.-10/09/2008-langue English a problem has been detected and windows has shut down to prevent damage to your computer. If this is the first time, you've seen this stop error screen then restart your computer if this screen appears again. Follow these steps... Make sure you have space adeqate... If a driver is identified in the stop message, disable the driver or check the manufracture for driver updates... Try changing video cards... Check your hardware for the updates to the BIOS... Disable BIOS memory option such as caching or shadowing him... If you need to use safe mode to remove or disable components restart your computer press F8 to select advanced startup options, and then select Safe mode.    Technical information: STOP error: 0x0000008E (0xC0000005, 0x8206ccc7, 0x98FBD91c, 0x00000000) OTHER PROBLEMS IE opens off the screen...   ERROR 2013 disk is near capacity... STOP0x00000000A ERROR caused by Fcascsi.sys driver... Event caused SNA SERVER failure... Code19... Code37... Code31... Code39... SNA serverexecption0. C0000194 error cmicnfg.cpl... Internet application error in windows media player... Cannot install install shield 1607... Executing script... Impossible to open a new window by hyperlink IE... Unable to update windows online... Windows Update does not work! I tried the system restore, startup repair, cleaning disc, memory dianostics, check the disc and more without success to get windows to start normally. THIS PROBLEM HAS BEEN ONGOING SINCE JUNE 30 AND HONESTLY IVE TRIED EVERYTHING TO FIX PROBLEM & IM AT END & IT SEAM BECOMES ONLY THE PROBLEM WORSE CORUPTING OTHER PROGRAMS PLEASE PLEASE PLEASE HELP! Thank you

  Hello

  Update your driver, BIOS and any software of control and then work through the troubleshooting services
  above if necessary.

  Could be a nuisance pilot. Update your drivers manually looking at system manufacturer and
  Sites of the manufacturer of the device.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it) and
  Then, get new ones manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I got the Blue Screen Of Death with Stop: 0 x 00000024 (5898 0x86D4, 0xC0000102, 0 x 00190203, 0 x 00000000)

  Original title: Help, I got the blue screen of death!

  Can someone help me please? Whenever I turn on my computer, it goes to the BSOD. I tried the last settings that worked, but he went to the BSOD too! In addition, safe mode it won't work goes to the BSOD as well. Nothing works. I have to go to a computer store to fix it, or is - it possible to fix it at home? Please help immediately!

  The BSOD I get says:

  A problem has been detected and windows has shut down to prevent damage to your computer.
  If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: disable or uninstall all utility defragmentation or anti-virus disk backup,. Check the configuration of your hard drive and check the updated drivers. Run CHKDSK /f to check for hard drive corruption, and then restart your computer. Stop: 0 x 00000024 (5898 0x86D4, 0xC0000102, 0 x 00190203, 0 x 00000000)

  Hi TheCookeNinja,

  I suggest you run the check disk (chkdsk) of the Recovery Console & check if you are able to boot to the desktop correctly.

  Step 1: To start the Recovery Console, you can follow this link.

   

  To start the computer and use the Recovery Console

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_overview.mspx?mfr=true

  Step 2: At the Recovery Console prompt, type the following command and then press ENTER:

  CHKDSK [/ p]: [/ r]

  Note: At first, try to run chkdsk/p & check if it helps. Later, you can run chkdsk/r.

  Reference:

   

  How to install and use the Recovery Console in Windows XP

  http://support.Microsoft.com/kb/307654

  I hope this helps.

• Blue screen with an error: process1_initialization_failed "stop: 0x0000006B (0xC0000020, 0 x 00000003, 0x00000000, 0x00000000).

  OT: Boot to Vista.

  Hello everyone,

  I have a laptop running Vista which is not booting to windows at all. I tried repair disk installation which stops at a blue screen with an error: process1_initialization_failed

  Lowest:

  Stop: 0x0000006B (0xC0000020, 0 x 00000003, 0x00000000, 0x00000000)

  Y at - there anyone who can help?

  Thanks in advance :)

  Hi Nikita,

  Try the following link that will help solve your problem:

  You receive "0x0000006B" and "0XC000021A" Stop error message after you uninstall McAfee Agent 4.6.2 in Windows Vista, Windows 7, Windows Server 2008 or Windows Server 2008 R2:

  I hope this helps. Please let us know if you need assistance.

• Cannot change anything in the action center error code and the blue screen and stops.

  I can't do anything on my computer with windows7 can not install updaets or sofyware of security I get an error code and the blue screen and stops

  OT:everytime I try to change anything whatsoever in the action center ndour windowws blue security and my computer shuts down

  Hey Chrisb,

  You did changes to the computer before the show?

  Step 1: I suggest to start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• I tried to update with windows and got the blue screen?

  Once the download is complete, I got the blue screen that makes the computer to restart. Once it reboots it works fine however in the lower corner
  to the right of the screen, I still see a yellow shield with black exclamation point saying "updates are ready for your computer" Please
  Click here for updates. The computer is a Windows XP and what I can do about it?

  Kind regards
  Ted

  Help us help you: start by reading this post 'sticky '...

  What information to post in the Windows Update forum
      http://answers.Microsoft.com/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

• We had a power outage in our area, the computer was on and running, got the blue screen of death with the following: __0x000000C2, 0 x 00000043, 0xD6C61000, 0 x 00000000, 0 x 00000000 BAD POOL CALLER

  We had a power outage in our area, the computer was on and running, got the blue screen of death with the following:
  0X000000C2, 0 X 00000043, 0XD6C61000, 0X00000000, 0X00000000 BAD POOL CALLER

  If you have not saved your data and you want to start the computer with Linux Livecd such as Knoppix and copy your data files on an external hard drive. It is a precautionary measure before the step follows because things happens. ;-)

  Then do a repair installation.

  http://www.michaelstevenstech.com/XPrepairinstall.htm

  If the repair installation does not work, test the equipment to ensure that none have been damaged during the blackout and then do a clean install of Windows.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  If all goes well, no equipment was damaged during the shutdown. Consider buying a power supply (battery backup). APC and Belkin are good; for a computer, simply spend about $60. MS - MVP - Elephant Boy computers - don't panic!

• Help..! I got the blue screen and other issues, do not know what to do...

  Signature of the problem:
  Problem event name: BlueScreen
  Please help me, I got the blue screen and this message today while I was trying to solve a problem with the backup of my pc...
  Don't know what to put here, if you need more make me know... Thank you

  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 8086
  BCP1: 00000000
  BCP2: 00000000
  BCP3: 00000000
  BCP4: 00000000
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini030513-01.dmp
  C:\Users\Andy\AppData\Local\Temp\WER-59483-0.SysData.XML
  C:\Users\Andy\AppData\Local\Temp\WERF871.tmp.version.txt

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Hello

  Thanks for posting the question in the Microsoft Community!

  To help you better, we need more information.

  What is brand and model computer?

  To work with the issue, I suggest you check out the site:

  How to fix a blue screen stop errors that cause Windows Vista to shut down or restart unexpectedly

  http://support.Microsoft.com/kb/958233

  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

  Note: When you format a disk, all data that it would disappear.

  It would be useful for us to identify the problem, if you could upload the dump file.

  You can use the Sky-drive to download the dump file. See the link for the steps on how to download Sky-Drive.

  Download pictures and files:

  http://Windows.Microsoft.com/en-in/SkyDrive/add-photos-files-FAQ

  The location of the dump file is C:\Windows\Minidump\.

  If the problem persists, or in the future if you face problems of Windows let us know and we would be happy to help you.