I had a change in router and now I can not connect wireless network printer

HP Deskjet 3050 has

Windows 7

I got a router change and now can not conect my printer on the wireless network. What should I do?

Advertisement

Hi MaggieS, this support document provides suggestions for the correction of a reliable wireless connection. Try to work through them in the order of presentation and do not hesitate to post back if you are still not able to get connected http://support.hp.com/us-en/document/c02817031

All the best.

Tags: HP Printers

Similar Questions

  • I have been connected to the internet (wireless), then I unplugged the router and now I can not connect to internet. I tried diagnose the problem, but he said that he could not.

    I have a wireless internet connection for my laptop. I was connected to the internet, and it worked very well, so I had to unplug my router and all of a sudden I can't connect to the internet more. When I open the available networks, I hit connect on mine and he said: it does not work then I hit "diagnose the problem" and then, he says he can't. Also it is not even give me the option to set my password to connect to my network, but it does when I try to connect to any other.

    I suggest to unplug all your network cables and unplug the adapter from your modem AND router. ONLY plug your modem back power adapter in. Wait until you get a steady green light on your router, which indicates that it is ready. Then, connect the ethernet cable from your modem to your router INTERNET port. Connect the ethernet cable from your computer to any other ETHERNET port on your router. Finally turn the monitor for your router.

    If you do not do so in this order, the router can not connect properly to the internet because it doesn't have the correct IP address of your modem.

  • After Encrypting files, I had to reinstall my windows and now I can not decrypt the file

    * O.T. > encrypted files

    So after encryption of files I had to reinstall my windows (changed the name of the owner) and now I can not decrypt the file

    After attempting to decrypt the files, I'm promped with this message:

    Attribute application error

    An error occurred applying attributes to the file:

    driveletter\filename

    Access is denied. \

    I want to say that I added my administrator name in the Security tab, and then gave me full control over the files, but that did not work.

    Hello

    I understand that you cannot decrypt files previously encrypted in Windows 7 after you have reinstalled Windows.

    • What program did you use to encrypt the files?

    From now on, I would ask you to refer to similar questions discussed in the thread below links and check the status.

    Cannot decrypt previously encrypted files

    I'm unable to decrypt files encrypted after reformatting the hard drive.

    Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  • my password on my windows xp was chanded and now I can not connect

    Two days ago, someone changed my administrator password and I can not connect. When I connect as a guest, whenever I try to download it says "program not found". I can't use my MagucJack or any other thing except by email

    Hello

    This is information from Microsoft for when you forgot your XP password.

    "How to connect to your Windows XP-based computer if you forget your password or if your password expires"

    http://support.Microsoft.com/kb/321305

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    Other information above, we can not help you more with this.

    Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

    Here's information from Microsoft, explaining that the policy:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

    See you soon.

  • I reinstalled Windows XP & he said that if I continue, I'm not able to connect to Windows. I hit continue, and now I can not connect.

    I reinstall windows xp & he said that if I continue, I'm not able to connect to windows. I accidentally hit continue and now I can't log on. Help, please. What should I do now? Lynn B.

    original title: Reinstalling windows xp

    Hi Lynn B,.

    ·         What is the exact error message?

    ·         What type of installation you perform? Is this an upgrade or fresh on-site installation?

    ·         What service pack is installed on your computer?

    ·         You have the Windows installation disc?

    You can consult the following Microsoft articles:

    Install, reinstall, or uninstall Windows

    http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

     

    How to perform an upgrade on the spot (reinstallation) of Windows XP

    http://support.Microsoft.com/kb/978788

    Hope this information helps.

  • I did a system restore and now I can not connect. Error code oxc004e002.

    I ran the restoration of the system and now unable to connect. Error code oxc004e002 AAn arrives. McAfee also keeps poping up saying that I am not protected

    Hi Rita Morgan,.

    1. on what application you can not connect?

    2. When you mention "sign in" mean, you are not able to boot to the desktop?

    3. have you updated your McAfee security software?

    Make sure that it is not expired and updated your McAfee software up-to-date.

    Follow the steps below and check, if it helps.

    Step 1:

    Start your computer in safe mode with network and check if that helps to connect.

    Step 2:

    This problem can also be caused by a malware, I you have to perform a full scan in safe mode with network in order to remove the malicious software and since then, your McAfee does not protect your machine, I would have you to run a scan using the link below.

    http://OneCare.live.com/site/en-us/default.htm

    In addition, check out the link below and check if it is related to your issue.

    http://social.answers.Microsoft.com/forums/en-us/VistaInstall/thread/b7e31d29-801B-4AFA-932e-46572344476a

    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • I have reset my etec router and now I can not past the prompt 192.168.1.1. My pc is 8 years old and very, very slow

    I tried for two days now to restore my internet connection.

    I tried for two days now to restore my internet connection.

    192.168.1.1 is probably access your router's IP address and it could be a Linksys.

    If you reset your router, we help can'r you. You will need to access the router and configuring PPPoE username and password.

    Call your service provider.

    Why in the world would you reset your router if you didn't know how to put in place a new or know what to do then? It's like taking something apart and not knowing how to wind again.

  • change my Windows LIVE ID and now I can not connect to Games For Windows LIVE

    all games that support GFWL and I tried to connect it says: the e-mail address or password entered is not valid.

    I know that my email and password, but every time I try to connect, it gives me this error

    I tried to change my ID back, but it says that I have already changed my ID and I should try again later.

    Read this post and see if it helps. I know the live id and the gamerstags can be a bit confusing for some.

    http://social.answers.Microsoft.com/forums/en-us/vistagaming/thread/c0373c29-927E-45E6-9139-2f8a31cf7614/#e32dfd3c-F22B-458A-BF12-6f738940e28d

    MOS

  • Changed HARD drive and now I can not install windows 7

    I bought a new HARD drive and interlaced old, now I am trying to install windows 7 home Premium and I get an error: "Windows Setup cannot configure Windows to run on this hardware of computers.

    See if it works...

    Download the drivers from this link below (first or second file listed - 32 or 64 bit depending on the case).

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=23060&keyword=Intel+RAPI...

    Copy the files to a flash usb without all the folders drive.

    With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

    After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

    You should now see the storage driver files listed.

    If you check the box, it only includes the compatible driver.

    Follow the prompts and I hope, will install W7.

  • Install the HR schema and now I can not connect more hollow the web interface

    Hello

    I just ran hr_main.sql success. But now can't more hollow connect web interface of Oracle applications.
    I get this error: "Unable to authenticate the session."

    What has gone wrong?

    Thanks in advance.

    There is something right more important here. I guess that you are referring to the demo tables included with the database software. Do not these things on an Oracle Applications database.
    the hr_main.sql script removes and recreates a database schema called "HR".
    But Oracle Apps itself also contains a schema called HR that has nothing to do with the demo tables.
    So, when trying to install the demo tables, you destroyed a standard scheme of applications. This is almost certainly the cause of your problem.
    I'm guessing you also a lot of invalid objects now...

    Marc

  • Administrator set the wrong password and now I can not connect.

    Original title: admin sign in help

    I have a funny feeling the person who assigned the administrator password typed in wrong because that what I thought was the password does not work and the only user on this computer is the administrator.  I can't get past the login screen. What should I do next?

    Hello

    I suggest you follow the troubleshooting steps form the article and check if it helps.

    How to connect to your Windows XP-based computer if you forget your password or if your password expires

    http://support.Microsoft.com/kb/321305

  • I had to do a restore and now I can change is no longer the size of magnafication

    I had to do a restore and now I can change is no longer the size of magnafication

    Hello

    Please go to the Microsoft Community Forums.
    From the description of the question, we understand that you want to adjust the size of the magnifying glass on the computer?
    Let me go ahead and help you with the issue.

    Please answer these questions, which will help us to help you best.

    1. do you get an error message?
    2. what exactly happens when you try to change the size of the magnification?

    3. don't you make changes to the computer before the show?

     
    I suggest to refer to the links and follow the steps in the articles:
    Turn on and adjust the Magnifier
     
    Overview of the magnifying glass
     
    T o change the size of the Magnifier window
     
    Hope that answers your query. You can write back to us for other queries/problems related to windows and we will be happy to help you further.
  • My iPhone 4S has had problems with Wi - Fi and now I can't enable Wi - Fi more. Please help me solve this problem!

    My iPhone 4S began no not detecting WiFi signals. I have fixed that by removing the SIM card, but after awhile it was not detected at all and kept scanning. I tried to type the details of a Wi - Fi connection in the other section, but it didn't work. He says 'Could not find wireless networks'... I restarted because after removal of SIM card, which fixed the problem and now I can not turn on Wi - Fi. I need a Wi - Fi connection so please help me!

    A certified technician have a look...

    But it seems to me: I have seem similar symptoms before - as the WiFi radio gave up the ghost.

    I bet if you went to "Setting"-> "Général"-> "About" you won't see any address for the WiFi radio.

    If so, the radio has launched the bucket and as far as I know, it is part of the motherboard - there is therefore no route to the resurrection really... It is live with it that way, or get a replacement phone. I'm sorry.

  • I had to reinstall my windows OS and now I can't connect to a wireless device, tells me that it cannot detect any wireless network hardware

    original title: Wireless help network device

    Help, please. I had to reinstall my windows OS and now I can't connect to my wireless device. When I try it tells me that it cannot detect any wireless network hardware. I am currently connected via my laptop air card. Please help me to find and correct the problem.

    Have you installed all of the correct drivers?

  • Had to format my laptop and now I can't turn back the Adobe Acrobat Pro XI

    Had to format my laptop and now I can't turn back the Adobe Acrobat Pro XI that he keeps giving me a message that the serial number I have providede is valid but calling it a product was not found on this computer. I again downloaded the software installtion of my account page and sitill keeps making the same problem. Do I need a new license?

    Hijeanm9453734 ,

    Seems that Acrobat XI was an upgrade from the previous version. You need choose your earlier version of Acrobat, comes its serial key to activate the upgrade Acrobat XI.

    Kind regards
    Nicos

Maybe you are looking for

  • Support for Windows 10 on Satellite R830

    Hello I checked the Toshiba´s Web site and apparently Satellite R830 is not in the list of expandable devices to win 10. It's just a matter of time until Toshiba prepares the necessary drivers, or is it a definitive policy? I found in other forums so

  • Don't play age of Empires 3 on the Satellite A200-1DN

    HelloI have a Satellite A200-1dn with 1.5 GB of ram and an intel gma 950 / 945gm express chipset family.The problem is that the age of empires 3 requires a minimum of 64 MB of video ram. Mine is 32 MB.I've heard from the dvmt (dynamic video memory te

  • CQ61-310SV BIOS upgrade of missing details

    Hello, I have a CQ61-310SV with the version of the BIOS F.07. Section of downloads on the BIOS here I can see patches for review F.15. Where can I read the changes in the versions inbetween? (F.08 - F.14) Thank you

  • Import of CSV with loop value FOR

    Good afternoon I'm new to LabView and trying to write a VI that will eventually run a set of calculations on a set of data with millions of data points. I want the VI to count the number of data imported points of the. As they are written to a CSV fi

  • How to save files on a CD system restore point?

    How to record the system restore point/data files to the remote storage device. for example, CD? Why... I need to run ID or remove malicious software programs on PC. To completely clean, I need to disable System Restore which will remove all the old


HashFlare