I had checked "extend my desktop to this monitor". I have only 1 monitor though. Now the screen is empty. I rebooted the pc in the hope to go in safe mode but the screen remained blank.__How can I go back to single screen? __

Similar Questions

• Impossible to uncheck "extend the desktop on this monitor option" when you work with multiple monitors.

  Title: Cancellation of the DESKTOP EXTENSION

  I am wanting to "uncheck" the 'extend the desktop to this monitor "... It's 'grey '.  How can I fix?

  Hi Goldie01,

  I understand that you are haivng problem with the connection of multiple monitors. I'll be happy to help you with this problem.
   
  (1) have you tried to connect the monitor directly on the CPU and check?
  (2) have you made changes on the computer before this problem?
   
  Method 1: I suggest you run the Microsoft FIXIT from the link and if it helps.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us
   
  Method 2: I also suggest you follow the steps to configure and change the display on multiple monitors of links and check if that helps.
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-display-settings-on-multiple-monitors
   
  For reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-multiple-monitor-problems
   
  Method 3: Also, I suggest you to update the graphics card drivers and check if it helps.
   
  I hope it helps. If you have problems in the future, please let us know. We will be happy to help you.

• "service pack do not have. recovery of Exchange"has been ongoing for more than 12 hours. Have turned off on the reboot, but the message remains. How can I fix?

  I installed the service pack and when the computer restarted message "service pack do not have. restoration of the changes. "came and slept there. I tried to turn off computer and start in safe mode, but nothing helped. Has been ongoing for more than 12 hours and no change. Any ideas? Thank you

  Hello

  You can try this:

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• I use iphone videos and still images in a project.  When I drag the videos in the timeline, they work fine, but when I drag still images, I have only a small part of the original photo.  No idea how to solve this problem?

  I use iphone videos and still images in a project of first Pro CC.  When I drag the videos in the timeline, they work fine, but when I drag still images, I have only a small part of the original photo.  No idea how to solve this problem?

  Right click on the photo in sequence and "ladder to the chassis '. Can also be set in the preferences and affect imports after the change

  Thank you

  Jeff

• can connect to internet in safe mode but not in normal mode

  Hi all... I use windwos 7 ultimate...
  My problem is I can connect to the internet in safe mode, but unfortunately I can't connect to internet in normal mode...

  I have try several step to address this problem, but it seems is no good at all, and for your information guys, I format my laptop 4 times.

  and I update my network driver.

  I use kapersky 7 and malwarebytes even they cannot detect virus or trojan etc which are harmful to my laptop...

  Please help me guys

  Try this:
  -Click Start
  -Type the word msconfig in the search box and press enter
  -Uncheck the box each tick on the Startup tab.
  -Click the Services tab, then check the box hides the Microsoft services.
  -Uncheck the box each remaining tick.
  -Reboot the machine.
  -If this problem, restore the ticks in groups of 8 until you find the culprit.

  ATTENTION: If you connect to the Internet without a router, then you MUST make sure that your Windows Firewall is active. If it is inactive then you will expose the machine to the pirates.

• HELO now window is in safe mode, but I want the window to work with safe mode, normally not only what to do

  window did not open so I opened it in safe mode but I want t o window open as usual

  Hello

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu () type msconfig and press enter on your keyboard - follow UAC prompt.
  4. The System Configuration utility opens
  5. Make sure the Normal startup is selected
  6. then click on the STARTUP tab at the top
  7. Make sure that the startup is disabled
  8. Apply - OK - then follow restart guests

• Something is wrong! Start in safe mode, but it turns out that for Normal mode.

  Mac Mini (late 2014)

  Processor 3 GHz Intel Core i7

  16GB 1600 MHz DDR3 memory

  Start drive Macintosh HD

  Iris 1536 MB Intel graphics card

  Monitor: DELL U2713HM, use the Apple adapter to connect to the Mac Mini

  I upgraded from Capitan in Sierra and got the problem that after I pressed the power button, the screen is full white. This problem has occurred on the Sierra, never happened in Capitan.

  I went to the Apple store today, they made a few diagnostic and found no problem. Everything is good. System is fine too. In the Apple store, they showed me to press SHIFT after I press the power button and it will start up the Mac in safe mode. They told me this can sometimes help fixing the boot issue. My Mac actually works very well in the Apple store. I tried the power and turned off twice in the store, and there is no problem. I am happy and come home.

  After I go home, I turn on my Mac, it always has the same problem before you go to the Apple store, after I pressed the power button, the screen is completely blank. So I tried to boot mode safe by pressing Shift and taking until I saw the Apple logo on the screen.

  After I log in, I checked my Mac mode, this is actually Normal mode!

  If I intended to power to the top of my Mac in safe mode but it turns out to be normal.

  If I do not press SHIFT and hold it pressed down after I turn on the power, I'll have just a white screen!

  It works very well in Apple store, but not in my own House.

  Anyone know what is happening?

  What is different between your system and the store? Have you taken your own keyboard & they were they that? If you use a bluetooth keyboard try using a wired USB one instead. Is this an original Apple keyboard?

  Do you have other devices connected? If you delete them.

  Please see the article below from Apple, it has information about starting in safe mode without keyboard (by setting a NVRAM variable). If you enter a work boot, you can put the mini in safe mode from there, via the command appears on this page...

  Try safe mode if your Mac does not end commissioning - Apple Support

  I would like to start trying to make another bootable OS disc - either an installation disc or a complete operating system to see if the Mac can be started OK to a different installation of OS - which indicates if the operating system or disk are part of your question, or if the material is simply unable to work correctly at all.

• Computer woks fine in safe mode, but completely stops in normal mode after 15 seconds

  SP2 of Windows 7

  My computer works fine in Safe Mode but when I go to Normal mode the windows on the screen comes up but after about 15 seconds the computer will completely completely OFF as if I turned it off. Any help would be appreciated...

  This looks like a temperature problem.  Go to http://www.download.com and download Speedfan.  It will show you the internal time.  If they are all under 50 degrees C, you're OK, if they are over 65, that's your problem, between watching the bears.

  Another possibility is a virus or corrupted system files.  Get your updated antivirus program, and then run a full system scan.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  -

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  -

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  -

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.

  -

  I hope this helps. Good luck.

• MacBook pro works well in safe mode but freezes in normal mode

  Now I'm in safe mode, but if I restart in normal mode. It freezes.

  I have chosen of all the startup items.

  I ran the diagnostic test suggested by Linc Davis report.

  Start time: 10:29:16 04/30/16

  Model identifier: MacBookPro11, 1

  The system version: OS X 10.11.4 (15E65)

  Kernel version: Darwin 15.4.0

  Start mode: security

  Integrity of system protection: enabled

  Since the starting time: 10 minutes

  FileVault: on

  Diagnostic reports

  2016-04-06 CudaDriveInstall crash

  2016-04-06 GoogleTalkPlugin crash

  2016-04-06 IMDPersistenceAgent crash x 2

  2016-04-06 ReportCrash crash

  2016-04-06 cloudd crash

  2016 04-06 com.apple.CommerceKit.TransactionService crash

  2016-04-06 recentsd x 5 accident

  2016 04-06 suggestd accident x 5

  Crash of Microsoft Error Reporting 2016-04-12

  2016 04-27 com.apple.WebKit.WebContent crash

  Journal

  30 Apr 09:13:45 init: error getting of PHY_MODE;  using MODE_UNKNOWN

  30 Apr 09:13:46 en0: antenna diversity (index = - 1) Configuration error.

  30 Apr 09:13:46 en0: configuration of error transmission antenna (index = - 1).

  30 Apr 09:48:26 launchd process [1]-l' system of limitation of disabling i/o level

  30 Apr 09:48:26 launchd process [1] disable the CPU - the system-wide limit

  30 Apr 09:53:06 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-83.40.3/AppleCredentialManager/AppleCredentialManager.cpp, line: 785

  30 Apr 09:53:12 IO80211ControllerMonitor::configureSubscriptions() cannot add the _controller subscriptionIO80211Controller::start is 0x30684b4c8b15bb07, the provider is 0x30684b4bcb530207

  30 Apr 09:53:12 init: error getting of PHY_MODE;  using MODE_UNKNOWN

  30 Apr 09:53:13 en0: antenna diversity (index = - 1) Configuration error.

  30 Apr 09:53:13 en0: configuration of error transmission antenna (index = - 1).

  30 AVR 10:16: 15 launchd process [1]-l' system of limitation of disabling i/o level

  30 AVR 10:16: 15 launchd process [1] disable the CPU - the system-wide limit

  30 AVR 10:17: 41 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-83.40.3/AppleCredentialManager/AppleCredentialManager.cpp, line: 785

  30 AVR 10:17: 47 IO80211ControllerMonitor::configureSubscriptions() cannot add the _controller subscriptionIO80211Controller::start is 0xaba80277a3767cd9, the provider is 0xaba80276e3f4a6d9

  30 AVR 10:17: 47 init: error getting of PHY_MODE;  using MODE_UNKNOWN

  30 AVR 10:17: 47 en0: antenna diversity (index = - 1) Configuration error.

  30 AVR 10:17: 47 en0: configuration of error transmission antenna (index = - 1).

  30 AVR 10:17: 51 SIOCPROTODETACH_IN6: error utun0 = 6

  30 AVR 10:19: 59 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-83.40.3/AppleCredentialManager/AppleCredentialManager.cpp, line: 785

  30 AVR 10:19: 59 jnl: b (1, 4): replay_journal: from: 16072192 to: 3949056 (joffset 0 x 19502000)

  30 AVR 10:19: 59 jnl: b (1, 4): rereading of newspaper.

  30 AVR 10:20: 05 IO80211ControllerMonitor::configureSubscriptions() cannot add the _controller subscriptionIO80211Controller::start is 0x79b5767eccf49abf, the provider is 0x79b5767e0d328ebf

  30 AVR 10:20: 05 init: error getting of PHY_MODE;  using MODE_UNKNOWN

  30 AVR 10:20: 05 en0: antenna diversity (index = - 1) Configuration error.

  30 AVR 10:20: 05 en0: configuration of error transmission antenna (index = - 1).

  Demons

  com Apple.Installer.osmessagetracing

  launchd

  / System/Library/LaunchDaemons/com. Apple.Installer.osmessagetracing.plist

  -com.apple.installer.osmessagetracing

  / Library/LaunchAgents/com. Cisco.AnyConnect.gui.plist

  -com.cisco.anyconnect.gui

  / Library/LaunchAgents/com. Dell.Scan.Dell2155ColorMFP.ButtonListenerAgent.plist

  -com.dell.scan.Dell2155ColorMFP.ButtonListenerAgent

  /Library/LaunchAgents/com.Google.keystone.agent.plist

  -com.google.keystone.system.agent

  /Library/LaunchAgents/com.TeamViewer.TeamViewer.plist

  -com.teamviewer.teamviewer

  /Library/LaunchAgents/com.TeamViewer.teamviewer_desktop.plist

  -com.teamviewer.desktop

  /Library/LaunchDaemons/com.Adobe.fpsaud.plist

  -com.adobe.fpsaud

  / Library/LaunchDaemons/com. Apple.Installer.osmessagetracing.plist

  -com.apple.installer.osmessagetracing

  / Library/LaunchDaemons/com. Cisco.AnyConnect.vpnagentd.plist

  -com.cisco.anyconnect.vpnagentd

  /Library/LaunchDaemons/com.cudadrive.cudadrivesvcd.plist

  -com.cudadrive.cudadrivesvcd

  /Library/LaunchDaemons/com.Google.keystone.daemon.plist

  -com.google.keystone.daemon

  / Library/LaunchDaemons/com. Microsoft.Office.Licensing.Helper.plist

  -com.microsoft.office.licensing.helper

  /Library/LaunchDaemons/com.TeamViewer.helper.plist

  -com.teamviewer.Helper

  /Library/LaunchDaemons/com.TeamViewer.TeamViewer_Service.plist

  -com.teamviewer.service

  Library/LaunchAgents/com.citrixonline.GoToMeeting.G2MUpdate.plist

  -com.citrixonline.GoToMeeting.G2MUpdate

  Beams

  /System/Library/Extensions/JMicronATA.kext

  -com.jmicron.JMicronATA

  / / Library/Internet Plug-Ins/Flash Player.plugin

  S/O

  / Library/Internet Plug-Ins/googletalkbrowserplugin.plugin

  -com.google.googletalkbrowserplugin

  / Library/Internet Plug-Ins/o1dbrowserplugin.plugin

  -com.google.o1dbrowserplugin

  / / Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin

  -com.microsoft.sharepoint.browserplugin

  / / Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin

  -com.microsoft.sharepoint.webkitplugin

  / / Library/Internet Plug-Ins/Silverlight.plugin

  -com.microsoft.SilverlightPlugin

  / Library/PreferencePanes/Dell 2155 Color MFP.prefPane

  -com.dell.scan.Dell2155ColorMFP.prefPanel

  / Library/PreferencePanes/Flash Player.prefPane

  -com.adobe.flashplayerpreferences

  /Library/security/SecurityAgentPlugins/TeamViewerAuthPlugin.bundle

  -com.teamviewer.AuthorizationPlugin

  / Library/Widgets/Status Monitor.wdgt

  -com.dell.print.statusmonitor.widget

  Library/Address Book Plug-Ins/SkypeABDialer.bundle

  -com.skype.skypeabdialer

  Library/Address Book Plug-Ins/SkypeABSMS.bundle

  -com.skype.skypeabsms

  / Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin

  -com.citrixonline.mac.WebDeploymentPlugin

  Content of/etc/hosts

  127.0.0.1 localhost

  255.255.255.255 broadcasthost

  : 1 localhost

  Content of /etc/pf.conf

  scrub-anchor "com.apple / * '.

  NAT-anchor "com.apple / * '.

  RDR-anchor "com.apple / * '.

  dummynet-anchor "com.apple / * '.

  Anchor "com.apple / * '.

  load the "com.apple" anchor of "/ etc/pf.anchors/com.apple".

  Content of/etc/syslog.conf

  install.* @127.0.0.1:32376

  Content of /etc/pam.d/authorization

  Pam_krb5.so AUTH optional use_kcminit use_first_pass

  AUTH pam_ntlm.so optional use_first_pass

  AUTH required pam_opendirectory.so use_first_pass nullok

  account required pam_opendirectory.so

  Content of /etc/pam.d/checkpw

  AUTH required pam_opendirectory.so use_first_pass nullok

  account required pam_opendirectory.so no_check_home no_check_shell

  Content of /etc/pam.d/chkpasswd

  AUTH required pam_opendirectory.so

  account required pam_opendirectory.so

  password required pam_permit.so

  session required pam_permit.so

  Content of /etc/pam.d/cups

  AUTH required pam_opendirectory.so

  account required pam_permit.so

  password required pam_deny.so

  session required pam_permit.so

  Content of /etc/pam.d/ftpd

  AUTH required pam_opendirectory.so

  account required pam_permit.so

  password required pam_deny.so

  session required pam_permit.so

  Contents of /etc/pam.d/login

  Pam_krb5.so AUTH optional use_kcminit

  AUTH pam_ntlm.so optional try_first_pass

  AUTH pam_mount.so optional try_first_pass

  AUTH required pam_opendirectory.so try_first_pass

  account required pam_nologin.so

  account required pam_opendirectory.so

  pam_opendirectory.so password required

  session required pam_launchd.so

  session required pam_uwtmp.so

  session pam_mount.so in option

  Content of /etc/pam.d/login.term

  account required pam_nologin.so

  account required pam_opendirectory.so

  session required pam_uwtmp.so

  Content of /etc/pam.d/other

  AUTH required pam_deny.so

  pam_deny.so account required

  password required pam_deny.so

  session required pam_deny.so

  Content of /etc/pam.d/passwd

  AUTH required pam_permit.so

  account required pam_opendirectory.so

  pam_opendirectory.so password required

  session required pam_permit.so

  Content of /etc/pam.d/rshd

  AUTH required pam_permit.so

  account required pam_nologin.so

  account required pam_opendirectory.so

  session required pam_launchd.so

  Content of /etc/pam.d/screensaver

  Pam_krb5.so AUTH optional use_kcminit use_first_pass

  AUTH required pam_opendirectory.so use_first_pass nullok

  account required pam_opendirectory.so

  account sufficient pam_self.so

  Group accounts required pam_group.so no_warn = admin, wheel fail_safe

  account required pam_group.so no_warn deny group = admin, wheel ruser fail_safe

  Content of /etc/pam.d/smbd

  account of the sacl_service pam_sacl.so = allow_trustacct smb

  session required pam_permit.so

  Content of /etc/pam.d/sshd

  Pam_krb5.so AUTH optional use_kcminit

  AUTH pam_ntlm.so optional try_first_pass

  AUTH pam_mount.so optional try_first_pass

  AUTH required pam_opendirectory.so try_first_pass

  account required pam_nologin.so

  account of the sacl_service pam_sacl.so = ssh

  account required pam_opendirectory.so

  pam_opendirectory.so password required

  session required pam_launchd.so

  session pam_mount.so in option

  Content of /etc/pam.d/su

  AUTH sufficient pam_rootok.so

  AUTH required pam_opendirectory.so

  Group accounts required pam_group.so no_warn = admin, wheel tweak root_only fail_safe

  no_check_shell account required pam_opendirectory.so

  pam_opendirectory.so password required

  session required pam_launchd.so

  Content of /etc/pam.d/sudo

  AUTH required pam_opendirectory.so

  account required pam_permit.so

  password required pam_deny.so

  session required pam_permit.so

  Content of /etc/periodic/daily/110.clean-tmps

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_clean_tmps_enable' in

  [AA] [Ee] [Ss])

  If [-z "$daily_clean_tmps_days"]

  then

  echo ' $daily_clean_tmps_enable is defined, but '.

  "$daily_clean_tmps_days is not.

  RC = 2

  on the other

  ECHO «»

  echo "deleting old temporary files:

  Set f noglob

  args = ""-atime $daily_clean_tmps_days - mtime + $daily_clean_tmps_days ""

  args = "${args} - ctime + $daily_clean_tmps_days.

  dargs = "- empty - mtime + $daily_clean_tmps_days"

  dargs = "${dargs}! "- name .vfs_rsrc_streams_."

  [n "$daily_clean_tmps_ignore"] & & {}

  args = "$args '" echo "${daily_clean_tmps_ignore %} ' |" ' "

  sed / [] [] * / ! -name/g "

  dargs = "$dargs '" echo "${daily_clean_tmps_ignore %} ' |" ' "

  sed / [] [] * / ! -name/g "

  .. .and 21 more line (s)

  Content of /etc/periodic/daily/130.clean-msgs

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_clean_msgs_enable' in

  [AA] [Ee] [Ss])

  If [! d/var/msgs]

  then

  echo ' $daily_clean_msgs_enable has the value but msgs/var / ' \.

  "does not exist".

  RC = 2

  on the other

  ECHO «»

  echo "cleaning of the old ads system:

  [n '$daily_clean_msgs_days'] & &

  ARG =-${daily_clean_msgs_days #-} | ARG =

  GSM-c $arg & & rc = 0 | RC = 3

  FI;

  *) rc = 0;

  ESAC

  output $rc

  Content of /etc/periodic/daily/140.clean-rwho

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_clean_rwho_enable' in

  [AA] [Ee] [Ss])

  If [-z "$daily_clean_rwho_days"]

  then

  echo ' $daily_clean_rwho_enable is activated but '.

  "$daily_clean_rwho_days is not defined.

  RC = 2

  Elif [! d/var/rwho(1)]

  then

  echo "$daily_clean_rwho_enable is enabled but/var/rwho(1)."------

  "does not exist".

  RC = 2

  on the other

  ECHO «»

  echo "deleting obsolete files in/var/rwho(1):

  case '$daily_clean_rwho_verbose' in

  [AA] [Ee] [Ss])

  print = -.

  *)

  print =;

  .. .and 14 more line (s)

  Content of /etc/periodic/daily/199.clean-fax

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  If [/ var/spool/fax - d]; then

  ECHO «»

  echo "deleting files fax scratch."

  CD/var/spool/fax & & \

  To find. -type f-name ' [0-9] *. [0-9] [0-9] [0-9] "- mtime + 7 - delete > / dev/null 2 > & 1;"

  FI

  Content of /etc/periodic/daily/310.accounting

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_accounting_enable' in

  [AA] [Ee] [Ss])

  If [!] ACCT - f]

  then

  echo '$daily_accounting_enable has the value but ACCT '.

  "does not exist".

  RC = 2

  Elif [-z "$daily_accounting_save"]

  then

  echo ' $daily_accounting_enable is defined, but '.

  "$daily_accounting_save is not.

  RC = 2

  on the other

  ECHO «»

  echo "accounting log rotation and collection of statistics:

  CD/var/account

  RC = 0

  n = $daily_accounting_save

  RM f ACCT. $ ACCT n.gz. $n || RC = 3

  m = $n

  .. .and 18 several line (s)

  Content of /etc/periodic/daily/400.status-disks

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_status_disks_enable' in

  [AA] [Ee] [Ss])

  ECHO «»

  echo "record status:

  DF $daily_status_disks_df_flags & & rc = 1 | RC = 3

  ;;

  *) rc = 0;

  ESAC

  output $rc

  Content of /etc/periodic/daily/420.status-network

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_status_network_enable' in

  [AA] [Ee] [Ss])

  ECHO «»

  echo "State of the network interface:

  case '$daily_status_network_usedns' in

  [AA] [Ee] [Ss])

  netstat-i & & rc = 0 | RC = 3;

  *)

  netstat - in & & rc = 0 | RC = 3;

  ESAC;

  *) rc = 0;

  ESAC

  output $rc

  Content of /etc/periodic/daily/430.status-rwho

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_status_rwho_enable' in

  [AA] [Ee] [Ss])

  RWHO(1) = $(echo/var/rwho / *)

  If [f ' ${rwho(1) % *} "]

  then

  ECHO «»

  echo "the system of Local network status:

  PROG = ruptime

  on the other

  ECHO «»

  echo "Local System State:

  PROG = running time

  FI

  RC = $($prog | tee/dev/stderr | wc-l)

  If [$?-eq 0]

  then

  [$rc - gt 1] & & rc = 1

  on the other

  RC = 3

  FI;

  .. .and 3 more lines

  Content of /etc/periodic/daily/999.local

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  RC = 0

  script in $daily_local

  do

  echo "

  case '$script' in

  /*)

  If [f "$script"]

  then

  echo "Running $script:

  sh $script | RC = 3

  on the other

  echo "$script: no file.

  [$rc - lt 2] & & CR = 2

  FI;

  *)

  echo "$script: not an absolute path.

  [$rc - lt 2] & & CR = 2;

  ESAC

  fact

  output $rc

  Content of /etc/periodic/monthly/199.rotate-fax

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  ECHO «»

  printf %s "rotation of the fax log files:

  CD/var/log/fax

  I'm in * .log; do

  If [f ' ${i} "]; then

  echo-n "$i".

  If [x - / usr/bin/gzip]; then gzext = ".gz". else gzext =""; FI

  If [f ' ${i} $.3 {gzext} "]; then mv-f "${i} $.3 {gzext}" "${i}.4$ {gzext}"; FI

  If [f ' ${i} $.2 {gzext} "]; then mv-f "${i} $.2 {gzext}" "${i} $.3 {gzext}"; FI

  If [f ' ${i}.1$ {gzext} "]; then mv-f "${i}.1$ {gzext}" "${i} $.2 {gzext}"; FI

  If [f ' ${i}.0$ {gzext} "]; then mv-f "${i}.0$ {gzext}" "${i}.1$ {gzext}"; FI

  If [f ' ${i} "]; then mv-f "${i}" "${i}.0" & & if [x - / usr/bin/gzip]; then gzip-9 "${i}.0. DIY FI

  Touch "${i}" & & chmod 640 ' ${i} "& & chown root: admin" ${i} ".

  FI

  fact

  ECHO «»

  Content of /etc/periodic/monthly/200.accounting

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  oldmask = $(umask)

  umask 066

  case '$monthly_accounting_enable' in

  [AA] [Ee] [Ss])

  W = / var/log/wtmp

  RC = 0

  Remove = NO

  If [$rc - eq 0]

  then

  ECHO «»

  echo "doing the accounting of connection:

  RC = $(ac-p |) Sort - nr k 2 | Tee/dev/stderr. WC - l)

  [$rc - gt 0] & & rc = 1

  FI

  [$remove = YES] & & rm-f $W.0;

  *) rc = 0;

  ESAC

  umask $oldmask

  output $rc

  Content of /etc/periodic/monthly/999.local

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  RC = 0

  script in $monthly_local

  do

  echo "

  case '$script' in

  /*)

  If [f "$script"]

  then

  echo "Running $script:

  sh $script | RC = 3

  on the other

  echo "$script: no file.

  [$rc - lt 2] & & CR = 2

  FI;

  *)

  echo "$script: not an absolute path.

  [$rc - lt 2] & & CR = 2;

  ESAC

  fact

  output $rc

  Content of /etc/periodic/weekly/320.whatis

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$weekly_whatis_enable' in

  [AA] [Ee] [Ss])

  ECHO «»

  echo "reconstruction whatis database:

  MANPATH ='/ usr/bin/manpath - q'

  If [$? = 0]

  then

  If [-z "${MANPATH}"]

  then

  echo "manpath impossible to find directories manpage.

  RC = 3

  on the other

  RC = 0

  /usr/libexec/makewhatis.local "${MANPATH}" | RC = 3

  If [X "${man_locales}"! = X]

  then

  I'm in ${man_locales}

  do

  LC_ALL = $i /usr/libexec/makewhatis.local - a------.

  -L "${MANPATH}" | RC = 3

  .. .and 9 more line (s)

  Content of /etc/periodic/weekly/999.local

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  RC = 0

  script in $weekly_local

  do

  echo "

  case '$script' in

  /*)

  If [f "$script"]

  then

  echo "Running $script:

  sh $script | RC = 3

  on the other

  echo "$script: no file.

  [$rc - lt 2] & & CR = 2

  FI;

  *)

  echo "$script: not an absolute path.

  [$rc - lt 2] & & CR = 2;

  ESAC

  fact

  output $rc

  Contents of the /Library/Preferences/com.apple.security.appsandbox.plist (text of XML document)

  <? XML version = "1.0" encoding = "UTF-8"? >

  <! DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0 / / IN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > ""

  < plist version = "1.0" >

  < dict >

  < key > UnrestrictSpotlightContainerScope < / key >

  < true / >

  < / dict >

  < / plist >

  Contents of the /Library/Preferences/SystemConfiguration/com.apple.Boot.plist (text of XML document)

  <? XML version = "1.0" encoding = "UTF-8"? >

  <! DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0 / / IN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > ""

  < plist version = "1.0" >

  < dict >

  Flags kernel < key > < / key >

  < string > < / string >

  < / dict >

  < / plist >

  Featured: indexing and search disabled

  Firewall: on

  Small files: 43

  Time elapsed (s): 272

  If it works in Mode safe, look in system preferences > users and groups > login items and delete items from opening of any third party. Also look in Library/StartupItems. Nothing is put in this folder by default, so something in here belongs to you. Then log out and back in or restart and test.

• USB works in XP safe mode but not in "normal" mode.

  Hello

  Something has trashed my usb connection because none of them work.  They worked a few days ago, but not now.  The USB ports work fine in XP safe mode, but I can't make them work under XP 'normal '.

  I tried system restore to restore to when I know they worked (Saturday).  But the restoration said it cannot restore at this time there.  I drive four other date back (Thu, Fri, Thur, sea) and it woul don't restore of any of them.

  I went to the HP web page for this computer.  They have no USB drivers, so I download the chipset and installed driver.  It does not work.

  I tried to uninstall USB devices by using Device Manager.  Devide manager uninstalled, then I rebooted the machine and it reloaded automatically usb drivers.  But I can not use devices.

  I tried Device Manager-> select your hardware-> right click-> properties-> tab driver-> update driver-> online search for the driver.

  I tried to uninstall in safe mode, run usb.inf and then re-startup - which did not work.

  I am current internet search for USB drivers for this computer.  But I still found nothing.

  Anyone know where I can find USB drivers for the HP Pavilion a1515n or should I be looking for on google.  Currently, I'm looking Drivers USB a1514n.

  I would like to reinstall the USB drives, but I can't find them.  Or some otherway to get USB devices working again.

  Thanks for any help.

  Dennis

  All,

  I got it to work!

  I have not updated the driver for the USB hub.   However, I finally tried to update the driver for the USB EHCI controller.  Once I updated the driver for it, all the USB ports and the connected devices are recognized.

  Life is good again.   It took me 5 hours to understand that I had to update a different device driver, but hey - at least it works!

  Denni

• Windows XP Installer does not not for updates or MS Office 2010. Error says Safe Mode, but I'm not in it.

  Windows XP Installer doesn't work is not for the automatic updates or MS Office 2010. Error says Safe Mode, but my machine is not in Mode without failure.

  When I try to run MS Office 2010, it starts a dialog box "preparing to install...." "even if I had used it for a few years. In the end, it fails and tells me whether I'm in Mode safe or I need to reinstall Windows Installer, I have done several times.

  I can automatically download updates and they seem to be installed, but all fail at the end.

  Any ideas on how to address this problem? Yes, I know that it is probably recommended to buy a new PC, but I need this machine operate fully for the next months. Then by reloading the operating system does not, either. He told me that my XP disc is the wrong version.

  Thanks in advance for any ideas.

  Hello

  1. What is the exact error message that you receive?
  2 have you made changes on the computer before this problem?
  3. all of the updates fail to install?
  Method 1: Make sure that the Windows Installer service is not set to disabled.

  (a) click Start, click run and type services.msc and press Enter to open Services.
  (b) click the Windows Installer service, and then click Properties.
  (c) if the startup type box is set to Disabled, change it to Manual.
  (d) click on OK to close the Properties window.
  (e) right click on the Windows Installer service and then click Start. The service should start without errors.
  (f) click on the file menu, and then click exit.

  Method 2: Error message "Could access the Windows Installer Service" when you install a program in Windows XP
  http://support.Microsoft.com/kb/315353
  Note: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756
  Also note: Please, do not KB315341 (how to perform an upgrade on the spot (reinstallation) of Windows XP)
  Method 3: You can also download the latest version of Windows Installer from the link below:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
   
  Reference: troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation issues
  http://support.Microsoft.com/kb/906602
   
   
  
   
   

• Cannot activate windows in safe mode, but blue schreens windows in Normal mode

  I'm trying to reinstall Windows XP Home Edition on my Dell Inspiron 600 m laptop.  When he has finished with reinstall it it a blue screen when you try to start in windows Normal mode.  I found on the web that this problem has to do with hardware drivers and is resolved by installing service pack 1.  I can't install service pack 1 because when I start in safe mode and you click a user or administrator, it says this product must be enabled (which can be done in safe mode).  I'm stuck

  How can I me is service pack 1 installed or this computer enabled if I can't start Normal or go beyond the notice of activation in safe mode?

  Ok.  Here's what I had to do:

  If you boot into safe mode (without network).  This would let me into safe mode without requiring activation immediately.  From there, I loaded service Pack2 of CD that allowed me to do the normal startup after that.

  With network option was the hang up for me.  It would allow me to work in safe mode without immediately activating the software.

  So I went to THIS problem.

  Rami thank you for your help.

• Why LR says I have only 19 days out of the trial version.

  Why LR says I have only 19 days out of the trial version, I work for a University that has licenses of 50 CC company and I have one of them, which should not be warning me how many days let him, as it should be a full licensed version.

  Please refer to:

  Creative Cloud applications unexpectedly back in the test mode. CCM, CS6

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Concerning

  Stéphane

• Wake up Apple TV but the TV remains blank

  Hey guys, when I wake up my apple TV, the light turns on, but my TV remains empty. The only way I can solve this is if I unplug the power cord and plug it in again. Anyone else having the same questions or know a fix? Thank you...

  Hi Vernet

  Is this a recurring problem or just happened recently?

  What brand is your TV?

• I run my pc on safe mode but I can't change the screen reselution so that everything fits in and when I'm on fb I ts large and I can't read the writing can help you

  I have windows vista Home premium, I'll have to start safe mode because I was getting the r300 driver error all the time and I need to get writing and screen resolution changed so I can see it when I go to fb, I can hardly read the writing when I do the smaller screen, I can't play games like they wont take in can help you please

  Hello

  You can not change the resolution of the screen and follow other information support technician gave you while you are using safe mode.

  You must be in Normal mode to do so.

  See you soon.