I had to replace my hard drive on my pavilion dv6 - 2170ee. I cannot now start with disk
I had to replace my drive hard C after only 14 months, my problem is now that I need a startup disk to start the new drive hard C, without that it is impossible to recover my system, I have a full backup of my files before replacing the C disk hard can you please help.
Concerning
Andrew
You can order the link below recovery disks
http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00810334
Tags: Notebooks
Similar Questions
-
Replacing the hard drive on my Pavilion dv6 - 3150ee but the bios is not recognize it.
Hello
I have a HP Pavilion dv6-3150ee. my original hard drive was broken. I bought a western digital 500 GB 5400 Sata 2.
I installed the hard drive and made the recovery. Everything went well past and ok. When completed recovery operation, the system has restarted to continue the installation of hard drives but I got this message: no boot device insert boot disk and press any key.
so I went to the bios and tested the memory and the hard drive and all was ok. I tried to get into my bios, advanced options, but it isn't everything. My bios version is F.12.
I don't know what the problem is, and I will be thanksful for any help.
N.B: I have my recovery discs and my windows repair disc.
Thank you.
The new hard drive sometimes requires to prepare first with utility cd from Cyberlink. Download and save the file. Once the download is complete, place a blank cd in your drive and click on the file to create a boot cd. Start with this cd and wait until you get a green check mark indicates the hard disk is ready. Remove the cd, insert the first disc of recovery and restart the laptop.
http://ftp.HP.com/pub/softlib/software11/COL32372/PV-80183-1/sp44645.exe
-
Pavillion G7: I had to replace the hard drive on my HP
I had to replace the hard drive on my HP Pavilion G7. I have an old windows 7 Pro for refurbished PC's drive, but I can't do anything. the screen say that she needs an operating system. the product number is D1D28UA #ABA. Can offer you any advice?
Cannot use the disc of Windows 7 Pro from the old PC to install on a laptop HP Pavilion G7, as the models are different. If the OS disc will not contain the correct drivers and applications for the HP Pavilion G7. In this case, you will need to order the CD of restoration pro Windows 7 for this laptop HP Pavilion G7.
* Click on the star of CONGRATULATIONS on the left to say thank you *.
Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.
Thank you
AntonyG1
Although I am an employee of HP, I speak for myself and not for HP -
I had to replace my hard drive and I only have a disk of windows XP Prof. Update My installation aborts because she wants is a full version. What should I do
You will need to borrow an installation disc to a former operating system Microsoft - Windows 95, 98 or me. There is no way around it. If person don't you know is an older drive, you can borrow for a few minutes, you will need, you will need to either buy a copy full XP or take the unit to a local computer professional to do the XP installation for you. MS - MVP - Elephant Boy computers - don't panic!
-
Had to replace my hard drive, computer blocked in 2006
I recently had to replace the hard drive of my laptop. It's a HP Envy 14 Beats Edition Audio t-1200. I confess that I'm not too knowledgeable about computers, so I don't really know how it works, but here's the gist:
With the new hard drive, I noticed that several drivers are several years old, and I can't update. For example, the mouse driver is dated 2006, so I can't do the scroll with 2 fingers, and I was able to with the original hard drive. In addition, I have most any bluetooth application, but I know that my phone is bluetooth capable, because I've used it before. Audio also works differently. Whenever I try to update a driver, he says that everything is up to date. Is it possible that I can get my laptop to be as it was when I bought it? Basically, right now, it's like a computer that would have produced 8 years ago.
I know that these problems are not a huge deal, but I would like to have the computer I originally paid. Help, please!
Ethan
All I can think is to make sure that you have turned on Bluetooth switch.
I see others with other computers of brand having this problem and can't find a solution yet.
I found this Microsoft, but I don't know if the adapter must be seen first or not for the fix to work.
-
I had to replace my hard drive and now my key does not work
I had to replace my hard drive and now my key does not work, it keeps giving the error 0xC004E003
Have you tried to restart by phone?
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-usActivation error: 0XC004E003 http://support.microsoft.com/kb/938450
Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
http://go.Microsoft.com/fwlink/?LinkId=52012 -
On my G62-340US, I just had to replace the hard drive. I did 4 recovery disks when it was new. Now restore the recovery discs 3 ran, but will not be the 4th disk. The 4th information located anywhere without having to buy a new set? Where can I buy a single disc?
Hello:
As far as I know, you would have to buy a whole series of new.
But, if you can read all 25 characters of the product key of W7 on the bottom of your laptop, I have a free solution to install a simplified version of W7 using the code the product key on your laptop.
Here's how...
Download the ISO file from W7 Home Premium 64 bit from the Microsoft link below.
http://MSFT.digitalrivercontent.NET/win/X17-58997.ISO 2147483647 English Windows 7 Home Premium x 64 X 17 - 58997.iso
Make sure that you got the file from xx GB 3. integers download, in rare circumstances, you get a full notification of download, but you do not receive the entire file to download.
After you download the ISO file, you can burn it to a DVD using the ISO file burn option on your DVD burning program, or you can use this tool to transfer the ISO to a flash USB DVD or 4 GB drive.
The tool also performs the bootable media.
http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool
Then go to the care of your laptop and driver page for available software and drivers that you need.
http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&DLC=en&docName=c02497777&LC=en&product=4308554
-
Error that says 'install' is corrupted and cannot be opened. You must eject the disk image
Then he said: 'install' is on the 'photoshopelements_9_LS15.dmg' Safari downloaded disk image this disk image today at 13:33 from trials2.adobe.com
I had to replace my hard drive and cannot find the disc for my Photoshop Elements 9, so I need to download on the internet. I connected to Adobe and got my serial number when I bought and then went to downloads. There is only one place that has an option to download items and it is grouped under 9,8,7. I downloaded and then it opened and when I click on install, I get the above message. I don't understand what else to do. I don't mind the upgrade if that's what I have to do but didn't have the 9 items I bought initially already installed on my computer?
Help, please... I am not very computer detailed help would be greatly appreciated.
CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan
-which means you are trying to use CS6 and earlier at YOUR risk of having problems
Maybe it's a fake because of Mac El Capitan and OLD programs error
This information is a MUST to install old programs on Mac El Capitan
-You can't get the same error message, but here are some links that CAN help with old programs
Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)
-also a TEMPORARY security change https://forums.adobe.com/thread/2039319
-the guardian https://support.apple.com/en-au/HT202491
-
Recovery of DNG issue: I have photos stored on an external hard drive which have previously been imported into Lightroom and converted to DNG. The laptop on which I was running Lightroom died and I had to replace the hard drive and rebuild the computer. In the process of my Lightroom program and catalog related to these images have been lost. When I re-associate these photos with my new installation of Lightroom and a new catalogue is there a way to retrieve the keywords or other changes or metadata catalogue Mountaga? Is any of this information embedded with the imge DNG file or was it only in the cataloght lost on my failing hard drive? I re-import just as if it were new images with no prior treatment of Lightroom?
By default, LR saves all changes in the catalog, and that applies to any type of file.
Optionally, you can save changes to the file as well, for raw files owners, this will create a xmp file - for DNG that changes are going to be cooked in the file, without additional xmp file.
But it does not default. Go to the catalog and parameters under the control of metadata automatically save changes to XMP.
Unless you do this, the changes are saved only in the catalog.
Hope this makes things clearer.
-
I recently had to replace the hard drive on my Mac and I need to re - install CS6. I have problems to download the product again.
What problem are you having with the download? Here are a few links if the only problem is finding a.
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html
-
I had to replace my hard drive and need to reinstall Acrobat Pro. How to achieve this?
I had to replace my hard drive and need to reinstall Acrobat Pro. How to achieve this?
Hi Roger,
Please visit: http://www.adobe.com/downloads/other-downloads.html
I hope this helps.
Concerning
Megha Rawat
-
Had to replace my hard drive. Was able to load the loaded windows 8.1 desktop (new), but can seem to find how to load Acrobat Standard, I have my license and you can't reload acrobat
Hello
Could you please tell the version of Acrobat you want to download so that we could provide you the specific download link?
Concerning
Sukrit diallo
-
I had to replace the hard drive on my computer and lost the installation that I pay every month for. How to install the Adobe Acrobat Pro XI on the computer again?
You can download using any one of the 3 methods.
But if it's XI Acrobat Standard, only the first step will work.
For Acrobat Pro XI, you can use one of the 3 methods.
1)
Sign in to www.cloud.acrobat.com
Then sign Adobe ID and password, and once logged in, click on the Acrobat button, it will provide you download link.
2)
You can download Adobe Creative Cloud applications:
https://creative.Adobe.com/products/creative-cloud
Reference: download, install, update or uninstall applications
3)
You can download it from Acrobat Pro XI of direct download link.
During installation, select the optoin: installation using the serial number / subscription.
-
I had to replace my hard drive and can not get my Photoshop CS2 9.0.2 to activate. I tried the phone and the Web site and have two serial numbers. I can't find a number that strives to speak to a live person at Adobe. I need to reduce the size of the pixel today on some photos and need the program. Is there another way to reduce pixel if I can't get my Photoshop runs today?
See the page linked below. Your installation/serail number will not work. You need to acquire a download for it with a specially assigned serial number...
CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.
l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm
-
How can I download adobe on my computer again? I had to replace my hard drive
I had to replace my hard drive and now need to reload all my programs.
Thank you
Julie
Which version of elements?
What operating system?
Maybe you are looking for
-
How can I move the bar tabs at the bottom of the window, if it is possible
in firefox 11, it is possible to move the tab at the bottom of the window bar? I know that this could be done in firefox 10, with a simple change in the userChrome.ccs file. Any help would be appreciated
-
Live USB of Lenovo ideapad u510 w/Fedora 19 black screen
I'm having trouble with a new lenovo ideapad u510. I try to install Fedora 19, using the Fedora Live USB image 19 xfce spin, the player starts correctly, but when you select the option to boot Fedora 19 Live, I get a screen that is gray with a cursor
-
I have a Windows XP computer that displays an icon in the status bar there is an update available. The update is "A security update for Microsoft XML Core Services 4.0 Service Pack 2 (KB954430)." I installed this update 13 times and still the icon
-
Can not defragment drive c.
I am running windows7 and when I go to Accessories, and then System Tools defragmentation it is only showing the d ' training, recovery. Why it does not display the drive C to defragment?
-
Cannot print after replacing the 2wire modem
Original title: I use my laptop exclusively. Recently, the 2wire modem was replaced, and everything continued to work perfectly, except for the fact that I can't print. What should I do to correct this? No changes have been made to my laptop after in