I had to run restore disks to bring my XP Pro machine to its original shape - SP2. Now update usually run at all. I get errors 80240036 and 8024400 a, but help posted forum didn't workked

Similar Questions

• When I try to run microsoft difficulty I get: Error Code: 0 x 80040154

  I downloaded Microsoft fix it. Wehn I try to run a fix I get the error Code: 0 x 80040154. How can I fix it?

  Hello Jascar,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to a Fix - It utility and would be better suited to the community of Fix - It. Please visit the link below to find a community that will provide the support you want.
  http://social.Microsoft.com/forums/en-us/fixitcenter/threads

  Best regards

  Matthew_Ha

• How to bring back the .dll files to its original state?

  Hey there's good people!

  Today by chance I opened a DLL with notepad now all my files are changed in the Notepad file. How can I get my dll file returns to its original state on how it was before? Where I could see the two bolts of small image on each dll file?

  Thank you very much!!

  0ne love

  Vally Pally

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• My husband put password & didn't write to the down-now I can't access the privacy settings... and security can you help

  It was on my laptop - it entered the password on his own voliton but do not write it down. I want to control my laptop - can I get a permission to change password please.

  Thank you all for the helpful suggestions. Ultimately my husband deleted the program and then reinstalled, and I could not enter any password.

• Change of material and restore disk problem

  Hello

  I have a HP 3015MT desktop computer next to me that I recently had to replace the motherboard (part no HP) and the hard drive because of the failure. For this reason, I can't use all of the restore disks supplied with the PC. When I try, I get an error indicating that the restore disks are intended only for HP machines. I don't have a spare OS license (do not have a volume contract). -What can I do to get this working or I'll just have to buy a new license? Preferably, I don't want to go this route that we still mainly use XP and I don't want to roll a Win7 machine for 1 user.

  Someone at - it ideas?

  Thank you

  Paul

  If you replaced the motherboard of your computer desktop with a card mother no HP then it is no longer a HP PC. Recovery software examines the BIOS for a tattoo of HP. A card mother HP no won't tattoo of eligible product.

  The operating system license is only valid for the HP product, with which it was delivered.

  Sorry to give you bad news.

• Windows keeps freezing, then running dskchk to restart and still then freezes Help!

  Last night I've used Skype and some other Web pages open as well when my computer suddenly froze and I had to reboot. When I did, he worked briefly, but froze again. On the second reboot, he said he had to check the drive for consistency. Everything went well and was able to use it again for a few minutes, but when you type in a document in word, I got the blue screen of death, which said BAD_POOL_HEADER. However, after restarting, I not had the BSOD again. It freezes just up during use, runs the check of the drive even again and again, but continues to freeze later. The arrow works, but absolutely nothing else. I can't even run the computer in safe mode.

  I also noticed it says "recovering orphaned files" and "error correction in the index $I30 in file 50705" throughout the dskchk. There was something to find 19 unindexed files as well. In addition, the last time that I have restarted, he said that Skype is a corrupted file. I uninstalled Skype but this does seem to doing nothing at all.

  Looks like there's a LOT of different things going on here and I'm not that great with computers so I don't know what to do. All I can find are forums online and none were particularly useful. I live in the South of Senegal, so I can't exactly go to a workshop to repair either...

  Is - fixable? Please help me!

  Hello

  You did changes to the computer before the show?

  
  Method 1:
  Start in safe mode and then try to run chkdsk.
  See this link for the how to start in safe mode:
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
  See the link to check your hard disk for errors:
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors
  WARNING: Microsoft does not recommend interrupting the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. For security, you can back up your data before using check disk drive if you can. Defective sectors found while making the disk check would result in a loss of data.
  
  Method 2:
  I also suggest you to run chkdsk utility fromWindows recovery (WINRE) enviornment and check if that helps you solve the problem.
  Follow the steps below to start the computer using the WINRE and run the chkdsk utility.
  a. Insert the Windows Vista installation disc.
  b. restart your computer.
  c. If prompted, press any key to start Windows from the installation disc.
  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.
  d. choose your language settings, and then click Next.
  e. click on repair your computer.
  f. Select the operating system you want to repair, and then click Next.
  g. on the System Recovery Options menu, select command prompt.
  h. type the command chkdsk C: /f /r and press enter
  Access the link below to learn more about Windows recovery options in Windows Vista.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

• You try to run the backup under Vista, error 800704 3

  My computer uses windows vista Home premium. When I try to run a backup I get error code 800704 3. I don't know what is this error, anyone know and how to fix it.

  Hello

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc (Vista, full and professional company)

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Help: Floppy Drive gets error "Windows - no disk Exception Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c treatment".

  Dell Deminsion 3000, Windows XP Pro SP3, Version 2002, Pentium 4 processor 2.8 GHz, 2.00 GB of RAM disk Y-E Data YD - 702D

  A: floppy drive appears in my computer and in Device Manager where you can read it and the controllers are working properly.  But the diskette in the A: drive is not visible in disk management.  I tried UN-installing, re-installing and updating readers.  I also did that the BIOS was set to Auto & 1.44 3.5.  What can I do to fix this?

  Hello

  This problem seems to be caused by software conflicts or by malware (virus or spyware etc.).

  I suggest you to follow these steps and check if that helps:

  Method 1:

  Try to run the scan on the computer online and check if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Method 2:

  Try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• I can't run the Microsoft Fix it Center. The message I get "error Troubleshotting Wizard cannot continue.

  I just installed Microsoft Fix it Center. Now I can't run the Troubleshooting Wizard which gives?

  Hello
  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try the running System File Checker and see if it helps:
  http://support.Microsoft.com/kb/310747

  Method 2:
  Try running disk error checking and see if it helps:
  http://support.Microsoft.com/kb/315265

  It will be useful.

• Get 'error, cannot start. Setup can not continue"message when you try to run autorun.exe Fifa 2011

  Original title: error

  In fifa 11 when I run autorun.exe and put the serial key it says: error: could not launch. Setup cannot continue.     What should I do?

  Please help me!

  Hello

  Check if the game is compatible with Windows Vista Compatibility Web site.

  In the meantime, I would suggest you follow these steps and check to see if they help.

  Step 1:

  a. right click on the file and run as administrator.

  Step 2:

  Run the game in Windows compatibility mode and check if that helps.

• Satellite L350-235 a restore disk runs on a brand new HARD drive?

  Hello

  My hard drive is dead (completely) 3 days out of warranty.
  Recovery discs has not yet loaded, all I had was a black screen and a mouse pointer.

  So I bought a new hard drive. Problem I have now is how to install Windows on a new drive.
  What should I get Toshiba?

  I obviously paid for Windows Vista, when I bought the laptop, so I'm a little confused on what to do next.
  A restore disk will work on a whole new drive?

  Thanks in advance

  Hello

  Didn t drive recovery does not happen with the laptop because you had an option to create one using the preinstalled Toshiba recovery disc creator.

  You now have this disc which can be ordered here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Boot from that disk and follow the instructions on the screen.
  The recovery disk works also with the new HARD drive!

• Check the disk does not start if he had to run when you restart the computer.

  I selected automatically fix system errors file and Scan for and attempt recovery of bad sectors.
  I was prompted to reschedule the disk check for the next time you restart your computer. 

  However, when I rebooted my computer, nothing happened. No disk check has been performed. I tried tha procedure above a couple of times without success.
  
  
  Someone please help I was able to do this before, but can't do the job now?  Thank you.

  ACHOIWONG,
  Well, it's system files to discover good good news.  Is probably why chkdsk does not work due to not having permission start upward.  Try to run it from an elevated command prompt:
  Click Start and type cmd in the box start the search.
  Right click on cmd in the list programs, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  At the command prompt, type chkdsk c:/r

  Try and let us know if it works.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP OEM Vista restore disks work after installing Windows 7 RC?

  The title of the post pretty much everything says. I would like to try the Windows 7 RC, but I also wish I could go back to Vista, at some point. It seemed that the restore disks did not have a complete reinstall the last time (it resets windows pretty quickly). If I load Windows 7 RC, I'll be able to use my restore disks from HP to postpone Vista on my system?

  Thank you

  Pete

  If your specific working set of restore disks really depends on if they were created successfully; However, a set of disks of restoration work should certainly work. At least with my CL Pavillion DV-4-1287, Recovery Manager also continued to work after an upgrade to Windows 7, then a reinstallation via clean install without shaped.  Initially, he works with none of the additional steps, in the second, I just need to copy the application on of c:windows.old\program files (x 86) \sminst.  Unless you have reason to do so, while a clean install is the best route, I wouldn't do a format with a clean install, since all your drivers are stored in the Windows.old folder and (dependent on model) the swsetup folder.  Windows 7 can not find the drivers for all devices (five in my case) but on my machine all drivers Vista has of worked - just needed to point the manual driver update function to the appropriate folded equal windows.old or swsetup. BTW, while drivers Vista came with my laptop running Windows 7, the same is not true for some recent updates on the website.

  Oh, one last thing would be to update the BIOS before installing Windows 7 from the Flash of the bios Setup program is not yet certified for Windows 7 (no surprise since it's always a BONE development)...

  Stephen

  Message edited by SWY on 01/06/2009 17:45

• Satellite L300 - Question about restore disks

  Hello, woner if anyone can offer some advice, I recently had my laptop repaired due to a fall.

  However, I thought the operating system needs to install. Confused as performed here, but instead to send back will do it myself.
  I am running Genuine Windows Vista Home Premium, or it is a case of purchase of these discs and their execution, no idea about computers, don't know if there is another way. I did creat restore disks, but using them had constantly message saying waiting for the drive to become available, now it says only: insert installation discs.

  Any advice appreciated help.

  Hi tarajanes,

  To be honest I really don't have a clue what you mean exactly because your ad is not very clear.

  Are you using the Toshiba Recovery disk to restore windows? If so, you will need to insert this disk and boot of it. Then follow the instructions on the screen.

  In case you get an error message: what message you get exactly?

• Question about Tecra M4 system restore disks

  I am looking to buy a Tecra M4. Toshiba provide a "correct" restoration method I have no problems with restore disks, but have had problems with windows restore sometimes. They provide a factory restore disc or I have to look at the creation of a Ghost disk.

  I need to know just if I can start lookging for a good approx. ghosting before buying.

  Thanks for any help in advance.

  Hi Robert,.

  Portable Toshiba computers are sold with an OEM "bundle" of the software. This means that you will receive either a CD/DVD that contains an image that can be restored to the full version of the software, or a file preloaded on your laptop from which you can create your own drive can be restored.

  This disk can only be used to completely restore your system to its original factory condition, and you cannot use it to selectively restore files or individual components.

  You can also receive a tools and Utilities CD/DVD that contains specific Toshiba provided to public services.

  If you want to create your own backup copy of your data/system files, then you will need to invest in one of the packages commercial (I use Acronis True Image myself) as well as an appropriate external environment (I use a USB hard drive).

  HTH

  Post edited by: NickyNoogle