I hate the secure boot and a permament legacy boot startup sequence.

I'm a new 700-074 8.1 running office.

I have a Pavilion old Pentium 7-year-old who was running out of steam with new programs requiring a 64 bit OS and more memory.

So, I got the urge.

I like the image of the entire disk to an external drive once a month via a USB connection through a USB 3.0 adapter.

I like the 2014 Acronis True Image program.

The program may take a bootable cd, or it can be installed in the computer.

When run in the computer, the computer must restart once the program installs a startup program.

After I did it, the computer went to a black screen and wouldn't start. Had to call HP.

I removed the program and decided to use the bootable cd.

Don't see the cd because of the secure boot.

With the help of HP, I was able to go into the legacy boot and download Acronis to run but he warned me that my target reader wouldn't start because it has been formatted to MBR and not GBT.

So I reformatted the external drive at GBT but it seems to reboot the computer is returned to the secure boot.

On my flag, I have had trying to start first on the cd drive and then automatically try the first hard drive of the computer.

I seems that legacy boot can start only once on a single device before returning on secure boot.

Is there a way to keep the computer in legacy mode and try in order the cd drive then the hard drive?

When you ACTIVATED 'Legacy Support' is not disable "UEFI". Peripheral boot UEFI still have priority and will start as such. The cloned drive should start just fine, as long as the UEFI / GPT boot structure remained intact on the clone.

If you have any other questions, feel free to ask.

Please click the 'Thumbs Up' white LAURELS to show your appreciation

Tags: HP Desktops

Similar Questions

  • Pavilion P7 - 1597c: can a failed HD replaced by another brand - without impacting the Secure Boot UEFI?

    My PC is a Pavilion P7 - c 1597 (Windows8) preinstalled.

    I want to replace a failing drive and do a reinstall complete a commercial version of professional Window8.

    I am concerned about the impact that could have on the UEFI firmware / signatures Secure Boot on the PC.

    Do I need a HD HD (or PC) manufacturer signed device driver?

    Or the complete reinstallation of the W8 Pro will receive the drivers that I need to keep Secure Boot working properly?

    Any ideas or advice you can offer are sincerely appreciated...

    Rwgarre, welcome to the forum.

    The hard drive do not have a negative effect on the Secure Boot.  It seems that you should have all the drivers you need.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • G70-460US Notebook PC: Update No. Bios to activate the Secure Boot

    A friend ask me to upgrade its G70-460US Notebook PC to 8.1 Win Vista.  The bios isn't a place safe boot option and what verification HP update for this machine does not show it no more.  It this laptop to old update to Win 8.1?  If not, where can I find the upgrade of Bios with the Secure Boot option?

    Hello

    Unfortunately, the machine is too old to support secure - start the restriction is due to the limited capacity of the bios chip.

    For more information, see the thread on the following link.

    http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/consumer-notebooks-and-Windows-8-overview-of-BIOS-updates/m-p/1984731

    Kind regards

    DP - K

  • Printer Photosmart 5520 problem:, I have access to the secure page and cannot open a session

    My printer does not print in black. I followed all the instructions to fix it. I can't go down loard that assistance because it is a Vista. I get to the secure page and he asked my name and my password. I am the administrator, but it does not accept my names or passwords and blocking me. What name and password it seeks?

    Hi @arts4pat,

    Welcome to the Forums of HP Support!

    I see that you get a secure page and that you are unable to print black on your HP Photosmart 5520 e-all-in-one printer. I'd be happy to help you with this.

    I like that you get the login screen for the Built-in Web server for the printer. Is this correct? This seems to indicate that someone has put a username and password on the printer, for security reasons. If you don't know what are the connection information, the only way to remove this is to do a factory reset on the device. I can send you this information in a private message. In the forum next to your handle name simply click on the envelope to see.

    That being said, I would like to start here. Please, try the steps in this guide, the printer prints blank Page or fact not printing black or color ink for HP Photosmart 5520 and Deskjet Ink Advantage 5520 series e-all-in-one printer.

    NOTE: This problem may be caused by problems with the ink cartridge print head or with the printer ink system.

    If you have completed all the above steps and your product still has a problem, the printer service.

    Contact HP for service in all countries except Asia-Pacific.
    First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
    Cost of repair out-of-warranty printers may apply.

    What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
    Step 1. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to choose your
    contact options»
    Step 4. Scroll down and click on: contact HP options - click Get phone
    number
    File number and phone number are displayed.

    I hope this helps. Good luck!

  • I try to run the security essentials and it tells me that I'm missing msvcp90.dll

    I try to run the security essentials, and he tells me that I'm missing msvcp90.dll. Same problem occurring with a real player has not re - install. How can I recover file?

    Hi BradleyMitchell,

    1. did you of recent changes on the computer?

    2 when was the last time it was working fine?

    3. what version of Real player installed on the computer?

    Msvcp90.dll error can be caused if the Visual C++ Library Runtime components are missing or corrupt on the computer.

    Method 1

    I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

    The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

    http://support.Microsoft.com/kb/310747

    Method 2

    If the previous step fails, then install the Package redistributable Microsoft Visual C++ 2008 and check if it helps.

    Microsoft Visual C++ 2008 Redistributable Package (x 86)
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

     

    You can also post your request in the Microsoft security essentials forums using the link below.

    http://answers.Microsoft.com/en-us/protect/Forum/protect_start

  • Microsoft will work on which allows us to make changes on the common equipment and reconfigure the secure boot?

    Hello

    I like the idea of starting secure if it can help keep your system root kit virus cleaning.

    I don't like the fact that I can't do a simple upgrade of my hardware (SSD in my case) and turn on secure boot.

    I don't understand upgrades material correctly is a trade out of security?

    Are there any plans to allow the user to upgrade the hardware and have secure boot?

    Thank you

    Keith

    Hello Keith,

    Thank you for your response.

    Please refer to the advice given in this help article and check if it helps.

    Windows 8 with Secure Boot enabled can start is more after installing new hardware
    http://support.Microsoft.com/kb/2800988

    You can try to contact the manufacturer of your computer for any other questions about creating keys.

    I hope this helps.

    Thank you

  • MacBook (running 10.6.8) works only in the secure boot? What's wrong?

    I woke up my MacBook to mode 'sleep' when I suddenly had a kernel panic.

    After stopping and restarting my regular boot of the computer, the MacBook will run after the gray apple screen.

    but after that, it hangs on a gray white screen and refuses to go to the login window.

    However, on a secure boot, the MacBook starts as it normally should.

    I managed to restore my MacBook 10.6.3 and after that, he started on a regular boot,

    but after using the built-in software update upgrade to Mac 10.6.8 the same problem comes back.

    My Macbook will start only at startup, once again.

    I tried:
    -MSC reset

    -Reset the PRAM

    -Try to use disk utility, but the button "Repair disk" grayed out.

    Is there a solution to this problem?

    When you tried to use the disk utility to repair the disk, you start from the DVD, or did you get this to run in OS X?

  • Satellite P840: How to create the secure boot with UEFI Bios recovery disk

    Hello

    I have laptop P840 that came pre-installed with Windows 8, which I've upgraded to Windows 8 Pro.
    I then updated to Windows Pro 8.1 by Windows store. Please notify:

    1. how to create a DVD repair or start for windows 8.1 pro with UEFI Bios and boot secured.

    2. I created a USB recovery using the control panel in Windows Pro 8.1. It starts OK. It will be the same as that I've created using the Toshiba Media recovery creator or will it drivers Windows Pro 8.1?

    3. check partitions with disk management, then 3 (450MO, 350 MB and GB 10.90) recovery partitions, 1 EFI system partition and 2 primary (C: programs) and D: for data. I created the recovery DVD and USB 2 disks. Can I remove the 3 recovery partitions?

    Your help will be very appreciated.

    Best regards

    Romero

    I found your previous thread on this topic:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=74272

    > 1. How to create a DVD repair or start for windows 8.1 pro with UEFI Bios and boot secured.
    To be able to boot from sources other than the drive HARD internal, the boot mode must be set to the CSM and secure boot must be disabled!

    > 2. I created a USB recovery using the control panel in Windows Pro 8.1. It starts OK. It will be the same as that I've created using the Toshiba Media recovery creator or will it drivers Windows Pro 8.1?

    Your laptop has been preloaded with Win 8. Right? For example, the USB flash stick memory you just use the Toshiba Recovery media creator contains the Image of Toshiba with Windows 8. Don t mix this Toshiba image with the image that can be created using Microsoft's own backup and restore function. Both are different pictures!

    > 3. Check it with disk management, then 3 (450MO, 350 MB and GB 10.90) recovery partitions, 1 EFI system partition and 2 partitions primary (C: programs) and D: for data. I created the recovery DVD and USB 2 disks. Can I remove the 3 recovery partitions?

    The last partition contains the files on HARD drive recovery. Usually this partition will be created again when you use the Toshiba Recovery disk to put the laptop back to factory settings. So in the case where you n t need this files or the partition, you can delete

  • HP Pavilion p7 - 1267c p: Desktop Computer has no option to dissable the Secure Boot

    I tried and tried and tried and tried, but I found no option to dissable start secure on my computer. The only option I found is in my BIOS, that is to dissable the sources of the boot. Which does nothing, because the computer still does not start with the installed graphics card. The BIOS seems to be obsolete, with a version of 2011 compared to version 2012, I saw in the step-by-step procedures, but there is no update for the BIOS avalible. I have also entered the advanced developed boot Windows 8.1 and found nothing related to UEFI. I am frustrated beyond belief and would apreciate any help out there.

    Ryan, welcome to the forum.

    According to the specifications of the computer, it came with Win 7 Home Premium 64-bit installed.  This means that it didn't Secure Boot or UEFI.  HP didn't start using UEFI until mid-October 2012.  Your computer was released in December 2011.  Install simply earn 8.1 does not change the BIOS.

    There is a BIOS update for the motherboard, but it's for Win 7.  This means that you will need to perform a system recovery to take the computer to its original with Win 7 Setup to install it.  However, it is not correct the problem you are experiencing.

    If you try to install a 700 series card, they need UEFI.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • What happens if I don't remember the security issues and I'm stuck on my email?

    I don't remember my answers to security questions, and I'm also stuck on my email

    Hello

    As you can not receive emails, you will need to contact the Apple Support.

    The information is available here:

    Contact Apple for assistance with the security of the Apple ID - Apple Support accounts

  • I need to create public and private keys for the security certificate and I can not find the certificate. Where is he?

    I bought a security certificate, and the site tells me that it has been installed successfully. I need to export the certificate so that I can create public and private keys, but I can't find the certificate to do so.

    Firefox (Firefox Orange) > Options > Options > advanced > Certificates > authorities > export

  • How to change the secret question and answer if I've forgotten my email of rescue?, how change the security question and answer and if I've forgotten my rescue by email?

    How to change the secret question and the answer if I've forgotten my email to rescue?

    You have to ask Apple to reset your security questions. To do this, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.


    (137073)

  • Microsoft Update: Could not get to the site because the requirements for activex but no pop up displays to allow picking to run. Went through all the security setting and security tools disabled. setting are the same that second pc where MS Update works

    Without much to say... can't make MS Update site

    Hello shaimls, welcome.

    I apologize if I'm running on all the steps you have already tried, but give it a shot:

    * Disable all antivirus/security software is installed on the machine. Internet Explorer can not effectively block ActiveX content in this case.

    1. open Internet Explorer
    2. at the top right, click on tools > Internet Options
    3. click on the "Advanced" tab and click on "reset...". "all the way down
    4 confirm you want to reset all settings to the factory settings
    5 restart the computer

    ---
    After the reboot
    ---

    1. open Internet Explorer
    2. at the top right, click on tools > Internet Options
    3. click on the security"" tab.
    4. click on 'Trusted Sites' chart to select
    5. click on the button 'Sites '.
    6. Add the following text to the list of trusted sites

    http://*.windowsupdate.Microsoft.com/*
    https://*.windowsupdate.Microsoft.com/*

    Afterwards, click on "Ok" or "Ask" to all windows and restart the computer. Then try to update Windows.

    Let us know what happens

    Thank you! Ryan Thieman
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Cisco Unity Connection (CUC) - import LDAP user based on the security group and then assign a model

    Need to CUC automatically import users and assign a certain user or role model if they are added to a specific security group. (These are the help desk users).  Username admin accounts they will use to sign in CUC differs from that there windows account that is linked to their profile of voicemail.

    Current - now we must import new recruits and assign the correct model

    Want - when a user is added to a security group in AD, so when CUC doing his nightly sync, it automatically import user and assign a preconfigured for the account and all user model is automatic and I have never import it back these users.

    At the present time the course help desk users are already imported via LDAP and have the role that was.

    Suggestions?

    Not something that the UCA can do out of the box.

    The UCC does not offer, is to do the LDAP synchronization and once they are in CUC, to import, choose the model.

  • Creating table in the schema has with the user B and granting permissions to the user C

    Hello, I have a problem fun - we have a large table which requires a batch to make millions of updates, and he needs to finish more quickly. It takes several hours as an update, but a select create table did the same thing in about a minute. Yay! Then we just delete the old table and rename the new table to the former, rebuild all the index and grant select/insert/update/delete permissions to another user who needs access... and there is the problem, Oracle said insufficient privs.

    We have A figure, which is the owner of the table, userid B who done all the stuff of application batch and userid C which performs inserts for a process of middleware. None of them are actual users, of course. We want that user B to do the ETG, rename, rebuild and re-grant of the authorisation of the index. But user B apparently cannot grant permissions on objects in the schema A to user C, even if B has created the table and has the role DBA (not ideal, I know)!

    What's really crazy is that there is no sense unique user b can grant permissions to user C, which is to:

    grant select any table USER c;
    grant insert any table USER c;
    grant update any table USER c;
    Grant delete any table USER c;

    It seems really perverse can create tables in diagram A and even grant C privs "whole table" that user B, but may not grant privs specifically on this object in the schema A, even with DBA privs. I must be missing something... right?

    Yes. By default, the stored procedures are stored procedures from DEFINER rights. If A is the owner of a stored procedure, this stored procedure can do whatever A enjoys the privileges to directly. If A grants B privileges RUN this stored procedure, when B calls the stored procedure, the procedure runs with the privileges.

    I agree point stew, however, re-creating objects in Oracle is generally a bad idea and a TRUNCATE with one insert direct-path, possibly combined with the deactivation and the rebuilding of the index would be more appropriate than a DEC. If you're going to stick with this Assignment, however, that really do in a stored procedure owned by A while B has no need to CREATE ANY TABLE.

    Justin

Maybe you are looking for

  • Disk HARD & CD/DVD ROM need replacement - it is better to replace them?

    Hi, I have a laptop of Satellite S5200-701 that I had for about 8 years. It has been a good laptop and I had no problem with him, but he must show his age that I have now two problems. 1. I think the HARD drive is about to pack up, as it started maki

  • Z2 Vibe pro photo size?

    Cand onyone to change photo size? I mean some apllication or need smaller size photo for example 500Ko or max 1 mb. How can we change photo size? I've looked everywhere but I coulnt find? 16 MB pictures the camera takes 3-4-5 MB and its so great for

  • How can I transfer outlook express files from windows XP to windows 7 on my new laptop?

    I was able to transfer my address book, but unable to transfer my e-mail files express outlook my desktop (Windows XP) to my laptop (windows7).  I used an easy transfer cable, but have all the files I wanted.

  • default restore microsoft xp fonts

    The fonts on my XP desktop and menus have been changed and now appear terrible. I can change things, but they are not displayed correctly. I want to restore my default fonts and settings. How?

  • Computer does not recognize router befsr41 after that I tried to reset it.

    So earlier today, I tried to reset my router because for some reason that I could not log in with my password I use normally, after switching to AT & T of the Charter (from DSL cable) Just after that, we moved the router does not either, but we calle