I have 3 computer Aspire 5600U who noted starting with a USB 3 device plugged into the USB 3 port
He did not become a problem with constant updates of Microsoft for Windos 10 check daily all 3 computers to see if the device USB 3 must be disconnected before the reboot may end.
last 10 Microsoft Windows Upgrade installed yesterday and now, the problem seems to have resolved itself.
Tags: Acer Desktops
Similar Questions
-
So, I recently noticed that my Acer laptop has a problem when it comes to games. The speed of the CPU is really low when you start a game, I did not notice this until a few hours before... I was playing Borderlands 2 and I am disconnected from my laptop to move it to my office and I noticed that my FPS has increased almost double what they were before, I plugged my laptop for the charger and I started to look at the the CPU cores, each carrot got preatty fluctuating between speed and low speed. I've tested this with all my games and all had the same results, for example a Borderlands 2 area when it is plugged in the exercise was about 18-22 FPS, but when disconnected from the charger the FPS increased from 34-48 or more. I tried to read a lot of things on the web and can not find a solution to this...
Another test I did was with Dolphin Gamecube emulator, the FPS when playing the legend of Zelda The Wind Waker varies between 22-26 or lower on the places of strong thickness, when unplugging my laptop charger I have 30 fps constant in these heavy areas.
Also with Counter Strike Global Offensive, the game normally ran about 50-60 FPS in all the cards and then tested without the charger plugged in and got 70-120 FPS on all cards
https://www.YouTube.com/watch?v=xc6Hwgedqmo
This video shows exactly what happens for me, unless I have an AMD GPU and CPU.
My Acer Aspire V5 552 Specs are.
Windows 7 X 64
8 GB RAM
AMD A8 - 5557M @2. 1 GHz to 2.8 GHz Turbo
AMD 8550G GPU
I have all the latest drivers and updates installed.The charger is not damaged, it is original one supplied with the notebook.
Got a nice deal on a MSI gaming laptop. At first I thought that the Aspire V5 has been an excellent laptop for budget games, but then turned that has a performance problem that ruined the processors to give power maxi while only plugged in, but when unplugged the other way around. Still a nice cell phone with potential wasted with this particular problem.
No solution to this problem, tecs don't even bother looking at BIOS like other manufacturers of laptop to solve this same problem.
-
I like the sound of my ipod dock better than the speakers external computer. I'm looking for a way to use the dock AS my computer speakers.
The iPod speaker-dock accessory has an auxiliary audio input. It looks like the headphone jack of the iPod. Or, it may have a pair of "RCA" (red/whtle) connectors, for audio input. In both cases, you can use the audio cable to connect your computer to the speaker-dock. For example, if it has an auxiliary input, you can use a cable like this (assuming that your computer has a headphone jack for audio output)
http://www.Amazon.com/Monster-AI-800-mini-7-iCable/DP/B002E9HHZQ
-
Connector MagSafe 2 (the part that plugs into the computer) is getting very hot.
Hello! I have a MacBook Air (Early 2015) and when I load it, the plug that plugs into the laptop is very hot (I can barely touch). This only happens when I use the computer while I am it loads. When MacBook is in mode 'sleep' the plug only heat. Is this normal or something in my MacBook is broken?
Hello...
Make sure it is well ventilated > use and maintenance your Apple MagSafe adapter - Apple Support
-
Why have the many Cinema Display (especially the 2005-20-inch model) half-a-block of pine, to plug into the DVI-connector socket full large?
The other half-a-block of pines just doesn't seem to be there?
DVI can be single-link or dual-link. Resolution higher than 1020 x 1200 need dual-link.
http://www.showmecables.com/images/catalog/product/DVIQA.jpg
Sometimes simple link devices and cables use dual-link connectors, but with no wires connected to the pins double link, if you can not tell if something is dual-link just by looking at the connector.
-
all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?
If I shut down the computer and plug... he sees the thing then turned back...I can not just plug in while the computer is turned on... once again he has used to do this just as well... for some reason any, he sees things now.any thoughts?Hi KK Waddell.
Thanks for posting in the Microsoft Community.
I understand that you face the issue with the USB port does not work when you embedded on the front of the computer.
Before you start the troubleshooting steps, I need the information required.
1 did you changes to the computer?
2 did you receive an error message?
I suggest you to check with the other USB port.
I suggest you to see the links and check.
USB port may stop working after you remove or insert a USB device
http://support.Microsoft.com/kb/817900
Advanced troubleshooting tips for General USB for Windows XP problems
http://support.Microsoft.com/kb/310575
One or more USB devices may not work when you start your Windows XP-based computer
http://support.Microsoft.com/?kbid=885624
See also:
Hardware devices do not work or are not detected in Windows
-
I have a Dell Inspiron Mini Windows 7 starter from a pawn shop and it has the previous owner on this subject and I can not log on because I need there password. Can someone help me with this?
The only safe option is to perform a factory restore. If you do not, then you are likely to be confronted with a machine that is seriously infected or was hacked. Have a look here for instructions:
http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_336966&isLegacy=true -
I tried to connect a new TV to my 8700 with HDMI and I get this message:
This computer has an add-in graphics card and the monitor cable is plugged into the integrated video connector.
1. power off the computer
2. plug the cable from the monitor into the graphics add-in card connector. This may require a video card or the video adapter cable.
3. turn on the computerI unplugged from the back of the computer and put it in my drive macbook & blu - ray. Both worked.
I tried to find a solution to this already, but none really helped.
Thank you.
You need a video card, not the port on your computer HDMI connection:
-
When I run my laptop it will show the Acer screen with F2 F12 options then goes black with the cursor in the upper left corner and when windows should load it back to acer screen and will continue to do this until I got a smack on the side, and then it will load windows and run normally. I have created a disk image, bought a hard drive of ner, loaded my image on the new hard drive and it worked fine for a few hours to start and stop. Then he started to do it again and now I'm a little frustrated. Is there something I can do to fix this?
If you hit your device so it can start something is not properly installed in your laptop. This could be the RAM modules or your hard drive. You will need to open and check all of the components that are in any way connected to the motherboard.
There is another possibility that one of your components/devices of external periphery is cause of this behavior. Disconnect all external devices and check to see if that makes a difference.
-
I have a Sanyo 3810 phone that I got from Sprint. My contract expired and I went with cellular consumption. I don't have a place for a SIM card in this phone Sanyo. There are pictures on this phone I want to download on my computer. Some of them cannot be replaced because they are my granddaughter who died this summer, at the age of 2 years. I desperately need to find a way to get these photos developed. Please, please help me with this dilemma. I would be grateful what you can do. I bought a USB cord to connect on the phone and my computer. Thank you for your help. Glenda Gamez
Hi Glenda,
Welcome to the Microsoft community!
According to the description provided, looks like you want to know how to copy pictures from the sanyo phone into the computer.
However, we need more information about the issue to help you better.
Please help me answer this question.
What version of Windows are you using?
Visit this link for the operating system you are using.
http://Windows.Microsoft.com/en-us/Windows/which-operating-system
Here is a link that provides a soultion. Try the methods mentioned in this link and check.
http://community.Sprint.com/Baw/thread/41336
Note: Using third-party software or the link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software, or the link is at your own risk.
Keep us updated on the status of the issue. Using the windows-related issues feel free to post on Microsoft Community.
-
Camara photos do not show when plug into the computer's time a 2nd
If I plug my camara to the computer and show the image files and now when I plug it for the second time that the file showed that copy and the custom of photos to display at all in my computer or any other computer. who is wrong?
Does this have to do with Internet Explorer 9? In any case...
Please provide:
-brand and model of the camera;
-format of images, for example,. JPG or. NAVE;
-the version of Windows you are using.
There is usually a setting in the camera software on the PC that allows deletion of files on the camera after the files have been transferred. If you have not enabled then whenever you connect your camera, it will transfer all the files on the camera again.
In regards to pictures displayed, this may be due pictures in a raw owner who is not recognized by Windows 7, unless you install the codec from a specific manufacturer. Try making sure that your device is set to take the files. JPG or. Format JPEG as Windows will recognize these (or install the codec).
-
I have a xp desktop machine, an external hard drive, computer laptop xp and a computer laptop win7 on a network home via my Lynksys wireless router. My friend attached external desktop. Then shared these discs on the network. He shared them as drives E and F. I can access these drives very well. The problem is that on the computer laptop xp now when I click on my computer if there is no zip drives or anything else connected to the computer laptop USB ports it does not show them. If I go into Device Manager, it shows the mass storage device connected here.
Another thing. If external that are shared and the desktop machine is turned off the coast, I can click the icon to the desktop and it displays the zip drive, that I plugged. It's like I need to rename or remap something?
Hi crazypainter,
When you plugin your USB device, just follow the following process:
Rigth click my computer-> manage-> disk management.
You will find your hard drive, cd and USB dirve listed player, you can do a right click on the drive letter and click on modify.
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas: hours on the phone with verizon... nothing is ready to throw the Verizon mifi and go to TMobile... forums looking for answers but not help there... seems a lot of people have this problem... someone at - it help him?
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
A Beyschau of Annette
Hello
Quote: ' MiFi will not work unless plugged in to the computer.
Where it has been plugged in before?
If you are using to connect via Wireless, then it might be that your wireless connection has a problem.
----------------------------
Wi - Fi in general.
These steps and tell us where is the breaking point.
Check the Device Manager for the wireless card valid entry.
http://www.ezlan.NET/Win7/net_dm.jpg
If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.
Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.
http://www.ezlan.NET/Win7/net_connection_tcp.jpg
------------------
The wireless card drivers much also install utility wireless of the seller.
Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).
----------------
Make sure you firewall No. preventing / blocks wireless components to join the network.
Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.
If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .
party like Hello and NetMagic 3rd network managers can block local traffic too.
---------------------------
Stack TCP/IP work should look like.
Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.
http://www.ezlan.NET/Win7/status-NIC.jpg
Description is the data of the card making.
The physical address is MAC of the card number.
The xx must be a number between 0 and 255 (all xx even number).
YY should be between 0 and 255
ZZ should be between 0 and 255 (zz all the same number.)
The date of the lease must be valid at the present time.
* Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.
* Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.
---------------------------------------------------
A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.
Above everything is OK, you must be able to connect to the router.
Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.
If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.
Enable security wireless after you eat to make a functional connection.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
I have dell laptop computer (windows 8 pro with little Media Center x 64) ##genune, not cracked or pirated... #.
It worked fine until the evening yesteday and I was playing Holy 4th place after closing, I noticed that the battery is about to happen at 10% so I did it just to sleep for awhile cauz I haven't had none running around the House... shortly after came current I just picked up my cell phone, but suddenly I saw an error message indicating that "your laptop computer encountered a problem and needs to restart. We are only collecting the error information, and then we'll restart for you. (100 % Complete) If you want to know more, you can search online for this error: 0xc000021a "and there is no changing the screen as I waited for 3 hours now... I never had an error like this... pls hlp me...
Hello
Are which country you located?
Dell has wide global support. I suggest you to select the country where you are and check if you can get the recovery DVDs.
http://www.Dell.com/support/contents/us/en/19/category/contact-information -
Aspire S3 - will not start with the disc of recovery USB USB ports.
I try to use a USB drive to recovery W8 (made with the acer recovery management) in my S3-391. The computer starts not with a USB key into one of the ports. When turned on, the computer will display the "Acer" screen, then the screen goes black, then the "Acer" screen is displayed again, and then the screen goes black again. It buckle like that until I hold down the power button for a hard cock. Pressing F2 or delete only put the BIOS or something. The computer starts well W8 and BIOS without anything connected to the USB ports. I'm still under BIOS v. 2.07, but I don't know if that has anything to do with it, since I can't do the BIOS with USB in. I've never updated a BIOS but I'm decently computer and could probably google my way through it, if you think it will help.
Everyone knows that or something like that?
Thank you.
Well, I'm happy that we're sorted with the recovery disk!
With respect to the SSD, I found this.
Maybe you are looking for
-
best way to store photos on mac + external hard drive that will update automatically?
Hello I like iPhotos to see my photos, but I need a back-up. If I save photos using an external hard drive, then I might save the photos twice, three times or more! What is a good way to sync it? Thank you
-
How can I stop pornographic email sent and fill my Junk folder
I'm fed up with my junk e-mail folder is flooded with suggestive emails, I want to send them directly to the Trash because sometimes not all junk junk
-
Searchqu and naked Search installed on my laptop, but I think I deleted successfully their. But now I found 3 files linked in the C:\WINDOWS\Prefetch folder. The names are: SEARCHQU TOOLBAR UNINSTALL.EX - 2DC9C271.pf, SEARCHQUMEDIABAR. EXE - 24754703
-
When I'm on IE, I can type in the web address, hit "enter" and be directed to the place where I want to go. It is now in the Firefox application. Pretty weird.
-
How to assign container string Vi Teststand?
Hello I want to write the table setting in the global file to the test or. I have the .csv file listed with different string and labview Usign I want to put this string in teststant container. There is a test file, the file vi et seq., that I have at