I have 6 s phone is not connected to the iMac (retina 5K, 27 inches, end of 2014) using bluetooth

Hi every time I try to connect my i phone 6s with iMac (retina 5K, 27 inches, end of 2014) performances

connection failure ' jatin iMac is not supported.

Pls help its strange

Connect an iPhone to a computer is not supported.  Has never been.

Bluetooth: Why can't connect my iPhone or iPad with another iOS device or my computer?

Tags: iPhone

Similar Questions

  • Wizard BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

    How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

    This has two questions:

    1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.

    2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.

    3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.

    Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.

    The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.

    Then there is the BootCamp partition on the HARD drive partition #2.

    Is there a way to get what I need?

    That is what has been described in this notice of two canoes?

    Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3

    n-on-a-3-TB-fusion-drive http://twocanoes.com/Winclone/support/installing-Windows-on-a-Boot-Camp-partitio

    Thank you.

    After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.

    Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.

    A. take backup

    1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.

    B. fuse out of the merger in two physical disks drive: SSD + HDD

    1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)

    Cs diskutil list

    2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive.  Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,

    diskutil cs deleteVolume Logical Volume ID

    CS diskutil remove logical Volume Group ID

    This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.

    I hit this issue too.  To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:

    Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)

    and repeat for disk1/dev/disk1 which is the HARD drive in my case).

    This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.

    2 create independent partitions (non-fusionend) for the installation of OSX.

    Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".

    3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".

    C. install on the HARD disk as drive didier autonomous not fusion.

    1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.

    D. use BootCamp Yosemite f5 to install windows.

    1. launch Yosemite bootcamp.

    2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software.  Do not click on the last box to install or remove windows pie creating real bootcamp partition again.

    3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.

    4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use.  Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model).  Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.

    -From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.

    -Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.

    -Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.

    5. open Boot Camp Assistant again and only select the third option, install Windows 7.

    It will show you the screen to select what installation disk, select HARD drive.

    Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.

    For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.

    Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio

    6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.

    7. once the installation is complete, check that windows is functioning correctly.

    E. Si you want to upgrade to windows 10 Windows 7.

    1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page.  Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE.  Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.

    2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.

    F. reinstall OSX El Capitan

    Once your target windows system (if windows 7, windows 8 or windows 10) works very well.  You can continue to create again your Fusion drive and reinstall OSX El Capitan.

    1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

    2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

    3. on the selection screen, select start Yosemite OSX install drive.

    4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

    5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.

    6 type the 'diskutil list' command to list all disks and partitions.

    The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.

    The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.

    G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc

    1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

    2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

    3. on the selection screen, select start Yosemite OSX install drive.

    4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

    5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.

    Cs diskutil list

    6. in the terminal, type commands to delete logical drives from basic storage.  Note: All data will be destroyed in the logical drive.

    diskutil cs deleteVolume Logical Volume ID

    CS diskutil remove logical Volume Group ID

    7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.

    / dev/disk0 (internal, physical):

    #: NAME SIZE TYPE IDENTIFIER

    0: GUID_partition_scheme * GB 121,3 disk0

    1: disk0s1 EFI EFI 209.7 MB

    2: Apple_HFS GB SSD 121.0 disk0s2

    / dev/disk1 (internal, physical):

    #: NAME SIZE TYPE IDENTIFIER

    0: GUID_partition_scheme * 3.0 to disk1

    1: EFI EFI 209.7 MB disk1s1

    2: Apple_HFS 1.7 Untitled TB disk1s2

    3: disk1s3 Apple_Boot Recovery 650.0 MB HD

    4: Microsoft database BOOTCAMP 503.0 GB disk1s4

    5: Apple_HFS 801,4 Untitled GB disk1s5

    8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.

    diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5

    Note: Mark the group id of logical volume shown in the results.

    In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.

    So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2

    9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.

    diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%

    10 command "diskutil cs type list" to check the resulting fusion drive created.

    CoreStorage groups of logical volumes (1 found)

    |

    + Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E

    =========================================================

    Name: LVG

    Status: online

    Dimensions: 1815635525632 B (1.8 to)

    Free space: 90112 B (90.1 KB)

    |

    +-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3

    |   ----------------------------------------------------

    |   Index: 0

    |   Disc: disk0s2

    |   Status: online

    |   Dimensions: 120988852224 B (121.0 GB)

    |

    +-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E

    |   ----------------------------------------------------

    |   Index: 1

    |   Disc: disk1s2

    |   Status: online

    |   Dimensions: 1694646673408 B (1.7 to)

    |

    +--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9

    ----------------------------------------------------------

    Encryption type: no

    |

    +--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

    ---------------------------------------------------

    Disc: disk2

    Status: online

    Size (Total): 1809780178944 B (1.8 to)

    Reversible: no

    Name: Macintosh HD

    Volume name: Macintosh HD

    Content indicator: Apple_HFS

    LVG Type: Fusion, sparse

    11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.

    12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.

    13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.

    14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.

    15. yet once please take personal responsibility on damage if you follow the instructions in this article.

  • my new iMac (retina 5K, 27 inches, end of 2015) 4 GHz Intel Core i7, 32 GB 1867 MHz DDR3, TB 3.12 Fusion Drive bluetooth not working do not message comes bluetooth is not available

    my new iMac (retina 5K, 27 inches, end of 2015) 4 GHz Intel Core i7, 32 GB 1867 MHz DDR3, TB 3.12 Fusion Drive bluetooth not working do not message comes bluetooth is not available

    Reset the SMC.

    Barry

  • Phone will not connect to the casting of motorcycle USB?

    I can't get my phone to connect with motorcycle Cast USB. I use Zumocast for the wireless, but I wanted to use the Cast of the bike to sync my music and videos via USB. When I plug the USB in all starts automatically. A screen appears and tells me of his preparation for my camera, then another screen appears telling me to wait, it loads the content. However, this second screen has a large yellow triangle with an exclamation mark in it and lists of things to try if you have connection problems. I tried all the USB options that I have on the phone, he seems to force the connection to USB mass storage, so I guess that's where it should be. Any help would be appreciated. I thought it might be a problem of SD card, but I'm not having problems with the map I can say.

    It turns out that it was the SD card. After reading a few posts, it seems that you cannot have all the apps installed on the SD card, so I cleaned all the. It does not solve the problem of the bike to ride, but I lived some issues with messages to appear during a download app like "not enough memory to SD card", so I hope that he will address this issue. Time will tell. What seemed to fix my bike mount question was a stopover of force on an app called Evernote. I read this solution on another post, and that seemed to take care of it. It seems that Evernote has been attached to the top of the SD card and not let disassemble.

  • I have 6 music phone will not advance to the next continues to repeat song

    If you use bluetooth car, song keeps repeating and will not advance to the next song.

    I have the same problem, but I use a USB cable to the radio.

    Everything worked fine until I upgraded to the latest IOS 9.2. Everything works fine on the computer, but on the phone that you only get to play a song.  If you keep hitting the shuffle icon it changes songs but it's a pain.

    Come on Apple just your updates are not good enough.  How about testing before releasing upgrades.

  • Tablet and phone Layouts not connected to the desktop computer

    In the instructional videos and documentation I've seen on Muse, it is said that there should be a + mark next tablet buttons and phone in map mode. I created a site of office but the + marks are not on the tablet buttons and phone. I know that I need to copy the content to the empty pages, but empty pages are not even created for... which, in turn, means me that page attributes and metadata must be copied layout available. Someone know how I can connect my layouts of Tablet and phone my office layout? Thank you.

    Hello

    If the sign is not there, it means the provision is already created, if you can not see empty pages when you go to a special provision, you can right click and delete the page layout. The sign will come back and you can add the layout again.

    Kind regards

    Aish

  • I have IE6. I need to install service pack 1 Windows XP. I can download it, but I can't install it because it does not connect to the server. How can I work around this problem?

    I recently had to use the restore disc that came with my computer. Accordingly, I now have Internet Explorer 6. To switch to IE7 or IE8, I need to reinstall the Service Packs. I can download them, but I can not install them because I have IE6 and downloads could not connect to the server. How can I fix?

    Hi wildcar

    You can go directly to Windows XP SP3 . Download and install it from the link below.

    Windows XP SP3.

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

    Ignore the text that says: it is only intended for Professional computer and network facilities.

    Important note: If your system has an AMD processor, download them and install Microsoft windows update utility for the processors not intel from the link below, before you install Windows XP SP3.

    Update for Windows XP (KB953356)

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=23751

    After you are done you can try to install ie8 again, if it has not already been offered through windows update.

  • 9.3 IOS cannot be verified.  Says the Iphone 5 is not connected to the internet when it is.

    My Iphone 5 will check the IOS 9.3 update.  The message says that the phone is not connected to the internet when I know that it is.  What is the problem?

    There are widespread reports that older devices have problems with activation after the update. Your question is before the update.

    This seems to be a different problem, but I suspect it's really Apple prevents you from installing the update, you already downloaded, until they solve the problem of activation with the update.

    For those who connect via iTunes, you would see that you are already using the latest version, because this is now the latest version that you can download. Your phone has already downloaded, if Apple blocks you install.

    Wait for the update of the update. I bet that you should remove the 9.3-same already downloaded install file to your storage management settings.

  • How do we install the reader to a PC that is not connected to the internet?

    I have a PC that is not connected to the internet.  How can I install Adobe Reader on it, as a normal installation goes directly on adobe.com for the PC.  I was able to download the software to a memory stick, but it doesn't seem to be a single available for this file.  I tried to copy the contents of all the files in the drive thru to this PC, but as I expected, it does not work.  Please notify

    Hello David,.

    Adobe Reader download for Windows offline, see: ftp://ftp.adobe.com/pub/adobe/reader/win/
    Here, you click the offline more recent, complete with Adobe Reader version. This installation file, you can easily transport for example on a USB key and also to install it on computers that do not have access to the Internet.

    An important decision during the installation is the updates, so you should use the last option

    Good luck!
    Hans-Günter

  • "iPhone is disabled, connect to iTunes" AND "iTunes can not connect to the iPhone because it is locked with a password" error message on the phone and the computer! Help!

    So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".

    So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?

    As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.

    Recovery mode is described in this article as well.  You may try to go into recovery mode more than once to succeed.

    If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

  • phone will not connect to WiFi

    Hi, my phone is not connecting to WiFi
    It was fine to start with and now it does not work. I tested my WiFi with others and they all get the signal and excellent connectivity.
    My z2 is either stuck in step "obtaining the IP address" or telling me he avoided a bad connection, despite the fact that I have this option disabled.
    I tried turning everything market, I tried forgetting the network and reconnect. I tried to unplug my swr10 smartband I read another post suggested that it caused problems.
    Nothing works. It will be not just to connect to my WiFi at home.
    I read a post suggesting the firmware requires a downgrade but I'm not technical interest and I'm afraid to try because it is a new phone and I don't want to void the warranty.
    Someone at - it ideas?

    I think that I have solved it without going through the firmware downgrade. I went to advanced, disabled wifi wifi optimization. Then he returned, and then rebooted the phone. WiFi has been the connection perfectly for this, but as I do not understand the phones I can't offer an explanation as to why! It has been working well for 3 days now. I'll keep it under control, but it is worth a try for someone else in the same situation. I also have a colleague with a z1 which must have WiFi optimization disabled permanently to run WiFi, once again, don't know why but yet once worth a try.

  • Problem of PSG - Samsung Galaxy phone does not connect on windows 7 pc

    Problem of PSG - Samsung Galaxy phone does not connect on windows 7 pc

    I have two identical, the Samsung Galaxy phones, it connects to the pc to transfer files either does not connect despite the many possible corrections, I've read online by train.

    The phone tries to connect but is a problem of the PSG, while it is plugged said to install the driver, then momentarily, it says ready to use and then goes back to install driver again, it done a few times and then says failed.

    I tried to reset the phone to factory settings, reinstall the driver etc etc but nothing I tried works.

    I've read other posts of similar questions and have created a mtltrace.etl file, but I don't know where or how to download for investigation.

    Any help appreciated

    Hello Rob,

    Thank you for the update on the issue.

    I suggest you to uninstall all the drivers, that is Samsung as well as Bluetooth.

    Then, restart the computer and plug all phones Samsung three each so install the drivers and software from Samsung kies from the link below:

    http://www.Samsung.com/UK/support/model/gt-S6810PWNBTU

    After installing everything that the Samsung and then restart the computer and then plug the adapter Bluetooth (driver installation) and check if the problem persists.

    Thank you.

  • Bluetooth does not connect to the phone Moto G

    Bluetooth not connect to the phone of MotoGP

    How can I get there?

    Original title: bluetooth does not connect

    Hello

    Please contact Microsoft Community.

    I understand that you are unable to connect to the Bluetooth.

    I will definitely help you with this.

    1. Do you receive an error message when connecting?
    2. Are you computer connection to phone with Bluetooth or other device?

    I suggest you go through the below methods:

    Method 1: Run the hardware troubleshooter, and check if the Bluetooth works.

    Open the troubleshooter of material and devices by hitting on any fly in the right edge of the screen, quilting search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), recording equipment and devices in the search box, type by clicking on settings and then by typing or clicking on find and fix problems with the devices. You may be prompted for an administrator password or to confirm your choice.

    Method 2: activate Bluetooth Support Service.

    Follow these steps and check if the Bluetooth support Service is started.

    (a) press the Windows key + R, type services.msc and press ENTER.

    (b) make a right click on the service named Bluetooth Support Service.

    (c) check if it is started, otherwise click Start.

    Download and install the latest Bluetooth drivers on the manufacturer's Web site.

    Method 3: To add a Bluetooth device, see the following steps:

    Once you have verified that a Bluetooth adapter is installed on your computer and the device that you want to connect with can be discovered, you can add more than compatible Bluetooth devices to your computer. Here's how:

    1. press the Windows key, it will appear on the start screen, tap Add a device, click settings, click Add a Bluetooth device

    2. click on the compatible Bluetooth device, you want to add to your computer, and then click Next. If you do not see the device you want to add, make sure that the device is turned on and discoverable. If you turned right on the device, it may take Windows several seconds to detect.

    Windows might ask you to enter a pairing code (sometimes called a PIN or pass). Most Bluetooth enabled devices had to be paired with your computer before that they can exchange information between them. To do this, they must exchange protected pairing codes. This means that only wireless devices, you authorize can connect with your computer.

    See also the link below:

    https://support.Microsoft.com/en-us/help/15290/Windows-connect-Bluetooth-device

    I hope this helps. Please post back with the State of the question and we will be happy to help you further.

  • I have not done an iTunes sync in almost a year, and since that time have installed Windows 10. iTunes now does not connect with the iPad. Any suggestions?

    I have not performed a synchronization of the iPad to iTunes in almost a year. Since that time PC now works Windows 10, iTunes does not connect with the iPad or the iPhone 6.  Any suggestions?

    Thank you

    To work with iOS 9.2, you must update iTunes to 12.4 v.

  • I'm locked out of my ipod5 that I have not used for a long time, it is not connected to the Internet or iTunes is anyway can I unlock?

    I'm locked out of my ipod5 that I have not used for a long time, it is not connected to the Internet or iTunes is anyway can I unlock? In my opinion, it works on IOS8. Because I have not used in a long time, it has reset and does not connect to the wifi until I unlock, and I forgot the password to unlock it. I tried to clear up my iPhone but it requires Internet and iPod can not connect to Internet ithe, I also tried to restore the 'home' button and the lock button while connected to iTunes on my computer and that did not work either... Please let me know if I haven't tried something or have missed something.

    Thank you

    You have to follow the instructions for the erasure or use recovery mode in iTunes again. . You do not specify what happened when you tried to follow these instructions, or instructions for iTunes, which you tried to follow, but you will be able to exit the mode disabled via iTunes if you do not have Wifi:

    If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

    See you soon,.

    GB

Maybe you are looking for

  • Messages receive do not all messages

    Last week, text messages I receive are not appearing in Messages on my iMac running el capitan.  It seems that my iMac will not show messages from others using iOS because all of the texts have the blue background.  My iPhone 6 and Apple Watch will s

  • Satellite A200 need reduce graphics display on/off

    Hello When my laptop stop working and after some time a blue screen appears and says "beginning dump of physical memory.What it means? Then, I saw a suggestion, I think he should reduse or try to disable graphics showing or hiding windows. I'm not su

  • Is there a method to delete a worksheet by using the report generation tools.

    Hello I have an excel report, every time when I opened this report a worksheet is added to the report. Is it possible to remove worksheetm rather a spreadsheet. Thanks in advance,

  • E4200v2 ERROR_GET_APPLET_LIST

    Try the journal ot in today on the site of Smart Wi - Fi, I get the following error Unexpected error ERROR_GET_APPLET_LIST We encountered an unexpected error. If the problem persists, please visit our Technical Support site.

  • Illustrator CC - 'less back' removes the odd parts?

    Hello.I'm on Illustrator CC. A noob admitted. I "placed" a picture, goes back and developed it. This is the base layer (Layer 1, unlocked).On top, I've grouped 3 other images copied from another file, upgraded the contours of the race, but no fill.Ul