I have a 150 GB hard drive, but only 30 GB is on C: and 120 GB is on D. How to access free space because I'm running out of space on C

Similar Questions

• I have iPhotos on external hard drive, but can not read on my Yosemite

  My old mac is 2008 updated to lion. All my photos are on iPhoto and I was saving to external hard drive. My new computer which has the Photo can not read the photos. Is it possible without downloading to my computer.  My computer's OS X El Capitan 21.5 inch end of 2015. 10.11.3 worm. Processor 2.8 GHz intel core i5 8 GB 1867 MHZ DDR3

  What format is the external hard drive?

• two connected hard drives but only see a

  I have a USB splitter attached to my airport extreme, he sees a hard drive that I use for time machine, but he did not see the other. What can I do to access the 2nd hard drive?

  By the term "Dispatcher USB", I guess you're saying that you have a USB powered... hub that would be correct?

  If Yes, what is the number of brand and model of your USB hub?

  The drive that you currently can not 'see '... How this drive is formatted?

• Import from SD card does not store the files on hard drive, but only references to SD card after import.

  Hi - for some reason, files of my card SD imported into lightroom, but referencing only the SD itself card and as files within the usual on my macintosh HD library, of course, when I eject the SD of my iMac, lightroom do not know where the files are more. I tried to delete LR and re-import but the same thing happened. I also saved the DCIM folder on desktop and tried to import from there, but again, it is important files directly to my address in LR, which means that I have to keep my SD card. I use LR for a while and this is the first time that this has happened. I imported the files to another SD card later and everything worked as it should. I really want to make sure that my original files are where they should be on the hard disk and in LR, so I can safely eject my card and not to lose my files. Can someone tell me how to go about this please?

  When you perform the import, you must select the COPY option, and under the Destination on the side right, you must select a location on one of your hard drives.

• I want to be the format of my hard drive, but have a backup copy of the information of Firefox and passwords and bookmarks so retrieved after formatThank you

  I want to format my hard drive, but have a backup copy of the Firefox information and passwords and bookmarks so recovered after format
  Thank you

  To save bookmarks, see restore bookmarks from a backup or move them to another computer

  If you want to save passwords, you must use an extension like password exporter. It is located at https://addons.mozilla.org/en-US/firefox/addon/2848/ .

• installed my windows 7 Home Premium on a new hard drive, but it says my key is invalid. I bought this copy of the microsoft store and have retained the email with the key.

  installed my windows 7 Home Premium on a new hard drive, but it says my key is invalid. I bought this copy of the microsoft store and have retained the email with the key.

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  What is an upgrade?

  If so, you must install and activate a qualifying operating system before you perform the upgrade.

  For which version and edition of Windows the computer is allowed according to the COA sticker on the case?

• I have added an external hard drive to my XP but cannot access

  I have added an external hard drive to my XP but can't access it because I have no letter in my computer. not very conscious of their hope if someone can give a sense computer question and help thanks

  You have posted in a forum dedicated to provide feedback on the web site of Microsoft Answers.  It is unlikely that you will get the help you need here.  Instead, please ask to Windows XP 'Hardware and drivers' forum here: http://answers.microsoft.com/en-us/windows/forum/windows_xp-hardware.

• I had windows 7 x 64 enterprise installed on my HARD drive. now the company win 7 has expired, and I have to install win vista with sp1, but got a 0 x 80070017,.

  I can't format my HARD drive, but during a test partition, _X, who was only 26 MB in size of about was some sort created and vista tried to install instead of the main partition, partition (_: X) was created several times not by me, as I was using full disc for my installation. What's wrong?  fries, HARD drive, or win vista DVD fried, or win vista with sp1 wont install on a hard drive that had win 7 on it before formatting HDD and clean install that? Help? also, I got an error code 0 x 80070017.

  Hello

  1. When this error occurs during the installation?

  2. you have the Vista installation disc or the service pack disc?

  Method 1:

  I suggest you try the steps in the following article from Microsoft to install Windows Vista on your computer and check if it helps.

  Installation and reinstallation of Windows Vista:

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  For more information, see the following Microsoft article to know the system requirements to install Vista.

  http://Windows.Microsoft.com/en-us/Windows-Vista/products/system-requirements

  Method 2:

  I would also refer to a similar thread with a possible fix:

  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/6749eaaf-6a40-4ED3-b5e2-8cb134cd1e39

  Hope the information is useful.

• I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista

  I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista

  Hello

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• I have 200 GB of free space on my hard drive but I'm not able to make a new disk partition.

  I have 200 GB of free space on my hard drive but I'm not able to make a new disk partition. When I click on new simple volume in management records and steps of preforms a message (IT IS NOR ENOUGH SPACE ON THE DISK to COMPLETE THIS OPERATION.)   appears.

  Please HELPnot able to make a d

  Assuming that C: is the drive of victory that the size is too small, you need at least 100 GB for the drive to victory.

  (on this particular sys disk win uses 128 GB and with libraries located on a second disk, the disk win itself is 240 GB)

  You might care to use the home Version page free;

  http://www.partition-tool.com/ (EaseUS) because it has more options/capabilities than the tools management integrated disk.

  Have BTW you kept your Vista recovery disks and its key as if you need to reinstall from disc to upgrade to win7 that you will first install Vista

• I changed from a PC to a MAC and have reformatted my external hard drive with my photos.  Originally LR pointing the reader as reader J but now I can not use a letter.  Y at - it anyway to solve this problem.  My catalogue works fine?

  I changed from a PC to a MAC and have reformatted my external hard drive with my photos.  Originally LR pointing the reader as reader J but now I can not use a letter.  Y at - it anyway to solve this problem.  My catalogue works fine?

  In the library, go to the folders Panel, right-click on each folder of upper level and "updated to the folder location".

• Copy the files from the flash drive on the hard drive but I don't want to copy the files I already have.

  I have Windows XP.  I have a flash drive with many files that I have on my second hard drive.  I just it copies the files that I have on the hard drive and I don't want to have to sit and answer 'yes' or 'no' question about the replacement of files each time that it recognizes a file duplicate. How do I do that?

  When you see this double prompt or not, are there not a checkbox that says something like "Always do this for all files" or something in that sense?
   
  You can manually copy the files. Here is the CTRL key while you click the files you want and then just drag them to the location on the HARD drive.

• 750-103D want: I want to install a 3rd HARD drive but the system will not start

  Desktop motherboard has 5 heads SATA (of which 2 were used for the first DvD and HARD disk in the original Setup) and the box has 3 bays for HARD drive, but there is no additional power from the PSU cable.

  I installed a new SSD as my main and designated record the 1 TB of HARD drive that came with the desktop as my secondary school and office works just great.

  Now I tried to install an another 1.5 TB HARD drive for storage. I used a SATA power cable Y (1 male to 2 females) to extend the existing cable. However, to my great disappointment, the system is unable to start up. I guess that supply POWER 300 watts current is insufficient to start 3 disks to a single supply with extension cable.

  Issues related to the:

  1] sells HP a 500-watt power supply with power cable for SATA 3 HARD drive?

  [2] is a compatible power supply on the market (ie. not HP) who can stand in 750-103D envy? Brand/model and how much?

  Thank you.

  Hello

  Probably, you have misunderstood my response.  Unplug the original HD boot drive.

  Your question is not the power supply lack of insufficient power.  I have observed remains with HP computers with a power supply that would support three HDs off a 300 Watt SATA power cable voltage.

  Perhaps the third HD is formatted incorrectly or is defective.  The other possibility is that your SATA Y cable connection is defective.  You also need good 5V and 12V.  In addition, if you have made any hardware changes to your PC you have not indicated, then it is possible that you may need a bigger power supply.

• I hear the ticking in the hard drive, but diagnostic tool (S.M.A.R.T) says his health.

  Pavilion p6010in Desktop for 3 years using (product number: NC875AA #ACJ), for a few months, I hear the ticking in my hard drive, I suspect that it is its failure of hard drive, but my diagnostic tool (SMART) explains his good health.

  Sound indicates a problem. I also use Ubuntu 12.04 with vista (even ubuntu says that the disc is in good health).

  I'm confused why the sound is similar to a click of death as seen in the link (my hard drive Seagate Barracuda 500 GB) below

  Seagate desktop with heads of default drive get stolen, then clicking sound.

  Please tell me what I should do now. I also Plan to upgrade to Windows 8 (I won't use Ubuntu anymore).

  I suggest you replace your hard drive before the upgrade to avoid all these problems. The new hard drive should be the same size or larger that one you have for the recovery discs to work properly. Install Windows 8 on the new hard drive.
  
  Once Windows 8 has been installed successfully make a new set of recovery disc for Windows 8 so that if everything fails, you can the recovery disc restores on Windows 8.

• Computer of memory on my hard drive - I already have the basics. How to get free space.

  Original title: I'm out of memory on my hard drive but I have minimum programs, photo and music on it. What else can I remove it?

  It seems that a lot of programs listed under Add/Remove are installations of service packs or updates. I already deleted all files and unwanted programs, ran defragmentd and my drive disk cleanup. What should I do to find a free space?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/i-have-many-security-and-Windows-updates-that-are/4a8219af-fc4b-407E-b1ea-af647d20e3ed

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/i-have-many-security-updates-that-are-now-taking/aa313c3f-D724-48E5-A497-29c67da2c243

  Space and memory are two different things.

  UTC/GMT is 21:07 Friday, August 3, 2012