I have a 610-1280qd Touchsmart when he goes to sleep night powers and must be reconnected

Similar Questions

• Whenever I have shut down my computer, I am disconnected from Windows Live Messanger and must manually connect at the beginning of my next session.

  Question asked by Neil Clark (me)
   
  I selected the option Connect automatically in Windows Live Messenger when I turn my computer. Whenever I have shut down my computer, I am disconnected from Windows Live Messanger and must manually connect at the beginning of my next session.

   

  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
   
  Sunday, August 22, 2010 01:54

   

  Windows Live K - Ann C response.

   

  Hi Neil,

  This error occurs usually when a record has been changed when an update has been performed on your computer. To resolve this issue, follow these steps:

  
  Important: before you edit the registry, make sure to save, to understand how to restore the registry if a problem occurs.

  Warning: If you use the correct registry editor, you may cause serious problems may require you to reinstall your operating system. Microsoft does not guarantee that you can solve problems that result from the use of the Publisher of the registry incorrectly. Use the registry edit at your own risk.

  
  BACKUP REGISTRY KEYS:

  1. click on Start, click on run

  2. type regedit and click Ok

  3. in the registry editor window, click desktop on the left side to make sure that you backup all the registry keys.

  4. click on file and click on export

  5. save the file on your desktop or in your desired location. It will have the default extension (* .reg) to back up the registry.

  6. If you want to restore a file to the registry, in the Registry Editor window, click file and click Import

  7. navigate to the location and find the name of the file with the .reg extension and click Open.

  Note: you will be prompted that importation has been properly registered in the register.

  
  TROUBLESHOOTING STEPS:

  1. open the registry editor by clicking on Start, then run. Type regedit and then click OK.

  2 open the user Shell Folders folder. To do this, click on the + sign of each of the products listed below.

  a. click on the [] sign + next to HKEY_CURRENT_USER

  b. scroll and click on the [] sign + next to Software

  c. scroll down and click on the [+] sign next to Microsoft

  d. scroll down and click on the [+] sign next to Windows

  e. scroll down and click on the [+] sign next to CurrentVersion

  f. scroll and click on the [] sign + next to the Explorer

  3. click on the User Shell Folders. A list of entries appears on the right side. Double-click AppData.

  4. the value data, type the following entry, and then click OK: %USERPROFILE%\Application Data

  5. close the Windows Registry Editor and restart your computer.

  Thank you

  K Ann C.

   

  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

   
  Thursday, August 26, 2010 09:27

   

  Response from Neil Clark

   

  Hi K - Ann,

  Thank you for the above information.

  I followed you instruction to back up the registry keys, but when I followed step number 7. Navigate to the location and look for the name of the file with the .reg extension and click Open, the message of answers that I received from the registry editor has been as follows: -.

  Impossible to import C:\Documents and Settings\Compaq_Owner\My Documents\My Backup\Backup260910.reg of register: not all data was successfully written to the registry.  Some keys are open by the system or my other processes.
  
  So I closed my computer and restarted. I then followed your instructions again (this time save the backup of the registry to a member in the same library, called "Backup260910bkup"

  Yet once, when I followed the number of the step 7. Navigate to the location and look for the name of the file with the .reg extension and click Open, the message of answers that I received from the registry editor has been as follows: -.

  Impossible to import C:\Documents and Settings\Compaq_Owner\My Documents\My Backup\Backup260910bkup.reg of register: not all data was successfully written to the registry.  Some keys are open by the system or my other processes.

  Can you tell me what I need to do to work around this problem of backup of the registry?

  I look forward to receiving your response.

  Thank you

  Neil Clark.

   
  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  Monday, August 30, 2010 22:19

   

  Response of Windows Live Mechell P.

  Posted by Neil Clark

   

  Impossible to import C:\Documents and Settings\Compaq_Owner\My Documents\My Backup\Backup260910bkup.reg of register: not all data was successfully written to the registry.  Some keys are open by the system or my other processes.

  For this error, you must contact the Support Windows via Microsoft answers Forum link below:
  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

  Thank you
  Mechell P.

  Hi NeilRClark,

  When a registry key is blocked from change, the user can also run a. Registry Registry REG entries to merge the registry keys, values or the value in the system registry data, with the following permission denied error message:

  Cannot import RegistrationEntries.reg. Not all data was successfully written to the registry. Some keys are open by the system or other processes.

  To solve this problem, the ownership and grant full control (read and write) permissions and rights on the protected system registry key.

  Check out this link to do the same thing:

  How to capture a file or a folder in Windows XP

  To take ownership of a file or folder

• My PS6520 wireless printer will not print when she goes to sleep, any idea? Thank you

  My PS6520 wireless printer will not print when she goes to sleep, any idea? Thank you

  Hi 464544,

  Welcome to the Forums of HP Support! I understand once that your HP Photosmart 6520 starts in mode "sleep" you cannot send a print job, it does not automatically standby upward.

  Please take a look here:

  The printer into standby mode after five minutes of inactivity to help reduce energy consumption. The sleep time can be changed from the control panel. The printer will wake up mode 'sleep' to print when a print job is sent to it.

  However, the auto power off feature must be disabled. Auto Power-Off turns off the printer completely, you must use the power button to turn the printer back on. You can change the setting Auto Power-Off from the control panel. configuration -Source

  Menu Configuration > other Menus > Eco > auto shut-off > off

  I hope this helps.

• I can cause a ticking a box to add 1 to a calculated field?  I have a field that summarizes the numbers entered in several previous fields and must be able to add '1' If a checkbox is enabled as well.

  I can cause a ticking a box to add 1 to a calculated field?  I have a field that summarizes the numbers entered in several previous fields and must be able to add '1' If a checkbox is enabled as well.

  My first sample: If all the checked Checkbox event.value wins 1

  My next sample: If one of the boxes is enabled event.value wins 1

  Event.Value =

  this.getField ("Check Box16") .isBoxChecked (0) |

  this.getField ("Check Box17") .isBoxChecked (0) |

  this.getField ("Check Box18") .isBoxChecked (0) |

  this.getField ("Check Box19") .isBoxChecked (0) |

  this.getField ("Check Box20") .isBoxChecked (0)

• Whenever I have shut down my computer I comnnection in bulk for my printers and having to reconnect again when I start-up

  I have two printers (HP G85 & Konica Minolta 2500W magicvolor) on a small business connected by ethernet network and other cable series. The network server is managed by Windows XP Pro V2002 SP3I and I have access to the network through one of the two laptops Toshiba Tecra to operate Windows Vista Business SP1. My problem only occurs on one of the laptops (the other works fine). The problem is not always consistent and often causes different symptoms.

  When starting the printer seems to be online and connected, however when I send a print to the system command accepts the order (or nothing at all), but the print window displays an error message after a few minutes. When I check the printer proerties sometimes I'm not able to display the port information at all. I have to cancel the print order, remove the printer from the network and 'Add printer' again. I send the print command and the printer now prints. Sometimes the print command works normally and sometimes, it takes a long time to print and the printer very very time consuming to complete the task from start to finish.

  Now, I have added the printer once again I lose the connection again when I shut down the computer and must go through the same drama when I start again. The problem is that with a single computer.

  grhilly,
  Thanks for posting on the Microsoft Answers community forums.
  Can you give us a little more information so that we can better help you?
  What is the exact error messages that you get when you try to print?
  You get the same error message if you try to print to the serial printer or an Ethernet?
  Have you tried uninstalling and reinstalling the printer drivers on the laptop which is having the issue?

  The answers to these questions will help us better help you solve this problem.

  In the meantime, here is an article that might help you to refine the question:
  http://windowshelp.Microsoft.com/Windows/en-us/help/3f04f06b-269F-4576-a6f7-ed17952d5e031033.mspx#ETDAC

  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• W510 doesn't wake up when she goes to sleep - Bit from Windows 7

  Hi all

  The Lenovo thinkpad w510 won't wake once she goes into sleep mode, I have to press the power button until it stops completely and restart completely, I tried different settings in the management of food etc. We have the same pissue on 3 different w510 with Windows 7 pro 64-bit

  Does anyone have a solution for this problem?

  Kind regards

  
  

• packs battery continues to charge iPhone 5 when he goes to sleep - that's my phone?

  I bought a second hand iPhone 5, knowing that he didn't hold a long charge (I was told 4 hours, but between the delivery of the money and go home 45 minutes, she went from 100% of deaths).  No problem, I'll buy a battery pack.

  Got a Farbe Technik, a high-end Apple approved Canadian brand, and it would only charge the phone if the phone is turned on.  I contacted Farbe Technik, and they sent a replacement, no questions asked.  Just jumped on and same problem.   Then they battery won't make a functional phone for me.

  If I had two defective battery packs, or is it something wrong with the phone, causing the problem?

  Thank you!

  If the problem does not occur when you use a USB power adapter plugged into the wall, then the problem is the battery. If this happens using a power adapter USB with output of at least 1 amp (5 watts) then the problem is in the phone.

• When to use the cursor for loop and the cursor (open, fetch, close)

  Hello world
  I have a small doubt about when to use the cursor for loop and when to use the cursor for loop and the cursor (open, fetch, close).
  Well, I'm not the difference between implicit and explicit cursor. So please tell me how I got to know, what to use and when?
  
  
  
  
  Kind regards
  BS2012
  
  Published by: BS2012 on January 29, 2013 12:15

  All SQLs are analyzed, stored and executed as cursors. Thus, you will always use a cursor.

  The problem is that languages, such as PL/SQL, provide different interfaces to interact with the SQL cursor. As the ref, the slider interface, the interface DBMS_SQL slider interface and so on.

  Each of these interfaces offers different features. For example, using the interface DBMS_SQL allows binding dynamics and dynamic recovery. The Ref Cursor interface allows your code PL/SQL pass a handle to a reference pointing to the SQL cursor, to an external client. Etc.

  The fundamental reason for the use of an explicit cursor interface is mainly that you own and manage bulk made extraction output provided by PL/SQL cursor.

  With a cursor FOR , the motor loop of PL/SQL optimize the loop by extracting block a 100 lines both. However, you cannot access this collection in bulk directly inside the loop.

  With an explicit cursor interface, you specify the size of the extraction in bulk via the clause LIMIT , and you set the variable of collection to use. This allows you to use the collection directly variable inside the loop.

  However, the need to do - code manually in bulk collection - rarely occur in the daily programs in PL/SQL. A line of treatment is both slow and not well fits. And even if your bulk code collects lines, these lines must still be processed one at a time in your code. It is much more efficient and scalable rather write SQL code, and make the engine SQL the line of treatment for you.

• 9F Windows blue screen when you go to sleep

  Having a problem with a computer crash every night when he goes to sleep. Here's the log and I pulled the DMP stuff. Any help would be appreciated. Thank you!

  Signature of the problem

  Event problem name: BlueScreen

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 1033

  More information about the problem

  BCCode: 9F

  BCP1: 000000000000003

  BCP2: FFFFFA800435CA10

  BCP3: FFFFFA800A522550

  BCP4: FFFFFA800A522550

  OS VERSION: 6_1_7601

  SERVICE PACK: 1_0

  PRODUCT 256_1

  Files helping to describe the problem:

  C:\Windows\Minidump\021214-14944-01.dmp

  C:\Users\---\AppData\Local\Temp\WER-67626-0.SysData.XML

  «"" specific .dmp mentioned zipped file:»»»

  https://ascentpathpartner-my.sharepoint.com/personal/kevin_costello_ascentpathinc_com/_layouts/15/guestaccess.aspx?guestaccesstoken=r%2bZpYTx6b%2bR3q70LaeXzG1WZ%2bBubOlvBRxvlxtCtQI0%3d&docid=0d7cee6f3e05840439d3600d793bcf35f

  Minidump folder zipped

  https://ascentpathpartner-my.sharepoint.com/personal/kevin_costello_ascentpathinc_com/_layouts/15/guestaccess.aspx?guestaccesstoken=Hv9XLWZbgifWIz7sOMEFCabnl8HM%2fVXqJgZDGQlCaVw%3d&docid=0b51fabfe9d9c42df919cd4c96d6bc6f5

  Hello

  Kevin, what is happening here, as I mentioned is Kaspersky is at the origin of the conflict that leads to memory corruption and error checking that we see here is the original. We did our utmost here, which is to identify the problem of accidents. Now that you know what is the cause, your next step should be to contact Kaspersky and work with them on the provision of a solution for you.

  If you are comfortable and feel that your problem has been resolved, I recommend you to mark all messages from my friends who responded to your question as answered so this thread is no longer present as requiring a response.

  Kind regards

  Patrick

• How do you send netflix through my touchsmart 610-1280qd to my TV

  I can't understand how to stream netflix to my TV on my Touchsmart 610-1280qd.  I have no problem streaming from my Envy laptop but it is very hot (even with an external fan) and noise requires speakers.  I had a second monitor attached to the 610-1280qd, but he said to duplicate postings.  It does not work.  Disconnected secondary monitor completely - that didn't work.  I also had a failure of installing Chromecast on the 610. Is it possible to stream with a touch screen to a TV?

  Hooray, solved.  I had already set up a second monitor (using the hp video referenced in several responses) with a StarTech USB to DVI video adapter for the second monitor 2310 m older HP.  When I went to pick him up for the 'video USB connector"referenced elsewhere in the forum, I came across a dollar 20.00 adapter DVI to HDMI by GE (Walmart).

  By connecting this piece to the USB adapter to DVI video, it worked for access to television.  I have to unplug the adaptor DVI monitor cable and replace it with the DVI-HDMI adapter and HDMI cable (less than a minute), which allows me to watch netflix on my TV movies.  I will say that I would not have thought it with the forum, the news of cat info and visually see the possibility that the small DVI to HDMI adapter would work. Good luck to those who always try to watch television through their touchscreen.

  It seems to me that when there are 1100 more we try to see how to do this that HP would create a specific page or a video for us help to know how to "connect your touch screen to your TV.  I spent 3-4 hours trying to find information to solve a problem that shouldn't exist in the first instance. I don't understand why there is no video output on touch screens.

• TouchSmart 610-1280qd crashes

  TouchSmart 610-1280qd; Windows 7 Pro; PC x 64; Intel Core i7-2600cpu@340GHz; connected to the second monitor (HP2711x) via a video adapter - Startech.com (provided by HP):

  Crashes (buzz then blue screen) when I play movies, videos.

  All solutions?

  Hi Casiebert,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Touchsmart 610-1280qd and get a buzz then a blue screen on your HP 2711 x 27-inch diagonal LED display. What happens if you unplug the external monitor and run the same video or a movie?

  Please let me know.

  Thank you.

• I have a 610 touchsmart. Is LightScribe is enabled.

  I have a 610 touchsmart. Is LightScribe is enabled. I ran LightScribe diagnostic that says no LightScribe configuration problems found.  But no detacted media. The drive is hp cddvdw ts-t633p hib) 195. I have tried verbatim CD - R, light scibe. Any help would be appreciated. Thank you

  This is the original factory specifications for your desktop HP TouchSmart 610-1100uk. According the specs, I don't see a reference to this model supports LightScribe. In addition, it is not a driver or software for LightScribe registered to the drivers of HP 610-1100uk TouchSmart desktop PC page. While it is not clear evidence that your model does not support LightScribe, simply said that it most likely does not.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• How ports usb 2.0 & 3.0 on the 610-1280qd?

  How many ports USB 2.0 & 3.0 are there on the HP 610-1280qd?

  Hello

  Of its features, the machine (CTO) can have:

  Must select one of the following options:

  • 6-in-1 card reader multimedia + 2 USB 2.0 + 2 USB 3.0 (with TV tuner on the rear i/o Panel
  • 6-in-1 card reader multimedia + 4 USB 2.0 ports, audio Beats (with TV tuner on the rear panel I/O)

  USB 3.0 port has 'SS' before the USB symbol.

  Kind regards.

• do you need to always have your iPhone with you when you wear the watch?

  do you need to always have your iPhone with you when you wear the watch?

  Answer brief No.. The watch can do many things with the phone. If you have the 2nit series has built in GPS so it can follow, see this.

  How to use your Apple Watch without your iPhone in the vicinity - Apple Support

• We went to MacOS Sierra of El Capitan and now have to log in twice, when we start the computer.

  We have upgraded to Mac OS Sierra of El Capitan, and now we have to log in twice, when we start the computer.

  How fix us this?

  Thank you...

  All the best...

  God bless...

  If you have activated the preferences-> Security-> FileVault system, then you must enter your password initially so that device drivers can decrypt your encrypted drive.  Once the system is running, you must then log into your account.

  They are really 2 separate activities that happen just to use the same password.