I have a black screen, but can use windows on the bottom bar.

Similar Questions

• Satellite - black screen and can't restart with the recovery disk

  I have a black screen and can not restart with the restore disc but it seems to be.

  I find this odd, I can't ask Toshiba direct on my problem, but I have to wait for one nature in the heart of my problem or give me a helping hand

  Hey,.

  This means that you can see anything on the screen of the laptop or only if you try to start with the recovery disk?
  You can start Windows or access the BIOS?
  You must post a few more details, otherwise we can t help you :(

  Furthermore, Toshiba is not your first contact, you should ask an authorized service provider. They can help you too! :)

• Says I don't have permission by trying to access a secure site, but can using windows Explorer

  While trying to access a secure site when I enter the password, I get (you are not allowed to message).

  I have reset my password. Without success. Contacted directly the password manager and reset the site with their help. Without success although they may open the site with my password. The site manager told me to contact you guys because there with Mozzilla Firefox.

  Tried to use Windows Internet Explorer without any problem.

  See also:

  • https://support.Mozilla.org/KB/fix-login-issues-on-websites-require-passwords

• I have a black screen when turn my Windows Vista.

  Original title: BRO. THANKS AMEN

  I have another computer running Windows Vista, most of the time that it remains lit.  However; When put on now, I get a black screen with a start-up noise struggling, but nothing happens. I tried in vain to keep clickii key ng F11 to do a system restore, but still nothing is happening.

  I have another computer running Windows Vista, most of the time that it remains lit.  However; When put on now, I get a black screen with a start-up noise struggling, but nothing happens. I tried in vain to keep clicking on the F11 key to do a system restore, but still nothing happens.

  Hello

  When you try to start your computer do you have a Splash Screen (manufacturer or Logo MotherBoard, Acer, Dell, etc.) and a single "beep", what is normal?

  I'm checking to see if your problem is; in the motherboard or hard drive.

  Follow this information:

  Go to the website of your computer manufacturer > search your computer specifications > know brand of hard drive > access the Hard Drive manufacturer's Web site > find and download hard drive Diagnostic software and make a record of start of it on the computer that you use to get here, following their instructions > test your hard drive to see if it has failed.

  And see if the hard drive tools help you.

  "7 free disk hard test Programs.

  http://pcsupport.about.com/od/toolsofthetrade/TP/tophddiag.htm

  ____________________________

  And let us know your brand of computer that I can then know you which key you should lobby to perform a recovery to factory settings if the hardware is OK.

  See you soon.

• I have a black screen when I install Windows 8 on Multiboot with Windows 7?

  Hello

  I tried, again and again, to install Windows 8 on a custom installation, so that I could Multiboot Windows 7 and 8 together.
  I already have a genuine Windows 7 Ultimate installed, and I purchased Windows 8 PRO download site Australian Microsoft windows, the operating system on my computer (using software that I installed from the windows Web site once I bought it), and burned the Windows 8 PRO ISO on a DVD.
  I did a forum on how to use disk management to create a partition for Windows 8, it's not the problem.
  Once I run the Windows 8 installation DVD in the Boot menu, I entered my product key and the installation continues its way and the computer restarts like twice, but the third restart it comes up with a black screen! I waited 15 minutes, but still nothing around. I also tried different ways to install Windows 8 on a multi boot (as I don't want to lose Windows 7 and all my files - I NEED multiboot), but she always ends up with a black screen with no end!
  Someone please help me, as now Im left without windows!
  Thank you
  -RJ

  Hey

  I found a solution for the problem of black screen!

  Thank you to all the guys who have tried to help me solve this problem. I really appreciate it!

  There seemed to be a problem with my monitor, or my graphics card drivers and windows installation 8.

  The solution has been found on the HP forums, at this link:

  http://h30434.www3.HP.com/T5/notebook-display-and-video-e-g-Windows-8/Installing-Windows-8-upgrade-black-screen-after-Windows-8/TD-p/1974699

  And thanks to cSalman on this forum, he wrote:

  WINDOWS INSTALLATION PROCESS 8 EVEN AFTER THE VACUUM OF THE COMPUTER SCREEN:

  1. In MSCONFIG, uncheck "Load Startup items". Disable everything in the 'Services' tab and then restart the computer.
  2. Install windows 8. After 1 restart, the screen will become empty.
  • Connect another monitor/TV with your laptop / desktop.
  • Your windows process 8 installation display on 2nd monitor/TV, but will remain empty in the 1st monitor.
  • Complete all the installation process of windows 8.
  • Once done, change the settings of the monitor to windows. OR simply close the lid of the laptop and open back

  MY EXPERIENCE:

  • In my case, what happened, I was installing Windows 8 to my Toshiba laptop.
  • I did 2nd TV monitor and installation process begin to show in it, while the laptop screen remains black all the time.
  • After complete installation, my laptop screen stays black and would not be ' t difficulty even with the help of response from Microsoft Support.
  • So they rise to more expert and I suppose me to receive the call from them the next day.
  • Same day that I started to watch a movie with my TV monitor, then I thought allows me to close the lid of the laptop.
  • As I closed the lid of the laptop, TV erased, so I opened the lid laptop back again.
  • As I opened the rear lid, windows 8 has detected the laptop screen and started working

  ------------------------

  And Voila! After disabling all services and startup items in windows 7, then using my TV as my monitor, I was able to complete the installation of Windows 8 and now I'm happy!

  Thanks again,

  RJ

• Windows 7 home first OA: start of the laptop but I have a black screen, but the caps lock button led on and outside

  Dear anyone!

  I need a help of deperate. I have a Windows 7 first OA type HP laptop at home that he is the specification that I have.

  I would write what happened. I always before I close my laptop I chose the tab.and of sleep when I open again is to start automatically, but somethimes I do the Start button. So my problem started when I did my usual close choose the sleep tab and he's fine, leater but10 to 15 minutes, I forgot something and I wanted up, after the start I heard my lap top speed and good early but the screen is pitch black, no company logo and nothing! I've noticed that only a seeing of CAPS LOCK button is on and outside. My question is what is the problem, I hope that no Virus! Or I had to close something? How can I start my lap top once again? Help, please!

  sincerely

  Zoltan

  Try a hard reset:

  http://support.HP.com/us-en/document/c01684768

• Compac cq62: downloaded windows 10. Now I have a black screen and the caps button continues to blink. All the answers.

  Downloaded Windows 10. 1 week later, I have a black screen. When I turn on the power to all I get is a flashing caps button one am not able to connect. Ilha a Compaq cq62 model.

  I have seen this reported, and the response is not good, sorry:

  "Problems of upgrading Windows 10: black screen after update (new).
  Some users taking advantage of the Windows 10 upgrade are the conclusion that once the completed upgrade their device just gives them a black screen and does not start.
  Microsoft is still working on a fix for this, but it's not a way to avoid it now. Worse, it seems that the problem that happens on multiple PC configurations. For now, we can only suggest using the utilities provided with your backup device and create some external media backup before starting the upgrade in case that happens. If this happens and you live near a Microsoft Store, make an appointment with them to have your device looking if you experience the problem. Some reports (such as those of our comments) indicate that disabling anti-virus programs before performing the upgrade prevents this issue. »

  http://www.GottaBeMobile.com/2015/07/30/7-Windows-10-upgrade-problems-how-to-fix-them/

• HP 500-046: 6 beeps at startup, can't access boot options (black screen) but then Windows loads ok

  After making a system image backup I wanted to test the recovery disc. To start from the cd tried to change bios to disable secure boot and enable legacy startup.  Could not get the pc to boot once so reset cmos by shorting the pins on the mboard.  Now to start always get 6 beeps and black screen, but after a minute, windows login screen lights up and it works fine.  Unable to access the bios Setup screen any key used at startup.  6 beeps indicates a video card problem, but no material error in device mgr points.  Want to update to Win 10, but unsure about do to address this problem starting.  Appreciate any help.

  @JohnN59,

  Thanks for the information to know.

  You can try the DVI port on the motherboard

  I/o Ports and internal connectors

  Rear i/o ports

  Figure: IO back panel

  

  1. USB 2.0: 2

  2. Output S/PDIF port optical

  3. VGA

  4. DVI - D

  5. LAN

  6. USB 2.0: 2

  7. USB 3.0: 2

  8. Audio: Port of central/subwoofer (yellow-orange)

  9. Audio: Rear Speaker Out port (black)

  10. Audio: Side Speaker Out port (gray)

  11. Audio: Line (light blue) port

  12. Audio: Output line port (lime)

  13. Audio: Microphone (Pink) Port

  If is not shows the start then try the Bios reset/recovery (windows + B key).

  Please keep me updated.

• Please I have iPhone 6 more stopped working all of a sudden shows apple logo then black screen I can solution?

  Please I have iPhone 6 more stopped working all of a sudden shows apple logo then black screen I can solution?

  Have you tried to restart the iPhone by pressing and maintaining the sleep/wake and home buttons?

• I have Acer Aspire 5735Z computer. Using Windows Media Player, I can watch a DVD, but have no sound.

  I have Acer Aspire 5735Z computer. Using Windows Media Player, I can watch a DVD, but have no sound. checked speakers that work well in other applications. IE I can download music from the internet.

  original title: can play a dvd. a picture but no sound

  Hello

  1 is this specific problem with a particular DVD playback?

  2 did you change on your computer before this problem?

  3 have you tried to play the DVD in another computer?

  4. What is the format of the video file?

  You can follow the suggestions and then check.

  Method 1

  a. open Windows Media Player.

  b. click on Tools.

  c. click on Options.

  d. click on devices.

  e. click on DVD and select Properties.

  f. ensure that Rip and playback are digital.

  Method 2

  You can download and install the latest codec of your favorite search engine.

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  Note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there.

  Method 3

  Another possible reason is your audio driver. If the problem persists, I suggest that you download the latest audio driver from the manufacturer's website and install.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  See also:

  Play an audio or video file

  http://Windows.Microsoft.com/en-us/Windows-Vista/play-an-audio-or-video-file

• I have a subscription (InDesign), but can not use it

  I have a subscription (InDesign), but can not use it

  Hello

  Please we write the error message so that we can help you. However, if you get error then follow it please stop Creative Cloud 2015 to return to the mode of trial and problem with Photoshop CC license to rename the hosts file if necessary.

  It will be useful.

  Kind regards

  Shelly

• I just bought a new laptop and have downloaded Lightroom 4.4. The font size is tiny and unreadable. I looked in preferences to see if the font size can be redefined to allow me to read the screen but can't see sort (except the m application

  I just bought a new laptop and have downloaded Lightroom 4.4. The font size is tiny and unreadable. I looked in preferences to see if the font size can be redefined to allow me to read the screen but can't see anything (except the magnification tool application) to read the screen.

  Any ideas?

  Hello

  You can change the font of the user interface of the options below.

  • On Windows, choose Edition > Preferences > Interface > font size:
  • On Mac OS, choose Lightroom > Preferences > Interface > font size:

  Change font size according to your need.

  You must close out of Lightroom and restart for the change to take effect.

  Let us know if this helps!

  Kind regards

  Vivet

• Envy 15 k005tx: laptop will not close properly... the va just black screen but the light is on and the fan also

  Laptop doesn't go out normally... va just black screen but the light is on and the fan is also on... so I have to stop it by pressing the power button... help plz...

  Hello

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  Try to use the following method to see if you can install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• I have the virus of file recovery, now I have a black screen with cursor blinking in the upper left corner.

  I have a Pavilion Notebook and recently caught the virus from file recovery.  I bought and ran the disc of Trend Micro Titanium Maximum Security.  Now, I get a black screen with a flashing cursor in the upper left corner of the screen.  All tests ran for memory, hard disk, etc. are OK.  Now I have a recovery disk, but have not backed up my files.  Any suggestions?

  Download your backed up files, then you can boot from your recovery disks to reinstall Windows.Several options to do so.

  Remove the hard drive and attach it to one > USB adapter . Plug it into another computer via usb port and copy files off the power.

  You can use > Ubuntu Live CD to boot from and backup files.

  OR ->Kaspersky CD has the ability to back up files.

• Start window manager: sometimes when I started my PC I have a black screen with the Windows boot manager at the top.

  Sometimes when I start my PC I have a black screen with the Windows boot manager at the top.  Although there are several options available, that nothing happens no matter what keys I hit and the only option is to shut down the computer and restart completely.  Sometimes the Boot Manager page turns and my office sometimes opens fine.  I've updated with everything Microsoft has Windows Vista and I still get this screen.  Anyone has any ideas.

  Do a startup repair and see if that fixes it:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner