I have a blank Memorex music CD - R stuck in my superdrive drive and it will not eject.  It does not seem to recognize that there is a disc inserted.  Any ideas?  Help - I'm a rookie.  :)

Similar Questions

• Why do my windows media sometimes not recognize that there is a disc in the drive when I am trying to burn music on the disc,

  Original title: windows media problems
  Why do my windows media sometimes not recognize that there is a disc in the drive when I am trying to burn music on the disc,

  If you restart WMP when this problem occurs, which helps?

  It seems that the AutoRun or AutoPlay got disabled on your system. Please try the instructions in the following article to reactivate these:

  http://support.Microsoft.com/kb/330135

• CS6 hearing does not seem to recognize that I have a 5.1 system and channel mapping. Any ideas?

  Hi there everyone. I'm trying to mix in 5.1 surround sound. I started a project and assign the 5.1, and I can edit everything very well. The problem is I can't track my results, because the hearing does not seem to recognize that I have a 5.1 (Logitech Z-5500 Digital 5.1) hooked through 6 direct channels. It is not recognize more than two channels. Anyone know what is happening?

  I have a laptop Alienware M17x-R4 running Win 8 Pro 64-bit. My sound card is a Creative Sound Blaster Recon3Di.

  Here's what my preferences are like.

  

  

  Unfortunately, your sound card is not a true 6-channel device. Like many of this PC low-cost sound systems, it is only capable of producing surround audio decoding of the already encoded sound sources. Ms. base drivers provided show only base two-channel stereo input and output for hearing.

  To be able to monitor true 5.1 surround channels, you will likely spend your audio interface to something with the release of six discrete channels.

• After you have installed the Windows updates, my computer does not recognize that there is a disc in the DVD - ROM thing

  I had this problem for weeks and only recently someone told me that it is perhaps for this reason.
  I tried several things to fix, and one of those who created an error where when I clicked on drive E in Windows Explorer, it looks like:

  E:\ application not found

  So, in the end, I wiped my computer and everything on it and rebooted again.

  IT TOOK FOUR HOURS.

  So, I've set up the computer as I did when I got it 2 years ago, and everything was fine. I could insert a disc, it reads that and I was able to install my game, no problems.

  Now, I have reset everything up, and there are more than 2000 updates to update installed. So I did.

  SO NOW, after all this, which took another TWO HOURS - he does not all disks again.

  I play the Sims 3 - fiercely - and so I tried to re - install all my expansion packs, but it does not now.

  I DON'T want to make that whole process again and install all my games before updating Windows, because I believe, even if I did that, once I've updated, I can't play the game, because my laptop does not recognize that the game disc is there.

  Help, please.

  I spent so much money on these games, and I love them! I don't have the money to buy a new computer.

  I have a Lenovo Ideapad

  Core i5 Intel

  https://support.Microsoft.com/en-AU/KB/314060/en-us

  Your CD-ROM or DVD drive is not recognized by Windows or other programs

  Discussion here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/Windows-8-DVD-RW-application-not-found/d68931e4-82f1-4D04-830d-49478ead5dd8

  Your AutoPlay doesn't work maybe not properly.

• I have windows me and I am trying to install windows xp on my drive and it will not be installed. How can I fix it?

  I have the disc for xp that I bought. It has been installed on this computer before. I had to restore the computer and now I can't reinstall xp from the disk.

  Hello

  ·         What is the exact error that you are experiencing when you try to install Windows XP on the system?

  ·         You have the full version of the Windows XP operating system or upgrade disk?

  ·         Are doing a clean installation of Windows XP or install an upgrade?

  Make sure that the XP CD is not damaged. If you have the upgrade disc you can not make a format installation. You can only switch to the older operating system to windows XP. I suggest you follow the steps mentioned in the article given below to install Windows XP on the system.

  How to install or upgrade to Windows XP

  http://support.Microsoft.com/kb/978307

• How can I make my default player for windows media player. I have upgraded to windows explorer 9, now quick time is the default and it will not read the attachments of wave?

  I downloaded explorer 9, now I can't read attachments in wave. a box opens and says open or save and I click Open and nothing happens. It seems that the system uses quicktime. I want Windows media player to be my default player. also, when I play a cd. He does not play in windows. Help, please.

  Hello, EdwardMLodzienski,

  Start > default of programs

  Click Set Program Access and Computer Defaults

  Click on the arrow in front of the custom (right) down

  Scroll down to choose a default media player

  Select Windows Media Player and click Ok

  Close the window

  You can also access two default programs in other ways.

  1. open Control Panel > default of programs

  2 tools > Internet Options > Programs tab

  Click on define programs and the same that you opened using the directions above will display

• I did an update yesterday and now my lightroom 6 and elements will not open. I get error messages / error 16 on lightroom and we have tried everything, including the creation of a new Director. Help!

  I did an update yesterday and now my lightroom 6 and elements will not open. I get error messages / error 16 on lightroom and we have tried everything, including the creation of a new Director. Help!

  In Adobe Creative Suite or Adobe Creative Cloud configuration error

• I have CS3 on my current computer and he's dying. I tried to download it on my new computer with the disc and it will not be activated. He says it's in my downloaded material, but it is not open! Help!

  I tried to download it on my new computer with the disc and it will not be activated. He says it's in my downloaded material, but it is not open! Help!

  Anna,

  It can be a challenge to install CS3 on a newer computer because it was designed for use on Microsoft Windows XP and Vista 32-bit operating systems.  You can check this link to check systems, it is designed to work:

  System requirements | CS3 product points.

  Guinot

• I have a Dell dimension running XP and IE8 will not respond

  I have a Dell Dimension 4500 XP pro and IE8 will not respond.
  When I click it it flashes up on top of the screen and disappears. To this effect, I can't watch the updates from Microsoft.

  Any ideas, anyone please?

  Delete.

  Hi guys,.
  It seems that my problem is solved.
  I removed a lot of the years of updates then run my drive setup and turned off and went to bed.
  When I turned on this morning I had to install updates. It was the only thing I was worried, and as this seems to be fixed, I am glad I use Firefox as my browser.

  I installed Speccy and he ran and it shows as running windows updates and it works correctly.

  Thanks a lot for all your help guys.

  Delete.

• Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  The duplicate thread information:

  Cannot connect Epson scanner/Nikon camera to printer!

  Hi Carolyn has Culp,

  
  Thanks for asking this question to Microsoft Community!
  
  I understand that your scanner and Nikon camera is not getting recognized in windows vista.

  He would be grateful if you could answer these questions. This will help us to a better way to get a resolution of the issue.
  1. have you made changes on the computer before this problem?
  2. What is the brand and model of the scanner?
  3. are you an error message or error code?
  4. is that your other USB devices work?
  I would suggest trying the following methods and check if it helps.

  Method 1:
  

  Try connecting to another USB port and check if the camera is detected or try to plug the camera on another computer.
  Method 2:
   
  Hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-us
  Method 3:
   
  Remove and reinstall all USB controllers.
  To remove and reinstall all USB controllers, follow these steps:
  (a) click Start, run, type sysdm.cpl in the Open box, and then click OK.
  (b) click on the Hardware tab.
  (c) click the Device Manager button.
  (d) expand Bus USB controllers.
  (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (f) restart the computer and reinstall the USB controllers.
  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.
  
  Method 4:
  To update the chipset drivers and check if it helps.
  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
  
  Reference:
  The problems of scanning: http://windows.microsoft.com/is-IS/windows-vista/Troubleshoot-scanning-problems

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work.

  I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work. I can get the led light will stop flashing when I open the door all the way, the machine detects the drive but do not read or close on its own, how can I get this disc surgery? Downloading updates, I installed a software disc, when I ejected the disc, the drive comes of is stopped. The computer still sees the drive, but will not read or even close on its own. I also had been using my computer in mode mute until I tried to increase the volume and now the computer tells me no playback device installed. Device Manager acknowledges the Harmon/Kardon soundsticks connected to it, but nothing does, how it works? The Control Panel also sees the soundsticks, but still when I try to move the volume the computer says there is no playback device installed.

  Hello

  1. do you get any error code or error message?

  2. what day you installed recently?

  It seems to be a problem with the hardware. I suggest you try to uninstall and reinstall the CD/DVD driver and check if it helps.

  Follow the steps to uninstall and re-install the drivers.

  a. click on start toreduce this includes this im and then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.

  Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  If the methods mentioned above did not help, then it would be best to contact the manufacturer of the computer/CD/DVD player.

  Hope the information is useful.

• I can't get adobe flash player to download for windows 7 Home premium. I have IE10 and it will not download and I have to use google I hate

  I tried many, many times to download adobe flash player in order to watch videos in facebook and play games and it will not download to IE10. I even had Dell involved and they tried everything they knew and that he could not. And so you know if I want to watch videos or play games, I have to use google chrome, I hate because I don't know anything about.  Help

  Hello

  For you help I would be grateful if you could answer the following questions:

  (1) what happens when you try to install Adobe Flash Player?

  (2) what happens when you try to play videos or play games using Facebook?

  (3) you get an error message / code?

  (4) outside of Facebook you are able to access other Internet sites without any problem?

  This could be due to the issue of complicity. I suggest you for the link and check if that helps;

  Method 1:

  Videos won't play or Web pages do not display correctly

  http://Windows.Microsoft.com/en-us/Internet-Explorer/videos-Don ' t work #ie = ie-10-win-7

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Method 2:

  Diagnosing basic problems with DirectX

  If you have problems getting a game or movie to play properly, the DirectX Diagnostic tool can help you locate the source. DirectX is a set of technologies used by many of the multimedia programs in Windows.

  http://Windows.Microsoft.com/en-in/Windows7/diagnosing-basic-problems-with-DirectX

  Method 3: I suggest you to install Microsoft Silverlight;

  Check out the link for download;

  Download Silverlight 5

  http://www.Microsoft.com/Silverlight/

  If you need help with Windows, please do not hesitate to post. We will be happy to help you.

• When I connect my computer to the Netgear router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access.

  I have both a laptop and a desktop computer and use a modem wired high-speed internet.  I bought a router "Netgear" 5 port so that I could have both online at the same time, but when I connect my computer to the router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access. It gets very tedious, please help...

  Original title: router does not work...

  Hello

  Welcome to the Microsoft community.

  I see that when you connect multiple computers using the Netgear router, it does not recognize the signal from the modem.

  You must contact the ISP to verify if they can help you with this question.

  In addition you can keep these items handy, it might help you.

  Set up a wireless router

  http://Windows.Microsoft.com/en-in/Windows7/set-up-a-wireless-router

  Install or remove a modem

  http://Windows.Microsoft.com/en-in/Windows7/install-or-remove-a-modem

  Change modem settings

  http://Windows.Microsoft.com/en-in/Windows7/change-modem-settings

  It will be useful.

  If you need help with Windows, let know us and we will be happy to help you.

• When I opened every day Premiere Pro it always says that I should check my account and I will not be able to use the work in a few days...  But I checked ve and my account is fine, all payments have been made. I m afraid that I have not access more in fe

  When I opened every day Premiere Pro it always says that I should check my account and I will not be able to use the work in a few days...  But I checked ve and my account is fine, all payments have been made. I m afraid I won't access more in a few days... What should I do to stay with my access?

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

• I tried to update and when I try to connect I get "you have been disconnected" and it will not let me go further.  What happens here?

  I tried to update and when I try to connect I get "you have been disconnected" and it will not let me go further.  What happens here?

  Hi Daryl

  Please follow: error "You have been disconnected" whenever I try to connect to the Cloud creative office application.

  See if that helps.

  Thank you

  Varun