I have a blue screen I can't start and I don't have a boot disk I can't start in safe or any type of mode

Similar Questions

• I downloaded and installed LR and PS and they throw very well but when I try to change an ARW raw file all I get is a blue screen. Can anyone help?

  I downloaded and installed LR and PS and they throw very well but when I try to change an ARW raw file all I get is a blue screen. Can anyone help?

  Go to Preferences, Performance tab and uncheck the 'use graphics processor '.

• Blue screen in XP from DRIVER_FAULT and memory_corruption errors

  Hi people.  Had fun looking for a 45 BSOD for my Compact Win - XP Pro.  I get failures over the last 5 months once a week, ranging from A to Z in bugcodes.  About 10 have been 0 x 50.  I removed Norton360, ran all the tests system twice and three companies ESOT, Norton and the scan MSFT no virus, run Norton Regcleaner and was clean. I have part of the SDK installed and tried to get LMV? to work.  I have included the minidump.text.  I post the most recent dump just after you remove norton.  Any help finding drivers with the"LMV?" would be useful.  I have all the minidumps. I have updated NVIDIA.  It happens at any time, on the most part, any application.  You get the idea, things are a little tense.  I have knowledge of the central computer and a few PC, but dump and stack not debug stuff.

  Thank you, Jerry

  DUMP**********************************************************************************************************************************
  Debug version of Microsoft Windows (R) 6.12.0002.633 X 86
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\WINDOWS\Minidump\Mini100911-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: srv * c:\mydir* http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows XP Kernel Version 2600 (Service Pack 3) MP (2 processors) free x 86 compatible
  Product: WinNt, suite: TerminalServer SingleUserTS
  By: 2600.xpsp_sp3_gdr.101209 - 1647
  Computer name:
  Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055d720
  The debugging session: 16:41:37.234 Sun 9 Oct 2011 (UTC - 07:00)
  System Uptime: 0 days 1:58:58.968
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ..........
  Loading user symbols
  Loading unloaded module list
  ............
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Error checking 1 a, {41284, a 164, 9001, ef4, c0883000}

  Probably caused by: memory_corruption (nt! MiLocateWsle + c1)

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  MEMORY_MANAGEMENT (1A)
  # All other values for parameter 1 must be examined individually.
  Arguments:
  Arg1: 00041284, A PTE or the work list is corrupted.
  Arg2: 164a 9001
  Arg3: 00000ef4
  Arg4: c0883000

  Debugging information:
  ------------------

  BUGCHECK_STR: 0x1a_41284

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: DRIVER_FAULT

  Nom_processus: explorer.exe

  LAST_CONTROL_TRANSFER: from 80523339 to 804f9f43

  STACK_TEXT:
  b1305be8 0000001 has 80523339 164a 9001 00041284 nt! KeBugCheckEx + 0x1b
  b1305c20 805b74f3 00000ef4 164 has 9000 c00b2548 nt! MiLocateWsle + 0xc1
  b1305c50 805b 8826 c00b2548 89ad45b0 00000000 nt! MiGetPageProtection + 0x13f
  b1305c88 805b90e5 00000000 89e8d608 89ad45b0 nt! MiQueryAddressState + 0xa4
  b1305d44 8054167c ffffffff 164a 1228 00000000 nt! NtQueryVirtualMemory + 0 x 477
  b1305d44 7c90e514 ffffffff 164a 1228 00000000 nt! KiFastCallEntry + 0xfc
  WARNING: Frame IP not in any known module. Sequence of images may be wrong.
  00000000 00000000 00000000 00000000 0x7c90e514 0238f78c

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  NT! MiLocateWsle + c1
  2b45f0 80523339 sub eax, dword ptr [ebp - 10 h]

  SYMBOL_STACK_INDEX: 1

  SYMBOL_NAME: nt! MiLocateWsle + c1

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: nt

  DEBUG_FLR_IMAGE_TIMESTAMP: 4d00d46f

  Nom_image: memory_corruption

  FAILURE_BUCKET_ID: 0x1a_41284_nt! MiLocateWsle + c1

  BUCKET_ID: 0x1a_41284_nt! MiLocateWsle + c1

  Follow-up: MachineOwner
  ---------

  Hello Elliottj,

  I would get the dumps uploaded to us.  If Please zip the contents of the c:\windows\minidump folder and place it in a public folder on http://skydrive.live.com.  Then post the link to us here.

  Let's start by cleaning the pagefile:

  1. Move the image to a different location on the hard drive.
  2. Move the paging file to another drive:
  3. Click Start.
  4. Right click on computer and select Properties.
  5. Click on Advanced system settings.
  6. Go to the Advanced tab if it is not already there.
  7. Click settings under performance.
  8. Click the Advanced tab.
  9. Click on 'change... '. »
  10. Uncheck "Automatically manage the size of pagefile for all readers."
  11. Select the drive where the pagefile is currently.
  12. Select "No paging file" below, and then click set.
  13. Select the drive where you move the file from the list of drives.
  14. Select the System managed size and then click set.
  15. Click OK and click OK again.
  16. Reset.
  17. I hope that we will now have a dumpster good blue screen.

  Once all this was done, we have a task:

  1. Click Start and type CMD
  2. Right click in the command line above and choose 'Run as administrator'.
  3. At the command prompt, type CHKDSK/r
  4. Let the full chkdsk.
  5. Close the command prompt.

  After that, we can look for another blue screen and I hope that this will give us a good image.

  Best regards

  Matthew_Ha

• Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.

  Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.

  Solution:

  1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.

  2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)

  3. type: BATCH spuninst.txt

  4. type: exit

  Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.

  -Tom Steele
  http://www.hawkandtom.com Tom Steele

• blue screen - PC keeps freezing upwards and then restarting

  Signature of the problem

  Files helping to describe the problem (some files may be is no longer available)

  Mini091810 - 02.dmp

  SysData. XML

  Version.txt

  Additional information about the problem

  BCCode: 1a

  BCP1: 0000000000005000

  I keep having this problem that my pc keeps freezing and then restart and makes me nuts blue screen appears dumping things then memory dump appears I can't crun my repair for any hope of reason that can help guys

  BCP2: FFFFF70001080010

  BCP3: 0000000001080498

  BCP4: 0000000000014C 48

  OS version: 6_0_6002

  Service Pack: 2_0

  Product: 768_1

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 2057

  Hello

  To see how to use BlueScreenView and MyEventViewer to troubleshoot the Bluescreens see the
  Methods indicate in this thread - top 3 answers.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  -------------------------------------------------------------

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Make sure that the vents are clear and that the
  the fans are working. Even if the temperature is OK assume no heat does not affect the video,.
  sound or other system functions that it these get hot. Try adding a small fan blowing in
  the vents as a test. (These are especially for a PC not a laptop.)

  Have you recently added any hardware? Have you updated any drivers just before this started?
  (Check control panel - updates of Windows to see if all drivers have been updated it on the)
  This started the time) likely guilty hand are video driver, other great drivers, memory, and
  antivirus/antispyware/security products could be at fault as well as reader questions.

  Use the troubleshooter below and refer to the following message to drivers and memory when
  you get these sections and then back to the resolution of the problems according to the needs.

  BCCode: 1a 0x0000001a<-- read="">
  http://www.faultwire.com/solutions-fatal_error/memory-management-0x0000001A-* 1041.html? order = votes

  -------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Start Windows xp will not start up - "error detected in antivirius" and told me to uninstall but I cant because I can not enter and I have no boot disk

  I start the pc, I need to start windows automatically, I don't what, whether it keeps restart and goes back to the windows splash screen, I have no boot disk for... that it runs xp it says there is a corruption in the antivirius and I half to remove in order to run the xp program but how do you do if I can not enter the pc...

  Hello

  ·          When the issue started?

  ·          Were there any changes made to your computer before this problem?

  Step 1: Start the computer in safe mode and check if you are able to uninstall.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Note: All programs do not give the option Uninstall in safe mode.

• Just my computer was restored now when I try to start it, it says that I need but in the disk boot. I don't have a boot disk. What should I do?

  I got a virus and I had fixed my computer, but now whenever I try to start my computer it tells me that there is no device boot-able and for me to insert a boot disk, then press a button on any. Well, I looked through all the manuals and CD that came with the computer and not for the life of me, I can find a boot disk. It's an old unit, I bought it in 2005 and I've been using Windows XP. Then what should I do? Is there anyway to get a boot disk? Can I just buy a new form of program store like windows vista or windows 7? Please keep in mind and don't forget when you give inform me that I am unable to do anything with the tower. No internet access, no desktop, nothing, so that the download is not an option. It just starts and then tells me to put in a boot disk. So what I do/how can I remedy this? Thanks for the help!

  Hi Becca_459,

   

  1. who is the manufacturer of your computer?

  2. What is the exact error you get when you start your computer?

  I suggest you to check the computer's BIOS settings to make sure that BIOS lists and recognizes the hard disk. See the computer documentation or contact the manufacturer to find out how to check the BIOS settings.

  After you verify that the computer's BIOS detects the hard disk, restart the computer, and then test to determine if the problem is resolved.

  If the problem is not resolved, or if the computer's BIOS cannot detect the hard disk, you may have problems with your hardware. Contact the manufacturer to find out how to solve this problem

  NOTE: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.

  If it does not, you will need to contact the manufacture of equipment.

• I get a blue screen, I can't seem to download anything it saids when I download something I expect and it saids Windows cannot access file I don't have the permission or path of specific device it saids

  I need a quick answer that please I can't download things like the fiesta or Halo. It shows keeps crashing and it will blue screen

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. what browser do you use?
  4. What is the accurate and complete error message on blue screen? If the system restarts immediately and then use disable automatic restart in case of system error.

  In response to the questions above could help us help you better.

  Steps to disable the automatic restart in case of system error:

  1. reboot the computer
  2 start typing the F8 key
  3. you get it anticipated the startup option window
  4. Select the disable automatic system failure reboot

• Blue screen with the error code and I have no disk recovery for HP Pavilion dv6-1260se

  I have a HP Pavilion dv6-1260se with operating system Vista factory installed. When you start the computer, I get a blue screen with this error message: STOP: c000021a {fatal system error}.

  The verification of a KnownDLL failed.  process ended unexpectedly with system

  a status of 0 x 0000221 (0x007fb9c0 0x00000000).

  The system has been shut down.

  I don't have a recovery disc for this computer.  I tried to order them, but they seem to not be available.  It is my daughter's computer.  She said she started having problems after you download Frost Wire (music sharing), and then she took.  We tried to go back to a bygone era and that did not help and then the blue screen with error message appeared. What should I do now?

  Hi Yprlvr

  It is not possible to download records from the web site, but you can order and they will send you the discs for you.  If you can get another option using F11 to work and get the restored system this way, you can make your own recovery disks (assuming that you have not already done on this PC, what a game can be made by PC).

  R

• Blue screen, but can the safe boot mode

  I get the following error

  

  He then gets to my home screen, just before going to my office and then I get the blue screen:

  I am able to boot in safe mode.  I also tried boot of the last good configuration but still knowing the blue screen.

  Please help because I am stuck how to proceed!

  Hello

  Check your cables to the disk hard (on both ends) - remove and replace - do

  not only it to be tight (of course all power first deleting).

  --------------------------------------------------------------------------------------------------------

  Resolution in Windows 7 stop errors (blue screen) - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  We can analyze the minidumps if make you it available from the OneDrive or other
  file -sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  --------------------------------------------------------------------------------------------------

  BCCode: 50 0 x 00000050

  References to Vista also apply to Windows 7.

  Have you recently added any hardware? Have you updated a driver just before
  These began? (Check control panel - updates of Windows to see if all drivers
  have been updated it there all the time, it started) main likely culprits are video
  pilot, other great drivers, memory and antivirus/antispyware/security products
  could be faulty as well as reader questions.

  Use the troubleshooter below and refer to the following message for pilots and
  memory when you get these sections and then return of the disease.
  game needed.

  BCCode: 50 0 x 00000050

  Bug Check 0 x 50: PAGE_FAULT_IN_NONPAGED_AREA
  https://msdn.Microsoft.com/en-us/library/ff559023%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

  BCCode: 50 0 x 00000050<-- read="" this="">
  * 1095.html? order = votes http://www.faultwire.com/solutions-fatal_error/page-fault-in-NONPAGED-Area-0x00000050-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• What are the repeated cases of blue screens? Can I fix?

  Pavilion P7-1036 Windows 7 64 Bit blue screens several times, almost every day since PC was bought and brought back.

  Error message: blue screen with "Windows has detected... and stop protecting your computer... If it's the first time... etc, etc, then long lines of 0 F x too long to copy down.»  Hours spent on the phone with HP support.

  Hello

  Have you tried a full restore of HP?  Backup your data on external media before that.  After the full restore, don't let the Microsoft automatic update process not apply the updates until you can determine if your PC is stable. There might be a bad update from Ms.

• When I log on my computer its is open for a minute and then a blue screen with error lights up and stops him. I can only log in safe mode of network.

  When I log on my computer its is open for a minute and then a blue screen with error lights and him stops

  I can only log in safe mode of network.

  original title: blue screen error

  If you can properly connect mode without failure, you can use "msconfig" to toggle various programs that load at startup.  Finally, find the one that is causing your program to crash.

  "How to solve configuration errors by using the System Configuration utility in Windows XP"
    <>http://support.Microsoft.com/kb/310560 >

  "System Configuration Utility overview"
    <>http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/msconfig_usage.mspx?mfr=true>

  HTH,
  JW

• I get the blue screen how can I get a recovery for my HP laptop cd?

  original title: I get the BSD how can I get a recovery for my HP laptop cd?

  Unable to start Vista, cannot restore the drive.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=au

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > find the latest Vista drivers for it > download/install the

  See you soon.

  Mick Murphy - Microsoft partner

• HP Pavilion Elite m9280a PC, blue screen now won't start!

  Hello

  My pc does not now start upward. It worked fine until the other day when I got a blue screen STOP error. Before that I could write the code that the computer tried to restart. It won't have the option to go in safe mode now, the hard drive light flashes on the front just once when you turn then just sits there, white light, solid screen. I am running Vista.

  Any help would be awsome as I am Flexi-rent this pc and do not want to pay for a computer I can't use even turned off!

  Thank you

  Pat

  P.S. I had a Vista disk when I got the PC.

  Pat1982,

  You should always have a recovery hard disk partition.

  When you turn on the computer, press F11 repeatedly until the system recovery begins. For more information, read this:

  http://support.HP.com/us-en/document/c00814731

  If/when you get all of this done, you must create a set of recovery disks and then perform the steps described in this article, to avoid possible future problems:

  http://support.HP.com/us-en/document/c01676224

• blue screen after replacing the battery and charger / need of Windows XP Pro disc

  Hi all.

  I bought a used laptop from gateway with Windows XP Professional already on it. The person I got it never gave me the disc of Windows or textbooks and it is out of warranty. I had to replace the battery and the charger after 3 months of use, and it now gives me the blue screen.  I can't enter in safe mode, it gives me just all sorts of codes for Win32 /? (different things). SYS. The blue screen also tells me if this keeps continues to go to F8(Advanced Options), and then choose the option. I called my local tech and he said contact Windows to get a disk to fix the problem. How can I do (I'm not a comp WIZ). So I try here to get any help. I am on a borrowed laptop so if you can help, please send me a personal email to * address email is removed from the privacy *. I get their

  After reading the owner's manual for the NX260X (Chpt. 7, p. 72-74) I am convinced that the laptop, as previously indicated above by PML, is originally came with Windows Vista.
  http://support.gateway.com/s/manuals/mobile/8511886.PDF

  In addition, according to the instructions of the manual recovery (pg.74, means only available recovery Windows are re - install using the supplied DVD.) This is meaningless given that bridge claims the recovery partition was part of laptop computers sold after November 2004.  I agree that, if you decide not to try to fix the errors, you should consider Windows 7.

  However, personally, I would try to fix the mistakes here before you spend a minimum of $100.00 for Windows 7. We usually have a pretty good success rate when the OP stays with the subject.